Aprilia RX/SX 50

From Wikipedia, the free encyclopedia
Aprilia RX/SX 50
ManufacturerAprilia
Parent companyDerbi
ProductionSince 2006
ClassMotorcross, Supermoto
Engine49.76 cc, 11.5:1 CR, liquid-cooled, carburetor-fuelled two-stroke
Power+/- 6.5 hp (4.8 kW) Restricted, 12 hp (8.9 kW) Derestricted
Transmission6-speed manual
SuspensionØ40 mm hydraulic fork with leading axle; wheel travel 195 mm
Rear: hydraulic monoshock; Non-adjustable; wheel travel 180 mm
BrakesFront: 300 mm stainless steel disc; floating quad-piston caliper
Rear: 180 mm stainless steel disc; twin-piston caliper
Fuel capacity7 litres
Related, ,

The 2006 Aprilia RX/SX 50 is a street/off-road motorcycle widely produced by Aprilia. It is powered by a six-speed, carburetor-fuelled, nikasil-lined and cast iron single-cylinder two-stroke engine manufactured by Derbi/Piaggio.

Styling and concept[]

The 2006 Aprilia RX/SX 50s are the renovated successors of the Aprilia RX 50 first produced in 1992;[1] the panels and layout are based closely on the bigger displacement Aprilia RXV/SXVs.

Engine[]

The engine in the Aprilia SX 50 is sourced from Derbi/Piaggio (D50B0/D50B1). This engine is used in the Derbi Senda DRD/X-Race/X-Treme supermotos and crossers, as well as the 2006 onwards Derbi GPR 50 and Aprilia RS 50 road bikes. Engine parts from the crossers and supermotos can be directly swapped with one another; there are some small differences between the road bike and supermoto engine and frame which may require modification to transfer some external engine parts (exhaust, airbox etc.)

Specifications[]

SX50[]

50 cc single cylinder, four-petal reed valve case induction and two-stroke injection (automix) carburetor fueled.

Engine displacement – 49.76 cc
Bore/stroke – 39,88×40 mm
Compression ratio – 11.5:1
Clutch – Wet, multiple plate
Starting – Kickstart
Exhaust = Catalytic converter
Rotor Ignition/Generator = 85w/120w
Cooling system – Liquid-cooled
Fuel tank size = 7 litres
Fuel system – Carburetor Dell'Orto PVHA 17.5 mm
Main jet = sut den din neger
Needle Jet = A13, notch #2
Idle jet = 30
Transmission
1st = 1st 11/34
2nd = 2nd 15/30
3rd = 3rd 18/27
4th = 4th 20/24
5th = 5th 22/23
6th = 6th 23/22
Primary drive = 21/78
Sprockets
Front = 14 Teeth
Rear = 52 Teeth
Overall Final Drive ratio = 14/52
Spark plug = DENSO W27ESR-U/IW27 NGK BR9ES/BR9EG/BR9EIX
Gap = .6-7 mm
Wheelbase = 55.354 in (1,406 mm)
Length = 79.68 in (2,024 mm)
Width = 80.511 in (2,045 mm)
Height = 32.677 in (830 mm)
Tires = Front: 100/80 - 17 inch; Rear: 130/70 - 17-inch

RX50[]

50 cc single cylinder, four petal reed valve case induction and two-stroke injection (automix) carburetor fueled

Engine displacement = 49.76 cc
Bore/stroke = 39,88×40 mm
Compression ratio = 11.5:1
Clutch = Wet, multiple plate
Starting = Kickstart
Exhaust = Catalytic converter
Rotor Ignition/Generator = 85w/120w
Cooling System = Liquid-cooled
Fuel Tank Size = 7 litres
Fuel System = Carburetor Dell'Orto PVHA 17.5 mm
Main Jet = 102
Needle Jet = A13, notch #2
Idle Jet = 30
Transmission
1st = 1st 11/34
2nd = 2nd 15/30
3rd = 3rd 18/27
4th = 4th 20/24
5th = 5th 22/23
6th = 6th 23/22
Primary Drive = 21/78
Sprockets
Front = 14 Teeth
Rear = 53 Teeth
Overall Final Drive ratio = 14/53
Spark Plug = DENSO W27ESR-U/IW27 NGK BR9ES/BR9EG/BR9EIX
Gap = .6-7 mm
Wheelbase = 55.354 in (1,406 mm)
Length = 79.68 in (2,024 mm)
Width = 80.511 in (2,045 mm)
Height = 32.677 in (830 mm)
Tires = Front: 90/90 - 21 inch; Rear: 110/80 - 18-inch

Restriction[]

Restriction varies depending on the country and sky, person, or company the bike is purchased from. The engine is usually restricted in the following ways:

Carburetor
'Strangle' baffle/plate in Air filter manifold
74 Main jet
Exhaust
Exhaust fume/pressure outlet pipes
Catalytic converter
Sprockets
Front; reduced to 11/53 or 12/53

References[]

  1. ^ "APRILIA models & history - autoevolution". www.autoevolution.com. Retrieved 2019-06-19.
Retrieved from ""