Kinetic inductance detector

From Wikipedia, the free encyclopedia
Image of kinetic inductance detectors.
Chip containing aluminium kinetic inductance detectors with tin absorbers. Image credit: Argonne National Lab.

The kinetic inductance detector (KID) — also known as a microwave kinetic inductance detector (MKID) — is a type of superconducting photon detector first developed by scientists at the California Institute of Technology and the Jet Propulsion Laboratory in 2003.[1] These devices operate at cryogenic temperatures, typically below 1 kelvin. They are being developed for high-sensitivity astronomical detection for frequencies ranging from the far-infrared to X-rays.

Principle of operation[]

Photons incident on a strip of superconducting material break Cooper pairs and create excess quasiparticles. The kinetic inductance of the superconducting strip is inversely proportional to the density of Cooper pairs, and thus the kinetic inductance increases upon photon absorption. This inductance is combined with a capacitor to form a microwave resonator whose resonant frequency changes with the absorption of photons. This resonator-based readout is useful for developing large-format detector arrays, as each KID can be addressed by a single microwave tone and many detectors can be measured using a single broadband microwave channel, a technique known as frequency-division multiplexing.

Applications[]

KIDs are being developed for a range of astronomy applications, including millimeter and submillimeter wavelength detection at the Caltech Submillimeter Observatory,[2] the Atacama Pathfinder Experiment (APEX) on the Llano de Chajnantor Observatory,[3] the CCAT Observatory, and the IRAM 30-m telescope.[4] They are also being developed for optical and near-infrared detection at the Palomar Observatory.[5] Since their ability to be frequency-division multiplexed allows KIDs to achieve small detector package sizes, KIDs have also gained popularity in airborne balloon astrophysics as a more compact and less massive alternative to transition edge sensors.[6]

See also[]

References[]

  1. ^ Day, P. K.; LeDuc, H. G.; Mazin, B. A.; Vayonakis, A.; Zmuidzinas, J. (2003). "A broadband superconducting detector suitable for use in large arrays". Nature. 425 (6960): 817–821. Bibcode:2003Natur.425..817D. doi:10.1038/nature02037. PMID 14574407.
  2. ^ Maloney, Philip R.; Czakon, Nicole G.; Day, Peter K.; Downes, Thomas P.; Duan, Ran; Gao, Jiansong; Glenn, Jason; Golwala, Sunil R.; Hollister, Matt I.; Leduc, Henry G.; Mazin, Benjamin A.; McHugh, Sean G.; Noroozian, Omid; Nguyen, Hien T.; Sayers, Jack; Schlaerth, James A.; Siegel, Seth; Vaillancourt, John E.; Vayonakis, Anastasios; Wilson, Philip; Zmuidzinas, Jonas (2010). "MUSIC for sub/Millimeter astrophysics" (PDF). Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy V. Vol. 7741. pp. 77410F. doi:10.1117/12.857751.
  3. ^ Heyminck, S.; Klein, B.; Güsten, R.; Kasemann, C.; Baryshev, A.; Baselmans, J.; Yates, S.; Klapwijk, T. M. (2010). "Development of a MKID Camera for APEX". Twenty-First International Symposium on Space Terahertz Technology: 262. Bibcode:2010stt..conf..262H.
  4. ^ Monfardini, A.; et al. (2011). "A dual-band millimeter-wave kinetic inductance camera for the IRAM 30 m telescope". The Astrophysical Journal Supplement Series. 194 (2): 24. arXiv:1102.0870. Bibcode:2011ApJS..194...24M. doi:10.1088/0067-0049/194/2/24.
  5. ^ Mazin, B. A.; O'Brien, K.; McHugh, S.; Bumble, B.; Moore, D.; Golwala, S.; Zmuidzinas, J. (2010). "ARCONS: a highly multiplexed superconducting optical to near-IR camera". Proc. SPIE. Ground-based and Airborne Instrumentation for Astronomy III. 7735: 773518. arXiv:1007.0752. Bibcode:2010SPIE.7735E..18M. doi:10.1117/12.856440.
  6. ^ Zmuidzinas, Jonas (March 2012). "Superconducting Microresonators: Physics and Applications". Annual Review of Condensed Matter Physics. 3: 169-214. Retrieved 23 July 2020.

External links[]

Retrieved from ""