Active and passive transformation

In the active transformation (left), a point moves from position P to P' by rotating clockwise by an angle θ about the origin of the coordinate system. In the passive transformation (right), point P does not move, while the coordinate system rotates counterclockwise by an angle θ about its origin. The coordinates of P' in the active case (that is, relative to the original coordinate system) are the same as the coordinates of P relative to the rotated coordinate system.

In analytic geometry, spatial transformations in the 3-dimensional Euclidean space ${\displaystyle \mathbb {R} ^{3}}$ are distinguished into active or alibi transformations, and passive or alias transformations. An active transformation^[1] is a transformation which actually changes the physical position (alibi, elsewhere) of a point, or rigid body, which can be defined in the absence of a coordinate system; whereas a passive transformation^[2] is merely a change in the coordinate system in which the object is described (alias, other name) (change of coordinate map, or change of basis). By transformation, mathematicians usually refer to active transformations, while physicists and engineers could mean either. Both types of transformation can be represented by a combination of a translation and a linear transformation.

Put differently, a passive transformation refers to description of the same object in two different coordinate systems.^[3] On the other hand, an active transformation is a transformation of one or more objects with respect to the same coordinate system. For instance, active transformations are useful to describe successive positions of a rigid body. On the other hand, passive transformations may be useful in human motion analysis to observe the motion of the tibia relative to the femur, that is, its motion relative to a (local) coordinate system which moves together with the femur, rather than a (global) coordinate system which is fixed to the floor.^[3]

Example[]

Rotation considered as a passive (alias) or active (alibi) transformation

Translation and rotation as passive (alias) or active (alibi) transformations

As an example, let the vector ${\displaystyle \mathbf {v} =(v_{1},v_{2})\in \mathbb {R} ^{2}}$, be a vector in the plane. A rotation of the vector through an angle θ in counterclockwise direction is given by the rotation matrix:

${\displaystyle R={\begin{pmatrix}\cos \theta &-\sin \theta \\\sin \theta &\cos \theta \end{pmatrix}},}$

which can be viewed either as an active transformation or a passive transformation (where the above matrix will be inverted), as described below.

Spatial transformations in the Euclidean space R³[]

In general a spatial transformation ${\displaystyle T\colon \mathbb {R} ^{3}\to \mathbb {R} ^{3}}$ may consist of a translation and a linear transformation. In the following, the translation will be omitted, and the linear transformation will be represented by a 3×3 matrix ${\displaystyle T}$.

Active transformation[]

As an active transformation, ${\displaystyle T}$ transforms the initial vector ${\displaystyle \mathbf {v} =(v_{x},v_{y},v_{z})}$ into a new vector ${\displaystyle \mathbf {v} '=(v'_{x},v'_{y},v'_{z})=T\mathbf {v} =T(v_{x},v_{y},v_{z})}$.

If one views ${\displaystyle \{\mathbf {e} '_{x}=T(1,0,0),\ \mathbf {e} '_{y}=T(0,1,0),\ \mathbf {e} '_{z}=T(0,0,1)\}}$ as a new basis, then the coordinates of the new vector ${\displaystyle \mathbf {v} '=v_{x}\mathbf {e} '_{x}+v_{y}\mathbf {e} '_{y}+v_{z}\mathbf {e} '_{z}}$ in the new basis are the same as those of ${\displaystyle \mathbf {v} =v_{x}\mathbf {e} _{x}+v_{y}\mathbf {e} _{y}+v_{z}\mathbf {e} _{z}}$ in the original basis. Note that active transformations make sense even as a linear transformation into a different vector space. It makes sense to write the new vector in the unprimed basis (as above) only when the transformation is from the space into itself.

Passive transformation[]

On the other hand, when one views ${\displaystyle T}$ as a passive transformation, the initial vector ${\displaystyle \mathbf {v} =(v_{x},v_{y},v_{z})}$ is left unchanged, while the coordinate system and its basis vectors are transformed in the opposite direction, that is, with the inverse transformation ${\displaystyle T^{-1}}$.^[4] This gives a new coordinate system XYZ with basis vectors:

${\displaystyle \mathbf {e} _{X}=T^{-1}(1,0,0),\ \mathbf {e} _{Y}=T^{-1}(0,1,0),\ \mathbf {e} _{Z}=T^{-1}(0,0,1)}$

The new coordinates ${\displaystyle (v_{X},v_{Y},v_{Z})}$ of ${\displaystyle \mathbf {v} }$ with respect to the new coordinate system XYZ are given by:

${\displaystyle \mathbf {v} =(v_{x},v_{y},v_{z})=v_{X}e_{X}+v_{Y}e_{Y}+v_{Z}e_{Z}=T^{-1}(v_{X},v_{Y},v_{Z})}$.

From this equation one sees that the new coordinates are given by

${\displaystyle (v_{X},v_{Y},v_{Z})=T(v_{x},v_{y},v_{z})}$.

As a passive transformation ${\displaystyle T}$ transforms the old coordinates into the new ones.

Note the equivalence between the two kinds of transformations: the coordinates of the new point in the active transformation and the new coordinates of the point in the passive transformation are the same, namely

${\displaystyle (v_{X},v_{Y},v_{Z})=(v'_{x},v'_{y},v'_{z})}$.

See also[]

• Change of basis
• Covariance and contravariance of vectors
• Rotation of axes
• Translation of axes

References[]

• Dirk Struik (1953) Lectures on Analytic and Projective Geometry, page 84, Addison-Wesley.

External links[]

• UI ambiguity