Chasseur-class destroyer
A postcard of Chasseur at anchor
| |
Class overview | |
---|---|
Name | Chasseur class |
Operators | |
Preceded by | Voltigeur class |
Succeeded by | Bouclier class |
Built | 1909–1910 |
In commission | 1909–1927 |
Completed | 4 |
Lost | 1 |
Scrapped | 3 |
General characteristics | |
Type | Destroyer |
Displacement | |
Length | 64.2–65.4 m (210 ft 8 in–214 ft 7 in) (p/p) |
Beam | 6.5–6.7 m (21 ft 4 in–22 ft 0 in) |
Draft | 3.1 m (10 ft 2 in) |
Installed power |
|
Propulsion | 3 shafts; 3 steam turbines |
Speed | 28 knots (52 km/h; 32 mph) |
Range | 1,400–1,500 nmi (2,600–2,800 km; 1,600–1,700 mi) at 10 knots (19 km/h; 12 mph) |
Complement | 77–79 |
Armament |
|
The Chasseur class consisted of four destroyers built for the French Navy during the first decade of the twentieth century. They saw service during the First World War. One ship was sunk during the war and the survivors were scrapped afterwards. A fifth ship was sold to Peru.[1]
Design and description[]
The Chasseur class was based on the earlier Spahi class, albeit with oil-fired boilers.[2] They had an length between perpendiculars of 64.2–65.4 meters (210 ft 8 in–214 ft 7 in), a beam of 6.5–6.7 meters (21 ft 4 in–22 ft 0 in),[3] and a draft of 3.1 meters (10 ft 2 in). Designed to displaced 450 metric tons (443 long tons), the ships displaced 520 t (512 long tons) at deep load. Their crews numbered 77–179 men.[2]
The destroyers were powered by three Parsons direct-drive steam turbines, each driving one propeller shafts using steam provided by four water-tube boilers of two different types. The engines were designed to produce 7,200 shaft horsepower (5,400 kW) which was intended to give the ships a speed of 28 knots (52 km/h; 32 mph); during their sea trials, the destroyers demonstrated speeds of 28.6–31 knots (53.0–57.4 km/h; 32.9–35.7 mph). The ships carried 135 t (133 long tons) of fuel oil (Cavalier still used coal) which gave them a range of 1,520 nautical miles (2,820 km; 1,750 mi) at a cruising speed of 10 knots (19 km/h; 12 mph).[4]
The primary armament of the Chasseur-class ships consisted of six 65-millimeter (2.6 in) Modèle 1902 guns in single mounts, one each fore and aft of the superstructure and the others were distributed amidships. They were also fitted with three 450-millimeter (17.7 in) torpedo tubes. One of these was in a fixed mount in the bow and the other two were on single rotating mounts amidships.[2]
Ships[]
Name | Builder | Launched | Fate |
---|---|---|---|
Chasseur | Chantiers et Ateliers Augustin Normand, Le Havre | 20 February 1909 | Struck, October 1919. |
Schneider et Cie, Chalon-sur-Saône | 1909 | Sold incomplete to Peru as BAP Teniente Rodríguez in 1911; hulked in 1939.[1] | |
Cavalier | Normand, Le Havre | 9 May 1910 | Training ship from 1914. Struck, December 1927. |
Fantassin | Forges et Chantiers de la Méditerranée, La Seyne-sur-Mer | 17 June 1909 | Sunk after collision with Mameluck, 5 June 1916. |
Janissaire | Ateliers et Chantiers de Penhoët, Saint-Nazaire | 12 April 1910 | Struck, October 1920. |
References[]
Bibliography[]
- Couhat, Jean Labayle (1974). French Warships of World War I. London: Ian Allan. ISBN 0-7110-0445-5.
- Gardiner, Robert & Gray, Randal (1985). Conway's All The World's Fighting Ships 1906–1921. London: Conway Maritime Press. ISBN 0-85177-245-5.
- Osborne, Eric W. (2005). Destroyers - An Illustrated History of Their Impact. Santa Barbara, California: ABC-Clio. ISBN 1-85109-479-2.
- Roche, Jean-Michel (2005). "Classement par types". Dictionnaire des bâtiments de la flotte de guerre française de Colbert à nos jours 2, 1870 - 2006. Toulon: Roche. ISBN 978-2-9525917-0-6. OCLC 165892922.
External links[]
Wikimedia Commons has media related to Chasseur-class destroyer. |
- Destroyer classes
- Destroyers of the French Navy
- World War I destroyers of France
- Destroyers of the Peruvian Navy
- Chasseur-class destroyers