Heathcote Junction railway station

From Wikipedia, the free encyclopedia

Heathcote Junction
PTV regional rail station
Heathcote Junction Railway Station.jpg
Southbound view from Platform 1 in October 2017
LocationEpping-Kilmore Road,
Heathcote Junction, Victoria 3758
Shire of Mitchell
Australia
Coordinates37°22′05″S 145°01′33″E / 37.36806°S 145.02583°E / -37.36806; 145.02583Coordinates: 37°22′05″S 145°01′33″E / 37.36806°S 145.02583°E / -37.36806; 145.02583
Owned byVicTrack
Operated byV/Line
Line(s)North East
Distance53.45 kilometres from Southern Cross
Platforms2 side
Tracks3
Construction
Structure typeGround
Bicycle facilitiesYes
Disabled accessYes
Other information
StatusOperational, Unstaffed
Station codeHCJ
Fare zoneMyki Zone 2
WebsitePublic Transport Victoria
History
Opened17 March 1890
Rebuilt1990
Previous namesKilmore Junction
Services
Preceding station V/Line Following station
Wallan Seymour line Wandong
towards Seymour
Shepparton line
Limited service
Wandong
towards Shepparton
Former services
Preceding station   Disused railways   Following station
Junction   Heathcote line   Towards Kilmore, Heathcote and Bendigo

Heathcote Junction railway station is located on the North East line in Victoria, Australia. It serves the town of Heathcote Junction, and it opened on 17 March 1890 as Kilmore Junction. It was renamed Heathcote Junction on 15 May 1922.[1]

History[]

A crossing loop, named Summit, was opened at the location in November 1885, but closed in January 1886, after duplication works on the North East line were completed. Soon after, surveyors planning the route of a branch line to Kilmore, and later to Heathcote, selected the site as the junction of the branch.[2]

In 1887, a junction was provided for construction trains on the new Kilmore line, which branched off to the west of the station, passing behind the Down platform, with the points facing Melbourne. In 1888, a signal box, named Kilmore Junction, opened on the eastern side of the main line, but a station was not provided until March 1890. It had only small passenger shelters and no goods facilities.[3] Even though the branch line was extended north-west to Heathcote, and thence to Bendigo in 1890, the station was not renamed Heathcote Junction until 15 May 1922.[2][3]

In 1950, flashing light signals were provided at the Escrites Road level crossing, located nearby in the Down direction of the station.[1] By 1958, the Up platform (Platform 1) was reduced in length, from 376 feet to 150 feet.[3]

In 1962, the Melbourne-Albury standard gauge line opened. It ran behind Platform 1, so the signal box had to be replaced by a new structure to the west of the main lines. It was located on Platform 2 at the Up end of the station, between the main line and the branch line.[3] The branch line closed in 1968,[2] with the signal box following in 1970. The signal box was demolished in February 1973,[4] although the foundations can still be seen today.[3]

In 1990, the present station shelters were provided. In 1998, boom barriers were provided at the Escrites Road level crossing.[3]

The pedestrian crossing at the Up end of the station was upgraded in 2006/2007.[5]

Platforms and services[]

Heathcote Junction has two side platforms. It is serviced by V/Line Seymour line and limited Shepparton line services. Selected Shepparton line services run express through the station.[6]

Platform 1:

Platform 2:

References[]

  1. ^ a b Heathcote Junction Vicsig
  2. ^ a b c Turton, Keith W (1973). Six And A Half Inches From Destiny. Australian Railway Historical Society. p. 89. ISBN 0-85849-012-9.
  3. ^ a b c d e f Andrew Waugh. "Victorian Station Histories - Heathcote Junction" (PDF). VR History. Retrieved 24 December 2008.
  4. ^ "Way and Works". Newsrail. Australian Railway Historical Society. May 1973. p. 92.
  5. ^ "Public transport - Completed railway pedestrian crossing upgrades". Department of Transport. www.doi.vic.gov.au. Archived from the original on 4 June 2009. Retrieved 24 December 2008.
  6. ^ Seymour - Melbourne Public Transport Victoria

External links[]

Retrieved from ""