Bandini 1300

This article has multiple issues. Please help or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article may be too technical for most readers to understand. Please to make it understandable to non-experts, without removing the technical details. (January 2018) (Learn how and when to remove this template message) This article needs additional citations for verification. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (January 2021) (Learn how and when to remove this template message) (Learn how and when to remove this template message)

The Bandini 1300 was a racing car built in 1980 by Bandini Cars in Forlì, Italy.

It was presented in 1980 as new sports prototype in red and blue livery, divided by a thin gold colour line. Later Bandini decided to replace the blue with white as it appears today.

It was the last car with which he opened Ilario Bandini, organiser, the edition 1981 of the race uphill "Predappio-Rocca delle Camminate" that had already won several times.

The innovative features compared to previous production are mainly in search propeller 1300 cc.

The engine[]

The engine Bandini 1300 16 V installed.

The engine displacement was equal to 1300 cc, patterned after the previous experience on a Fiat monoblock. It was constructed fully from aluminium by Bandini and features a dry sump lubrication, chain distribution, double overhead camshafts, and 16 valves. The fuel injection is mechanical, and all is hooked up to a five-speed manual gearbox.^[1]

• Positioning: longitudinal rear, 4-cylinder in-line
• Materials and particularity: base monoblock to 5 media bench and league sump in aluminium, Head alloy DOHC distribution chain, four valves per cylinder vertical
• Bore: 86 mm (3.4 in)
• Stroke: 55.5 mm (2.2 in)
• Displacement: 1,289 cc
• Power: fuel injection mechanical valve guillotine
• Lubricate: Dry sump lubrication
• Cooling: forced liquid with centrifugal pump controlled by pulley and belt, cooler on the front
• Gearbox and clutch: 5 speed + RG clutch dry discs
• Ignition and electrical equipment: coil and distributor on the head with electronic, battery 12 V and alternator

The chassis[]

The frame is an evolution of 1000 sports prototype that has gone before.

• Structure and material: frame of mixed section tubes round and rectangular tubes, special steel
• Suspension:
  • Front: Independent, triangles overlapping with shock hydraulic telescopic tilted and springs cylindrical helical coaxial; bar stabilizing, camber recordable
  • Rear: Independent, triangle and lower arms swinging shock hydraulic telescopic inclined agents on the triangle lower bar stabilizing, camber, caster and convergence recordable
• Braking system:
  • Service: hydraulics, disc front and rear
• Steering: a rack and pinion
• Guide: left
• Wheels: Alloy Bandini
• Fuel tank: 2 x 40 L (11 US gal; 9 imp gal)
• Transmission: and return rear halfshaft reached with omocinetici

The body[]

Bandini Sport 1300

Bandini Sport 1300

The bodywork is made of composite material and epoxy resin matrix fibre glass, except for the two side panels in aluminium fixed to the frame through rivets. This allows a further reduction of weight that can be used as ballast. Compared to younger sister, the air-intake on the front and venting, are less pronounced, however the rear wing, monoplane to impact adjustable, is larger and the fairing also closes the rear of the engine compartment to the air incanalando radiator of the oil. Small openings elliptical on the front provide for the cooling of the disc brakes front and rear tyres and brakes receive grids prepared the same purpose.

See also[]

• Ilario Bandini
• Bandini Cars

References[]

Wikimedia Commons has media related to Bandini 1300.