Chloro(pyridine)cobaloxime

From Wikipedia, the free encyclopedia
Chloro(pyridine)cobaloxime(III)
Structure of Chloro(pyridine)cobaloxime fixed.png
Sample of Chloro(pyridine)cobaloxime(III).jpg
Names
Other names
Chloro(pyridine)bis(dimethylglyoximato)cobalt(III), Chloro(N,N'-dihydroxy-2,3-butanediimine-κ2N,N')(N-hydroxy-2,3-butanediiminato-κ2N,N')(methanol)cobalt - pyridine (1:1)
Identifiers
  • 23295-32-1
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.153.977 Edit this at Wikidata
EC Number
  • 625-485-1
  • InChI=1S/2C2H6N2.2ClH.Co/c2*3-1-2-4;;;/h2*3-4H,1-2H2;2*1H;/q2*-2;;;+2/p-2
    Key: CZHYJYFFRNANOP-DSUIRYESSA-M
  • InChI=1S/C9H17N4O4.C5H5N.ClH.Co/c1-6(10)7(2)11-16-19-17-13-9(4)8(3)12-15-18-14-5;1-2-4-6-5-3-1;;/h1-5H3;1-5H;1H;/q-1;;; 2/p-1/b11-7 ,12-8 ,13-9 ;;;
  • CO[H]O\N1=C(/C)\C(\C)=N2\O[H]O\N3=C(/C)\C(\C)=N/[Co]123Cl.c1ccccn1
Properties
C13H19ClCoN5O4
Molar mass 403.71 g·mol−1
Appearance yellow-brown solid
insoluble
Hazards
GHS labelling:
GHS07: Exclamation mark
Signal word
 Warning
H315, H319, H335
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY  (what is checkY☒N ?)
Infobox references

Chloro(pyridine)cobaloxime is a coordination compound containing a CoIII center with octahedral coordination. It has been considered as a model compound of vitamin B12 for studying the properties and mechanism of action of the vitamin. It belongs to a class of bis(dimethylglyoximato)cobalt(III) complexes with different axial ligands, called cobaloximes.[1] Chloro(pyridine)cobaloxime is a yellow-brown powder that is sparingly soluble in most solvents, including water.

Structure[]

The complex adopts a distorted octahedral geometry. Cobalt(III) is bound to two dimethylglyoximate ligands, i.e., mono-deprotonated dimethylglyoxime, in the equatorial plane. Completing the coordination sphere are chloride and a pyridine at the axial positions.[2]

Reactions[]

The cobaloxime is slowly decomposed by acids and bases. With acids, the products of decomposition are dimethylglyoxime, cobalt salts, and pyridine; with bases, derivatives of other cobaloximes are formed, usually with the release of chloride ions.

The complex has no reaction with hydrogen gas, and cannot carry oxygen as salcomine does. It would, however, react with hydrogen in the presence of sodium hydroxide, a catalytic amount of platinum metal, or a reduced cobaloxime, therefore once the reduction occurs, the hydrogenation would occur much more rapidly as there is autocatalysis.

The reduction products of cobaloxime depends on the conditions. At pH near 7, a cobaloxime with a CoII center is formed. With a higher pH, the cobalt center would be further reduced to the CoI state, which is supernucleophilic.[3]

Preparation[]

The compound is usually prepared by mixing cobalt(II) chloride, dimethylglyoxime and pyridine in an ethanolic solution. This process afford the cobaloxime(II), which is subsequently oxidized by the oxygen in air:[3]

4 CoCl2•6H2O + 8 dmgH2 + 8 py + O2 → 4 ClCo(dmgH)2py + 4 py•HCl + 14 H2O

Using cobalt(II) acetate in place of cobalt(II) chloride produce aceto(pyridine)cobaloxime. This acetate can be converted to the respective bromide, iodide, cyanate, cyanide, azide and thiocyanate.[3]

(CH3COO)Co(DH)2py + NaX → XCo(DH)2py + NaCH3COO (X = Br, I, CNO, CN, N3 or SCN)

Reactions[]

The pyridine base in the axial position can also be replaced by other organic bases containing a sp2 hybridized N atom as well. Commonly used bases are morpholine, 4-methylpyridine, imidazole and benzimidazole. The derivatives are again prepared via diacetocobaloxime, followed by the addition of the desired base, such as imidazole.

(CH3COO)2Co(DH)2 + imi → (CH3COO)Co(DH)2imi

Alkylation of Co[]

One of the methods used for producing the Co-C bond is to make use of the supernucleophilicity of the CoI center. Chloro(pyridine)cobaloxime(III) is first reduced to Chloro(pyridine)cobaloxime(I) by sodium borohydride in alkaline solution, then an alkyl halide is added into the reaction mixture, and the desired Co-C bond is formed via a SN2 reaction. This method can be used to produce cobaloximes containing a primary or a secondary alkyl substituent.

For derivatives with phenyl or vinyl substituent, the Grignard reaction is employed. However, since the dimethylglyoxime ligands contains two acidic H atoms in the oxime group, the Grignard reagent must be used in three-fold excess to compensate the loss.[3]

References[]

  1. ^ Jonathan W. Steed; Jerry L. Atwood (2009). Supramolecular Chemistry, 2nd edition. Wiley. p. 808. ISBN 978-0-470-51233-3.
  2. ^ Geremia, Silvano; Dreos, Renata; Randaccio, Lucio; Tauzher, Giovanni (February 1994). "Evidence of the interaction between steric and electronic influence in rhodoximes and cobaloximes. Syntehsis of pyRh(DH)2I and X-ray structure of pyRh(DH)2Cl and pyRh(DH)2I". Inorganica Chimica Acta. Trieste, Italy: Elsevier B.V. 216 (1–2): 125–129. doi:10.1016/0020-1693(93)03708-I.
  3. ^ a b c d G. N. Schrauzer (1968). Bis(dimethylglyoximato)cobalt complexes (Cobaloximes) - A. Chloro(pyridine)cobaloxime(III). Inorganic Syntheses. XI. pp. 62–64. doi:10.1002/9780470132425. ISBN 9780470132425.
Retrieved from ""