Aprilia RS Cube

hideThis article has multiple issues. Please help or discuss these issues on the talk page. (Learn how and when to remove these template messages) The neutrality of this article is disputed. Relevant discussion may be found on the talk page. Please do not remove this message until conditions to do so are met. (September 2015) (Learn how and when to remove this template message) This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (September 2015) (Learn how and when to remove this template message) This article possibly contains original research. Please by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (September 2015) (Learn how and when to remove this template message) (Learn how and when to remove this template message)

Aprilia RS Cube

Manufacturer	Aprilia
Also called	Aprilia RS3
Production	2002-2004
Predecessor	Aprilia RSW-2 500
Successor	Aprilia RS-GP
Engine	990cc four-stroke Inline-triple
Weight	135kg (dry)

The RS Cube^[1][2] (often wrongly and redundantly referred as RS3 or RS3 Cube, due to the original lettering RS³) is a prototype race motorcycle that was developed by Aprilia to compete in the 2002 until 2004 MotoGP seasons. It was unveiled at the Bologna Motor Show in December 2001 by Aprilia's president, Ivano Beggio, and their race boss, Jan Witteveen. The Cube is powered by a 990 cc inline-3 four-stroke engine (to conform to MotoGP rules of that time). The engine was developed with large F1-derived input from Cosworth, bringing many features not previously seen in motorcycle development - this includes pneumatic valves, traction control and ride-by-wire.

On the bike's first outing in 2002 it showed promise and claimed the top speed in the early races. The highly innovative engine and control system was poorly matched with the chassis which was too stiff and unforgiving. Through the 2002 season a handful of updates were made and in 2003 a 3-2-1 exhaust system was added to effectively de-tune the engine. This was coupled with a change to a 6 injector fuel system and a host of calibration changes which transformed the feel of the bike. At this point Aprilia took over the engine development programme themselves and did not take any further development updates from Cosworth.

Despite early promise the bike was not a success; the innovation shown in the 2002 season with traction control and drive by wire is only now being perfected. The engine design and development was carried out by a small team at Cosworth Racing in Northampton and went from CAD to track in 8 months.

The engine was considered the most powerful at that time, producing about 225 bhp (168 kW).^{[citation needed]} A testbed that never was raced produced 235 bhp (175 kW) at one point, before Aprilia bowed out of MotoGP in 2004.

References[]

External links[]

• Aprilia RS Cube MotoGP bike reviewed by Motorcyclist Online

This motorcycle, scooter or moped-related article is a stub. You can help Wikipedia by .

• v
• t

This Motorcycle racing-related article is a stub. You can help Wikipedia by .

• v
• t