Bristol Centaurus

From Wikipedia, the free encyclopedia

Centaurus
Bristol.centaurus.arp.750pix.jpg
Bristol Centaurus engine cutaway
Type Piston aircraft engine
Manufacturer Bristol Aeroplane Company
First run July 1938
Major applications Hawker Tempest
Bristol Brabazon
Vickers Warwick
Hawker Sea Fury
Airspeed Ambassador
Number built c. 2,500

The Centaurus was the final development of the Bristol Engine Company's series of sleeve valve radial aircraft engines. The Centaurus is an 18-cylinder, two-row design that eventually delivered over 3,000 hp (2,200 kW). The engine was introduced into service late in the Second World War and was one of the most powerful aircraft piston engines to see service. The Royal Navy Historic Flight operates a Hawker Sea Fury, powered by a Bristol Centaurus engine.

Design and development[]

Like most Bristol Engines designs, the Centaurus was based on the mechanicals of an earlier design, in this case the "classic" 5.75 in (146 mm) piston from their original 1918 Jupiter. The Jupiter piston was in use in the contemporary 14-cylinder Hercules, which was being brought into production when the design of the Centaurus started.

Sleeve valve closeup

The Centaurus had a cylinder swept volume of 3,272 cu in (53.6 L), nearly as much as the American 3,347.9 cu in (54.9 L) Wright R-3350 Duplex-Cyclone large radial, making the Centaurus one of the largest aircraft piston engines to enter production, while that of the Hercules was 2,363 cu in (38.7 L). The nearly 40 percent higher capacity was achieved by increasing the stroke from 6.5 to 7 in (170 to 180 mm) and by changing to two rows of nine cylinders instead of two rows of seven. The diameter of the Centaurus was only just over 6 percent greater than the Hercules in spite of its much greater swept volume.[1]

The cylinder heads had an indentation like an inverted top hat, which was finned, but it was difficult to get air down into this hollow to adequately cool the head. During development, the engineers contacted ICI Metals Division, Birmingham, to enquire whether a copper-chromium alloy with higher thermal conductivity would have sufficient high temperature strength to be used for this purpose. Tests were successful and with the same volume of cylinder, these modified heads enabled the horsepower per cylinder to be raised from 110 hp (82 kW) to 220 hp (160 kW).

Bristol maintained the Centaurus from type-testing in 1938, but production did not start until 1942, owing to the need to get the Hercules into production and improve the reliability of the entire engine line.[1] Nor was there any real need for the larger engine at this early point in the war, when most military aircraft designs were intended to mount engines around 1,000 hp (746 kW). The Hercules's approximately 1,500 hp (1,119 kW) was better suited to the existing airframes.

The Centaurus did not see service until near the end of the war, first appearing on the Vickers Warwick. Other wartime, or postwar, uses included the Bristol Brigand and Buckmaster, Hawker Tempest and Sea Fury and the Blackburn Firebrand and Beverley. The engine also saw post-war use in civilian airliners, including the ill-fated Bristol Brabazon. By the end of the war in Europe, around 2,500 examples of the Centaurus had been produced by Bristol.[1]

The 373 was the most powerful version of the Centaurus and was intended for the Blackburn Beverley transport aircraft. Using direct fuel injection, it achieved a remarkable 3,220 hp (2,400 kW), but was never fitted.[2] A projected enlarged capacity version of the Centaurus was designed by Sir Roy Fedden; cylinders were produced for this engine, but it was never built. Known as the Bristol Orion, a name used previously for a variant of the Jupiter engine and later re-used for a turboprop, this development was also a two-row, 18 cylinder sleeve valve engine, with the displacement increased to 4,142 cu in (67.9 L)} (6.25 in × 7.5 in (159 mm × 191 mm)), nearly as large as the American Pratt & Whitney R-4360 Wasp Major four-row, 28-cylinder radial, the largest displacement aviation radial engine ever placed in quantity production.[3]

Variants[]

The Centaurus was produced in 34 variants, ranging from the 2,000 hp (1,500 kW) Centaurus I to the final 2,405 hp (1,793 kW) Centaurus 663 for the Airspeed Ambassador airliner. The most powerful variants to enter service were the 2,625 hp (1,957 kW) Centaurus 170, 173, 660, 661 and 662.[4]

Applications[]

Bristol Centaurus powered Fairey Spearfish

Note:[5]

Survivors[]

The Royal Navy Historic Flight operates a Hawker Sea Fury powered by a Bristol Centaurus.[6]

Engines on display[]

Preserved Bristol Centaurus engines are on public display at the following museums:

Specifications (Centaurus VII)[]

A Centaurus with cylinders removed exposing the sleeve valves.

Data from Lumsden[7]

General characteristics

  • Type: 18-cylinder, air-cooled, two-row radial engine
  • Bore: 5.75 in (146 mm)
  • Stroke: 7.00 in (178 mm)
  • Displacement: 3,270 cu in (53.6 l)
  • Diameter: 55.3 in (1,400 mm)
  • Dry weight: 2,695 lb (1,222 kg)

Components

Performance

See also[]

Related development

Comparable engines

Related lists

References[]

Notes[]

  1. ^ Jump up to: a b c Bridgman (Jane's) 1998, p. 270.
  2. ^ Flight, 11 May 1956 Retrieved: 12 December 2014
  3. ^ Gunston 2006, p.152.
  4. ^ Lumsden 2003, pp.125-128.
  5. ^ List from Lumsden
  6. ^ Royal Navy Historic Flight - Aircraft Archived 15 June 2009 at the Wayback Machine Retrieved: 5 August 2009
  7. ^ Lumsden 2003, p.125.

Bibliography[]

  • Bridgman, L, (ed.) (1998) Jane's Fighting Aircraft of World War II. Crescent. ISBN 0-517-67964-7
  • Gunston, Bill. Development of Piston Aero Engines. Cambridge, UK. Patrick Stephens, 2006. ISBN 0-7509-4478-1
  • Gunston, Bill. World Encyclopedia of Aero Engines: From the Pioneers to the Present Day. 5th edition, Stroud, UK: Sutton, 2006.ISBN 0-7509-4479-X
  • Lumsden, Alec. British Piston Engines and Their Aircraft. Marlborough, UK: Airlife Publishing, 2003. ISBN 1-85310-294-6.
  • White, Graham. Allied Aircraft Piston Engines of World War II: History and Development of Frontline Aircraft Piston Engines Produced by Great Britain and the United States During World War II. Warrendale, Pennsylvania: SAE International, 1995. ISBN 1-56091-655-9

External links[]

Retrieved from ""