Motorola 68HC05
![](http://upload.wikimedia.org/wikipedia/commons/thumb/6/65/Blaupunkt_CR-4500_-_main_board_2_-_Motorola_MC68HC05N4-9204.jpg/220px-Blaupunkt_CR-4500_-_main_board_2_-_Motorola_MC68HC05N4-9204.jpg)
The 68HC05 (HC05 in short) is a broad family of 8-bit microcontrollers from Freescale Semiconductor (formerly Motorola Semiconductor).
Like all Motorola processors that share lineage from the 6800, they use the von Neumann architecture as well as memory-mapped I/O. This family has five CPU registers that are not part of the memory: an 8-bit accumulator A, an 8-bit index register X, an 8-bit stack pointer SP with two most significant bits hardwired to 1, a 13-bit program counter PC, and an 8-bit condition code register CCR.
Among the HC05's there are several processor families, each targeted to different embedded applications.
The 68HC05 family broke ground with the introduction of the EEPROM-based MC68HC805C4 and MC68HC805B6 variants in the late 1980s. Using a serial bootloader, they could be programmed in-circuit with simple software running on a PC and a low current 19 V supply (no programmer required).
The HC05 series is now considered legacy and is replaced by the HC(S)08 MCU series.
Nomenclature[]
MC6805xx | Motorola's first microcontroller family, implemented in HMOS. |
MC68705xx | MC6805 parts with EPROM instead of masked ROM. |
MC146805xx | MC6805 parts implemented in CMOS. |
MC1468705xx | MC146805 parts with EPROM instead of masked ROM. |
MC68HC05xx | MC6805 parts implemented in high-speed CMOS. |
MC68HC805xx | MC68HC05 parts with EEPROM. |
External links[]
- Microcontrollers
- Freescale Semiconductor
- Motorola microprocessors
- Microcomputer stubs