Centimetre

From Wikipedia, the free encyclopedia
centimetre
CarpentersRule.png
A carpenter's ruler with centimetre divisions
General information
Unit systemmetric
Unit oflength
Symbolcm
Conversions
1 cm in ...... is equal to ...
   SI units   10 mm
   imperial & US system   ~0.3937 in
Different lengths as in respect to the Electromagnetic spectrum, measured by the Metre and its deriveds scales. The Microwave are in-between 1 meter to 1 millimeter.

A centimetre (international spelling) or centimeter (American spelling) (SI symbol cm) is a unit of length in the metric system, equal to one hundredth of a metre, centi being the SI prefix for a factor of 1/100.[1] The centimetre was the base unit of length in the now deprecated centimetre–gram–second (CGS) system of units.

Though for many physical quantities, SI prefixes for factors of 103—like milli- and kilo-—are often preferred by technicians, the centimetre remains a practical unit of length for many everyday measurements. A centimetre is approximately the width of the fingernail of an average adult person.

Equivalence to other units of length[]

1 centimetre = 10 millimetres
= 0.01 metres
= 0.393700787401574803149606299212598425196850 inches
 (There are exactly 2.54 centimetres in one inch.)

One millilitre is defined as one cubic centimetre, under the SI system of units.

Other uses[]

In addition to its use in the measurement of length, the centimetre is used:

  • sometimes, to report the level of rainfall as measured by a rain gauge[2]
  • in the CGS system, the centimetre is used to measure capacitance, where 1 cm of capacitance = 1.113×10−12 farads[3]
  • in maps, centimetres are used to make conversions from map scale to real world scale (kilometres)
  • to represent second moment of areas (cm4)
  • as the inverse of the kayser, a CGS unit, and thus a non-SI metric unit of wavenumber: 1 kayser = 1 wave per centimetre; or, more generally, (wavenumber in kaysers) = 1/(wavelength in centimetres). The SI unit of wavenumber is the inverse metre, m−1.

Unicode symbols[]

For the purposes of compatibility with Chinese, Japanese and Korean (CJK) characters, Unicode has symbols for:[4]

  • centimetre (㎝) – code 339D
  • square centimetre (㎠) – code 33A0
  • cubic centimetre (㎤) – code 33A4

They are mostly used only with East Asian fixed-width CJK fonts, because they are equal in size to one Chinese character.

See also[]

References[]

  1. ^ "Decimal multiples and submultiples of SI units". Bureau International des Poids et Mesures. 2014. Retrieved 5 July 2015.
  2. ^ Rain Measurement, Rain Gauge, Wireless Rain Gauge, Rain Gage, Rain Gauge Data
  3. ^ Capacitance - from Eric Weisstein's World of Physics
  4. ^ CJK Compatibility excerpt from The Unicode Standard, Version 10.0.
Retrieved from ""