List of International Organization for Standardization standards, 10000-10999

From Wikipedia, the free encyclopedia
  (Redirected from )

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.[2]

ISO 10000 – ISO 10999[]

  • ISO/IEC TR 10000 Information technology – Framework and taxonomy of International Standardized Profiles
    • ISO/IEC TR 10000-1:1998 Part 1: General principles and documentation framework
    • ISO/IEC TR 10000-2:1998 Part 2: Principles and Taxonomy for OSI Profiles
    • ISO/IEC TR 10000-3:1998 Part 3: Principles and Taxonomy for Open System Environment Profiles
  • :2007 Quality management – Customer satisfaction – Guidelines for codes of conduct for organizations
  • :2014 Quality management – Customer satisfaction – Guidelines for complaints handling in organizations
  • :2007 Quality management – Customer satisfaction – Guidelines for dispute resolution external to organizations
  • :2008 Quality management – Customer satisfaction – Guidelines for monitoring and measuring
  • ISO 10005:2005 Quality management systems – Guidelines for quality plans
  • ISO 10006:2003 Quality management systems – Guidelines for quality management in projects
  • ISO 10007:2017 Quality management systems – Guidelines for configuration management
  • ISO 10008:2013 Quality management – Customer satisfaction – Guidelines for business-to-consumer electronic commerce transactions
  • ISO 10012:2003 Measurement management systems – Requirements for measurement processes and measuring equipment
  • :2001 Guidelines for quality management system documentation
  • ISO 10014:2006 Quality management – Guidelines for realizing financial and economic benefits
  • :1999 Quality management – Guidelines for training
  • :2003 Guidance on statistical techniques for ISO 9001:2000
  • :2012 Quality management – Guidelines on people involvement and competence
  • :2005 Guidelines for the selection of quality management system consultants and use of their services
  • ISO/IEC 10021 Information technology – Message Handling Systems (MHS)
  • ISO/IEC 10022:1996 Information technology – Open Systems Interconnection – Physical Service Definition
  • Information technology – Open Systems Interconnection – Distributed Transaction Processing
    • ISO/IEC 10026-1:1998 Part 1: OSI TP Model
    • ISO/IEC 10026-2:1998 Part 2: OSI TP Service
    • ISO/IEC 10026-3:1998 Part 3: Protocol specification
    • ISO/IEC 10026-4:1995 Protocol Implementation Conformance Statement (PICS) proforma
    • ISO/IEC 10026-5:1998 Part 5: Application context proforma and guidelines when using OSI TP
    • ISO/IEC 10026-6:1995 Part 6: Unstructured Data Transfer
  • ISO/IEC 10027:1990 Information technology – Information Resource Dictionary System (IRDS) framework
  • ISO/IEC 10028:1993 Information technology – Telecommunications and information exchange between systems – Definition of the relaying functions of a Network layer intermediate system
  • ISO/IEC 10030:1995 Information technology – Telecommunications and information exchange between systems – End System Routing Information Exchange Protocol for use in conjunction with ISO/IEC 8878
  • ISO/IEC TR 10032:2003 Information technology – Reference Model of Data Management
  • ISO/IEC TR 10034:1990 Guidelines for the preparation of conformity clauses in programming language standards
  • ISO/IEC 10035 Information technology – Open Systems Interconnection – Connectionless protocol for the Association Control Service Element
    • ISO/IEC 10035-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 10036:1996 Information technology - Font information interchange - Procedures for registration of font-related identifiers
  • ISO/IEC 10040:1998 Information technology – Open Systems Interconnection – Systems management overview
  • ISO 10052:2004 Acoustics – Field measurements of airborne and impact sound insulation and of service equipment sound – Survey method
  • ISO 10055:1996 Mechanical vibration - Vibration testing requirements for shipboard equipment and machinery components
  • ISO 10075 Ergonomic principles related to mental workload
    • ISO 10075-1:2017 Part 1: General issues and concepts, terms and definitions
  • Thermal performance of windows, doors and shutters – Calculation of thermal transmittance
  • ISO 10079 Medical suction equipment
    • ISO 10079-1:2015 Part 1: Electrically powered suction equipment
    • ISO 10079-2:2014 Part 2: Manually powered suction equipment
    • ISO 10079-3:2014 Part 3: Suction equipment powered from a vacuum or positive pressure gas source
  • :1991 Information technology – 130 mm rewritable optical disk cartridge for information interchange
  • ISO/IEC 10090:1992 Information technology – 90 mm optical disk cartridges, rewritable and read only, for data interchange
  • ISO/IEC TR 10091:1995 Information technology – Technical aspects of 130 mm optical disk cartridge write-once recording format
  • ISO 10110 Optics and photonics – Preparation of drawings for optical elements and systems[Note 3]
    • ISO 10110-1:2006 Part 1: General
    • ISO 10110-2:1996 Part 2: Material imperfections – Stress birefringence
    • ISO 10110-3:1996 Part 3: Material imperfections – Bubbles and inclusions
    • ISO 10110-4:1997 Part 4: Material imperfections – Inhomogeneity and striae
    • ISO 10110-5:2015 Part 5: Surface form tolerances
    • ISO 10110-6:2015 Part 6: Centring tolerances
    • ISO 10110-7:2017 Part 7: Surface imperfections
    • ISO 10110-8:2010 Part 8: Surface texture; roughness and waviness
    • ISO 10110-9:2016 Part 9: Surface treatment and coating
    • ISO 10110-10:2004 Part 10: Table representing data of optical elements and cemented assemblies
    • ISO 10110-11:2016 Part 11: Non-toleranced data
    • ISO 10110-12:2007 Part 12: Aspheric surfaces
    • ISO 10110-14:2007 Part 14: Wavefront deformation tolerance
    • ISO 10110-17:2004 Part 17: Laser irradiation damage threshold
    • ISO 10110-19:2015 Part 19: General description of surfaces and components
  • ISO 10112:1991 Damping materials – Graphical presentation of the complex modulus
  • ISO/IEC 10116 Information technology – Security techniques – Modes of operation for an n-bit block cipher
  • Information technology – Security techniques – Hash-functions
    • ISO/IEC 10118-1:2016 Part 1: General
    • ISO/IEC 10118-2:2010 Part 2: Hash-functions using an n-bit block cipher
    • ISO/IEC 10118-3:2004 Part 3: Dedicated hash-functions
    • ISO/IEC 10118-4:1998 Part 4: Hash-functions using modular arithmetic
  • ISO 10132:1993 Textiles – Textured filament yarn – Definitions
  • ISO 10135:2007 Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD)
  • ISO/IEC 10149:1995 Information technology - Data interchange on read-only 120 mm optical data disks (CD-ROM)
  • ISO 10159:2011 Health informatics – Messages and communication – Web access reference manifest
  • ISO 10160:2015 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Service Definition
  • ISO 10161 Information and documentation – Open Systems Interconnection – Interlibrary Loan Application Protocol Specification
    • ISO 10161-1:2014 Part 1: Protocol specification
    • ISO 10161-2:2014 Part 2: Protocol implementation conformance statement (PICS) proforma
  • Information technology – Open Systems Interconnection – Systems Management
    • ISO/IEC 10164-1:1993 Object Management Function
    • ISO/IEC 10164-2:1993 State Management Function
    • ISO/IEC 10164-3:1993 Attributes for representing relationships
    • ISO/IEC 10164-4:1992 Alarm reporting function
    • ISO/IEC 10164-5:1993 Event Report Management Function
    • ISO/IEC 10164-6:1993 Log control function
    • ISO/IEC 10164-7:1992 Security alarm reporting function
    • ISO/IEC 10164-8:1993 Security audit trail function
    • ISO/IEC 10164-9:1995 Objects and attributes for access control
    • ISO/IEC 10164-10:1995 Usage metering function for accounting purposes
    • ISO/IEC 10164-11:1994 Metric objects and attributes
    • ISO/IEC 10164-12:1994 Test Management Function
    • ISO/IEC 10164-13:1995 Summarization Function
    • ISO/IEC 10164-14:1996 Confidence and diagnostic test categories
    • ISO/IEC 10164-15:2002 Scheduling function
    • ISO/IEC 10164-16:1997 Management knowledge management function
    • ISO/IEC 10164-17:1996 Change over function
    • ISO/IEC 10164-18:1997 Software management function
    • ISO/IEC 10164-19:1998 Management domain and management policy management function
    • ISO/IEC 10164-20:1999 Time management function
    • ISO/IEC 10164-21:1998 Command sequencer for Systems Managenment
    • ISO/IEC 10164-22:2000 Response time monitoring
  • ISO/IEC 10165 Information technology – Open Systems Interconnection – Structure of management information[Note 3]
    • ISO/IEC 10165-1:1993 Management Information Model
    • ISO/IEC 10165-2:1992 Definition of management information
    • ISO/IEC 10165-4:1992 Part 4: Guidelines for the definition of managed objects
    • ISO/IEC 10165-5:1994 Generic management information
    • ISO/IEC 10165-6:1997 Requirements and guidelines for implementation conformance statement proformas associated with OSI management
    • ISO/IEC 10165-7:1996 General relationship model
    • ISO/IEC 10165-8:2000 Managed objects for supporting upper layers
    • ISO/IEC 10165-9:2000 Systems management application layer managed objects
  • ISO/IEC 10166 Information technology – Text and office systems – Document Filing and Retrieval (DFR)
    • ISO/IEC 10166-1:1991 Part 1: Abstract service definition and procedures
    • ISO/IEC 10166-2:1991 Part 2: Protocol specification
  • ISO/IEC TR 10171:2000 Information technology – Telecommunications and information exchange between systems – List of standard data link layer protocols that utilize high-level data link control (HDLC) classes of procedures, list of standard XID format identifiers, list of standard mode-setting information field format identifiers, and list of standard user-defined parameter set identification values
  • ISO/IEC 10173:1998 Information technology – Telecommunications and information exchange between systems – Interface connector and contact assignments for ISDN primary rate access connector located at reference points S and T
  • ISO/IEC 10175 Information technology – Text and office systems – Document Printing Application (DPA)
    • ISO/IEC 10175-1:1996 Part 1: Abstract service definition and procedures
    • ISO/IEC 10175-2:1996 Part 2: Protocol specification
    • ISO/IEC 10175-3:2000 Part 3: Management abstract service definitions and procedures
  • ISO/IEC TR 10176:2003 Information technology - Guidelines for the preparation of programming language standards
  • ISO/IEC 10177:1993 Information technology – Telecommunications and information exchange between systems – Provision of the connection-mode Network internal layer service by intermediate systems using ISO/IEC 8208, the X.25 Packet Layer Protocol
  • ISO/IEC 10179:1996 Information technology – Processing languages – Document Style Semantics and Specification Language (DSSSL)
  • ISO/IEC 10180:1995 Information technology - Processing languages - Standard Page Description Language (SPDL)
  • ISO/IEC 10181 Information technology - Open Systems Interconnection - Security frameworks for open systems
    • ISO/IEC 10181-1:1996 Overview
    • ISO/IEC 10181-2:1996 Authentication framework
    • ISO/IEC 10181-3:1996 Access control framework
    • ISO/IEC 10181-4:1997 Non-repudiation framework
    • ISO/IEC 10181-5:1996 Confidentiality framework
    • ISO/IEC 10181-6:1996 Integrity framework
    • ISO/IEC 10181-7:1996 Security audit and alarms framework
  • ISO/IEC TR 10182:2016 Information technology - Programming languages, their environments and system software interfaces - Guidelines for language bindings
  • ISO/IEC TR 10183 Information technology – Text and office systems – Office Document Architecture (ODA) and interchange format – Technical Report on ISO 8613 implementation testing
    • ISO/IEC TR 10183-1:1993 Part 1: Testing methodology
    • ISO/IEC TR 10183-2:1993 Part 2: Framework for abstract test cases
  • ISO/IEC 10192 Information technology - Home Electronic System (HES) interfaces
    • ISO/IEC 10192-1:2002 Part 1: Universal Interface (UI) Class 1
    • ISO/IEC TR 10192-2:2000 Part 2: Simple Interfaces Type 1
  • ISO/IEC 10206:1991 Information technology – Programming languages – Extended Pascal
  • ISO 10209:2012 Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation
  • Thermal bridges in building construction – Heat flows and surface temperatures – Detailed calculations
  • ISO 10218 Robots and robotic devices – Safety requirements for industrial robots
  • ISO 10241 Terminological entries in standards
    • ISO 10241-1:2011 Part 1: General requirements and examples of presentation
    • ISO 10241-2:2012 Part 2: Adoption of standardized terminological entries
  • ISO 10243:2010 Tools for pressing – Compression springs with rectangular section – Housing dimensions and colour coding
  • ISO 10244:2010 Document management - Business process baselining and analysis
  • ISO 10254:2016 Air cargo and ground equipment – Vocabulary
  • ISO/TR 10255:2009 Document management applications - Optical disk storage technology, management and standards
  • ISO 10263 Earth-moving machinery – Operator enclosure environment
    • ISO 10263-1:2009 Part 1: Terms and definitions
  • ISO 10265:2008 Earth-moving machinery - Crawler machines - Performance requirements and test procedures for braking systems
  • ISO 10272 Microbiology of the food chain – Horizontal method for detection and enumeration of Campylobacter spp.
    • ISO 10272-1:2017 Part 1: Detection method
    • ISO 10272-2:2017 Part 2: Colony-count technique
  • ISO 10273:2017 Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica
  • :1991 Information technology – Programming languages – Full BASIC
  • ISO 10284:1997 Cinematography - Graphical symbols - Description
  • ISO 10286:2015 Gas cylinders - Terminology
  • ISO 10302 Acoustics – Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices
    • ISO 10302-1:2011 Part 1: Airborne noise measurement
    • ISO 10302-2:2011 Part 2: Structure-borne vibration measurements
  • ISO 10303 Industrial automation systems and integration – Product data representation and exchange
  • ISO 10316:1990 Shipbuilding — Class B magnetic compasses — Tests and certification [Withdrawn: replaced by ISO 25862]
  • ISO 10318 Geosynthetics
    • ISO 10318-1:2015 Part 1: Terms and definitions
    • ISO 10318-2:2015 Part 2: Symbols and pictograms
  • ISO 10322 Ophthalmic optics – Semi-finished spectacle lens blanks
    • ISO 10322-1:2016 Part 1: Specifications for single-vision and multifocal lens blanks
    • ISO 10322-2:2016 Part 2: Specifications for progressive-power and degressive-power lens blanks
  • ISO 10324:1997 Information and documentation - Holdings statements - Summary level
  • ISO 10328:2016 Prosthetics – Structural testing of lower-limb prostheses – Requirements and test methods
  • ISO 10334:1994 Implants for surgery – Malleable wires for use as sutures and other surgical applications
  • ISO 10341:2012 Ophthalmic instruments – Refractor heads
  • ISO 10342:2010 Ophthalmic instruments – Eye refractometers
  • ISO 10343:2014 Ophthalmic instruments – Ophthalmometers
  • ISO 10360 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring systems (CMS)[Note 3]
    • ISO 10360-1:2000 Part 1: Vocabulary
    • ISO 10360-2:2009 Part 2: CMMs used for measuring linear dimensions
    • ISO 10360-3:2000 Part 3: CMMs with the axis of a rotary table as the fourth axis
    • ISO 10360-4:2000 Part 4: CMMs used in scanning measuring mode
    • ISO 10360-5:2010 Part 5: CMMs using single and multiple stylus contacting probing systems
    • ISO 10360-6:2001 Part 6: Estimation of errors in computing Gaussian associated features
    • ISO 10360-7:2011 Part 7: CMMs equipped with imaging probing systems
    • ISO 10360-8:2013 Part 8: CMMs with optical distance sensors
    • ISO 10360-9:2013 Part 9: CMMs with multiple probing systems
    • ISO 10360-10:2016 Part 10: Laser trackers for measuring point-to-point distances
    • ISO 10360-12:2016 Part 12: Articulated arm coordinate measurement machines (CMM)
  • ISO/IEC 10367:1991 Information technology - Standardized coded graphic character sets for use in 8-bit codes
  • ISO/IEC 10373 Identification cards – Test methods
    • ISO/IEC 10373-1:2006 Part 1: General characteristics
    • ISO/IEC 10373-2:2015 Part 2: Cards with magnetic stripes
    • ISO/IEC 10373-3:2010 Part 3: Integrated circuit cards with contacts and related interface devices
    • ISO/IEC 10373-5:2014 Part 5: Optical memory cards
    • ISO/IEC 10373-6:2016 Part 6: Proximity cards
    • ISO/IEC 10373-7:2008 Part 7: Vicinity cards
    • ISO/IEC 10373-8:2011 Part 8: USB-ICC
    • ISO/IEC 10373-9:2011 Part 9: Optical memory cards - Holographic recording method
  • ISO 10377:2013 Consumer product safety – Guidelines for suppliers
  • Pipework — Corrugated metal hoses and hose assemblies
  • ISO 10383:2012 Securities and related financial instruments – Codes for exchanges and market identification (MIC)
  • ISO 10386:1994 Ferroboron - Specification and conditions of delivery
  • ISO 10387:1994 Metal chrome - Specification and conditions of delivery
  • ISO 10393:2013 Consumer product recall – Guidelines for suppliers
  • Building materials and products – Hygrothermal properties – Tabulated design values and procedures for determining declared and design thermal values
  • ISO 10487 Passenger cars – Connections for car radios[Note 3]
  • ISO 10494:1993 Gas turbines and gas turbine sets – Measurement of emitted airborne noise – Engineering/survey method
  • ISO/IEC 10514 Information technology - Programming languages
    • ISO/IEC 10514-1:1996 Part 1: Modula-2, Base Language
    • ISO/IEC 10514-2:1998 Part 2: Generics Modula-2
    • ISO/IEC 10514-3:1998 Part 3: Object Oriented Modula-2
  • ISO 10524 Pressure regulators for use with medical gases
    • ISO 10524-1:2006 Part 1: Pressure regulators and pressure regulators with flow-metering devices
    • ISO 10524-2:2005 Part 2: Manifold and line pressure regulators
    • ISO 10524-3:2005 Part 3: Pressure regulators integrated with cylinder valves
    • ISO 10524-4:2008 Part 4: Low-pressure regulators
  • ISO 10534 Acoustics – Determination of sound absorption coefficient and impedance in impedance tubes
    • ISO 10534-1:1996 Part 1: Method using standing wave ratio
    • ISO 10534-2:1998 Part 2: Transfer-function method
  • ISO/IEC 10536 Identification cards – Contactless integrated circuit(s) cards – Close-coupled cards[Note 3]
    • ISO/IEC 10536-1:2000 Part 1: Physical characteristics
    • ISO/IEC 10536-2:1995 Part 2: Dimensions and location of coupling areas
    • ISO/IEC 10536-3:1996 Part 3: Electronic signals and reset procedures
  • ISO/IEC 10538:1991 Information technology - Control functions for text communication
  • Intravascular catheters – Sterile and single-use catheters
    • ISO 10555-1:2013 Part 1: General requirements
    • ISO 10555-3:2013 Part 3: Central venous catheters
    • ISO 10555-4:2013 Part 4: Balloon dilatation catheters
    • ISO 10555-5:2013 Part 5: Over-needle peripheral catheters
    • ISO 10555-6:2015 Part 6: Subcutaneous implanted ports
  • ISO/IEC 10561:1999 Information technology - Office equipment - Printing devices - Method for measuring throughput - Class 1 and Class 2 printers
  • ISO 10567:2007 Earth-moving machinery - Hydraulic excavators - Lift capacity
  • ISO 10576 Statistical methods - Guidelines for the evaluation of conformity with specified requirements
    • ISO 10576-1:2003 Part 1: General principles
  • :2010 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Non-rigid parts
  • ISO 10585:1996 Information and documentation - Armenian alphabet coded character set for bibliographic information interchange
  • ISO 10586:1996 Information and documentation - Georgian alphabet coded character set for bibliographic information interchange
  • ISO/IEC 10588:1993 Information technology – Use of X.25 Packet Layer Protocol in conjunction with X.21/X.21 bis to provide the OSI connection-mode Network Service
  • ISO/IEC 10589:2002 Information technology – Telecommunications and information exchange between systems – Intermediate System to Intermediate System intra-domain routeing information exchange protocol for use in conjunction with the protocol for providing the connectionless-mode network service (ISO 8473)
  • ISO 10625:2005 Equipment for crop protection – Sprayer nozzles – Colour coding for identification
  • ISO 10628 Flow diagrams for process plants
  • ISO/IEC 10641:1993 Information technology - Computer graphics and image processing - Conformance testing of implementations of graphics standards
  • ISO/IEC 10646:2020 Information technology — Universal Coded Character Set (UCS)
  • ISO 10651 Lung ventilators for medical use – Particular requirements for basic safety and essential performance[Note 3]
    • ISO 10651-1:1993 Part 1: Requirements
    • ISO 10651-2:1996 Part 2: Particular requirements for home care ventilators
    • ISO 10651-3:1997 Part 3: Particular requirements for emergency and transport ventilators
    • ISO 10651-4:2002 Part 4: Particular requirements for operator-powered resuscitators
    • ISO 10651-5:2006 Part 5: Gas-powered emergency resuscitators
    • ISO 10651-6:2004 Part 6: Home-care ventilatory support devices
  • ISO 10656:2016 Resistance welding equipment – Transformers – Integrated transformers for welding guns
  • ISO 10664 Hexalobular internal driving feature for bolts and screws – Torx screw head
  • ISO 10667 Assessment service delivery – Procedures and methods to assess people in work and organizational settings
    • ISO 10667-1:2011 Part 1: Requirements for the client
    • ISO 10667-2:2011 Part 2: Requirements for service providers
  • ISO 10668:2010 Brand valuation - Requirements for monetary brand valuation
  • ISO 10685 Ophthalmic optics – Spectacle frames and sunglasses electronic catalogue and identification
    • ISO 10685-1:2011 Part 1: Product identification and electronic catalogue product hierarchy
    • ISO 10685-2:2016 Part 2: Commercial information
    • ISO 10685-3:2012 Part 3: Technical information
  • ISO 10703:2007 Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry
  • ISO 10705 Water quality – Detection and enumeration of bacteriophages
    • ISO 10705-1:1995 Part 1: Enumeration of F-specific RNA bacteriophages
    • ISO 10705-2:2000 Part 2: Enumeration of somatic coliphages
    • ISO 10705-3:2003 Part 3: Validation of methods for concentration of bacteriophages from water
    • ISO 10705-4:2001 Part 4: Enumeration of bacteriophages infecting Bacteroides fragilis
  • ISO 10711:2012 Intelligent Transport Systems – Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors
  • ISO 10718:2015 Cork stoppers – Characterization of a low-in-germs stopper, through the enumeration of colony-forming units of yeasts, moulds and bacteria, capable of both being extracted and growing in alcoholic medium
  • ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
  • ISO/IEC 10728:1993 Information technology – Information Resource Dictionary System (IRDS) Services Interface
  • ISO/IEC 10731:1994 Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services
  • ISO/IEC 10732:1993 Information technology – Use of X.25 Packet Layer Protocol to provide the OSI connection-mode Network Service over the telephone network
  • ISO/IEC 10733:1998 Information technology – Elements of management information related to the OSI Network Layer
  • ISO/IEC 10736:1995 Information technology – Telecommunications and information exchange between systems – Transport layer security protocol
  • ISO/IEC 10737:1998 Information technology – Elements of management information related to OSI Transport layer
  • ISO/IEC 10741 Information technology – User system interfaces – Dialogue interaction
    • ISO/IEC 10741-1:1995 Part 1: Cursor control for text editing
  • ISO/IEC 10742:1994 Information technology – Telecommunications and information exchange between systems – Elements of management information related to OSI Data Link Layer standards
  • ISO/IEC 10744:1997 Information technology - Hypermedia/Time-based Structuring Language (HyTime)
  • ISO/IEC 10745:1995 Information technology - Open Systems Interconnection - Upper layers security model
  • ISO/IEC 10746 Information technology—Open Distributed Processing—Reference model
    • ISO/IEC 10746-1:1998 Overview
    • ISO/IEC 10746-2:2009 Foundations
    • ISO/IEC 10746-3:2009 Architecture
    • ISO/IEC 10746-4:1998 Architectural semantics
  • ISO/IEC 10747:1994 Information technology – Telecommunications and information exchange between systems – Protocol for exchange of inter-domain routeing information among intermediate systems to support forwarding of ISO 8473 PDUs
  • ISO 10754:1996 Information and documentation - Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
  • ISO/IEC 10779:2008 Information technology – Office equipment accessibility guidelines for elderly persons and persons with disabilities
  • ISO/HL7 10781:2015 Health Informatics – HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)
  • ISO 10782 Definitions and attributes of data elements for control and monitoring of textile processes
    • ISO 10782-1:1998 Part 1: Spinning, spinning preparatory and related processes
  • ISO 10790:2015 Measurement of fluid flow in closed conduits – Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)
  • ISO 10795:2011 Space systems – Programme management and quality – Vocabulary
  • ISO/TS 10797:2012 Nanotechnologies – Characterization of single-wall carbon nanotubes using transmission electron microscopy
  • ISO/TS 10798:2011 Nanotechnologies – Characterization of single-wall carbon nanotubes using scanning electron microscopy and energy dispersive X-ray spectrometry analysis
  • ISO 10801:2010 Nanotechnologies – Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method
  • ISO 10807:1994 Pipework - Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmospheres
  • ISO 10808:2010 Nanotechnologies – Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing
  • ISO/TS 10811 Mechanical vibration and shock – Vibration and shock in buildings with sensitive equipment
    • ISO/TS 10811-1:2000 Part 1: Measurement and evaluation
    • ISO/TS 10811-2:2000 Part 2: Classification
  • ISO 10813 Vibration generating machines – Guidance for selection
    • ISO 10813-1:2004 Part 1: Equipment for environmental testing
  • ISO 10815:2016 Mechanical vibration – Measurement of vibration generated internally in railway tunnels by the passage of trains
  • ISO 10816 Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts
    • ISO 10816-1:1995 Part 1: General guidelines
    • ISO 10816-2:2009 Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
    • ISO 10816-3:2009 Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
    • ISO 10816-4:2009 Part 4: Gas turbine sets with fluid-film bearings
    • ISO 10816-5:2000 Part 5: Machine sets in hydraulic power generating and pumping plants
    • ISO 10816-6:1995 Part 6: Reciprocating machines with power ratings above 100 kW
    • ISO 10816-7:2009 Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
    • ISO 10816-8:2014 Part 8: Reciprocating compressor systems
    • ISO 10816-21:2015 Part 21: Horizontal axis wind turbines with gearbox
  • ISO 10817 Rotating shaft vibration measuring systems
    • ISO 10817-1:1998 Part 1: Relative and absolute sensing of radial vibration
  • ISO 10825:1995 Gears - Wear and damage to gear teeth - Terminology
  • ISO 10843:1997 Acoustics – Methods for the description and physical measurement of single impulses or series of impulses
  • ISO 10844:2014 Acoustics – Specification of test tracks for measuring noise emitted by road vehicles and their tyres
  • ISO 10846 Acoustics and vibration – Laboratory measurement of vibro-acoustic transfer properties of resilient elements
    • ISO 10846-1:2008 Part 1: Principles and guidelines
    • ISO 10846-2:2008 Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
    • ISO 10846-3:2002 Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
    • ISO 10846-4:2003 Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
    • ISO 10846-5:2008 Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
  • ISO 10847:1997 Acoustics – In-situ determination of insertion loss of outdoor noise barriers of all types
  • ISO/IEC 10859:1997 Information technology - 8-bit backplane interface: STEbus and mechanical core specifications for microcomputers
  • ISO/IEC 10861:1994 Information technology - Microprocessor systems - High-performance synchronous 32-bit bus: MULTIBUS II
  • ISO/TS 10867:2010 Nanotechnologies – Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
  • ISO/TS 10868:2017 Nanotechnologies – Characterization of single-wall carbon nanotubes using ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectroscopy
  • ISO 10878:2013 Non-destructive testing - Infrared thermography - Vocabulary
  • ISO/IEC 10885:1993 Information technology - 356 mm optical disk cartridge for information interchange - Write once
  • ISO/IEC 10918 Information technology - Digital compression and coding of continuous-tone still images
  • ISO/TR 10929:2012 Nanotechnologies – Characterization of multiwall carbon nanotube (MWCNT) samples
  • ISO 10934 Optics and optical instruments - Vocabulary for microscopy
    • ISO 10934-1:2002 Part 1: Light microscopy
    • ISO 10934-2:2007 Part 2: Advanced techniques in light microscopy
  • ISO 10936 Optics and photonics – Operation microscopes
    • ISO 10936-1:2017 Part 1: Requirements and test methods
    • ISO 10936-2:2010 Part 2: Light hazard from operation microscopes used in ocular surgery
  • ISO 10938:2016 Ophthalmic optics – Chart displays for visual acuity measurement – Printed, projected and electronic
  • ISO 10939:2017 Ophthalmic instruments – Slit-lamp microscopes
  • ISO 10940:2009 Ophthalmic instruments – Fundus cameras
  • ISO 10942:2006 Ophthalmic instruments – Direct ophthalmoscopes
  • ISO 10943:2011 Ophthalmic instruments – Indirect ophthalmoscopes
  • ISO 10944:2009 Ophthalmic instruments – Synoptophores
  • ISO 10957:2009 Information and documentation – International standard music number (ISMN)
  • ISO 10962:2015 Securities and related financial instruments – Classification of financial instruments (CFI code)
  • ISO/IEC 10967 Information technology – Language independent arithmetic
  • ISO/TS 10974:2012 Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
  • ISO 10985:2009 Caps made of aluminium-plastics combinations for infusion bottles and injection vials – Requirements and test methods
  • ISO 10991:2009 Micro process engineering – Vocabulary
  • ISO/TR 10992:2011 Intelligent transport systems – Use of nomadic and portable devices to support ITS service and multimedia provision in vehicles
  • ISO 10993 Biological evaluation of medical devices
  • ISO/IEC 10994:1992 Information technology – Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side – ISO Type 303
  • ISO/IEC 10995:2011 Information technology - Digitally recorded media for information interchange and storage - Test method for the estimation of the archival lifetime of optical media

Notes[]

  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. ^ a b c d e f The exact wording of this title varies between parts. This is the wording of the most recently published part.

References[]

  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.

External links[]

Retrieved from ""