Intel MCS-48

Intel 8048 microcontroller

The 8749 with UV EPROM

An Intel 8049 microcontroller, as used in a HP3478A multimeter. This chip was manufactured in the second week of 1984.

Intel 8749 die

The MCS-48 microcontroller series, Intel's first microcontroller, was originally released in 1976. Its first members were 8048, 8035 and 8748. The 8048 is probably the most prominent member of the family. Initially, this family was produced using NMOS (n-type metal–oxide–semiconductor) technology. In the early 1980s, it became available in CMOS technology. It was still manufactured into the 1990s to support older designs that still used it.

The MCS-48 series has a modified Harvard architecture, with internal or external program ROM and 64–256 bytes of internal (on-chip) RAM. The I/O is mapped into its own address space, separate from programs and data.

Though the MCS-48 series was eventually replaced by the very successful MCS-51 series, it remained quite popular even by the year 2000 due to its low cost, wide availability, memory-efficient one-byte instruction set, and mature development tools. Because of this, it is much used in high-volume, cost-sensitive consumer electronics devices such as TV remotes, computer keyboards, and toys.

Variants[]

The 8049 has 2 KB of masked ROM (the 8748 and 8749 had EPROM) that can be replaced with a 4 KB external ROM, as well as 128 bytes of RAM and 27 I/O ports.^[1] The microcontroller's oscillator block divides the incoming clock into 15 internal phases, thus with its 11 MHz max. crystal one gets 0.73 MIPS (of one-clock instructions). Some 70% of instructions are single byte/cycle ones, but 30% need two cycles and/or two bytes, so the raw performance would be closer to 0.5 MIPS.

Uses[]

The Tandy/Radio Shack TRS-80 Model II, released in 1979, used the 8021 in its keyboard.^[2] The 8021 allowed the Model II to be the first desktop computer system with a separate detachable lightweight keyboard connected with by a single thin flexible wire, and likely the first keyboard to use a dedicated microprocessor^{[citation needed]}, both attributes that would be copied years later by Apple and IBM.^{[citation needed]} The 8021 processor scans the key matrix, converts switch closures to an 8-bit code and then transmits that code serially to the keyboard interface on the main system. The 8021 will also accept commands to turn indicator LEDs on or off. This was all done with just four chips, a remarkable feat at the time. The 8021 was also used in the keyboards for the TRS-80 Model 12, 12B, 16, 16B and the Tandy 6000/6000HD.^[3]

The original IBM PC keyboard used an 8048 as its internal microcontroller.^[4] The PC AT replaced the PC's Intel 8255 peripheral interface chip at I/O port addresses 0x60–63 with an 8042 accessible through port addresses 0x60 and 0x64.^[5] As well as managing the keyboard interface, the 8042 controlled the A20 line gating function for the AT's Intel 80286 CPU and could be commanded by software to reset the 80286 (unlike the 80386 and later processors, the 80286 had no way of switching from protected mode back to real mode except by being reset). Later PC compatibles integrate the 8042's functions into their super I/O devices.

The 8048 was used in the Magnavox Odyssey² video game console, the Korg Trident series,^[6] and the Korg Poly-61,^[7] Roland Jupiter-4 and ^[8] analog synthesizers. The Sinclair QL used the closely related Intel 8049 to manage its keyboard, joystick ports, RS-232 inputs and audio. The ROM-less 8035 variant was used in Nintendo's arcade game Donkey Kong to generate the background music.

Derived microcontrollers[]

Philips Semiconductors (now NXP) owned a license to produce this series and developed their MAB8400-family based on this architecture. These were the first microcontrollers with an integrated I²C-interface and were used in the first Philips (Magnavox in the US) Compact Disc players (e.g. the CD-100).^[9]

• Intel MCS-48 second sources
• 

  Kvazar Kiev KM1816VE48 (Soviet Union)

• 

  National Semiconductor NS87PC48D

• 

  NEC μPD8749HD

• 

  Philips MAF 8049H

• 

  Signetics SCN8048A

See also[]

• HSE-49 Emulator

Bibliography[]

MCS-48

• MCS-48 Single Component Microcomputer, Applications Seminar Notebook, 1978, Intel Corporation.
• MCS-48 Microcomputer User's Manual^[1]
• Lionel Smith, Cecil Moore: Serial I/O and Math Utilities for the 8049 Microcomputer, Application Note AP-49, January 1979, Intel Corporation.
• A High-Speed Emulator for Intel MCS-48 Microcomputers, Application Note AP-55A, August 1979, Intel Corporation.
• Phil Dahm, Stuart Rosenberg: Intel MCS-48 and UPI-41A Microcontrollers, Reliability Report RR-25, December 1979, Intel Corporation.
• Microcontroller Handbook, Intel 1984, Order number 210918-002.
• 8-Bit Embedded Controllers, Intel 1991, Order number 270645-003.

UPI-41

• UPI-41A User's Manual, Intel 1980, Order number 9800504-02 Rev. B.
• Microprocessor Peripherals UPI-41A/41AH/42/42AH User’s Manual (PDF). Intel Corporation. October 1993. 231318-006.
• Johan Beaston, Jim Kahn: An 8741A/8041A Digital Cassette Controller, Application Note AP-90, May 1980, Intel Corporation.

References[]

External links[]

• MCS-48 family architecture
• Coprolite 8048 Projects at the Wayback Machine (archived 17 July 2014)
• Computer History Museum, Intel 8048 Microcontroller Oral History Panel
• Microcontroller NEC 8741 (image of the Silicon-Chip)

This article is based on material taken from the Free On-line Dictionary of Computing prior to 1 November 2008 and incorporated under the "relicensing" terms of the GFDL, version 1.3 or later.