Chillicothe Subdivision
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Chillicothe Subdivision or "Chillicothe Sub" (slang "Chilli Sub") is a railway line[1] running about 229 miles (369 km) from Chicago, Illinois to Fort Madison, Iowa in the United States of America. It is operated by BNSF Railway[2] as part of their Southern Transcon route from Chicago to Los Angeles. The Chillicothe Subdivision is a high volume route connecting three principal yards in Chicago (Corwith, Willow Springs,[3] and Logistics Park Chicago) in the east and the Marceline Subdivision in the west which continues to Kansas City.
Construction and physical structure[]
The Chillicothe Subdivision was constructed in segments beginning in 1873 by railroads that fell under the influence of and later merged into the Atchison, Topeka and Santa Fe Railway; with the first tracks laid between Streator, Illinois and Ancona, Illinois by the Chicago, Pekin and Southwestern Railroad. The line opened to traffic between Kansas City and Chicago in 1888.[4] This line is double tracked for its entire length and crosses the Mississippi River between Fort Madison, Iowa and Niota, Illinois on a double track swing bridge (Fort Madison Toll Bridge).
The Chillicothe Subdivision makes numerous connections with other BNSF mainlines including the Ottumwa, Mendota, Barstow, Brookfield and Peoria Subdivisions within the Galesburg terminal complex. The route runs parallel to the Hannibal Subdivision for a short distance within the city of Fort Madison but there is not an active connection between them as traffic from Galesburg to St Louis is routed over the Brookfield Subdivision. Principal connections with other carriers include the Norfolk Southern at Streator and the CSX Blue Island Subdivision in Chicago near Corwith. As a former AT&SF route, mileposts are counted from the former Dearborn Station in Chicago although track was abandoned east of the CSX connection in 1996.[5]
In 2019, a direct connection was completed between the Chillicothe Subdivision and the Chicago Subdivision which will allow the former BN and AT&SF lines to exchange traffic between Corwith and Cicero Yards without hazardous and time consuming backup movements.[6] This project was completed as part of the Chicago Region Environmental and Transportation Efficiency Program (CREATE) Western Avenue corridor designed to align rail movements through the city along Western Avenue [7]
Freight operations[]
 | This section does not cite any sources. (November 2021) |
Traffic on the line is dominated by intermodal traffic flowing to and from the three yards in Chicago in a mixture of high priority "Z-Trains" with freight from UPS, FedEx Ground and LTL trucking firms; "Q-Trains" guaranteed intermodal with primarily domestic shippers like JB Hunt and Schneider frequently seen; and lower priority "S-Trains" with ocean containers. The names reflect BNSF current train symbol methodology although in radio communications trains are usually referred to by their lead locomotive's number.
There are also frequent run through trains in partnership with eastern railroads. Intermodal trains can frequently be quite long with consists up to 16,000 feet being run on the Southern Transcon route since it is predominantly doubletracked across its entire length. In 2021 increasing numbers of unit trains carrying wind turbine parts have been seen as well.
The Union Pacific has trackage rights over BNSF lines from Chicago to Kansas City and uses the Chillicothe Subdivision to reach its Global 4 intermodal facility near Joliet, Illinois.
Passenger operations[]
This line was home to AT&SF passenger traffic in the pre Amtrak era, but passenger trains have been routed over the ex-Burlington Northern (CB&Q) Mendota Subdivision from Chicago to Galesburg since 1996.[8] The Southwest Chief currently joins the Chillicothe Subdivision at the Cameron Connection west of Galesburg, before making a stop in Ft. Madison and continuing west on the Marceline Subdivision.
On December 15, 2021 Amtrak moved the Fort Madison passenger station from the historic division and crew change point, known as Shopton, within the Fort Madison yard to the prior AT&SF Fort Madison station on the Chillicothe Subdivision.[9]
Railfaning[]
As of 2021, the are two Virtual Railfan webcams which can be used to monitor traffic on the line. The Static Cam and Pan/Tilt/Zoom "PTZ" cam, are mounted near the Chillicothe Subdivision overlooking the Fort Madison Toll Bridge, the Atchison, Topeka and Santa Fe Passenger and Freight Complex Historic District, Riverview Park and the Mississippi river. This can be used to monitor traffic on the line, as well as the briefly parallel Hannibal Subdivision.[10]
The former AT&SF 2913 is preserved in Riverview park and is visible from the Camera
References[]
- ^ BNSF Track Segments (pp 442-448)
- ^ Ingles, J. David (2001). Guide to North American Railroad Hot Spots. Kalmbach Publishing. ISBN 9780890243732.
- ^ BNSF Willow Springs accessed March 28, 2021
- ^ BNSF Line Segment History
- ^ Trains Magazine April 2014, map
- ^ BNSF Horseshoe Project Complete
- ^ Create Program
- ^ "Galesburg to Streator" accessed March 28, 2021
- ^ Amtrack is back in Ft Madison assessed December 31, 2021
- ^ Virtual Railfan(registration required)
External links[]
- BNSF Railway lines