Duncan River (British Columbia)

From Wikipedia, the free encyclopedia
For other uses, see Duncan River (disambiguation).
Duncan River
Location
CountryCanada
ProvinceBritish Columbia
DistrictKootenay Land District
Physical characteristics
SourceNear Mount Dawson
 • locationPurcell Trench
MouthKootenay River
 • location
Kootenay Lake
 • coordinates
50°10′44″N 116°56′8″W / 50.17889°N 116.93556°W / 50.17889; -116.93556Coordinates: 50°10′44″N 116°56′8″W / 50.17889°N 116.93556°W / 50.17889; -116.93556[1]
Length206 km (128 mi)[2]
Basin size2,443 km2 (943 sq mi)[3]
Discharge 
 • locationBelow Lardeau River[4]
 • average162 m3/s (5,700 cu ft/s)[4]
 • minimum12.8 m3/s (450 cu ft/s)
 • maximum807 m3/s (28,500 cu ft/s)

The Duncan River is a 128-mile (206 km) long[2] river in the Canadian province of British Columbia. Its drainage basin is 2,443 square kilometres (943 sq mi) in area.[3] It is part of the Columbia River basin, being tributary via Kootenay Lake to the Kootenay River, which is a tributary of the Columbia River. It forms part of the boundary between the Selkirk Mountains, to its west, and the Purcell Mountains, to its east (the boundary northwards is the Beaver River).

Course[]

The Duncan River originates at a pass between Mount Duncan of the Selkirk Mountains and Silent Mountain in the Purcell Mountains and flows south through the Purcell Trench. It flows into Duncan Lake, a natural lake that has been enlarged by Duncan Dam.[3] A short distance below the dam, the Duncan River is joined by the , its largest single tributary. From here the river continues south to join the Kootenay River at the North Arm of Kootenay Lake.[1]

History[]

Duncan River was named for John ("Jack") Duncan, a prospector and candidate for the colonial Legislative Council from the Kootenay Land District in the 1866.[5]

On some early maps Duncan Lake is shown with the name "Upper Kootenay Lake" or "Howser Lake", but since 1912 the name Duncan has prevailed.[5]

Before Duncan Dam was built the river served as the main navigation route into the valley, used by mining and logging industries. The route was navigable via Kootenay Lake as far as Bonner's Ferry, Idaho, on the Kootenai River.[6]

Duncan Dam was finished in 1967, the first of the three Canadian Columbia River Treaty dams to be built. Its purpose is to regulate flow into Kootenay Lake, in coordination with Libby Dam, to assure sufficient water flow for the Kootenay Canal and Corra Linn Dam projects. Duncan Dam does not produce any electricity. Duncan Lake, originally 25 kilometres (16 mi) in length, is now 45 kilometres (28 mi) long.[6]

References[]

  1. ^ Jump up to: a b "Duncan River". BC Geographical Names.
  2. ^ Jump up to: a b "The Rivers - Stories". Balance of Power. 2007. Archived from the original on November 6, 2011. Retrieved September 3, 2008.
  3. ^ Jump up to: a b c "Duncan Dam Project Water Use Plan" (PDF). BC Hydro. 2005. Retrieved September 3, 2008.[dead link]
  4. ^ Jump up to: a b "Archived Hydrometric Data Search". Water Survey of Canada. Archived from the original on February 21, 2009. Retrieved October 19, 2008. Search for Station 08NH118 Duncan River below Lardeau River
  5. ^ Jump up to: a b "Duncan Lake". BC Geographical Names.
  6. ^ Jump up to: a b Duncan Dam Archived 2008-09-17 at the Wayback Machine, Touchstones Nelson, Museum of Art and History
Retrieved from ""