Botryoidal Spring
Botryoidal Spring | |
---|---|
Location | Lower Geyser Basin, Yellowstone National Park, Teton County, Wyoming |
Coordinates | 44°32′06″N 110°47′58″W / 44.534882°N 110.7995285°WCoordinates: 44°32′06″N 110°47′58″W / 44.534882°N 110.7995285°W[1] |
Elevation | 7,335 feet (2,236 m) |
Type | Geyser |
Eruption height | 10 feet (3.0 m)[2] |
Frequency | 3-5 minutes[2] |
Duration | one minute[2] |
Temperature | 42.2 °C (108.0 °F)[1] |
Botryoidal Spring is a fountain-type geyser in the Lower Geyser Basin of Yellowstone National Park in the United States.
Botryoidal Spring is part of the White Creek Group, which includes A-0 Geyser and Spindle Geyser. As the name indicates, Botryoidal Spring was originally known as a hot spring. The term botryoidal refers to the subspherical, grape-like geyserite structures around the vent. In 1996, seismic activity resulted in the sparkling spring changing to an active geyser.
It erupts for about one minute. Intervals (= eruption start to eruption start) are 3 to 5 minutes. The fountain reaches a height of 10 feet (3 m).[2]
Immediately after an eruption, the pool is quiet. With no warning, eruptions start with a broad, moderately noisy burst. Smaller bursting continues for less than a minute. Eruptions may start with a blue bubble, caused by a large steam bubble rising from below the water surface.
References[]
- ^ a b "Botryoidal Spring". Yellowstone Geothermal Features Database. Montana State University.
- ^ a b c d "White Creek Group". Geyser Observation and Study Association (GOSA). Retrieved 2005-09-20.
External links[]
- "Image of Botryoidal Spring erupting". Archived from the original on 2006-03-21. Retrieved September 20, 2005.
- Geysers of Wyoming
- Geothermal features of Teton County, Wyoming
- Geothermal features of Yellowstone National Park
- Geysers of Teton County, Wyoming