Groove (joinery)

This article does not cite any sources. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (December 2009) (Learn how and when to remove this template message)

A through groove (left) and a stopped groove

In joinery, a groove is a slot or trench cut into a member which runs parallel to the grain. A groove is thus differentiated from a dado, which runs across the grain.

Grooves are used for a range of purposes in cabinet making and other woodworking fields. Typically, grooves are used to house the panels in frame and panel construction and the bottoms of drawers. For more structural construction, grooves are created along the sides and/or ends of panels, such as in tongue and groove construction. Applications include roofing, siding and flooring.

A groove may be through, meaning that it passes all the way through the surface and its ends are open, or stopped, meaning that one or both of the ends finish before the groove meets edge of the surface.

Methods[]

A groove can be cut by the following methods:

• electric router using a straight or rebate bit
• circular saw with multiple passes (depending on width and depth)
• dado set in a single pass
• spindle moulder (wood shaper)
• hand saw and chisel
• router plane

See also[]

• Dado (joinery)
• Tongue and groove
• Woodworking joints