Bayesian programming

This article relies too much on references to primary sources. Please improve this by adding secondary or tertiary sources. (August 2016) (Learn how and when to remove this template message)

Part of a series on
Bayesian statistics
Theory
Admissible decision rule Bayesian efficiency Bayesian epistemology Bayesian probability Probability interpretations Bayes' theorem Bayes factor Bayesian inference Bayesian network Prior Posterior Likelihood Conjugate prior Posterior predictive Hyperparameter Hyperprior Principle of indifference Principle of maximum entropy Empirical Bayes method Cromwell's rule Bernstein–von Mises theorem Schwarz criterion Credible interval Maximum a posteriori estimation Radical probabilism
Techniques
Bayesian linear regression Bayesian estimator Approximate Bayesian computation Markov chain Monte Carlo
Mathematics portal
v t

Part of a series on statistics
Probability theory
Probability Axioms Determinism System Indeterminism Randomness
Probability space Sample space Event Collectively exhaustive events Elementary event Mutual exclusivity Outcome Singleton Experiment Bernoulli trial Probability distribution Bernoulli distribution Binomial distribution Normal distribution Probability measure Random variable Bernoulli process Continuous or discrete Expected value Markov chain Observed value Random walk Stochastic process
Complementary event Joint probability Marginal probability Conditional probability
Independence Conditional independence Law of total probability Law of large numbers Bayes' theorem Boole's inequality
Venn diagram Tree diagram
v t

Bayesian programming is a formalism and a methodology for having a technique to specify probabilistic models and solve problems when less than the necessary information is available.

Edwin T. Jaynes proposed that probability could be considered as an alternative and an extension of logic for rational reasoning with incomplete and uncertain information. In his founding book Probability Theory: The Logic of Science^[1] he developed this theory and proposed what he called “the robot,” which was not a physical device, but an inference engine to automate probabilistic reasoning—a kind of Prolog for probability instead of logic. Bayesian programming^[2] is a formal and concrete implementation of this "robot".

Bayesian programming may also be seen as an algebraic formalism to specify graphical models such as, for instance, Bayesian networks, dynamic Bayesian networks, Kalman filters or hidden Markov models. Indeed, Bayesian Programming is more general than Bayesian networks and has a power of expression equivalent to probabilistic factor graphs.^[3]

Formalism[]

A Bayesian program is a means of specifying a family of probability distributions.

The constituent elements of a Bayesian program are presented below:^[4]

${\displaystyle {\text{Program}}{\begin{cases}{\text{Description}}{\begin{cases}{\text{Specification}}(\pi ){\begin{cases}{\text{Variables}}\\{\text{Decomposition}}\\{\text{Forms}}\\\end{cases}}\\{\text{Identification (based on }}\delta )\end{cases}}\\{\text{Question}}\end{cases}}}$

1. A program is constructed from a description and a question.
2. A description is constructed using some specification (${\displaystyle \pi }$) as given by the programmer and an identification or learning process for the parameters not completely specified by the specification, using a data set (${\displaystyle \delta }$).
3. A specification is constructed from a set of pertinent variables, a decomposition and a set of forms.
4. Forms are either parametric forms or questions to other Bayesian programs.
5. A question specifies which probability distribution has to be computed.

Description[]

The purpose of a description is to specify an effective method of computing a joint probability distribution on a set of variables ${\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}}$ given a set of experimental data ${\displaystyle \delta }$ and some specification ${\displaystyle \pi }$. This joint distribution is denoted as: ${\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)}$.^[5]

To specify preliminary knowledge ${\displaystyle \pi }$, the programmer must undertake the following:

1. Define the set of relevant variables ${\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}}$ on which the joint distribution is defined.
2. Decompose the joint distribution (break it into relevant independent or conditional probabilities).
3. Define the forms of each of the distributions (e.g., for each variable, one of the list of probability distributions).

Decomposition[]

Given a partition of ${\displaystyle \left\{X_{1},X_{2},\ldots ,X_{N}\right\}}$ containing ${\displaystyle K}$ subsets, ${\displaystyle K}$ variables are defined ${\displaystyle L_{1},\cdots ,L_{K}}$, each corresponding to one of these subsets. Each variable ${\displaystyle L_{k}}$ is obtained as the conjunction of the variables ${\displaystyle \left\{X_{k_{1}},X_{k_{2}},\cdots \right\}}$ belonging to the ${\displaystyle k^{th}}$ subset. Recursive application of Bayes' theorem leads to:

${\displaystyle {\begin{aligned}&P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\wedge \cdots \wedge L_{K}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\mid \delta \wedge \pi \right)\times P\left(L_{2}\mid L_{1}\wedge \delta \wedge \pi \right)\times \cdots \times P\left(L_{K}\mid L_{K-1}\wedge \cdots \wedge L_{1}\wedge \delta \wedge \pi \right)\end{aligned}}}$

Conditional independence hypotheses then allow further simplifications. A conditional independence hypothesis for variable ${\displaystyle L_{k}}$ is defined by choosing some variable ${\displaystyle X_{n}}$ among the variables appearing in the conjunction ${\displaystyle L_{k-1}\wedge \cdots \wedge L_{2}\wedge L_{1}}$, labelling ${\displaystyle R_{k}}$ as the conjunction of these chosen variables and setting:

${\displaystyle P\left(L_{k}\mid L_{k-1}\wedge \cdots \wedge L_{1}\wedge \delta \wedge \pi \right)=P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)}$

We then obtain:

${\displaystyle {\begin{aligned}&P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)\\={}&P\left(L_{1}\mid \delta \wedge \pi \right)\times P\left(L_{2}\mid R_{2}\wedge \delta \wedge \pi \right)\times \cdots \times P\left(L_{K}\mid R_{K}\wedge \delta \wedge \pi \right)\end{aligned}}}$

Such a simplification of the joint distribution as a product of simpler distributions is called a decomposition, derived using the chain rule.

This ensures that each variable appears at the most once on the left of a conditioning bar, which is the necessary and sufficient condition to write mathematically valid decompositions.^{[citation needed]}

Forms[]

Each distribution ${\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)}$ appearing in the product is then associated with either a parametric form (i.e., a function ${\displaystyle f_{\mu }\left(L_{k}\right)}$) or a question to another Bayesian program ${\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)=P\left(L\mid R\wedge {\widehat {\delta }}\wedge {\widehat {\pi }}\right)}$.

When it is a form ${\displaystyle f_{\mu }\left(L_{k}\right)}$, in general, ${\displaystyle \mu }$ is a vector of parameters that may depend on ${\displaystyle R_{k}}$ or ${\displaystyle \delta }$ or both. Learning takes place when some of these parameters are computed using the data set ${\displaystyle \delta }$.

An important feature of Bayesian Programming is this capacity to use questions to other Bayesian programs as components of the definition of a new Bayesian program. ${\displaystyle P\left(L_{k}\mid R_{k}\wedge \delta \wedge \pi \right)}$ is obtained by some inferences done by another Bayesian program defined by the specifications ${\displaystyle {\widehat {\pi }}}$ and the data ${\displaystyle {\widehat {\delta }}}$. This is similar to calling a subroutine in classical programming and provides an easy way to build hierarchical models.

Question[]

Given a description (i.e., ${\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)}$), a question is obtained by partitioning ${\displaystyle \left\{X_{1},X_{2},\cdots ,X_{N}\right\}}$ into three sets: the searched variables, the known variables and the free variables.

The 3 variables ${\displaystyle Searched}$, ${\displaystyle Known}$ and ${\displaystyle Free}$ are defined as the conjunction of the variables belonging to these sets.

A question is defined as the set of distributions:

${\displaystyle P\left(Searched\mid {\text{Known}}\wedge \delta \wedge \pi \right)}$

made of many "instantiated questions" as the cardinal of ${\displaystyle Known}$, each instantiated question being the distribution:

${\displaystyle P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)}$

Inference[]

Given the joint distribution ${\displaystyle P\left(X_{1}\wedge X_{2}\wedge \cdots \wedge X_{N}\mid \delta \wedge \pi \right)}$, it is always possible to compute any possible question using the following general inference:

${\displaystyle {\begin{aligned}&P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)\\={}&\sum _{\text{Free}}\left[P\left({\text{Searched}}\wedge {\text{Free}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)\right]\\={}&{\frac {\displaystyle \sum _{\text{Free}}\left[P\left({\text{Searched}}\wedge {\text{Free}}\wedge {\text{Known}}\mid \delta \wedge \pi \right)\right]}{\displaystyle P\left({\text{Known}}\mid \delta \wedge \pi \right)}}\\={}&{\frac {\displaystyle \sum _{\text{Free}}\left[P\left({\text{Searched}}\wedge {\text{Free}}\wedge {\text{Known}}\mid \delta \wedge \pi \right)\right]}{\displaystyle \sum _{{\text{Free}}\wedge {\text{Searched}}}\left[P\left({\text{Searched}}\wedge {\text{Free}}\wedge {\text{Known}}\mid \delta \wedge \pi \right)\right]}}\\={}&{\frac {1}{Z}}\times \sum _{\text{Free}}\left[P\left({\text{Searched}}\wedge {\text{Free}}\wedge {\text{Known}}\mid \delta \wedge \pi \right)\right]\end{aligned}}}$

where the first equality results from the marginalization rule, the second results from Bayes' theorem and the third corresponds to a second application of marginalization. The denominator appears to be a normalization term and can be replaced by a constant ${\displaystyle Z}$.

Theoretically, this allows to solve any Bayesian inference problem. In practice, however, the cost of computing exhaustively and exactly ${\displaystyle P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)}$ is too great in almost all cases.

Replacing the joint distribution by its decomposition we get:

${\displaystyle {\begin{aligned}&P\left({\text{Searched}}\mid {\text{Known}}\wedge \delta \wedge \pi \right)\\={}&{\frac {1}{Z}}\sum _{\text{Free}}\left[\prod _{k=1}^{K}\left[P\left(L_{i}\mid K_{i}\wedge \pi \right)\right]\right]\end{aligned}}}$

which is usually a much simpler expression to compute, as the dimensionality of the problem is considerably reduced by the decomposition into a product of lower dimension distributions.

Example[]

Bayesian spam detection[]

The purpose of Bayesian spam filtering is to eliminate junk e-mails.

The problem is very easy to formulate. E-mails should be classified into one of two categories: non-spam or spam. The only available information to classify the e-mails is their content: a set of words. Using these words without taking the order into account is commonly called a bag of words model.

The classifier should furthermore be able to adapt to its user and to learn from experience. Starting from an initial standard setting, the classifier should modify its internal parameters when the user disagrees with its own decision. It will hence adapt to the user's criteria to differentiate between non-spam and spam. It will improve its results as it encounters increasingly classified e-mails.

Variables[]

The variables necessary to write this program are as follows:

1. ${\displaystyle Spam}$: a binary variable, false if the e-mail is not spam and true otherwise.
2. ${\displaystyle W_{0},W_{1},\ldots ,W_{N-1}}$: ${\displaystyle N}$ binary variables. ${\displaystyle W_{n}}$ is true if the ${\displaystyle n^{th}}$ word of the dictionary is present in the text.

These ${\displaystyle N+1}$ binary variables sum up all the information about an e-mail.

Decomposition[]

Starting from the joint distribution and applying recursively Bayes' theorem we obtain:

${\displaystyle {\begin{aligned}&P({\text{Spam}}\wedge W_{0}\wedge \cdots \wedge W_{N-1})\\={}&P({\text{Spam}})\times P(W_{0}\mid {\text{Spam}})\times P(W_{1}\mid {\text{Spam}}\wedge W_{0})\\&\times \cdots \\&\times P\left(W_{N-1}\mid {\text{Spam}}\wedge W_{0}\wedge \cdots \wedge W_{N-2}\right)\end{aligned}}}$

This is an exact mathematical expression.

It can be drastically simplified by assuming that the probability of appearance of a word knowing the nature of the text (spam or not) is independent of the appearance of the other words. This is the naive Bayes assumption and this makes this spam filter a naive Bayes model.

For instance, the programmer can assume that:

${\displaystyle P(W_{1}\mid {\text{Spam}}\land W_{0})=P(W_{1}\mid {\text{Spam}})}$

to finally obtain:

${\displaystyle P({\text{Spam}}\land W_{0}\land \ldots \land W_{N-1})=P({\text{Spam}})\prod _{n=0}^{N-1}[P(W_{n}\mid {\text{Spam}})]}$

This kind of assumption is known as the naive Bayes' assumption. It is "naive" in the sense that the independence between words is clearly not completely true. For instance, it completely neglects that the appearance of pairs of words may be more significant than isolated appearances. However, the programmer may assume this hypothesis and may develop the model and the associated inferences to test how reliable and efficient it is.

Parametric forms[]

To be able to compute the joint distribution, the programmer must now specify the ${\displaystyle N+1}$ distributions appearing in the decomposition:

1. ${\displaystyle P({\text{Spam}})}$ is a prior defined, for instance, by ${\displaystyle P([{\text{Spam}}=1])=0.75}$
2. Each of the ${\displaystyle N}$ forms ${\displaystyle P(W_{n}\mid {\text{Spam}})}$ may be specified using Laplace rule of succession (this is a pseudocounts-based smoothing technique to counter the zero-frequency problem of words never-seen-before):
   1. ${\displaystyle P(W_{n}\mid [{\text{Spam}}={\text{false}}])={\frac {1+a_{f}^{n}}{2+a_{f}}}}$
   2. ${\displaystyle P(W_{n}\mid [{\text{Spam}}={\text{true}}])={\frac {1+a_{t}^{n}}{2+a_{t}}}}$

where ${\displaystyle a_{f}^{n}}$ stands for the number of appearances of the ${\displaystyle n^{th}}$ word in non-spam e-mails and ${\displaystyle a_{f}}$ stands for the total number of non-spam e-mails. Similarly, ${\displaystyle a_{t}^{n}}$ stands for the number of appearances of the ${\displaystyle n^{th}}$ word in spam e-mails and ${\displaystyle a_{t}}$ stands for the total number of spam e-mails.

Identification[]

The ${\displaystyle N}$ forms ${\displaystyle P(W_{n}\mid {\text{Spam}})}$ are not yet completely specified because the ${\displaystyle 2N+2}$ parameters ${\displaystyle a_{f}^{n=0,\ldots ,N-1}}$, ${\displaystyle a_{t}^{n=0,\ldots ,N-1}}$, ${\displaystyle a_{f}}$ and ${\displaystyle a_{t}}$ have no values yet.

The identification of these parameters could be done either by batch processing a series of classified e-mails or by an incremental updating of the parameters using the user's classifications of the e-mails as they arrive.

Both methods could be combined: the system could start with initial standard values of these parameters issued from a generic database, then some incremental learning customizes the classifier to each individual user.

Question[]

The question asked to the program is: "what is the probability for a given text to be spam knowing which words appear and don't appear in this text?" It can be formalized by:

${\displaystyle P({\text{Spam}}\mid w_{0}\wedge \cdots \wedge w_{N-1})}$

which can be computed as follows:

${\displaystyle {\begin{aligned}&P({\text{Spam}}\mid w_{0}\wedge \cdots \wedge w_{N-1})\\={}&{\frac {\displaystyle P({\text{Spam}})\prod _{n=0}^{N-1}[P(w_{n}\mid {\text{Spam}})]}{\displaystyle \sum _{\text{Spam}}[P({\text{Spam}})\prod _{n=0}^{N-1}[P(w_{n}\mid {\text{Spam}})]]}}\end{aligned}}}$

The denominator appears to be a normalization constant. It is not necessary to compute it to decide if we are dealing with spam. For instance, an easy trick is to compute the ratio:

${\displaystyle {\begin{aligned}&{\frac {P([{\text{Spam}}={\text{true}}]\mid w_{0}\wedge \cdots \wedge w_{N-1})}{P([{\text{Spam}}={\text{false}}]\mid w_{0}\wedge \cdots \wedge w_{N-1})}}\\={}&{\frac {P([{\text{Spam}}={\text{true}}])}{P([{\text{Spam}}={\text{false}}])}}\times \prod _{n=0}^{N-1}\left[{\frac {P(w_{n}\mid [{\text{Spam}}={\text{true}}])}{P(w_{n}\mid [{\text{Spam}}={\text{false}}])}}\right]\end{aligned}}}$

This computation is faster and easier because it requires only ${\displaystyle 2N}$ products.

Bayesian program[]

The Bayesian spam filter program is completely defined by:

${\displaystyle \Pr {\begin{cases}Ds{\begin{cases}Sp(\pi ){\begin{cases}Va:{\text{Spam}},W_{0},W_{1}\ldots W_{N-1}\\Dc:{\begin{cases}P({\text{Spam}}\land W_{0}\land \ldots \land W_{n}\land \ldots \land W_{N-1})\\=P({\text{Spam}})\prod _{n=0}^{N-1}P(W_{n}\mid {\text{Spam}})\end{cases}}\\Fo:{\begin{cases}P({\text{Spam}}):{\begin{cases}P([{\text{Spam}}={\text{false}}])=0.25\\P([{\text{Spam}}={\text{true}}])=0.75\end{cases}}\\P(W_{n}\mid {\text{Spam}}):{\begin{cases}P(W_{n}\mid [{\text{Spam}}={\text{false}}])\\={\frac {1+a_{f}^{n}}{2+a_{f}}}\\P(W_{n}\mid [{\text{Spam}}={\text{true}}])\\={\frac {1+a_{t}^{n}}{2+a_{t}}}\end{cases}}\\\end{cases}}\\\end{cases}}\\{\text{Identification (based on }}\delta )\end{cases}}\\Qu:P({\text{Spam}}\mid w_{0}\land \ldots \land w_{n}\land \ldots \land w_{N-1})\end{cases}}}$

Bayesian filter, Kalman filter and hidden Markov model[]

Bayesian filters (often called Recursive Bayesian estimation) are generic probabilistic models for time evolving processes. Numerous models are particular instances of this generic approach, for instance: the Kalman filter or the Hidden Markov model (HMM).

Variables[]

• Variables ${\displaystyle S^{0},\ldots ,S^{T}}$ are a time series of state variables considered to be on a time horizon ranging from ${\displaystyle 0}$ to ${\displaystyle T}$.
• Variables ${\displaystyle O^{0},\ldots ,O^{T}}$ are a time series of observation variables on the same horizon.

Decomposition[]

The decomposition is based:

• on ${\displaystyle P(S^{t}\mid S^{t-1})}$, called the system model, transition model or dynamic model, which formalizes the transition from the state at time ${\displaystyle t-1}$ to the state at time ${\displaystyle t}$;
• on ${\displaystyle P(O^{t}\mid S^{t})}$, called the observation model, which expresses what can be observed at time ${\displaystyle t}$ when the system is in state ${\displaystyle S^{t}}$;
• on an initial state at time ${\displaystyle 0}$: ${\displaystyle P(S^{0}\wedge O^{0})}$.

Parametrical forms[]

The parametrical forms are not constrained and different choices lead to different well-known models: see Kalman filters and Hidden Markov models just below.

Question[]

The typical question for such models is ${\displaystyle P\left(S^{t+k}\mid O^{0}\wedge \cdots \wedge O^{t}\right)}$: what is the probability distribution for the state at time ${\displaystyle t+k}$ knowing the observations from instant ${\displaystyle 0}$ to ${\displaystyle t}$?

The most common case is Bayesian filtering where ${\displaystyle k=0}$, which searches for the present state, knowing past observations.

However, it is also possible ${\displaystyle (k>0)}$, to extrapolate a future state from past observations, or to do smoothing ${\displaystyle (k<0)}$, to recover a past state from observations made either before or after that instant.

More complicated questions may also be asked as shown below in the HMM section.

Bayesian filters ${\displaystyle (k=0)}$ have a very interesting recursive property, which contributes greatly to their attractiveness. ${\displaystyle P\left(S^{t}|O^{0}\wedge \cdots \wedge O^{t}\right)}$ may be computed simply from ${\displaystyle P\left(S^{t-1}\mid O^{0}\wedge \cdots \wedge O^{t-1}\right)}$ with the following formula:

${\displaystyle {\begin{array}{ll}&P\left(S^{t}|O^{0}\wedge \cdots \wedge O^{t}\right)\\=&P\left(O^{t}|S^{t}\right)\times \sum _{S^{t-1}}\left[P\left(S^{t}|S^{t-1}\right)\times P\left(S^{t-1}|O^{0}\wedge \cdots \wedge O^{t-1}\right)\right]\end{array}}}$

Another interesting point of view for this equation is to consider that there are two phases: a prediction phase and an estimation phase:

• During the prediction phase, the state is predicted using the dynamic model and the estimation of the state at the previous moment:

${\displaystyle {\begin{array}{ll}&P\left(S^{t}|O^{0}\wedge \cdots \wedge O^{t-1}\right)\\=&\sum _{S^{t-1}}\left[P\left(S^{t}|S^{t-1}\right)\times P\left(S^{t-1}|O^{0}\wedge \cdots \wedge O^{t-1}\right)\right]\end{array}}}$

• During the estimation phase, the prediction is either confirmed or invalidated using the last observation:

${\displaystyle {\begin{aligned}&P\left(S^{t}\mid O^{0}\wedge \cdots \wedge O^{t}\right)\\={}&P\left(O^{t}\mid S^{t}\right)\times P\left(S^{t}|O^{0}\wedge \cdots \wedge O^{t-1}\right)\end{aligned}}}$

Bayesian program[]

${\displaystyle Pr{\begin{cases}Ds{\begin{cases}Sp(\pi ){\begin{cases}Va:\\S^{0},\cdots ,S^{T},O^{0},\cdots ,O^{T}\\Dc:\\{\begin{cases}&P\left(S^{0}\wedge \cdots \wedge S^{T}\wedge O^{0}\wedge \cdots \wedge O^{T}|\pi \right)\\=&P\left(S^{0}\wedge O^{0}\right)\times \prod _{t=1}^{T}\left[P\left(S^{t}|S^{t-1}\right)\times P\left(O^{t}|S^{t}\right)\right]\end{cases}}\\Fo:\\{\begin{cases}P\left(S^{0}\wedge O^{0}\right)\\P\left(S^{t}|S^{t-1}\right)\\P\left(O^{t}|S^{t}\right)\end{cases}}\end{cases}}\\Id\end{cases}}\\Qu:\\{\begin{cases}{\begin{array}{l}P\left(S^{t+k}|O^{0}\wedge \cdots \wedge O^{t}\right)\\\left(k=0\right)\equiv {\text{Filtering}}\\\left(k>0\right)\equiv {\text{Prediction}}\\\left(k<0\right)\equiv {\text{Smoothing}}\end{array}}\end{cases}}\end{cases}}}$

Kalman filter[]

The very well-known Kalman filters^[6] are a special case of Bayesian filters.

They are defined by the following Bayesian program:

${\displaystyle Pr{\begin{cases}Ds{\begin{cases}Sp(\pi ){\begin{cases}Va:\\S^{0},\cdots ,S^{T},O^{0},\cdots ,O^{T}\\Dc:\\{\begin{cases}&P\left(S^{0}\wedge \cdots \wedge O^{T}|\pi \right)\\=&\left[{\begin{array}{c}P\left(S^{0}\wedge O^{0}|\pi \right)\\\prod _{t=1}^{T}\left[P\left(S^{t}|S^{t-1}\wedge \pi \right)\times P\left(O^{t}|S^{t}\wedge \pi \right)\right]\end{array}}\right]\end{cases}}\\Fo:\\{\begin{cases}P\left(S^{t}\mid S^{t-1}\wedge \pi \right)\equiv G\left(S^{t},A\bullet S^{t-1},Q\right)\\P\left(O^{t}\mid S^{t}\wedge \pi \right)\equiv G\left(O^{t},H\bullet S^{t},R\right)\end{cases}}\end{cases}}\\Id\end{cases}}\\Qu:\\P\left(S^{T}\mid O^{0}\wedge \cdots \wedge O^{T}\wedge \pi \right)\end{cases}}}$

• Variables are continuous.
• The transition model ${\displaystyle P(S^{t}\mid S^{t-1}\wedge \pi )}$ and the observation model ${\displaystyle P(O^{t}\mid S^{t}\wedge \pi )}$ are both specified using Gaussian laws with means that are linear functions of the conditioning variables.

With these hypotheses and by using the recursive formula, it is possible to solve the inference problem analytically to answer the usual ${\displaystyle P(S^{T}\mid O^{0}\wedge \cdots \wedge O^{T}\wedge \pi )}$ question. This leads to an extremely efficient algorithm, which explains the popularity of Kalman filters and the number of their everyday applications.

When there are no obvious linear transition and observation models, it is still often possible, using a first-order Taylor's expansion, to treat these models as locally linear. This generalization is commonly called the extended Kalman filter.

Hidden Markov model[]

Hidden Markov models (HMMs) are another very popular specialization of Bayesian filters.

They are defined by the following Bayesian program:

${\displaystyle \Pr {\begin{cases}Ds{\begin{cases}Sp(\pi ){\begin{cases}Va:\\S^{0},\ldots ,S^{T},O^{0},\ldots ,O^{T}\\Dc:\\{\begin{cases}&P\left(S^{0}\wedge \cdots \wedge O^{T}\mid \pi \right)\\=&\left[{\begin{array}{c}P\left(S^{0}\wedge O^{0}\mid \pi \right)\\\prod _{t=1}^{T}\left[P\left(S^{t}\mid S^{t-1}\wedge \pi \right)\times P\left(O^{t}\mid S^{t}\wedge \pi \right)\right]\end{array}}\right]\end{cases}}\\Fo:\\{\begin{cases}P\left(S^{0}\wedge O^{0}\mid \pi \right)\equiv {\text{Matrix}}\\P\left(S^{t}\mid S^{t-1}\wedge \pi \right)\equiv {\text{Matrix}}\\P\left(O^{t}\mid S^{t}\wedge \pi \right)\equiv {\text{Matrix}}\end{cases}}\end{cases}}\\Id\end{cases}}\\Qu:\\\max _{S^{1}\wedge \cdots \wedge S^{T-1}}\left[P\left(S^{1}\wedge \cdots \wedge S^{T-1}\mid S^{T}\wedge O^{0}\wedge \cdots \wedge O^{T}\wedge \pi \right)\right]\end{cases}}}$

• Variables are treated as being discrete.
• The transition model ${\displaystyle P\left(S^{t}\mid S^{t-1}\wedge \pi \right)}$ and the observation model ${\displaystyle P\left(O^{t}\mid S^{t}\wedge \pi \right)}$ are

both specified using probability matrices.

• The question most frequently asked of HMMs is:

${\displaystyle \max _{S^{1}\wedge \cdots \wedge S^{T-1}}\left[P\left(S^{1}\wedge \cdots \wedge S^{T-1}\mid S^{T}\wedge O^{0}\wedge \cdots \wedge O^{T}\wedge \pi \right)\right]}$

What is the most probable series of states that leads to the present state, knowing the past observations?

This particular question may be answered with a specific and very efficient algorithm called the Viterbi algorithm.

The Baum–Welch algorithm has been developed for HMMs.

Applications[]

Academic applications[]

Since 2000, Bayesian programming has been used to develop both robotics applications and life sciences models.^[7]

Robotics[]

In robotics, bayesian programming was applied to autonomous robotics,^{[8][9][10][11][12]} robotic CAD systems,^[13] advanced driver-assistance systems,^[14] robotic arm control, mobile robotics,^[15][16] human-robot interaction,^[17] human-vehicle interaction (Bayesian autonomous driver models)^{[18][19][20][21][22]} video game avatar programming and training ^[23] and real-time strategy games (AI).^[24]

Life sciences[]

In life sciences, bayesian programming was used in vision to reconstruct shape from motion,^[25] to model visuo-vestibular interaction^[26] and to study saccadic eye movements;^[27] in speech perception and control to study early speech acquisition^[28] and the emergence of articulatory-acoustic systems;^[29] and to model handwriting perception and control.^[30]

Pattern recognition[]

Bayesian program learning has potential applications voice recognition and synthesis, image recognition and natural language processing. It employs the principles of compositionality (building abstract representations from parts), causality (building complexity from parts) and learning to learn (using previously recognized concepts to ease the creation of new concepts).^[31]

Possibility theories[]

The comparison between probabilistic approaches (not only bayesian programming) and possibility theories continues to be debated.

Possibility theories like, for instance, fuzzy sets,^[32] fuzzy logic^[33] and possibility theory^[34] are alternatives to probability to model uncertainty. They argue that probability is insufficient or inconvenient to model certain aspects of incomplete/uncertain knowledge.

The defense of probability is mainly based on Cox's theorem, which starts from four postulates concerning rational reasoning in the presence of uncertainty. It demonstrates that the only mathematical framework that satisfies these postulates is probability theory. The argument is that any approach other than probability necessarily infringes one of these postulates and the value of that infringement.

Probabilistic programming[]

The purpose of probabilistic programming is to unify the scope of classical programming languages with probabilistic modeling (especially bayesian networks) to deal with uncertainty while profiting from the programming languages' expressiveness to encode complexity.

Extended classical programming languages include logical languages as proposed in Probabilistic Horn Abduction,^[35] Independent Choice Logic,^[36] PRISM,^[37] and ProbLog which proposes an extension of Prolog.

It can also be extensions of functional programming languages (essentially Lisp and Scheme) such as IBAL or CHURCH. The underlying programming languages can be object-oriented as in BLOG and FACTORIE or more standard ones as in CES and FIGARO.^[38]

The purpose of Bayesian programming is different. Jaynes' precept of "probability as logic" argues that probability is an extension of and an alternative to logic above which a complete theory of rationality, computation and programming can be rebuilt.^[1] Bayesian programming attempts to replace classical languages with a programming approach based on probability that considers incompleteness and uncertainty.

The precise comparison between the semantics and power of expression of Bayesian and probabilistic programming is an open question.

See also[]

References[]

Further reading[]

• Kamel Mekhnacha (2013). Bayesian Programming. Chapman and Hall/CRC. doi:10.1201/b16111. ISBN 978-1-4398-8032-6.

External links[]

• A companion site to the Bayesian programming book where to download ProBT an inference engine dedicated to Bayesian programming.^{[permanent dead link]}
• The Bayesian-programming.org site Archived 2013-11-23 at archive.today for the promotion of Bayesian programming with detailed information and numerous publications.