List of International Organization for Standardization standards, 1-4999

This is a list of published^{[Note 1]} International Organization for Standardization (ISO) standards and other deliverables.^{[Note 2]} For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.^[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.^[2]

ISO 1 – ISO 199[]

• ISO 1:2016 Geometrical product specifications (GPS) — Standard reference temperature for the specification of geometrical and dimensional properties
• ISO GUIDE 1:1972 Presentation of International Standards and technical reports [Withdrawn without replacement]
• IWA 1:2005 Quality management systems — Guidelines for process improvements in health service organizations [Withdrawn without replacement]
• ISO 2:1973 Textiles — Designation of the direction of twist in yarns and related products
• ISO/IEC GUIDE 2:2004 Standardization and related activities — General vocabulary
• IWA 2:2007 Quality management systems — Guidelines for the application of ISO 9001:2000 in education [Withdrawn without replacement]
• ISO 3:1973 Preferred numbers — Series of preferred numbers
• IWA 3:2005 Image safety — Reducing the incidence of undesirable biomedical effects caused by visual image sequences [Withdrawn without replacement]
• ISO/IEC GUIDE 3:1981 Identification of national standards that are equivalent to International Standards [Withdrawn: replaced with ISO/IEC GUIDE 21:1999, now ISO/IEC GUIDE 21-1:2005 and ISO/IEC GUIDE 21-2:2005]
• ISO 4:1997 Information and documentation — Rules for the abbreviation of title words and titles of publications
• ISO GUIDE 4:1975 Preparation of standard methods of measuring performance of consumer goods (SMMP) [Withdrawn: replaced with ISO/IEC GUIDE 36:1982, now Withdrawn without replacement]
• IWA 4:2009 Quality management systems — Guidelines for the application of ISO 9001:2008 in local government [Withdrawn: replaced with ISO 18091:2014, now ISO 18091:2019]
• ISO 5 Photography and graphic technology — Density measurements
  • ISO 5-1:2009 Part 1: Geometry and functional notation
  • ISO 5-2:2009 Part 2: Geometric conditions for transmittance density
  • ISO 5-3:2009 Part 3: Spectral conditions
  • ISO 5-4:2009 Part 4: Geometric conditions for reflection density
• IWA 5:2006 Emergency preparedness [Withdrawn without replacement]
• ISO GUIDE 5:1976 Designation of internationally standardized items [Withdrawn without replacement]
• ISO 6:1993 Photography — Black-and-white pictorial still camera negative film/process systems — Determination of ISO speed
• IWA 6:2008 Guidelines for the management of drinking water utilities under crisis conditions [Withdrawn without replacement]
• ISO GUIDE 6:1977 Mention of reference materials in International Standards [Withdrawn without replacement]
• ISO 7 Pipe threads where pressure-tight joints are made on the threads
  • ISO 7-1:1994 Part 1: Dimensions, tolerances and designation
    • ISO 7-1:1994/COR 1:2007 Technical Corrigendum 1
  • ISO 7-2:2000 Part 2: Verification by means of limit gauges
• ISO/IEC GUIDE 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment [Withdrawn: replaced with ISO/IEC 17007:2009]
• ISO 8:2019 Information and documentation — Presentation and identification of periodicals. For the 8-bit coded character set, see ISO/IEC 8859
• ISO GUIDE 8:1977 Guidelines for a national standards information centre [Withdrawn without replacement]
• IWA 8:2009 Tableware, giftware, jewellery, luminaries — Glass clarity — Classification and test method [Withdrawn without replacement]
• ISO 9:1995 Information and documentation — Transliteration of Cyrillic characters into Latin characters — Slavic and non-Slavic languages
• ISO GUIDE 9:1976 Courses in standardization [Withdrawn without replacement]
• IWA 9:2011 Framework for managing sustainable development in business districts [Withdrawn without replacement]
• ISO/R 10:1955 Aircraft — Ground air-conditioning connections for pressure cabins [Withdrawn: replaced with ISO 1034]
• ISO GUIDE 10:1977 Registration of standardizing bodies [Withdrawn without replacement]
• ISO 11:1987 Aircraft — Ground pressure testing connections for pressure cabins
• ISO 12:1987 Aerospace — Pipelines — Identification
• ISO 13:1978 Grey iron pipes, special castings and grey iron parts for pressure main lines [Withdrawn without replacement]
• ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering — Dimensions, tolerances and verification
• ISO 15:2017 Rolling bearings — Radial bearings — Boundary dimensions, general plan
• ISO 16:1975 Acoustics — Standard tuning frequency (Standard musical pitch)
• ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers
• ISO 18:1981 Documentation — Contents list of periodicals
• ISO/R 19:1956 Shipbuilding — Inland navigation — Deckbolts [Withdrawn without replacement]
• ISO/R 20:1956 Shipbuilding — Inland navigation — Rivets for Hatches [Withdrawn without replacement]
• ISO 21:1985 Shipbuilding — Inland navigation — Cable-lifters for stud-link anchor chains [Withdrawn without replacement]
• ISO 22:1991 Belt drives — Flat transmission belts and corresponding pulleys — Dimensions and tolerances
• ISO 23:1993 Cinematography — Camera usage of 35 mm motion-picture film — Specifications
• ISO/R 24:1956 Cinematography — Projector usage of 35 mm motion-picture films for direct front projection — Specifications [Withdrawn: replaced with ISO 2939]
• ISO 25:1994 Cinematography — Camera usage of 16 mm motion-picture film — Specifications
• ISO 26:1993 Cinematography — Projector usage of 16 mm motion-picture films for direct front projection — Specifications
• ISO/R 27:1956 Cinematography — Emulsion and sound record positions in camera for 16 mm motion-picture films [Withdrawn without replacement]
• ISO 28:1976 Cinematography — Camera usage of 8 mm Type R motion-picture film — Specifications
• ISO 29:1980 Cinematography — Projector usage of 8 mm Type R silent motion-picture film for direct front projection — Specifications [Withdrawn without replacement]
• ISO/R 30:1956 Bibliographical strip [Withdrawn without replacement]
• ISO 31 Quantities and units [Withdrawn: replaced with ISO/IEC 80000]
• ISO 32:1977 Gas cylinders for medical use — Marking for identification of content
• ISO/R 33:1957 Rubber, vulcanized or thermoplastic — Du Pont constant load method of measuring abrasion resistance of vulcanized natural and synthetic rubbers [Withdrawn without replacement]
• ISO 34 Rubber, vulcanized or thermoplastic — Determination of tear strength measuring abrasion resistance of vulcanized natural and synthetic rubbers
  • ISO 34-1:2015 Part 1: Trouser, angle and crescent test pieces
  • ISO 34-2:2015 Part 2: Small (Delft) test pieces
• ISO 35:2004 Natural rubber latex concentrate — Determination of mechanical stability
• ISO 36:2020 Rubber, vulcanized or thermoplastic — Determination of adhesion to textile fabrics
• ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
• ISO/R 38:1957 Shipbuilding — Bollards [Withdrawn without replacement]
• ISO/R 39:1957 Shipbuilding — Anchor Chains — Lugless Joining Shackles [Withdrawn: replaced with ISO 1704]
• ISO/R 40:1957 Shipbuilding — Anchor Chains — Studless Links [Withdrawn: replaced with ISO 1704]
• ISO 41:1980 Shipbuilding — Inland vessels — Covers for deck openings for pumps [Withdrawn without replacement]
• ISO/R 42:1957 Shipbuilding — Inland vessels — Mushroom-type ventilator heads [Withdrawn: replaced by ISO 3372, now withdrawn without replacement]
• ISO 43:2016 Aircraft — Jacking pads
• ISO 44:1975 Aerospace — Lever-operated, two-position, ON/OFF switches — Directions of operation
• ISO 45:1990 Aircraft — Pressure refuelling connections
• ISO 46:1973 Aircraft — Fuel nozzle grounding plugs and sockets
• ISO/R 47:1957 Aircraft — Toilet connections [Withdrawn: replaced with ISO 17775]
• ISO 48 Rubber, vulcanized or thermoplastic — Determination of hardness
  • ISO 48-1:2018 Part 1: Introduction and guidance
  • ISO 48-2:2018 Part 2: Hardness between 10 IRHD and 100 IRHD
  • ISO 48-3:2018 Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale
  • ISO 48-4:2018 Part 4: Indentation hardness by durometer method (Shore hardness)
  • ISO 48-5:2018 Part 5: Indentation hardness by IRHD pocket meter method
  • ISO 48-6:2018 Part 6: Apparent hardness of rubber-covered rollers by IRHD method
  • ISO 48-7:2018 Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method
  • ISO 48-8:2018 Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method
  • ISO 48-9:2018 Part 9: Calibration and verification of hardness testers
• ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
• ISO 50:1977 Metal pipes — Steel sockets screwed according to ISO 7 [Withdrawn without replacement]
• ISO/R 51:1957 Shipbuilding — Inland navigation — Pipe lines for the transport of combustible liquids — nominal diameters [Withdrawn without replacement]
• ISO/R 52:1957 Belt drives — Grooved pulleys — Sections A, B, C, D, and E [Withdrawn: replaced by ISO 4183]
• ISO 53:1998 Cylindrical gears for general and heavy engineering — Standard basic rack tooth profile
• ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering — Modules
• ISO 55:1977 Seedlac — Specification [Withdrawn without replacement]
• ISO 56:1979 Shellac — Specification [Withdrawn without replacement]
  • ISO 56-1:1979 Hand-made Shellac — Specification [Withdrawn without replacement]
  • ISO 56-2:1979 Machine-made Shellac — Specification [Withdrawn without replacement]
• ISO 57:1975 Bleached lac — Specification [Withdrawn without replacement]
• ISO/R 58:1958 Substances of paper [Withdrawn without replacement]
• ISO 59:1976 Plastics — Determination of acetone-soluble matter [Withdrawn without replacement]
• ISO 60:1977 Plastics — Determination of apparent density of material that can be poured from a specified funnel
• ISO 61:1976 Plastics — Determination of apparent density of moulding material that cannot be poured from a specified funnel
• ISO 62:2008 Plastics — Determination of water absorption
• ISO 63:1975 Flat transmission belts — Lengths [Withdrawn: Replaced with ISO 22]
• ISO 64:1974 Steel tubes — Outside Diameters [Withdrawn: Replaced with ISO 4200]
• ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1
• ISO/R 66:1958 Paper vocabulary — First series of terms [Withdrawn: Replaced with ISO 4046]
• ISO 67:1981 Muscovite mica blocks, thins and films — Grading by size [Withdrawn without replacement]
• ISO 68 ISO general-purpose screw threads – Basic profile
  • ISO 68-1:1998 Part 1: Metric screw threads
  • ISO 68-2:1998 Part 2: Inch screw threads
• ISO 69:1998 Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions
• ISO 70:1981 Cinematography — 35 mm negative photographic sound record on 35 mm motion-picture film — Position and maximum width dimensions
• ISO 71:2014 Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions
• ISO/R 72:1958 Cinematography — Sound records and scanning area of 35 mm double width push-pull sound prints — Normal and offset centerline types [Withdrawn without replacement]
• ISO/R 73:1958 Cinematography — Image area produced by camera aperture and maximum projectable image area on 35 mm motion-picture film — Positions and dimensions [Withdrawn: replaced by ISO 2906 and ISO 2907]
• ISO 74:1976 Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film — Positions and dimensions
• ISO 75 Plastics — Determination of temperature of deflection under load
  • ISO 75-1:2020 Part 1: General test method
  • ISO 75-2:2013 Part 2: Plastics and ebonite
  • ISO 75-3:2004 Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
• ISO 76:2006 Rolling bearings — Static load ratings
• ISO/R 77:1958 Bibliographical references — Essential elements [Withdrawn without replacement]
• ISO 78 Chemistry — Layouts for standards^{[Note 3]}
  • ISO 78-2:1999 Part 2: Methods of chemical analysis
  • ISO 78-3:1983 Part 3: Standard for molecular absorption spectrometry [Withdrawn without replacement]
  • ISO 78-4:1983 Part 4: Standard for atomic absorption spectrometric analysis [Withdrawn without replacement]
• ISO/R 79:1968 Steel — Brinell hardness test [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
• ISO/TR 79:2015 Reference materials – Examples of reference materials for qualitative properties
• ISO/R 80:1968 Steel — Rockwell hardness test (B and C scales) [Withdrawn: replaced with ISO 6508]
• ISO/R 81:1967 Steel — Vickers hardness test (Load 5 to 100 kgf) [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
• ISO 82:1974 Steel — Tensile testing [Withdrawn: replaced with ISO 6892-1]
• ISO 83:1976 Steel — Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1]
• ISO/R 84:1959 Steel — Izod impact test [Withdrawn without replacement]
• ISO/R 85:1959 Steel — Bend test [Withdrawn: replaced with ISO 7438]
• ISO 86:1974 Steel — Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-1]
• ISO/R 87:1959 Steel — Simple bend testing of sheet and strip less than 3 mm thick [Withdrawn: replaced with ISO 7438]
• ISO/R 88:1959 Steel — Reverse bend testing of sheet and strip less than 3 mm thick [Withdrawn: replaced with ISO 7799]
• ISO 89:1974 Steel — Tensile testing of wire [Withdrawn: replaced with ISO 6892-1]
• ISO 90 Light gauge metal containers — Definitions and determination of dimensions and capacities
  • ISO 90-1:1997 Part 1: Open-top cans
  • ISO 90-2:1997 Part 2: General use containers
  • ISO 90-3:2000 Part 3: Aerosol cans
• ISO 91:2017 Petroleum and related products — Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions
• ISO 92:1976 Textile machinery and accessories — Spinning machinery — Definition of side (left or right)
• ISO 93 Textile machinery and accessories — Cylindrical sliver cans
  • ISO 93-1:2006 Part 1: Main dimensions
  • ISO 93-2:2006 Part 2: Spring bottoms
  • ISO 93-3:1981 Part 3: Packaging sliver cans (press cans) [Withdrawn without replacement]
• ISO 94:1982 Textile machinery and accessories — Spindle gauges for ring-spinning and ring-doubling frames
• ISO/R 95:1972 Textile machinery and accessories — Rings for ring-spinning and ring-doubling frames for "C" travellers [Withdrawn without replacement]
• ISO 96 Textile machinery and accessories — Rings and travellers for ring spinning and ring twisting frames
  • ISO 96-1:2016 Part 1: Flange rings T and SF and their travellers
  • ISO 96-2:2009 Part 2: HZ- and J-rings and their travellers
• ISO 97:1975 Textile machinery and accessories — Rings for spinning, doubling and twisting for ear-shaped travellers [Withdrawn: replaced with ISO 96-2]
• ISO 98:2001 Textile machinery and accessories — Spinning preparatory and spinning machinery — Main dimensions of coverings for top rollers
• ISO 99:1975 Pulleys for flat transmission belts — Diameters [Withdrawn: replaced with ISO 22]
• ISO 100:1984 Pulleys for flat transmission belts — Crowns [Withdrawn: replaced with ISO 22]
• ISO/R 101:1959 Width of sheets of paper [Withdrawn without replacement]
• ISO 102:1990 Aircraft — Gravity filling orifices
• ISO/R 103:1959 Aircraft — Instrument Cases — Sizes and mounting dimensions [Withdrawn without replacement]
• ISO 104:2015 Rolling bearings — Thrust bearings — Boundary dimensions, general plan
• ISO 105 Textiles — Tests for colour fastness
  • ISO 105-A01:2010 Part A01: General principles of testing
  • ISO 105-A02:1993 Part A02: Grey scale for assessing change in colour
  • ISO 105-A03:2019 Part A03: Grey scale for assessing staining
  • ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
  • ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale rating
  • ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colour
  • ISO 105-A08:2001 Part A08: Vocabulary used in colour measurement
  • ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniques
  • ISO 105-B01:2014 Part B01: Colour fastness to light: Daylight
  • ISO 105-B02:2014 Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
  • ISO 105-B03:2017 Part B03: Colour fastness to weathering: Outdoor exposure
  • ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test
  • ISO 105-B05:1993 Part B05: Detection and assessment of photochromism
  • ISO 105-B06:2020 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test
  • ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspiration
  • ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7
  • ISO 105-B10:2011 Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation
  • ISO 105-C01:1989 Part C01: Colour fastness to washing: Test 1 [Withdrawn: replaced with ISO 105-C10]
  • ISO 105-C02:1989 Part C02: Colour fastness to washing: Test 2 [Withdrawn: replaced with ISO 105-C10]
  • ISO 105-C03:1989 Part C03: Colour fastness to washing: Test 3 [Withdrawn: replaced with ISO 105-C10]
  • ISO 105-C04:1989 Part C04: Colour fastness to washing: Test 4 [Withdrawn: replaced with ISO 105-C10]
  • ISO 105-C05:1989 Part C05: Colour fastness to washing: Test 5 [Withdrawn: replaced with ISO 105-C10]
  • ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial laundering
  • ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textiles
  • ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
  • ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering — Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator
  • ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and soda
  • ISO 105-C12:2004 Part C12: Colour fastness to industrial laundering
  • ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvent
  • ISO 105-D02:2016 Part D02: Colour fastness to rubbing: Organic solvents
  • ISO 105-E01:2013 Part E01: Colour fastness to water
  • ISO 105-E02:2013 Part E02: Colour fastness to sea water
  • ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)
  • ISO 105-E04:2013 Part E04: Colour fastness to perspiration
  • ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acid
  • ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkali
  • ISO 105-E07:2010 Part E07: Colour fastness to spotting: Water
  • ISO 105-E08:1994 Part E08: Colour fastness to hot water
  • ISO 105-E09:2010 Part E09: Colour fastness to potting
  • ISO 105-E10:1994 Part E10: Colour fastness to decatizing
  • ISO 105-E11:1994 Part E11: Colour fastness to steaming
  • ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline milling
  • ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severe
  • ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mild
  • ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabrics
  • ISO 105-F01:2001 Part F01: Specification for wool adjacent fabric
  • ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabrics
  • ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabric
  • ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabric
  • ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabric
  • ISO 105-F06:2000 Part F06: Specification for silk adjacent fabric
  • ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabric
  • ISO 105-F09:2009 Part F09: Specification for cotton rubbing cloth
  • ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibre
  • ISO 105-G01:2016 Part G01: Colour fastness to nitrogen oxides
  • ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumes
  • ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphere
  • ISO 105-G04:2016 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humidities
  • ISO 105-J01:1997 Part J01: General principles for measurement of surface colour
  • ISO 105-J02:1997 Part J02: Instrumental assessment of relative whiteness
  • ISO 105-J03:2009 Part J03: Calculation of colour differences
  • ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02)
  • ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite
  • ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxide
  • ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)
  • ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)
  • ISO 105-N05:1993 Part N05: Colour fastness to stoving
  • ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)
  • ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleating
  • ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot air
  • ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochloride
  • ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steam
  • ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chloride
  • ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acid
  • ISO 105-X03:1987 Part X03: Colour fastness to chlorination [Withdrawn without replacement]
  • ISO 105-X04:1994 Part X04: Colour fastness to mercerizing
  • ISO 105-X05:1994 Part X05: Colour fastness to organic solvents
  • ISO 105-X06:1994 Part X06: Colour fastness to soda boiling
  • ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Wool
  • ISO 105-X08:1994 Part X08: Colour fastness to degumming
  • ISO 105-X09:1993 Part X09: Colour fastness to formaldehyde
  • ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatings
  • ISO 105-X11:1994 Part X11: Colour fastness to hot pressing
  • ISO 105-X12:2016 Part X12: Colour fastness to rubbing
  • ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting
  • ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
  • ISO 105-X16:2016 Part X16: Colour fastness to rubbing — Small areas
  • ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materials
  • ISO 105-X19:2020 Part X19: Colour fastness to rubbing (Gakushin test method)
  • ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium salts
  • ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and copper
  • ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibres
  • ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyes
  • ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyes
  • ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migration
  • ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyes
  • ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolytes
  • ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyes
  • ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solution
  • ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions
• ISO/R 106:1959 Shipbuilding — Light metal rivets — Diameters and clearances [Withdrawn without replacement]
• ISO/R 107:1959 Shipbuilding — Light metal rivets — Ship heads [Withdrawn without replacement]
• ISO 108:1976 Textile machinery and accessories — Weaving looms — Definition of left and right sides
• ISO 109:1982 Textile machinery — Working widths of weaving machines
• ISO 110:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 9 degrees 15' [Withdrawn without replacement]
• ISO 111:1978 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 4 degrees 20' [Withdrawn: Replaced with ISO 8489-3]
• ISO 112:1983 Textile machinery and accessories — Cones for yarn winding (cross wound) — Half angle of the cone 3 degrees 30' [Withdrawn: Replaced with ISO 8489-2]
• ISO 113:2010 Rolling bearings — Plummer block housings — Boundary dimensions
• ISO 114:1980 Unalloyed magnesium ingots — Chemical composition [Withdrawn: replaced with ISO 8287]
• ISO 115:2003 Unalloyed aluminium ingots for remelting — Classification and composition
• ISO/R 116:1959 Pesticides — Common names — First series of terms [Withdrawn: replaced with ISO 1750]
• ISO/R 117:1959 Plastics — Polystyrene — Determination of boiling water absorption [Withdrawn: replaced with ISO 62]
• ISO 118:1976 Plastics — Polystyrene — Determination of methanol-soluble matter [Withdrawn without replacement]
• ISO 119:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free phenols — Iodometric method
• ISO 120:1977 Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method
• ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings — Chemical composition and mechanical properties of sand cast reference test bars [Withdrawn: replaced with ISO 16220]
• ISO/R 122:1959 Composition of magnesium-aluminium-zinc alloy ingots for casting purposes [Withdrawn: replaced with ISO 121, and later ISO 16220]
• ISO 123:2001 Rubber latex — Sampling
• ISO 124:2014 Latex, rubber — Determination of total solids content
• ISO 125:2020 Natural rubber latex concentrate — Determination of alkalinity
• ISO 126:2005 Natural rubber latex concentrate — Determination of dry rubber content
• ISO 127:2018 Rubber, natural latex concentrate — Determination of KOH number
• ISO 128 Technical product documentation — General principles of representation^{[Note 3]}
• ISO 129 Technical product documentation — Indication of dimensions and tolerances^{[Note 3]}
  • ISO 129-1:2018 Part 1: General principles
  • ISO 129-4:2013 Part 4: Dimensioning of shipbuilding drawings
  • ISO 129-5:2018 Part 5: Dimensioning of structural metal work
• ISO/R 130:1959 Aircraft — Colour identification of mechanical control circuits [Withdrawn without replacement]
• ISO 131:1979 Acoustics — Expression of physical and subjective magnitudes of sound or noise in air [Withdrawn without replacement]
• ISO 132:2017 Rubber, vulcanized or thermoplastic — Determination of flex cracking and crack growth (De Mattia)
• ISO 133:1983 Rubber, vulcanized — Determination of crack growth (De Mattia) [Withdrawn: replaced with ISO 132]
• ISO 134:1973 Plain end steel tubes for general purposes [Withdrawn: replaced with ISO 4200]
• ISO/R 135:1959 Paper vocabulary — Second series of terms [Withdrawn: replaced with ISO 4046]
• ISO 136:1972 Steel — Simple torsion testing of wire [Withdrawn: replaced with ISO 7800]
• ISO 137:2015 Wool — Determination of fibre diameter — Projection microscope method
• ISO/R 138:1960 Textiles — Universal yarn count system [Withdrawn: replaced with ISO 1144]
• ISO 139:2005 Textiles — Standard atmospheres for conditioning and testing
• ISO 140 Acoustics — Measurement of sound insulation in buildings and of building elements
  • ISO 140-1:1997 Part 1: Requirements for laboratory test facilities with suppressed flanking transmission [Withdrawn: replaced with ISO 10140-(1–5)]
  • ISO 140-2:1991 Part 2: Determination, verification and application of precision data [Withdrawn: replaced with ISO 12999-1:2014]
  • ISO 140-3:1995 Part 3: Laboratory measurements of airborne sound insulation of building elements [Withdrawn: replaced with ISO 10140-(1–5)]
  • ISO 140-4:1998 Part 4: Field measurements of airborne sound insulation between rooms [Withdrawn: replaced with ISO 16283-1:2014]
  • ISO 140-5:1998 Part 5: Field measurements of airborne sound insulation of façade elements and façades [Withdrawn: replaced with ISO 16283-(1,3):2014]
  • ISO 140-6:1998 Part 6: Laboratory measurements of impact sound insulation of floors [Withdrawn: replaced with ISO 10140-(1–5)]
  • ISO 140-7:1998 Part 7: Field measurements of impact sound insulation of floors [Withdrawn: replaced with ISO 16283-(1–2)]
  • ISO 140-8:1997 Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavyweight standard floor [Withdrawn: replaced with ISO 10140-(1–5)]
  • ISO 140-9:1985 Part 9: Laboratory measurement of room-to-room airborne sound insulation of a suspended ceiling with a plenum above it [Withdrawn: replaced with ISO 10848-2]
  • ISO 140-10:1991 Part 10: Laboratory measurement of airborne sound insulation of small building elements [Withdrawn: replaced with ISO 10140-(1–5)]
  • ISO 140-11:1991 Part 11: Laboratory measurements of the reduction of transmitted impact sound by floor coverings on lightweight reference floors [Withdrawn: replaced with ISO 10140-(1–5)]
  • ISO 140-12:2000 Part 12: Laboratory measurement of room-to-room airborne and impact sound insulation of an access floor [Withdrawn: replaced with ISO 10848-2]
  • ISO/TR 140-13:1997 Part 13: Guidelines [Withdrawn: replaced with ISO 140-14]
  • ISO 140-14:2004 Part 14: Guidelines for special situations in the field [Withdrawn: replaced with ISO 16283-1:2014]
  • ISO 140-16:2006 Part 16: Laboratory measurement of the sound reduction index improvement by additional lining [Withdrawn: replaced with ISO 10140-(1–5)]
  • ISO 140-18:2006 Part 18: Laboratory measurement of sound generated by rainfall on building elements [Withdrawn: replaced with ISO 10140-(1,5):2016]
• ISO 141:1976 Textile machinery and accessories — Pirn winders and cross winders — Definition of left and right sides
• ISO 142:1976 Textile machinery and accessories — Weaving preparatory machines — Definition of left and right sides
• ISO 143:1977 Textile machinery and accessories — Weft pirns for automatic looms [Withdrawn without replacement]
• ISO 144:1973 Steel — Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
• ISO/R 145:1960 Steel — Wrapping test for wire [Withdrawn: replaced with ISO 7802]
• ISO 146:1984 Metallic materials — Hardness test — Verification of Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-2]
  • ISO 146-2:1993 Metallic materials — Verification of Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-2]
• ISO/R 147:1960 Load calibration of testing machines for tensile testing of steel [Withdrawn: replaced with ISO 7500-1]
• ISO 148 Metallic materials — Charpy pendulum impact test
  • ISO 148-1:2016 Part 1: Test method
  • ISO 148-2:2016 Part 2: Verification of testing machines
  • ISO 148-3:2016 Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
• ISO/R 149:1960 Modified Erichsen cupping test for steel sheet and strip [Withdrawn: replaced with ISO 8490]
• ISO 150:2018 Raw, refined and boiled linseed oil for paints and varnishes — Specifications and methods of test
• ISO 151:1974 Shipbuilding details — Marking of hatchway beams [Withdrawn without replacement]
• ISO/R 152:1960 Shipbuilding details — Marking of wooden hatchway covers [Withdrawn without replacement]
• ISO/R 153:1960 Shipbuilding details — Ordinary Glasses for scuttles and lights — Dimensions [Withdrawn without replacement]
• ISO/R 154: Shipbuilding details — Marking of rolled, drawn and extruded products in light metals or in light alloys [Withdrawn without replacement]
• ISO 155:2019 Belt drives — Pulleys — Limiting values for adjustment of centres
• ISO 156:1982 Metallic materials — Hardness test — Verification of Brinell hardness testing machines [Withdrawn: replaced with ISO 6506-2]
• ISO 157:1996 Coal — Determination of forms of sulfur
• ISO/R 158:1960 Coal — Determination of ash [Withdrawn: replaced with ISO 1171]
• ISO/R 159:1960 Coal — Determination of total sulfur by the Strambi method [Withdrawn without replacement]
• ISO 160:1980 Asbestos-cement pressure pipes and joints [Withdrawn without replacement]
• ISO 161 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures
  • ISO 161-1:2018 Part 1: Metric series
  • ISO 161-2:1996 Part 2: Inch-based series
• ISO 162:1985 Cinematography — Head gaps and sound records for three-, four-, or six-track magnetic sound records on 35 mm and single-track on 17,5 mm motion-picture film containing no picture — Positions and width dimensions
• ISO/R 163:1960 Cinematography — Magnetic striping of 16 mm film perforated along both edges [Withdrawn without replacement]
• ISO/R 164:1960 Aluminium and aluminium alloys — Castings — Chemical composition [Withdrawn: replaced with ISO 3522]
• ISO/R 165:1960 Metallic materials — Steel tubes — Flanging test [Withdrawn: replaced with ISO 8494]
• ISO/R 166:1960 Metallic materials — Steel tubes — Drift expanding test [Withdrawn: replaced with ISO 8493]
• ISO/R 167:1960 Metallic materials — Steel tubes — Bend test [Withdrawn: replaced with ISO 8491]
• ISO/R 168:1960 Stretchers [Withdrawn without replacement]
• ISO/R 169:1960 Sizes of photocopies (on paper) readable without optical devices [Withdrawn without replacement]
• ISO/R 170:1960 Shipbuilding — Anchor Chains — Stud links [Withdrawn: replaced with ISO 1704]
• ISO 171:1980 Plastics — Determination of bulk factor of moulding materials
• ISO 172:1978 Plastics — Phenol-formaldehyde mouldings — Detection of free ammonia
• ISO/R 173:1961 Plastics — Determination of the percentage of styrene in polystyrene with Wijs solution [Withdrawn without replacement]
• ISO 174:1974 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution [Withdrawn: replaced with ISO 1628-2]
• ISO 175:2010 Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals
• ISO 176:2005 Plastics — Determination of loss of plasticizers — Activated carbon method
• ISO 177:2016 Plastics — Determination of migration of plasticizers
• ISO 178:2019 Plastics — Determination of flexural properties
• ISO 179 Plastics — Determination of Charpy impact properties
  • ISO 179-1:2010 Part 1: Non-instrumented impact test
  • ISO 179-2:2020 Part 2: Instrumented impact test
• ISO 180:2019 Plastics — Determination of Izod impact strength
• ISO 181:1981 Plastics — Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod [Withdrawn without replacement]
• ISO 182 Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures
  • ISO 182-1:1990 Part 1: Congo red method
  • ISO 182-2:1990 Part 2: pH method
  • ISO 182-3:1993 Part 3: Conductometric method
  • ISO 182-4:1993 Part 4: Potentiometric method
• ISO 183:1976 Plastics — Qualitative evaluation of the bleeding of colorants [Withdrawn without replacement]
• ISO/R 184:1961 Grey cast irons — Brinell hardness test [Withdrawn without replacement]
• ISO 185:2020 Grey cast irons — Classification
• ISO 186:2002 Paper and board — Sampling to determine average quality
• ISO 187:1990 Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples
• ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
• ISO/R 189:1961 Principles of operation of standards marks [Withdrawn without replacement]
• ISO/R 190:1961 Tensile testing of light metals and their alloys [Withdrawn: replaced with ISO 6892-1]
• ISO/R 191:1971 Brinell hardness test for light metals and their alloys [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
• ISO/R 192:1971 Wickers hardness test for light metals and their alloys [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
• ISO/R 193:1961 Microcopies on transparent bases: sizes of recommended bases [Withdrawn without replacement]
• ISO 194:1981 Plastics — List of equivalent terms [Withdrawn: replaced with ISO 472]
• ISO/R 195:1961 Copper and copper alloys — Drift expanding test [Withdrawn: replaced with ISO 8493]
• ISO 196:1978 Wrought copper and copper alloys — Detection of residual stress — Mercury(I) nitrate test
• ISO 197 Copper and copper alloys — Terms and definitions
  • ISO 197-1:1983 Part 1: Materials
  • ISO 197-2:1983 Part 2: Unwrought products (Refinery shapes)
  • ISO 197-3:1983 Part 3: Wrought products
  • ISO 197-4:1983 Part 4: Castings
  • ISO 197-5:1980 Part 5: Methods of processing and treatment
• ISO/R 198:1961 Double-deck flat pallets for through transit of goods [Withdrawn without replacement]
• ISO 199:2014 Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values

ISO 200 – ISO 499[]

• ISO/R 200:1961 Rolling bearings — Tolerances — Definitions [Withdrawn: replaced with ISO 1132]
• ISO/R 201:1961 Rolling bearings — Radial internal clearance in unloaded radial groove type ball bearings with cylindrical bore [Withdrawn: replaced with ISO 5753]
• ISO/R 202:1961 Metallic materials — Steel tubes — Flattening Test [Withdrawn: replaced with ISO 8492]
• ISO/R 203:1961 Metallic materials — Interrupted uniaxial creep testing in tension — Method of test [Withdrawn without replacement]
• ISO 204:2018 Metallic materials — Uniaxial creep testing in tension — Method of test
• ISO/R 205:1961 Steel — Determination of proof stress and proving test at elevated temperature [Withdrawn: replaced with ISO 783, and later ISO 6892-2]
• ISO/R 206:1961 Steel — Creep stress rupture testing of at elevated temperatures [Withdrawn: replaced with ISO 204]
• ISO 207:1980 Magnesium and magnesium alloys — Unalloyed magnesium — Chemical composition [Withdrawn: replaced with ISO 8287]
• ISO/R 208:1961 Aluminium and aluminium alloys — Castings — Chemical composition (complement to ISO/R 164) [Withdrawn: replaced with ISO 3522]
• ISO 209:2007 Aluminium and aluminium alloys — Chemical composition
• ISO/TS 210:2014 Essential oils — General rules for packaging, conditioning and storage
• ISO/TS 211:2014 Essential oils — General rules for labelling and marking of containers
• ISO 212:2007 Essential oils — Sampling
• ISO 213:1982 Machine tools — Lathe tool posts — Overall internal height [Withdrawn without replacement]
• ISO 214:1976 Documentation — Abstracts for publications and documentation
• ISO 215:1986 Documentation — Presentation of contributions to periodicals and other serials
• ISO 216:2007 Writing paper and certain classes of printed matter — Trimmed sizes — A and B series, and indication of machine direction
• ISO 217:2013 Paper — Untrimmed sizes — Designation and tolerances for primary and supplementary ranges, and indication of machine direction
• ISO/R 218:1961 Scale of 35 mm microfilms for international exchange [Withdrawn without replacement]
• ISO/R 219:1961 Pesticides — Common names — Second series of terms [Withdrawn: replaced with ISO 1750]
• ISO/R 220:1961 Textile fibres — Some methods of sampling for testing [Withdrawn: replaced with ISO 1130]
• ISO 221:1976 Metallic materials — Steel tubes — Wall thicknesses [Withdrawn without replacement]
• ISO/R 222:1968 Aerospace — Characteristics of aircraft electrical systems [Withdrawn: replaced with ISO 1540]
• ISO 223:1975 Aircraft — Ground support electrical supplies — General requirements [Withdrawn: replaced with ISO 6858]
• ISO/TR 224:1998 Aircraft — Declaration of design and performance for aircraft equipment — Standard form [Withdrawn without replacement]
• ISO 225:2010 Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions
• ISO 226:2003 Acoustics — Normal equal-loudness-level contours
• ISO 227:1978 Textile machinery and accessories — Single box pickers for centre tip shuttles for automatic looms and related picking stick dimensions [Withdrawn without replacement]
• ISO 228 Pipe threads where pressure-tight joints are not made on the threads
• ISO 229:1973 Machine tools — Speeds and feeds
• ISO 230 Test code for machine tools
  • ISO 230-1:2012 Part 1: Geometric accuracy of machines operating under no-load or quasi-static conditions
  • ISO 230-2:2014 Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes
  • ISO 230-3:2020 Part 3: Determination of thermal effects
  • ISO 230-4:2005 Part 4: Circular tests for numerically controlled machine tools
  • ISO 230-5:2000 Part 5: Determination of the noise emission
  • ISO 230-6:2002 Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)
  • ISO 230-7:2015 Part 7: Geometric accuracy of axes of rotation
  • ISO/TR 230-8:2010 Part 8: Vibrations
  • ISO/TR 230-9:2005 Part 9: Estimation of measurement uncertainty for machine tool tests according to series ISO 230, basic equations
  • ISO 230-10:2016 Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
  • ISO/TR 230-11:2018 Part 11: Measuring instruments suitable for machine tool geometry tests
• ISO/R 231:1961 Paper vocabulary — Third series of terms [Withdrawn: replaced with ISO 4046]
• ISO/R 232:1961 Straight-sides splines and gauges — Dimensions in inches [Withdrawn without replacement]
• ISO 233 Information and documentation — Transliteration of Arabic characters into Latin characters^{[Note 3]}
• ISO 234 Files and rasps
  • ISO 234-1:1983 Part 1: Dimensions
  • ISO 234-2:1982 Part 2: Characteristics of cut
• ISO 235:2016 Parallel shank jobber and stub series drills and Morse taper shank drills
• ISO 236 Reamers^{[Note 3]}
  • ISO 236-1:1976 Hand reamers
  • ISO 236-2:2013 Part 2: Long fluted machine reamers with Morse taper shanks
• ISO 237:1975 Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares
• ISO 238:2016 Reduction sleeves and extension sockets for tools with Morse taper shanks
• ISO 239:1999 Drill chuck tapers
• ISO 240:2016 Milling cutters — Interchangeability dimensions for cutter arbors or cutter mandrels
• ISO 241:1994 Shanks for turning and planing tools — Shapes and dimensions of the section
• ISO 242:2014 Carbide tips for brazing on turning tools
• ISO 243:2014 Turning tools with carbide tips — External tools
• ISO 244:1979 Aircraft — Sealing wire
• ISO 245:1998 Aerospace — Lockwire — Diameters
• ISO 246:2007 Rolling bearings — Cylindrical roller bearings, separate thrust collars — Boundary dimensions
• ISO 247 Rubber — Determination of ash
  • ISO 247-1:2018 Part 1: Combustion method
  • ISO 247-2:2018 Part 2: Thermogravimetric analysis (TGA)
• ISO 248 Rubber, raw – Determination of volatile-matter content
  • ISO 248-1:2011 Part 1: Hot-mill method and oven method
  • ISO 248-2:2019 Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit
• ISO 249:2016 Rubber, raw natural — Determination of dirt content
• ISO/R 250:1962 Rubber, raw natural — Sampling and preparation [Withdrawn: replaced with ISO 1795 and ISO 1796 (which was later replaced by ISO 1795)]
• ISO 251:2012 Conveyor belts with textile carcass — Widths and lengths
• ISO 252:2007 Conveyor belts — Adhesion between constitutive elements — Test methods
• ISO/R 253:1962 Belt drives — Grooved pulleys — sections Y and Z [Withdrawn: replaced with ISO 4183]
• ISO 254:2011 Belt drives — Pulleys — Quality, finish and balance
• ISO 255:1990 Belt drives — Pulleys for V-belts (system based on datum width) — Geometrical inspection of grooves
• ISO/R 256:1962 Belt drives — Section checking for V-belts [Withdrawn without replacement]
• ISO 257:2018 Pesticides and other agrochemicals — Principles for the selection of common names
• ISO/R 258:1961 Pesticides — Common names — Third series of terms [Withdrawn: replaced with ISO 1750]
• ISO 259 Information and documentation — Transliteration of Hebrew characters into Latin characters^{[Note 3]}
• ISO/R 260:1962 Terms related to microcopies and their bases [Withdrawn without replacement]
• ISO 261:1998 ISO general purpose metric screw threads — General plan
• ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
• ISO 263:1973 ISO inch screw threads — General plan and selection for screws, bolts and nuts — Diameter range 0,06 to 6 in'
• ISO 264:1976 Unplasticized polyvinyl chloride (PVC) fittings with plain sockets for pipes under pressure — Laying lengths — Metric series [Withdrawn: replaced with ISO 1452-3]
• ISO 265 Pipes and fittings of plastics materials — Fittings for domestic and industrial waste pipes — Basic dimensions: Metric series
  • ISO 265-1:1988 Part 1: Unplasticized poly(vinyl chloride) (PVC-U)
• ISO 266:1997 Acoustics — Preferred frequencies
• ISO/R 267:1962 Aircraft — Figures for instrument dials and number plates [Withdrawn without replacement]
• ISO 268:1980 Aircraft — Mechanical and electromechanical indicators — General requirements
• ISO 269:1985 Correspondence envelopes – Designation and sizes [Withdrawn without replacement]
• ISO 270:1975 Textile fibres — Determination of length by measuring individual fibres [Withdrawn: replaced with ISO 6989]
• ISO/R 271:1962 Textiles — Implementation of the Tex System for designating the size of fibres [Withdrawn: replaced with ISO 1144]
• ISO 272:1982 Fasteners — Hexagon products — Widths across flats
• ISO 273:1979 Fasteners — Clearance holes for bolts and screws
• ISO 274:1975 Copper tubes of circular section — Dimensions [Withdrawn without replacement]
• ISO/R 275:1962 Zinc Oxide for paints — Requirements and methods of test [Withdrawn without replacement]
• ISO 276:2019 Binders for paints and varnishes — Linseed stand oil — Requirements and methods of test
• ISO 277:2002 Binders for paints and varnishes — Raw tung oil — Requirements and methods of test
• ISO/R 278:1962 Essential oils — Standard layout for methods of analysis of essential oils [Withdrawn without replacement]
• ISO 279:1998 Essential oils — Determination of relative density at 20 degrees C – Reference method
• ISO 280:1998 Essential oils — Determination of refractive index
• ISO 281:2007 Rolling bearings — Dynamic load ratings and rating life
• ISO 282:1992 Conveyor belts — Sampling
• ISO 283:2015 Textile conveyor belts — Full thickness tensile strength, elongation at break and elongation at the reference load — Test method
• ISO 284:2012 Conveyor belts – Electrical conductivity – Specification and test method
• ISO/R 285:1962 Metallic materials — Steel tubes — Butt welding bends
• ISO 286 Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes
  • ISO 286-1:2010 Part 1: Basis of tolerances, deviations and fits
  • ISO 286-2:2010 Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
• ISO 287:2017 Paper and board — Determination of moisture content of a lot — Oven-drying method
• ISO/R 288
  • ISO/R 288-1:1963 Part 1: Slotted and castle nuts with metric thread [Withdrawn without replacement]
  • ISO/R 288-2:1969 Part 2: Slotted and castle nuts with metric thread 42 up to and including 100 mm thread diameter [Withdrawn without replacement]
• ISO 289 Rubber, unvulcanized — Determinations using a shearing-disc viscometer
  • ISO 289-1:2015 Part 1: Determination of Mooney viscosity
  • ISO 289-2:2020 Part 2: Determination of pre-vulcanization characteristics
  • ISO 289-3:2015 Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR
  • ISO 289-4:2003 Part 4: Determination of the Mooney stress-relaxation rate
• ISO/R 290:1961 Pesticides — Common names — Fourth series of terms [Withdrawn: replaced by ISO 1750]
• ISO 291:2008 Plastics — Standard atmospheres for conditioning and testing
• ISO/R 292:1967 Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics [Withdrawn: replaced by ISO 1133]
• ISO 293:2004 Plastics — Compression moulding of test specimens of thermoplastic materials
• ISO 294 Plastics — Injection moulding of test specimens of thermoplastic materials
  • ISO 294-1:2017 Part 1: General principles, and moulding of multipurpose and bar test specimens
  • ISO 294-2:2018 Part 2: Small tensile bars
  • ISO 294-3:2020 Part 3: Small plates
  • ISO 294-4:2018 Part 4: Determination of moulding shrinkage
  • ISO 294-5:2017 Part 5: Preparation of standard specimens for investigating anisotropy
• ISO 295:2004 Plastics — Compression moulding of test specimens of thermosetting materials
• ISO 296:1991 Machine tools — Self-holding tapers for tool shanks
• ISO 297:1988 7/24 tapers for tool shanks for manual changing
• ISO 298:1973 Machine tools — Lathe centres — Sizes for interchangeability
• ISO 299:1987 Machine tool tables — T-slots and corresponding bolts
• ISO/R 300 Rolling bearings — ISO identification code
  • ISO/R 300-1:1963 Rolling bearings — ISO identification code for group I: Radial Ball and Rolling Bearings, group II: Thrust Ball and Rolling Bearings, and group III: Tapered Rolling Bearings, Metric Series [Withdrawn without replacement]
  • ISO/R 300-2:1965 Rolling bearings — ISO identification code for group IV: Tapered Rolling Bearings, Inch Series [Withdrawn without replacement]
• ISO 301:2006 Zinc alloy ingots intended for castings
• ISO 302:2015 Pulps — Determination of Kappa number
• ISO 303:2002 Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers [Withdrawn without replacement]
• ISO 304:1985 Surface active agents — Determination of surface tension by drawing up liquid films
• ISO 305:2019 Plastics — Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds — Discoloration method
• ISO 306:2013 Plastics — Thermoplastic materials – Determination of Vicat softening temperature (VST)
• ISO 307:2019 Plastics — Polyamides — Determination of viscosity number
• ISO 308:1994 Plastics — Phenolic moulding materials — Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
• ISO/R 309 Manganese ores — Methods of sampling
  • ISO/R 309-1:1963 Manganese ores — Methods of sampling — Part 1: Ore loaded in freight wagons [Withdrawn without replacement]
• ISO 310:1992 Manganese ores and concentrates — Determination of hygroscopic moisture content in analytical samples — Gravimetric method
• ISO/R 311:1963 Manganese ores and concentrates — Determination of silicon content [Withdrawn: replaced with ISO 5890]
• ISO 312:1986 Manganese ores — Determination of active oxygen content, expressed as manganese dioxide — Titrimetric method
• ISO/R 313:1963 Manganese ores and concentrates — Determination of total iron content [Withdrawn: replaced with ISO 7990]
• ISO 314:1981 Manganese ores — Determination of carbon dioxide content — Gravimetric method [Withdrawn without replacement]
• ISO 315:1984 Manganese ores and concentrates — Determination of nickel content — Dimethylglyoxime spectrometric method and flame atomic absorption spectrometric method
• ISO 316:1982 Manganese ores — Determination of cobalt content — Nitroso-R-salt photometric method [Withdrawn without replacement]
• ISO 317:1984 Manganese ores and concentrates — Determination of arsenic content — Spectrometric method
• ISO/R 318:1963 Manganese ores and concentrates — Determination of aluminium content [Withdrawn: replaced with ISO 4295]
• ISO/R 319:1963 Manganese ores and concentrates — Determination of manganese content [Withdrawn: replaced with ISO 4298]
• ISO 320:1981 Manganese ores — Determination of sulphur content — Barium sulphate gravimetric methods and sulphur dioxide titrimetric method after combustion
• ISO/R 321:1963 Manganese ores and concentrates — Determination of phosphorus content [Withdrawn: replaced with ISO 4293]
• ISO/R 322:1978 Manganese ores and concentrates — Determination of copper content [Withdrawn: replaced with ISO 4294]
• ISO/R 323:1963 Manganese ores and concentrates — Determination of lead content [Withdrawn without replacement]
• ISO 324:1978 Textile machinery and accessories — Cones for cross winding for dyeing purposes — Half angle of the cone 4 degrees 20' [Withdrawn: replaced with ISO 8489-4]
• ISO/R 325:1963 Textile machinery and accessories — Wood cones for cross winding — Half angle of the cone 4 degrees 20' [Withdrawn without replacement]
• ISO/R 326:1963 Textile machinery and accessories — Wood cones for cross winding — Nominal half angle of the cone 5 degrees 57' [Withdrawn without replacement]
• ISO/R 327:1963 Textile machinery and accessories — Wood cones for cross winding — Half angle of the cone 3 degrees 30' [Withdrawn without replacement]
• ISO 328:1974 Picture postcards and lettercards — Size [Withdrawn without replacement]
• ISO/R 329:1963 Large pallets for through transit of goods [Withdrawn without replacement]
• ISO/R 330:1963 Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Inch-based series [Withdrawn: replaced with ISO 161-2]
• ISO 331:1983 Coal — Determination of moisture in the analysis sample — Direct gravimetric method [Withdrawn without replacement]
• ISO 332:1981 Coal — Determination of nitrogen — Macro Kjeldahl method [Withdrawn without replacement]
• ISO 333:1996 Coal — Determination of nitrogen — Semi-micro Kjeldahl method [Withdrawn without replacement]
• ISO 334:2020 Coal and coke — Determination of total sulfur — Eschka method
• ISO 335:1974 Hard coal — Determination of caking power — Roga test [Withdrawn without replacement]
• ISO 336:1976 Plain end steel tubes, welded and seamless — General table of dimensions and masses per unit length [Withdrawn: replaced with ISO 4200]
• ISO 337:1981 Road vehicles — 50 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions
• ISO/R 338:1963 Lifeboats for less than one hundred people [Withdrawn without replacement]
• ISO/R 339:1963 Definition of terms appearing in ISO recommendations for oils and pigments [Withdrawn without replacement]
• ISO 340:2013 Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method
• ISO 341:1976 Textile machinery and accessories — Cotton spinning machinery — Working width [Withdrawn without replacement]
• ISO 342:1983 Textile machinery and accessories — Worsted and woollen cards — Width of cylinder and width on the wire [Withdrawn without replacement]
• ISO/R 343:1963 Textile machinery and accessories — Warp tubes for ring spinning and ring doubling spindles — inch dimensions, tolerances, and gauges [Withdrawn without replacement]
• ISO 344:1981 Textile machinery and accessories — Spinning machines — Flyer bobbins [Withdrawn without replacement]
• ISO/R 345:1963 Shipbuilding details — Tests on galvanized steel wire ropes [Withdrawn without replacement]
• ISO/R 346:1963 Shipbuilding details — Galvanized steel wire ropes [Withdrawn without replacement]
• ISO/R 347:1963 Shipbuilding details — Anchor chains- End shackles [Withdrawn without replacement]
• ISO 348:1981 Hard coal — Determination of moisture in the analysis sample — Direct volumetric method [Withdrawn without replacement]
• ISO 349:2020 Hard coal — Audibert-Arnu dilatometer test
• ISO/R 350:1963 Hard coal — Determination of chlorine by the bomb-combustion method [Withdrawn without replacement]
• ISO 351:1996 Solid mineral fuels — Determination of total sulfur — High temperature combustion method [Withdrawn without replacement]
• ISO 352:1981 Solid mineral fuels — Determination of chlorine — High temperature combustion method [Withdrawn without replacement]
• ISO 353:1975 Processed writing paper and certain classes of printed matter — Method of expression of dimensions [Withdrawn without replacement]
• ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
• ISO 355:2019 Rolling bearings — Tapered roller bearings — Boundary dimensions and series designations
• ISO 356:1996 Essential oils — Preparation of test samples
• ISO/R 357:1963 Acoustics — Expression of the physical magnitudes of sound or noise in air [Withdrawn: replaced with ISO 131, now withdrawn without replacement]
• ISO 358:1975 Cinematography — Maximum aspect ratio of projector aperture for projection of 35 mm non-anamorphic motion-picture film — Specifications [Withdrawn without replacement]
• ISO 359:1983 Cinematography — Projectable image area on 16 mm motion-picture prints — Dimensions and location
• ISO 360:1975 Cinematography — Recording and reproducing head gaps for four-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions [Withdrawn: replaced with ISO 162]
• ISO 361:1975 Basic ionizing radiation symbol
• ISO 362 Measurement of noise emitted by accelerating road vehicles — Engineering method
  • ISO 362-1:2015 Part 1: M and N categories
  • ISO 362-2:2009 Part 2: L category
  • ISO 362-3:2016 Part 3: Indoor testing M and N categories
• ISO 363 Textile machinery and accessories — Flat steel healds with closed end loops
  • ISO 363-1:2006 Part 1: Dimensions of healds manufactured of rolled steel wire
  • ISO 363-2:2006 Part 2: Dimensions of healds manufactured of hardened strip steel
• ISO 364:1983 Textile machinery and accessories — Twin wire healds for weaving machines with heald frames
• ISO 365:1982 Textile machinery and accessories — Twin wire healds with inset mail for Jacquard weaving
• ISO 366 Textile machinery and accessories — Reeds
  • ISO 366-2:2009 Part 2: Dimensions and designation of metal reeds with plate baulk
  • ISO 366-3:2009 Part 3: Dimensions and designation of metal reeds with double-spring baulk
  • ISO 366-4:2005 Part 4: Dimensions and designation of plastic-bound metal reeds
  • ISO 366-5:2006 Part 5: Dimensions and designation of profile capsules
• ISO 367:1976 Textile machinery and accessories — Metal reeds with plate baulk — Dimensions [Withdrawn: replaced with ISO 366-2]
• ISO 368:2017 Spinning preparatory, spinning and doubling (twisting) machinery — Tubes for ring-spinning, doubling and twisting spindles, taper 1:38 and 1:64
• ISO 369:2009 Machine tools — Symbols for indications appearing on machine tools
• ISO 370:1975 Toleranced dimensions — Conversion from inches into millimetres and vice versa [Withdrawn without replacement]
• ISO/R 371:1964 Terms relating to microcopy apparatus [Withdrawn without replacement]
• ISO/R 372:1964 Paper vocabulary — Fourth series of terms [Withdrawn: replaced with ISO 4046]
• ISO/R 373:1964 General principles for fatigue testing of metals [Withdrawn without replacement]
• ISO 374 Protective gloves against dangerous chemicals and micro-organisms
  • ISO 374-1:2016 Part 1: Terminology and performance requirements for chemical risks
  • ISO 374-2:2019 Part 2: Determination of resistance to penetration
  • ISO 374-4:2019 Part 4: Determination of resistance to degradation by chemicals
  • ISO 374-5:2016 Part 5: Terminology and performance requirements for micro-organisms risks
• ISO 375:1974 Steel — Tensile testing of tubes [Withdrawn: replaced with ISO 6892-1]
• ISO 376:2011 Metallic materials — Calibration of force-proving instruments used for the verification of uniaxial testing machines
• ISO 377:2017 Steel and steel products — Location and preparation of samples and test pieces for mechanical testing
• ISO 378:1980 Gymnastic equipment — Parallel bars [Withdrawn without replacement]
• ISO 379:1980 Gymnastic equipment — Horizontal bar [Withdrawn without replacement]
• ISO/R 380:1964 Gymnastic equipment — Rings [Withdrawn without replacement]
• ISO/R 381:1964 Gymnastic equipment — Vaulting horse and pommeled horse [Withdrawn without replacement]
• ISO/R 382:1964 Gymnastic equipment — Balancing Beam [Withdrawn without replacement]
• ISO 383:1976 Laboratory glassware — Interchangeable conical ground joints
• ISO 384:2015 Laboratory glass and plastics ware — Principles of design and construction of volumetric instruments
• ISO 385:2005 Laboratory glassware — Burettes
• ISO 386:1977 Liquid-in-glass laboratory thermometers — Principles of design, construction and use
• ISO 387:1977 Hydrometers — Principles of construction and adjustment
• ISO/R 388:1964 ISO metric series for basic thicknesses of sheet and diameters of wire [Withdrawn without replacement]
• ISO 389 Acoustics — Reference zero for the calibration of audiometric equipment
  • ISO 389-1:2017 Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones
  • ISO 389-2:1994 Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones
  • ISO 389-3:2016 Part 3: Reference equivalent threshold vibratory force levels for pure tones and bone vibrators
  • ISO 389-4:1994 Part 4: Reference levels for narrow-band masking noise
  • ISO 389-5:2006 Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
  • ISO 389-6:2007 Part 6: Reference threshold of hearing for test signals of short duration
  • ISO 389-7:2019 Part 7: Reference threshold of hearing under free-field and diffuse-field listening conditions
  • ISO 389-8:2004 Part 8: Reference equivalent threshold sound pressure levels for pure tones and circumaural earphones
  • ISO 389-9:2009 Part 9: Preferred test conditions for the determination of reference hearing threshold levels
• ISO 390:1993 Products in fibre-reinforced cement — Sampling and inspection
• ISO 391:1982 Building and sanitary pipes in asbestos-cement [Withdrawn without replacement]
• ISO 392:1986 Asbestos-cement pipe fittings for building and sanitary purposes
• ISO 393 Asbestos-cement products — Corrugated sheets and fittings for roofing and cladding
  • ISO 393-1:1983 Asbestos-cement products — Part 1: Corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
  • ISO 393-2:1986 Asbestos-cement products — Part 2: Asbestos-cement-cellulose corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
  • ISO 393-3:1984 Asbestos-cement products — Part 3: Asymmetrical section corrugated sheets and fittings for roofing and cladding [Withdrawn without replacement]
  • ISO 393-4:1986 Asbestos-cement products — Part 4: Trapezoidal section sheets for roofing and cladding [Withdrawn without replacement]
  • ISO 393-5:1987 Asbestos-cement products — Part 5: Short corrugated and asymmetrical section sheets and fittings for roofing [Withdrawn without replacement]
• ISO/R 394:1964 Asymmetrical section corrugated sheets in asbestos-cement for roofing and cladding [Withdrawn without replacement]
• ISO 395:1983 Asbestos-cement slates [Withdrawn without replacement]
• ISO 396 Products in fibre reinforced cement
  • ISO 396-1:1980 Part 1: Asbestos-cement flat sheets [Withdrawn without replacement]
  • ISO 396-2:1980 Part 2: Silica-asbestos-cement flat sheets [Withdrawn without replacement]
  • ISO 396-3:1980 Part 3: Cellulose-asbestos-cement flat sheets [Withdrawn without replacement]
• ISO/R 397:1964 Copper and copper alloys — Wire — Wrapping test [Withdrawn: replaced with ISO 7802]
• ISO/R 398:1964 Copper and copper alloys — Bend test [Withdrawn: replaced with ISO 7438]
• ISO/R 399:1964 Copper and copper alloys — Vickers hardness test [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
• ISO/R 400:1964 Copper and copper alloys — Tensile test [Withdrawn: replaced with ISO 6892-1]
• ISO/R 401:1964 Copper and copper alloys — Tubes of circular section — Tensile test [Withdrawn: replaced with ISO 6892-1]
• ISO/R 402:1964 Copper and copper alloys — Wire — Tensile test [Withdrawn: replaced with ISO 6892-1]
• ISO/R 403:1964 Copper and copper alloys — Brinell hardness test [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
• ISO 404:2013 Steel and steel products — General technical delivery requirements
• ISO/R 405:1964 Aircraft — Tow bar attachment fittings — Interface requirements [Withdrawn: replaced with ISO 8267, and later ISO 8267-1 and ISO 8267-2]
• ISO 406:1987 Technical drawings — Tolerancing of linear and angular dimensions [Withdrawn: replaced with ISO 129-1 and ISO 14405-2]
• ISO 407:2004 Small medical gas cylinders — Pin-index yoke-type valve connections
• ISO/R 408:1964 Safety Colours [Withdrawn: replaced with ISO 3864-1]
• ISO 409 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces
  • ISO 409-1:1982 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 1: HV 5 to HV 100 [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
  • ISO 409-2:1983 Metallic materials — Hardness test — Tables of Vickers hardness values for use in tests made on flat surfaces — Part 2: HV 0,2 to less than HV 5 [Withdrawn: replaced with ISO 6507-1 and ISO 6507-4]
• ISO 410:1982 Metallic materials — Hardness test — Tables of Brinell hardness values for use in tests made on flat surfaces [Withdrawn: replaced with ISO 6506-1 and ISO 6506-4]
• ISO/R 411:1964 Pesticides — Common names — Fifth series of terms [Withdrawn: replaced with ISO 1750]
• ISO 412:1976 Gum spirit of turpentine and wood turpentines for paints and varnishes [Withdrawn without replacement]
• ISO 413:1974 Aircraft — Heads of lubricating nipples
• ISO/R 414:1965 Aircraft — Tyre Valves [Withdrawn without replacement]
• ISO 415:1975 Envelopes, postcards and similar articles — Cancellation area [Withdrawn without replacement]
• ISO 416:1974 Picture postcards — Area reserved for the address [Withdrawn without replacement]
• ISO 417:1993 Photography — Determination of residual thiosulfate and other related chemicals in processed photographic materials — Methods using iodine-amylose, methylene blue and silver sulfide [Withdrawn: replaced with ISO 18917]
• ISO 418:2001 Photography — Processing chemicals — Specifications for anhydrous sodium sulfite
• ISO 419:1972 Photography — Processing chemicals — Specifications for sodium thiosulfate pentahydrate [Withdrawn: replaced with ISO 10636]
• ISO 420:1994 Photography — Processing chemicals — Specifications for potassium bromide
• ISO/R 421:1965 Photography — Processing chemicals — Method for indicating the stability of the images of processed black-and white films, plates, and papers [Withdrawn without replacement]
• ISO 422:1994 Photography — Processing chemicals — Specifications for p-methylaminophenol sulfate
• ISO 423:1994 Photography — Processing chemicals — Specifications for hydroquinone
• ISO 424:1994 Photography — Processing chemicals — Specifications for anhydrous sodium carbonate and sodium carbonate monohydrate
• ISO 425:1973 Photography — Sensitized materials — Quantity packaging [Withdrawn without replacement]
• ISO 426 Wrought copper-zinc alloys — Chemical composition and forms of wrought products
  • ISO 426-1:1983 Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 1: Non-leaded and special copper-zinc alloys [Withdrawn without replacement]
  • ISO 426-2:1983 Wrought copper-zinc alloys — Chemical composition and forms of wrought products — Part 2: Leaded copper-zinc alloys [Withdrawn without replacement]
• ISO 427:1983 Wrought copper-tin alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
• ISO 428:1983 Wrought copper-aluminium alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
• ISO 429:1983 Wrought copper-nickel alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
• ISO 430:1983 Wrought copper-nickel-zinc alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
• ISO 431:1981 Copper refinery shapes [Withdrawn without replacement]
• ISO 432:1989 Ply type conveyor belts — Characteristics of construction [Withdrawn without replacement]
• ISO 433:2017 Conveyor belts — Marking
• ISO/R 434:1965 Y-section V-belts — Lengths [Withdrawn: replaced by ISO 4184]
• ISO 435:1975 Micrographics — ISO character — Description and use [Withdrawn: replaced by ISO 446]
• ISO/R 436:1965 Informative labelling [Withdrawn without replacement]
• ISO 437:1982 Steel and cast iron — Determination of total carbon content — Combustion gravimetric method [Withdrawn without replacement]
• ISO 438:1980 Paper — Determination of bulking thickness and apparent density [Withdrawn: replaced by ISO 534]
• ISO 439:2020 Steel and cast iron — Determination of silicon content — Gravimetric method
• ISO/R 440:1965 Aircraft — shape, size, and direction of operation of lever controls [Withdrawn without replacement]
• ISO 441:1997 Textile machinery and accessories — Drop wires for warp stop motions for weaving machines without automatic drawing-in
• ISO/R 442:1965 Verification of pendulum impact testing machines for testing steels [Withdrawn without replacement]
• ISO/R 443:1965 Aircraft — Marking of gas cylinders [Withdrawn without replacement]
• ISO 444:1981 Phlogopite mica blocks, thins and splittings — Grading by size [Withdrawn without replacement]
• ISO 445:2013 Pallets for materials handling — Vocabulary
• ISO 446:2004 Micrographics — ISO character and ISO test chart No. 1 — Description and use
• ISO 447:1984 Machine tools — Direction of operation of controls
• ISO 448:1981 Gas cylinders for industrial use — Marking for identification of content [Withdrawn without replacement]
• ISO 449:1997 Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class A [Withdrawn: replaced with ISO 25862]
• ISO 450:1975 Aircraft — Connection for water of drinkable quality [Withdrawn: replaced with ISO 17775]
• ISO 451:1976 Aircraft — Pressure re-oiling connection
• ISO/R 452:1965 Essential characteristics of 35mm microfilm ready apparatus [Withdrawn without replacement]
• ISO/R 453:1965 Surface active agents — Vocabulary — First list [Withdrawn: replaced with ISO 862]
• ISO 454:1975 Acoustics — Relation between sound pressure levels of narrow bands of noise in a diffuse field and in a frontally-incident free field for equal loudness [Withdrawn without replacement]
• ISO/R 455:1965 Analysis of soaps — Determination of total crude fatty acids [Withdrawn: replaced with ISO 685]
• ISO 456:1973 Surface active agents — Analysis of soaps — Determination of free caustic alkali
• ISO 457:1983 Soaps — Determination of chloride content — Titrimetric method
• ISO 458 Plastics — Determination of stiffness in torsion of flexible materials
  • ISO 458-1:1985 Part 1: General method
  • ISO 458-2:1985 Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
• ISO/R 459:1962 Narrow V-belts — Grooved pulleys — Groove sections SPZ, SPA, SPB [Withdrawn: replaced with ISO 4183]
• ISO/R 460:1962 Narrow V-belts — Lengths — Groove sections SPZ, SPA, SPB [Withdrawn: replaced with ISO 4184]
• ISO 461 Aircraft — Connectors for ground electrical supplies
  • ISO 461-1:2003 Part 1: Design, performance and test requirements
  • ISO 461-2:1985 Part 2: Dimensions
• ISO/R 462:1965 Plastics — Determination of the change of mechanical properties after contact with chemical substances [Withdrawn: replaced with ISO 175]
• ISO 463:2006 Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges
• ISO 464:2015 Rolling bearings — Radial bearings with locating snap ring — Dimensions, geometrical product specifications (GPS) and tolerance values
• ISO/R 465:1965 Rolling bearings — Double row self-aligning roller bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
• ISO 466:1976 Cinematography — Image produced by 16 mm motion-picture camera aperture — Position and dimensions
• ISO/R 467:1966 Preferred modules and diametral pitches of cylindrical gears for general engineering [Withdrawn without replacement]
• ISO 468:1982 Surface roughness — Parameters, their values and general rules for specifying requirements [Withdrawn without replacement]
• ISO/R 469:1966 Aircraft — Conductors for general purpose aircraft electrical cables — Dimensions and characteristics [Withdrawn: replaced with ISO 2635]
• ISO/R 470:1966 Aircraft — Conductors for heat-resisting aircraft electrical cables — Dimensions and characteristics [Withdrawn: replaced with ISO 2635]
• ISO 471:1995 Rubber — Temperatures, humidities and times for conditioning and testing [Withdrawn: replaced with ISO 23529]
• ISO 472:2013 Plastics — Vocabulary
• ISO 473:2019 Lithopone pigments — General requirements and methods of testing
• ISO/R 474:1966 Aircraft — Conductors for general purpose aircraft electrical cables — Performance requirements [Withdrawn without replacement]
• ISO/R 475:1966 Rectangular refractory bricks — Dimensions [Withdrawn: replaced with ISO 5019-1]
• ISO 476:1982 Textile machinery and accessories — Pirn winding machines — Vocabulary
• ISO 477:1982 Textile machinery and accessories — Cone and cheese winding machines — Vocabulary
• ISO 478:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO primary range [Withdrawn: replaced with ISO 217]
• ISO 479:1975 Paper — Untrimmed sizes — Designation and tolerances [Withdrawn: replaced with ISO 217]
• ISO/R 480:1966 Perforated metal cheese centres for bast fibre yearns [Withdrawn without replacement]
• ISO 481:1977 Textile machinery and accessories — Warper's beams — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-2]
• ISO 482:1977 Aircraft — Propulsion units and components — Methods of numbering and describing direction of rotation
• ISO 483:2005 Plastics — Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value
• ISO 484 Shipbuilding — Ship screw propellers — Manufacturing tolerances
  • ISO 484-1:2015 Part 1: Propellers of diameter greater than 2,50 m
  • ISO 484-2:2015 Part 2: Propellers of diameter between 0,80 and 2,50 m inclusive
• ISO 485:1973 Aircraft water-methanol pressure connections
• ISO 486:1988 Cinematography — 16 mm motion-picture film perforated 8 mm Type R — Cutting and perforating dimensions
• ISO 487:1998 Steel roller chains, types S and C, attachments and sprockets
• ISO 488:2008 Milk — Determination of fat content — Gerber butyrometers
• ISO 489:1999 Plastics — Determination of refractive index
• ISO 490:1993 Cinematography — Magnetic stripes and magnetic recording head gaps for sound record on 16 mm motion-picture film perforated along one edge (Type 1) — Positions and width dimensions
• ISO 491:2002 Cinematography — 35 mm motion-picture film and magnetic film — Cutting and perforating dimensions
• ISO 492:2014 Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values
• ISO 493:1975 Aircraft — Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches
• ISO 494:2017 Cylindrical shank twist drills — Long series
• ISO 495:1966 Acoustics — Determination of sound power levels of noise sources [Withdrawn: replaced with ISO 3740, ISO 3741, ISO 3742, ISO 3743, ISO 3744, ISO 3745, and ISO 3746]
• ISO 496:1973 Driving and driven machines — Shaft heights [Withdrawn without replacement]
• ISO 497:1973 Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
• ISO 498:1992 Natural rubber latex concentrate — Preparation of dry films
• ISO/R 499:1966 Paper — Internal diameters of cores of reels [Withdrawn without replacement]

ISO 500 – ISO 699[]

• ISO 500 Agricultural tractors — Rear-mounted power take-off types 1, 2, 3 and 4^{[Note 3]}
• ISO 501:2012 Hard coal — Determination of the crucible swelling number
• ISO 502:2015 Coal — Determination of caking power — Gray-King coke test
• ISO/R 503:1966 Wrought magnesium-aluminium-zinc alloys — Chemical composition [Withdrawn: replaced with ISO 3116]
• ISO 504:1975 Turning tools with carbide tips — Designation and marking
• ISO 505:2017 Conveyor belts — Method for the determination of the tear propagation resistance of textile conveyor belts
• ISO 506:2020 Rubber latex, natural, concentrate — Determination of volatile fatty acid number
• ISO/R 507:1970 Acoustics — Procedure for describing aircraft noise heard on the ground using frequency weighting [Withdrawn: replaced with ISO 3891]
• ISO/R 508:1966 Ships and marine technology — Identification colours for the content of piping systems [Withdrawn: replaced with ISO 14726-1, now ISO 14726]
• ISO 509:1996 Pallet trucks — Principal dimensions [Withdrawn without replacement]
• ISO 510:1977 Red lead for paints
• ISO 511:1977 White lead pigments for paints [Withdrawn without replacement]
• ISO 512:1979 Road vehicles — Sound signalling devices — Technical specifications [Withdrawn without replacement]
• ISO 513:2012 Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application
• ISO 514:2014 Turning tools with carbide tips — Internal tools
• ISO 515:1973 Photography — Stereo systems using 35 mm objectives on 35 mm film, five-perforation format — Specifications [Withdrawn without replacement]
• ISO 516:2019 Camera shutters — Timing — General definition and mechanical shutter measurements
• ISO 517:2008 Photography — Apertures and related properties pertaining to photographic lenses — Designations and measurements
• ISO 518:2006 Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification
• ISO 519:1992 Photography — Hand-held cameras — Flash-connector dimensions
• ISO 520:2010 Cereals and pulses — Determination of the mass of 1 000 grains
• ISO 521:2011 Machine chucking reamers with cylindrical shanks and Morse taper shanks
• ISO 522:1975 Special tolerances for reamers
• ISO 523:1974 Milling cutters — Recommended range of outside diameters [Withdrawn without replacement]
• ISO/R 524:1966 Hard metal wire drawing dies — Interchangeability dimensions of pellets and cases [Withdrawn without replacement]
• ISO 525:2020 Bonded abrasive products — Shape types, designation and marking
• ISO/R 526:1966 Significance to purchasers of marks indicating conformitity with standards [Withdrawn without replacement]
• ISO 527 Plastics — Determination of tensile properties
  • ISO 527-1:2019 Part 1: General principles
  • ISO 527-2:2012 Part 2: Test conditions for moulding and extrusion plastics
  • ISO 527-3:2018 Part 3: Test conditions for films and sheets
  • ISO 527-4:2021 Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
  • ISO 527-5:2009 Part 5: Test conditions for unidirectional fibre-reinforced plastic composites
• ISO 528:1983 Refractory products — Determination of pyrometric cone equivalent (refractoriness)
• ISO 529:2017 Short machine taps and hand taps
• ISO 530:1975 Aircraft — General purpose push-pull single-pole circuit-breakers — Dimensions
• ISO/R 531:1966 Cast iron sanitary pipes and fittings for waste water and ventilation [Withdrawn without replacement]
• ISO 532 Acoustics — Methods for calculating loudness
  • ISO 532-1:2017 Part 1: Zwicker method
  • ISO 532-2:2017 Part 2: Moore-Glasberg method
• ISO/R 533:1966 Rolling bearings — Double row cylindrical roller bearings type with tapered bore 1:12 [Withdrawn without replacement]
• ISO 534:2011 Paper and board — Determination of thickness, density and specific volume
• ISO 535:2014 Paper and board — Determination of water absorptiveness — Cobb method
• ISO 536:2019 Paper and board — Determination of grammage
• ISO 537:1989 Plastics — Testing with the torsion pendulum [Withdrawn: replaced with ISO 6721-1, ISO 6721-2, ISO 6721-4, and ISO 6721-10]
• ISO/R 538:1967 Conventional signs to be used in the schemes for the installations of pipeline systems in ships [Withdrawn without replacement]
• ISO/R 539:1967 Acoustics — Dimensions and conductor resistance of heat-resisting (260°C) electrical cables with copper conductors [Withdrawn without replacement]
• ISO 540:2008 Hard coal and coke — Determination of ash fusibility
• ISO/R 541:1967 Measurement of fluid flow by means of orifice plates and nozzles [Withdrawn: replaced with ISO 5167, later ISO 5167-1]
• ISO 542:1990 Oilseeds — Sampling
• ISO 543:1990 Photography — Photographic films — Specifications for safety film [Withdrawn: replaced with ISO 18906]
• ISO 544:2017 Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings
• ISO 545:1975 Filler rods, other than drawn or extruded, for welding — Lengths and tolerance [Withdrawn: replaced with ISO 544]
• ISO 546:1975 Drawn or extruded filler rods for welding, supplied in straight lengths — Lengths and tolerance [Withdrawn: replaced with ISO 544]
• ISO 547:1975 Electrodes for the welding of mild steel and low alloy high tensile steel — Lengths and tolerance [Withdrawn: replaced with ISO 544]
• ISO 548:1981 Manganese ores — Determination of barium oxide content — Barium sulphate gravimetric method
• ISO 549:1981 Manganese ores — Determination of combined water content — Gravimetric method
• ISO 550:1981 Manganese ores — Determination of titanium content [Withdrawn: replaced with ISO 7723]
• ISO 551:1975 Manganese ores — Determination of zinc content — Zinc mercurithyocyanate gravimetric method [Withdrawn without replacement]
• ISO 552:1975 Manganese ores and concentrates — Determination of calcium and magnesium contents [Withdrawn: replaced with ISO 6233]
• ISO 553:1981 Manganese ores — Determination of vanadium content — Titrimetric method and phosphotungstovanadate photometric method [Withdrawn without replacement]
• ISO 554:1976 Standard atmospheres for conditioning and/or testing — Specifications
• ISO 555 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow
  • ISO 555-1:1973 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 1: Constant-rate injection method [Withdrawn without replacement]
  • ISO 555-2:1987 Liquid flow measurement in open channels — Dilution methods for the measurement of steady flow — Part 2: Integration method [Withdrawn without replacement]
• ISO 556:2020 Coke (greater than 20 mm in size) — Determination of mechanical strength
• ISO/R 557:1967 Safety Signs [Withdrawn: replaced with ISO 3864-1]
• ISO 558:1980 Conditioning and testing — Standard atmospheres — Definitions
• ISO 559:1991 Steel tubes for water and sewage [Withdrawn without replacement]
• ISO 560:1975 Cold drawn precision steel tubes — Metric series — Dimensions and masses per metre [Withdrawn: replaced with ISO 4200]
• ISO 561:1989 Coal preparation plant — Graphical symbols
• ISO 562:2010 Hard coal and coke — Determination of volatile matter
• ISO 563:1981 Equipment for harvesting — Knife sections for agricultural cutter bars [Withdrawn without replacement]
• ISO/R 564:1967 Aerospace — Preformed flexible steel wire rope for aircraft controls — Dimensions and loads [Withdrawn: replaced with ISO 2020, later ISO 2020-1]
• ISO 565:1990 Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
• ISO/R 566:1967 Pesticides — Common names — Sixth series of terms [Withdrawn: replaced with ISO 1750]
• ISO 567:1995 Coke — Determination of bulk density in a small container
• ISO 568:1976 Textile machinery and accessories — Heald frames for single or double row of healds — Designation of dimensions [Withdrawn: replaced with ISO 10787-1 and ISO 10787-2]
• ISO 569:1982 Textile machinery and accessories — Heald frames — Co-ordinated dimensions in relation to the pitch of the harness [Withdrawn: replaced with ISO 10787-1 and ISO 10787-2]
• ISO 570:1982 Textile machinery and accessories — Heald carrying rods for healds with closed "O"-shaped end loops
• ISO 571:1976 Textile machinery and accessories — Metal reeds with double-spring baulk — Dimensions [Withdrawn: Replaced with ISO 366-3]
• ISO 572:1976 Textile machinery and accessories — Shuttles for pirn changing automatic looms — Dimensions [Withdrawn without replacement]
• ISO 573:1976 Textile machinery and accessories — Dobby lags and pegs in wood, metal or other suitable material — Dimensions [Withdrawn without replacement]
• ISO 574:1979 Textile machinery and accessories — Perforated cylindrical tubes for cheese dyeing [Withdrawn: Replaced with ISO 3914-7]
• ISO 575:1978 Textile machinery and accessories — Transfer cones — Half angle of the cone 4 degrees 20' [Withdrawn without replacement]
• ISO 576:1976 Textile machinery and accessories — Paper patterns for dobbies — Dimensions [Withdrawn without replacement]
• ISO/R 577 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances
  • ISO/R 577-1:1967 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 1: Normal tolerances [Withdrawn: Replaced with ISO 492]
  • ISO/R 577-2:1968 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 2: Tolerances classes 6 and 5 [Withdrawn: Replaced with ISO 492]
  • ISO 577-3:1973 Rolling bearings — Tapered rolling bearings — Metric series — Tolerances — Part 3: Tolerances classes 4 [Withdrawn: Replaced with ISO 492]
• ISO 578:1987 Tapered roller bearings — Inch series — Tolerances [Withdrawn without replacement]
• ISO 579:2013 Coke — Determination of total moisture
• ISO 580:2005 Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
• ISO/TR 581:2005 Weldability — Metallic materials — General principles
• ISO 582:1995 Rolling bearings — Chamfer dimensions — Maximum values
• ISO 583:2007 Conveyor belts with a textile carcass — Total belt thickness and thickness of constitutive elements — Test methods
• ISO 584:1982 Plastics — Unsaturated polyester resins — Determination of reactivity at 80 degrees C (conventional method)
• ISO 585:1990 Plastics — Unplasticized cellulose acetate — Determination of moisture content
• ISO/R 586:1967 Coke — Determination of ash [Withdrawn: replaced with ISO 1171]
• ISO 587:2020 Coal and coke — Determination of chlorine using Eschka mixture
• ISO/R 588 was incorporated into ISO/R 862^[3]
• ISO 589:2008 Hard coal — Determination of total moisture
• ISO 590:1981 Oil of brazilian sassafras [Withdrawn without replacement]
• ISO 591 Titanium dioxide pigments for paints
  • ISO 591-1:2000 Part 1: Specifications and methods of test
• ISO 592:1998 Essential oils — Determination of optical rotation
• ISO 593:1974 Paper — Untrimmed stock sizes for the ISO-A Series — ISO supplementary range [Withdrawn: replaced with ISO 217]
• ISO 594 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment
  • ISO 594-1:1986 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 1: General requirements [Withdrawn: replaced with ISO 80369-7]
  • ISO 594-2:1998 Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings [Withdrawn: replaced with ISO 80369-7]
• ISO 595 Reusable all-glass or metal-and-glass syringes for medical use [Withdrawn without replacement]
  • ISO 595-1:1986 Reusable all-glass or metal-and-glass syringes for medical use — Part 1: Dimensions [Withdrawn without replacement]
  • ISO 595-2:1987 Reusable all-glass or metal-and-glass syringes for medical use — Part 2: Design, performance requirements and tests [Withdrawn without replacement]
• ISO/R 596:1967 Hypodermic needles [Withdrawn without replacement]
• ISO/R 597:1967 Definitions and terminology of cements [Withdrawn without replacement]
• ISO/R 598:1967 Fundamental welding positions — Definitions and values of angles of slope and rotation for fillet welds for these positions [Withdrawn: replaced by ISO 6947]
• ISO 599:1985 Plastics — Polyamide homopolymers — Determination of matter extractable by boiling methanol [Withdrawn: replaced by ISO 6427]
• ISO/R 600:1967 Plastics — Polyamide homopolymers — Determination of the viscosity ratio in concentrated solution [Withdrawn without replacement]
• ISO 601:1981 Solid mineral fuels — Determination of arsenic content using the standard silver diethyldithiocarbamate photometric method of ISO 2590 [Withdrawn without replacement]
• ISO 602:2015 Coal — Determination of mineral matter
• ISO 603 Bonded abrasive products — Dimensions
  • ISO 603-1:1999 Part 1: Grinding wheels for external cylindrical grinding between centres
  • ISO 603-2:1999 Part 2: Grinding wheels for centreless external cylindrical grinding
  • ISO 603-3:1999 Part 3: Grinding wheels for internal cylindrical grinding
  • ISO 603-4:1999 Part 4: Grinding wheels for surface grinding/peripheral grinding
  • ISO 603-5:1999 Part 5: Grinding wheels for surface grinding/face grinding
  • ISO 603-6:1999 Part 6: Grinding wheels for tool and tool room grinding
  • ISO 603-7:1999 Part 7: Grinding wheels for manually guided grinding
  • ISO 603-8:1999 Part 8: Grinding wheels for deburring and fettling/snagging
  • ISO 603-9:1999 Part 9: Grinding wheels for high-pressure grinding
  • ISO 603-10:1999 Part 10: Stones for honing and superfinishings
  • ISO 603-11:1999 Part 11: Hand finishing sticks
  • ISO 603-12:1999 Part 12: Grinding wheels for deburring and fettling on a straight grinder
  • ISO 603-13:1999 Part 13: Grinding wheels for deburring and fettling on a vertical grinder
  • ISO 603-14:1999 Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder
  • ISO 603-15:1999 Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines
  • ISO 603-16:1999 Part 16: Grinding wheels for cutting-off on hand held power tools
  • ISO 603-17:2014 Part 17: Spindle mounted wheels (ISO type 52)
  • ISO 603-18:2013 Part 18: Grinding wheels for flat glass edge grinding machines
• ISO 604:2002 Plastics — Determination of compressive properties
• ISO 605:1991 Pulses — Determination of impurities, size, foreign odours, insects, and species and variety — Test methods
• ISO 606:2015 Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets
• ISO 607:1980 Surface active agents and detergents — Methods of sample division
• ISO/R 608:1967 Classical V-belts — Lengths (sections A, B, C, D, and E) [Withdrawn: replaced with ISO 4184]
• ISO 609:1996 Solid mineral fuels — Determination of carbon and hydrogen — High temperature combustion method
• ISO 610:1990 High-tensile steel chains (round link) for chain conveyors and coal ploughs
• ISO 611:2003 Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary
• ISO 612:1978 Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
• ISO 613:2000 Ships and marine technology — Magnetic compasses, binnacles and azimuth reading devices — Class B [Withdrawn: replaced by ISO 25862]
• ISO 614:2012 Ships and marine technology — Toughened safety glass panes for rectangular windows and side scuttles — Punch method of non-destructive strength testing
• ISO/R 615:1967 Methods for determining the mechanical properties of the weld metal deposited by electrodes 3,15 mm or more in diameter [Withdrawn without replacement]
• ISO 616:1995 Coke — Determination of shatter indices
• ISO/R 617:1967 Calculation of rectangular symmetrical fillet welds statically loaded in such a way that the transverse section is not under any normal stress [Withdrawn without replacement]
• ISO 618:1974 Paper — Articles of stationery that include detachable sheets — Overall trimmed sizes [Withdrawn without replacement]
• ISO 619:1981 Manganese ores — Determination of chromium content — Diphenylcarbazide photometric method and silver persulphate titrimetric method
• ISO 620:1975 Manganese ores — Determination of zinc content — Polarographic method (zinc content between 0,005 and 0,1 %) [Withdrawn without replacement]
• ISO 621:1981 Manganese ores — Determination of metallic iron content (metallic iron content not exceeding 2 %) — Sulphosalicylic acid photometric method [Withdrawn without replacement]
• ISO 622:2016 Solid mineral fuels — Determination of phosphorus content — Reduced molybdophosphate photometric method
• ISO 623:1974 Paper and board — Folders and files — Sizes [Withdrawn without replacement]
• ISO 624:1974 Pulps — Determination of dichloromethane soluble matter [Withdrawn: replaced with ISO 14453]
• ISO 625:1996 Solid mineral fuels — Determination of carbon and hydrogen — Liebig method
• ISO/R 626:1967 Strength calculation of butt welded joints [Withdrawn without replacement]
• ISO/R 627:1967 Fundamental welding positions — Definitions and values of angles of slope and rotation for butt welds for these positions [Withdrawn: replaced by ISO 6947]
• ISO/R 628:1967 Pesticides — Common names — Seventh series of terms [Withdrawn: replaced with ISO 1750]
• ISO 629:1982 Steel and cast iron — Determination of manganese content — Spectrophotometric method
• ISO 630 Structural steels
  • ISO 630-1:2011 Part 1: General technical delivery conditions for hot-rolled products
  • ISO 630-2:2011 Part 2: Technical delivery conditions for structural steels for general purposes
  • ISO 630-3:2012 Part 3: Technical delivery conditions for fine-grain structural steels
  • ISO 630-4:2012 Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates
  • ISO 630-5:2014 Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
  • ISO 630-6:2014 Part 6: Technical delivery conditions for seismic-improved structural steels for building
• ISO 631:1975 Mosaic parquet panels — General characteristics
• ISO/R 632:1967 Methods of test for determining whether an electrode is a deep penetration electrode [Withdrawn without replacement]
• ISO 633:2019 Cork — Vocabulary
• ISO/R 634:1967 Aircraft — Methods of test for general purpose electrical cables with copper conductors [Withdrawn without replacement]
• ISO/R 635:1967 Welding consumables — Code of symbols for covered electrodes for arc welding of mild steels and low alloy high tensile steels [Withdrawn without replacement]
• ISO 636:2017 Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
• ISO 637:1975 Filler rods for gas welding of mild steels and low alloy high tensile steels — Determination of mechanical properties of deposited weld metal [Withdrawn without replacement]
• ISO 638 Paper, board, pulps and cellulosic nanomaterials — Determination of dry matter content by oven-drying method
  • ISO 638-1:2021 Part 1: Materials in solid form
  • ISO 638-2:2021 Part 2: Suspensions of cellulosic nanomaterials
• ISO 639 Codes for the representation of names of languages
  • ISO 639-1:2002 Part 1: Alpha-2 code
  • ISO 639-2:1998 Part 2: Alpha-3 code
  • ISO 639-3:2007 Part 3: Alpha-3 code for comprehensive coverage of languages
  • ISO 639-4:2010 Part 4: General principles of coding of the representation of names of languages and related entities, and application guidelines
  • ISO 639-5:2008 Part 5: Alpha-3 code for language families and groups
  • ISO 639-6:2009 Part 6: Alpha-4 code for comprehensive coverage of language variants [Withdrawn, no replacement]
• ISO 640:1984 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Vickers hardness testing machines HV 0,2 to HV 100 [Withdrawn: replaced with ISO 6507-3]
  • ISO 640-2:1993 Metallic materials — Calibration of standardized blocks to be used for Vickers hardness testing machines — Part 2: Less than HV 0,2 [Withdrawn: replaced with ISO 6507-3]
• ISO 641:1975 Laboratory glassware — Interchangeable spherical ground joints
• ISO 642:1999 Steel — Hardenability test by end quenching (Jominy test)
• ISO 643:2019 Steels — Micrographic determination of the apparent grain size
• ISO/R 644:1967 Conventional signs to be used in schemes for the installations of ventilation systems in ships [Withdrawn without replacement]
• ISO/R 645:1967 Statistics — Vocabulary and symbols — First series [Withdrawn: replaced with ISO 3534]
• ISO/IEC 646:1991 Information technology — ISO 7-bit coded character set for information interchange
• ISO 647:2017 Brown coals and lignites — Determination of the yields of tar, water, gas and coke residue by low temperature distillation
• ISO 648:2008 Laboratory glassware — Single-volume pipettes
• ISO 649 Laboratory glassware — Density hydrometers for general purposes
  • ISO 649-1:1981 Part 1: Specification
  • ISO 649-2:1981 Part 2: Test methods and use
• ISO 650:1977 Relative density 60/60 degrees F hydrometers for general purposes
• ISO 651:1975 Solid-stem calorimeter thermometers
• ISO 652:1975 Enclosed-scale calorimeter thermometers
• ISO 653:1980 Long solid-stem thermometers for precision use
• ISO 654:1980 Short solid-stem thermometers for precision use
• ISO 655:1980 Long enclosed-scale thermometers for precision use
• ISO 656:1980 Short enclosed-scale thermometers for precision use
• ISO 657 Hot-rolled steel sections
• ISO 658:2002 Oilseeds — Determination of content of impurities
• ISO 659:2009 Oilseeds — Determination of oil content (Reference method)
• ISO 660:2020 Animal and vegetable fats and oils — Determination of acid value and acidity
• ISO 661:2003 Animal and vegetable fats and oils — Preparation of test sample
• ISO 662:2016 Animal and vegetable fats and oils — Determination of moisture and volatile matter content
• ISO 663:2017 Animal and vegetable fats and oils — Determination of insoluble impurities content
• ISO 664:2008 Oilseeds — Reduction of laboratory sample to test sample
• ISO 665:2020 Oilseeds — Determination of moisture and volatile matter content
• ISO 666:2012 Machine tools — Mounting of grinding wheels by means of hub flanges
• ISO 667:1981 Rubber, compounded — Determination of cure rate — Shearing disk method [Withdrawn: replaced with ISO 289-2]
• ISO 668:2020 Series 1 freight containers — Classification, dimensions and ratings
• ISO 669:2016 Resistance welding — Resistance welding equipment — Mechanical and electrical requirements
• ISO/R 670:1968 Straight resistance spot welding electrodes — Mechanical and electrical requirements [Withdrawn: replaced with ISO 5184]
• ISO 671:1982 Steel and cast iron — Determination of sulphur content — Combustion titrimetric method
• ISO 672:1978 Soaps — Determination of moisture and volatile matter content — Oven method
• ISO 673:1981 Soaps — Determination of content of ethanol-insoluble matter
• ISO 674:1988 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) [Withdrawn: replaced with ISO 6508-3]
• ISO 675:2014 Textiles — Woven fabrics — Determination of dimensional change on commercial laundering near the boiling point
• ISO 676:1995 Spices and condiments — Botanical nomenclature
• ISO 677:1976 Straight bevel gears for general engineering and heavy engineering — Basic rack
• ISO 678:1976 Straight bevel gears for general engineering and heavy engineering — Modules and diametral pitches
• ISO 679:2009 Cement — Test methods — Determination of strength
• ISO 680:1990 Cement — Test methods — Chemical analysis [Withdrawn: replaced with ISO 29581-1]
• ISO/R 681:1968 Chemical analysis of cements — Minor constituents of Portland cement [Withdrawn without replacement]
• ISO/R 682:1968 Chemical analysis of cements — Determination of sulphur as sulphide [Withdrawn without replacement]
• ISO 683 Heat-treatable steels, alloy steels and free-cutting steels
  • ISO 683-1:2016 Part 1: Non-alloy steels for quenching and tempering
  • ISO 683-2:2016 Part 2: Alloy steels for quenching and tempering
  • ISO 683-3:2022 Part 3: Case-hardening steels
  • ISO 683-4:2016 Part 4: Free-cutting steels
  • ISO 683-5:2017 Part 5: Nitriding steels
  • ISO 683-14:2004 Part 14: Hot-rolled steels for quenched and tempered springs
  • ISO 683-15:1992 Part 15: Valve steels for internal combustion engines
  • ISO 683-17:2014 Part 17: Ball and roller bearing steels
  • ISO 683-18:2014 Part 18: Bright steel products
• ISO 684:1974 Analysis of soaps — Determination of total free alkali
• ISO 685:2020 Analysis of soaps — Determination of total alkali content and total fatty matter content
• ISO 686:1985 Photography — 35 mm filmstrips — Specifications for double-frame and single-frame formats [Withdrawn without replacement]
• ISO 687:2010 Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample
• ISO 688:1975 Filler rods for braze welding — Determination of characteristics of deposited metal [Withdrawn without replacement]
• ISO 689:1975 Microcopying — ISO micromire — Description and use for checking a reading apparatus [Withdrawn without replacement]
• ISO 690:2010 Information and documentation — Guidelines for bibliographic references and citations to information resources
• ISO 691:2005 Assembly tools for screws and nuts — Wrench and socket openings — Tolerances for general use
• ISO 692:1982 Pulps — Determination of alkali solubility
• ISO 693:1982 Dimensions of seam welding wheel blanks
• ISO 694:2000 Ships and marine technology — Positioning of magnetic compasses in ships [Withdrawn: replaced by ISO 25862]
• ISO 695:1991 Glass — Resistance to attack by a boiling aqueous solution of mixed alkali — Method of test and classification
• ISO 696:1975 Surface active agents — Measurement of foaming power — Modified Ross-Miles method
• ISO 697:1981 Surface active agents — Washing powders — Determination of apparent density — Method by measuring the mass of a given volume
• ISO 698:1975 Filler rods for braze welding — Determination of conventional bond strength on steel, cast iron and other metals [Withdrawn without replacement]
• ISO 699:2015 Pulps — Determination of alkali resistance

ISO 700 – ISO 999[]

• ISO 700:1982 Power sources for manual metal arc welding with covered electrodes and for the TIG process [Withdrawn: replaced by IEC 60974-1:1998, now withdrawn without replacement]
• ISO 701:1998 International gear notation — Symbols for geometrical data
• ISO 702 Machine tools — Connecting dimensions of spindle noses and work holding chucks
  • ISO 702-1:2009 Part 1: Conical connection
  • ISO 702-2:2007 Part 2: Camlock type
  • ISO 702-3:2007 Part 3: Bayonet type
  • ISO 702-4:2004 Part 4: Cylindrical connection
• ISO 703:2017 Conveyor belts — Transverse flexibility (troughability) — Test method
• ISO 704:2009 Terminology work — Principles and methods
• ISO 705:2015 Rubber latex — Determination of density between 5 degrees C and 40 degrees C
• ISO 706:2004 Rubber latex — Determination of coagulum content (sieve residue)
• ISO 707:2008 Milk and milk products — Guidance on sampling
• ISO/R 708:1968 Filler rods for gas welding — Test to determine the compatibility of steel filler rods and the parent metal in the welding of steels [Withdrawn without replacement]
• ISO 709:2001 Essential oils — Determination of ester value
• ISO 710 Graphical symbols for use on detailed maps, plans and geological cross-sections
  • ISO 710-1:1974 Part 1: General rules of representation
  • ISO 710-2:1974 Part 2: Representation of sedimentary rocks
  • ISO 710-3:1974 Part 3: Representation of magmatic rocks
  • ISO 710-4:1982 Part 4: Representation of metamorphic rocks
  • ISO 710-5:1989 Part 5: Representation of minerals
  • ISO 710-6:1984 Part 6: Representation of contact rocks and rocks which have undergone metasomatic, pneumatolytic or hydrothermal transformation or transformation by weathering
  • ISO 710-7:1984 Part 7: Tectonic symbols
• ISO 711:1985 Cereals and cereal products — Determination of moisture content (Basic reference method) [Withdrawn without replacement]
• ISO 712:2009 Cereals and cereal products — Determination of moisture content — Reference method
• ISO 713:1975 Zinc — Determination of lead and cadmium contents — Polarographic method [Withdrawn without replacement]
• ISO 714:1975 Zinc — Determination of iron content — Photometric method
• ISO 715:1975 Zinc — Determination of lead content — Polarographic method [Withdrawn without replacement]
• ISO 716:1986 Metallic materials — Hardness test — Verification of Rockwell hardness testing machines (scales A - B - C - D - E - F - G - H - K) [Withdrawn: replaced with ISO 6508-2]
• ISO 717 Acoustics — Rating of sound insulation in buildings and of building elements
  • ISO 717-1:2020 Part 1: Airborne sound insulation
  • ISO 717-2:2020 Part 2: Impact sound insulation
• ISO 718:1990 Laboratory glassware — Thermal shock and thermal shock endurance — Test methods
• ISO 719:2020 Glass — Hydrolytic resistance of glass grains at 98 °C — Method of test and classification
• ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
• ISO 721:1991 Rock drilling equipment — Integral stems
• ISO 722:1991 Rock drilling equipment — Hollow drill steels in bar form, hexagonal and round
• ISO 723:1991 Rock drilling equipment — Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
• ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
• ISO 725:2009 ISO inch screw threads — Basic dimensions
• ISO 726:1982 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Brinell hardness testing machines [Withdrawn: replaced with ISO 6506-3]
• ISO 727 Fittings made from unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) with plain sockets for pipes under pressure
  • ISO 727-1:2002 Part 1: Metric series
  • ISO 727-2:2005 Part 2: Inch-based series
• ISO 728:2021 Coke — Size analysis by sieving
• ISO 729:1988 Oilseeds — Determination of acidity of oils
• ISO 730:2009 Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4
• ISO 731 Formic acid for industrial use — Methods of test
  • ISO 731-1:1977 Formic acid for industrial use — Methods of test — Part 1: General [Withdrawn without replacement]
  • ISO 731-2:1977 Formic acid for industrial use — Methods of test — Part 2: Determination of total acidity — Titrimetric method [Withdrawn without replacement]
  • ISO 731-3:1977 Formic acid for industrial use — Methods of test — Part 3: Determination of content of other acids — Potentiometric method [Withdrawn without replacement]
  • ISO 731-4:1977 Formic acid for industrial use — Methods of test — Part 4: Visual limit test for inorganic chlorides [Withdrawn without replacement]
  • ISO 731-5:1977 Formic acid for industrial use — Methods of test — Part 5: Visual limit test for inorganic sulphates [Withdrawn without replacement]
  • ISO 731-6:1977 Formic acid for industrial use — Methods of test — Part 6: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
  • ISO 731-7:1977 Formic acid for industrial use — Methods of test — Part 7: Determination of low contents of other volatile acids — Titrimetric method after distillation [Withdrawn without replacement]
• ISO 732:2000 Photography — 120-size and 220-size films — Dimensions
• ISO/R 733:1968 Hexagon bolts and nuts — Metric series — Tolerances on widths across flats, widths across corners [Withdrawn: replaced with ISO 4759-1]
• ISO 734:2015 Oilseed meals — Determination of oil content — Extraction method with hexane (or light petroleum)
• ISO 735:1977 Oilseed residues — Determination of ash insoluble in hydrochloric acid
• ISO 736:1977 Oilseed residues — Determination of diethyl ether extract [Withdrawn without replacement]
• ISO 737:1975 Coniferous sawn timber — Sizes — Methods of measurement
• ISO 738:2015 Coniferous sawn timber — Sizes — Permissible deviations and shrinkage [Withdrawn without replacement]
• ISO 739:1976 Sodium carbonate for industrial use — Preparation and storage of test samples
• ISO 740:1976 Sodium carbonate for industrial use — Determination of total soluble alkalinity — Titrimetric method
• ISO 741:1976 Sodium carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method [Withdrawn without replacement]
• ISO 742:1973 Sodium carbonate for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
• ISO 743:1976 Sodium carbonate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method
• ISO/R 744:1968 Sodium carbonate for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
• ISO 745:1976 Sodium carbonate for industrial use — Determination of loss of mass and of non-volatile matter at 250 degrees C [Withdrawn without replacement]
• ISO 746:1976 Sodium carbonate for industrial use — Determination of matter insoluble in water at 50 degrees C
• ISO/R 747:1968 Sodium carbonate for industrial use — Expression of test results [Withdrawn without replacement]
• ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels using current-meters or floats — Velocity area methods using point velocity measurements
• ISO 749:1977 Oilseed residues — Determination of total ash
• ISO 750:1998 Fruit and vegetable products — Determination of titratable acidity
• ISO 751:1998 Fruit and vegetable products — Determination of water-insoluble solids
• ISO 752:2004 Zinc ingots
• ISO 753 Acetic acid for industrial use — Methods of test
  • ISO 753-1:1981 Part 1: General [Withdrawn without replacement]
  • ISO 753-2:1981 Part 2: Determination of acetic acid content — Titrimetric method [Withdrawn without replacement]
  • ISO 753-3:1981 Part 3: Determination of formic acid content — Iodometric method [Withdrawn without replacement]
  • ISO 753-4:1981 Part 4: Determination of acetaldehyde monomer content — Titrimetric method [Withdrawn without replacement]
  • ISO 753-5:1981 Part 5: Determination of total acetaldehyde content — Titrimetric method [Withdrawn without replacement]
  • ISO 753-6:1981 Part 6: Determination of permanganate index [Withdrawn without replacement]
  • ISO 753-7:1981 Part 7: Determination of dichromate index [Withdrawn without replacement]
  • ISO 753-8:1981 Part 8: Visual limit test for inorganic chlorides [Withdrawn without replacement]
  • ISO 753-9:1981 Part 9: Visual limit test for inorganic sulphates [Withdrawn without replacement]
  • ISO 753-10:1981 Part 10: Visual limit test for heavy metals (including iron) [Withdrawn without replacement]
• ISO 754:1982 Acetic anhydride for industrial use — Methods of test [Withdrawn without replacement]
• ISO 755 Butan-1-ol for industrial use — Methods of test
  • ISO 755-1:1981 Part 1: General [Withdrawn without replacement]
  • ISO 755-2:1981 Part 2: Determination of acidity — Titrimetric method [Withdrawn without replacement]
  • ISO 755-3:1981 Part 3: Sulphuric acid colour test [Withdrawn without replacement]
• ISO 756 Propan-2-ol for industrial use — Methods of test
  • ISO 756-1:1981 Part 1: General
  • ISO 756-2:1981 Part 2: Determination of acidity — Titrimetric method [Withdrawn without replacement]
  • ISO 756-3:1981 Part 3: Test for miscibility with water [Withdrawn without replacement]
• ISO 757 Acetone for industrial use — Methods of test
  • ISO 757-1:1982 Part 1: General [Withdrawn without replacement]
  • ISO 757-2:1982 Part 2: Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn without replacement]
  • ISO 757-3:1982 Part 3: Test for miscibility with water [Withdrawn without replacement]
  • ISO 757-4:1983 Part 4: Determination of permanganate time [Withdrawn without replacement]
  • ISO 757-5:1982 Part 5: Control test with Agulhon's reagent [Withdrawn without replacement]
• ISO 758:1976 Liquid chemical products for industrial use — Determination of density at 20 degrees C
• ISO 759:1981 Volatile organic liquids for industrial use — Determination of dry residue after evaporation on water bath — General method
• ISO 760:1978 Determination of water — Karl Fischer method (General method)
• ISO 761:1977 Acetic anhydride and butan-1-ol for industrial use — Determination of bromine number [Withdrawn without replacement]
• ISO 762:2003 Fruit and vegetable products — Determination of mineral impurities content
• ISO 763:2003 Fruit and vegetable products — Determination of ash insoluble in hydrochloric acid
• ISO 764:2020 Horology — Magnetic resistant watches
• ISO 765:2016 Pesticides considered not to require common names
• ISO 766:1972 Fibre building boards — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424]
• ISO 767:1975 Fibre building boards — Determination of moisture content [Withdrawn: replaced with ISO 9425]
• ISO 768:1972 Fibre building boards — Determination of bending strength [Withdrawn without replacement]
• ISO 769:1972 Fibre building boards — Hard and medium boards — Determination of water absorption and of swelling in thickness after immersion in water [Withdrawn without replacement]
• ISO 770:2002 Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulus Labill.)
• ISO 771:1977 Oilseed residues — Determination of moisture and volatile matter content
• ISO 772:2011 Hydrometry — Vocabulary and symbols
• ISO/R 773:1969 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
• ISO/R 774:1969 Taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
• ISO/R 775:1969 Cylindrical and 1/10 conical shaft ends [Withdrawn without replacement]
• ISO 776:2011 Pulps — Determination of acid-insoluble ash
• ISO 777:2005 Paper, board and pulp — Determination of acid-soluble calcium [Withdrawn: replaced with ISO 12830]
• ISO 778:2005 Paper, board and pulp — Determination of acid-soluble copper [Withdrawn: replaced with ISO 12830]
• ISO 779:2005 Paper, board and pulp — Determination of acid-soluble iron [Withdrawn: replaced with ISO 12830]
• ISO 780:2015 Packaging – Distribution packaging — Graphical symbols for handling and storage of packages
• ISO/R 781:1968 Measurement of fluid flow by means of Venturi tubes inserted in circular cross-section conduits running full [Withdrawn: replaced with ISO 5167, later ISO 5167-1]
• ISO 782:1975 Microcopying — Measurement of screen luminance of microfilm readers [Withdrawn without replacement, but later restored as ISO 7565]
• ISO 783:1999 Metallic materials — Tensile testing at elevated temperature [Withdrawn: replaced with ISO 6892-2]
• ISO/R 784:1968 Conventional signs to be used in schemes for the installations of sanitary systems in ships [Withdrawn without replacement]
• ISO/R 785:1968 Pesticides — Common names — Eighth series of terms [Withdrawn: replaced with ISO 1750]
• ISO/R 786:1968 Units and symbols for refrigeration [Withdrawn without replacement]
• ISO 787 General methods of test for pigments and extenders
  • ISO 787-1:1982 Part 1: Comparison of colour of pigments
  • ISO 787-2:1981 Part 2: Determination of matter volatile at 105 degrees C
  • ISO 787-3:2000 Part 3: Determination of matter soluble in water — Hot extraction method
  • ISO 787-4:1981 Part 4: Determination of acidity or alkalinity of the aqueous extract
  • ISO 787-5:1980 Part 5: Determination of oil absorption value
  • ISO 787-7:2009 Part 7: Determination of residue on sieve — Water method — Manual procedure
  • ISO 787-8:2000 Part 8: Determination of matter soluble in water — Cold extraction method
  • ISO 787-9:2019 Part 9: Determination of pH value of an aqueous suspension
  • ISO 787-10:1993 Part 10: Determination of density — Pyknometer method
  • ISO 787-11:1981 Part 11: Determination of tamped volume and apparent density after tamping
  • ISO/R 787-12:1970 Part 12: Determination of [Withdrawn without replacement]
  • ISO 787-13:2019 Part 13: Determination of water-soluble sulphates, chlorides and nitrates
  • ISO 787-14:2019 Part 14: Determination of resistivity of aqueous extract
  • ISO 787-15:2019 Part 15: Comparison of resistance to light of coloured pigments of similar types
  • ISO 787-16:1986 Part 16: Determination of relative tinting strength (or equivalent colouring value) and colour on reduction of coloured pigments — Visual comparison method
  • ISO 787-17:2019 Part 17: Comparison of lightening power of white pigments
  • ISO 787-18:1983 Part 18: Determination of residue on sieve — Mechanical flushing procedure
  • ISO 787-19:2020 Part 19: Determination of water-soluble nitrates (Salicylic acid method)
  • ISO 787-20:1979 Part 20: Comparison of ease of dispersion (Oscillatory shaking method) [Withdrawn: replaced with ISO 8780-2]
  • ISO 787-21:1979 Part 21: Comparison of heat stability of pigments using a stoving medium
  • ISO 787-22:1980 Part 22: Comparison of resistance to bleeding of pigments
  • ISO 787-23:1979 Part 23: Determination of density (using a centrifuge to remove entrained air)
  • ISO 787-24:1985 Part 24: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments — Photometric methods
  • ISO 787-25:2019 Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method
  • ISO 787-28:2019 Part 28: Determination of total content of polychlorinated biphenyls (PCB) by dissolution, cleanup and GC-MS
• ISO 788:2021 Ultramarine pigments
• ISO 789 Agricultural tractors — Test procedures
  • ISO 789-1:2018 Part 1: Power tests for power take-off
  • ISO 789-2:2018 Part 2: Rear three-point linkage lifting capacity
  • ISO 789-3:2015 Part 3: Turning and clearance diameters
  • ISO 789-4:1986 Part 4: Measurement of exhaust smoke
  • ISO 789-5:1983 Part 5: Partial power PTO — Non-mechanically transmitted power
  • ISO 789-6:2019 Part 6: Centre of gravity
  • ISO 789-7:1991 Part 7: Axle power determination
  • ISO 789-8:1991 Part 8: Engine air cleaner
  • ISO 789-9:2018 Part 9: Power tests for drawbar
  • ISO/OECD 789-10:2006 Part 10: Hydraulic power at tractor/implement interface
  • ISO 789-11:1996 Part 11: Steering capability of wheeled tractors
  • ISO 789-12:2000 Part 12: Low temperature starting
  • ISO 789-13:2018 Part 13: Vocabulary and specimen test report
• ISO 790:1973 Freight containers — Coding and identification [Withdrawn: replaced with ISO 6346]
• ISO 791:1973 Magnesium alloys — Determination of aluminium — 8-hydroxyquinoline gravimetric method
• ISO 792:1973 Magnesium and magnesium alloys — Determination of iron — Orthophenanthroline photometric method
• ISO 793:1973 Aluminium and aluminium alloys — Determination of iron — Orthophenanthroline photometric method
• ISO 794:1976 Magnesium and magnesium alloys — Determination of copper content — Oxalyldihydrazide photometric method
• ISO 795:1976 Aluminium and aluminium alloys — Determination of copper content — Oxalyldihydrazide photometric method
• ISO 796:1973 Aluminium alloys — Determination of copper — Electrolytic method
• ISO 797:1973 Aluminium and aluminium alloys — Determination of silicon — Gravimetric method
• ISO/R 798:1968 Chemical analysis of aluminium and its alloys — Gravimetric determination of zinc in aluminium alloys (zinc content between 0.50 and 6.5 %) [Withdrawn: replaced with ISO 1784]
• ISO 799 Ships and marine technology — Pilot ladders
  • ISO 799-1:2019 Part 1: Design and specification
• ISO 800:1992 Plastics — Phenolic moulding materials — Specification [Withdrawn: replaced with ISO 14526]
• ISO 801 Pulps — Determination of saleable mass in lots
  • ISO 801-1:1994 Part 1: Pulp baled in sheet form
  • ISO 801-2:1994 Part 2: Pulps (such as flash-dried pulps) baled in slabs
  • ISO 801-3:1994 Part 3: Unitized bales
• ISO 802:1976 Aluminium oxide primarily used for the production of aluminium — Preparation and storage of test samples [Withdrawn: replaced with ISO 23028]
• ISO 803:1976 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C (conventional moisture) [Withdrawn: replaced with ISO 806]
• ISO 804:1976 Aluminium oxide primarily used for the production of aluminium — Preparation of solution for analysis — Method by alkaline fusion [Withdrawn without replacement]
• ISO 805:1976 Aluminium oxide primarily used for the production of aluminium — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
• ISO 806:2004 Aluminium oxide primarily used for the production of aluminium — Determination of loss of mass at 300 degrees C and 1 000 degrees C
• ISO/R 807:1968 Chemical analysis of magnesium and magnesium alloys — Polarographic determination of zinc (zinc content between 0.1 and 4 %) [Withdrawn without replacement]
• ISO 808:1973 Aluminium and aluminium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex
• ISO 809:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content between 0,01 and 0,8 %)
• ISO 810:1973 Magnesium and magnesium alloys — Determination of manganese — Periodate photometric method (Manganese content less than 0,01 %)
• ISO 811:2018 Textiles — Determination of resistance to water penetration — Hydrostatic pressure test
• ISO 812:2017 Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness
• ISO 813:2019 Rubber, vulcanized or thermoplastic — Determination of adhesion to a rigid substrate — 90 degree peel method
• ISO 814:2017 Rubber, vulcanized or thermoplastic — Determination of adhesion to metal — Two-plate method
• ISO 815 Rubber, vulcanized or thermoplastic — Determination of compression set
  • ISO 815-1:2019 Part 1: At ambient or elevated temperatures
  • ISO 815-2:2019 Part 2: At low temperatures
• ISO 816:1983 Rubber, vulcanized — Determination of tear strength of small test pieces (Delft test pieces) [Withdrawn: replaced with ISO 34-2]
• ISO 817:2014 Refrigerants — Designation and safety classification
• ISO 818:1975 Fibre building boards — Definition — Classification [Withdrawn without replacement]
• ISO 819:1975 Fibre building boards — Determination of density [Withdrawn: replaced with ISO 9427]
• ISO 820:1975 Particle boards — Definition and classification [Withdrawn without replacement]
• ISO 821:1975 Particle boards — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424]
• ISO 822:1975 Particle boards — Determination of density [Withdrawn: replaced with ISO 9427]
• ISO 823:1975 Particle boards — Determination of moisture content [Withdrawn: replaced with ISO 9425]
• ISO/R 824 Household refrigerators
  • ISO/R 824-1:1968 Part 1: Performance requirements [Withdrawn: replaced with ISO 7371]
• ISO/R 825 Household refrigerators
  • ISO/R 825-1:1968 Part 1: Special low-temperature compartments for the storage of frozen foodstuffs [Withdrawn: replaced with ISO 7371]
• ISO/R 826:1968 Mechanical property limits for rolled products of aluminium and aluminium alloys [Withdrawn without replacement]
• ISO/R 827:1968 Mechanical property limits for extruded products of aluminium and aluminium alloys [Withdrawn without replacement]
• IEC/TR 828:1988 Pin allocations for future microprocessor systems using the IEC 603-2 connector [Withdrawn without replacement]
• ISO/R 829:1968 Mechanical property limits for aluminium alloy forgings [Withdrawn without replacement]
• ISO 830:1999 Freight containers — Vocabulary
• ISO/R 831:1968 Rules for construction of stationary boilers [Withdrawn without replacement]
• ISO 832:1994 Information and documentation — Bibliographic description and references — Rules for the abbreviation of bibliographic terms
• ISO 833:1974 Information and documentation — International list of periodical word title abbreviations [Withdrawn without replacement]
• ISO 834 Fire-resistance tests — Elements of building construction
  • ISO 834-1:1999 Part 1: General requirements
  • ISO 834-2:2019 Part 2: Requirements and recommendations for measuring furnace exposure on test samples
  • ISO/TR 834-3:2012 Part 3: Commentary on test method and guide to the application of the outputs from the fire-resistance test
  • ISO 834-4:2000 Part 4: Specific requirements for loadbearing vertical separating elements
  • ISO 834-5:2000 Part 5: Specific requirements for loadbearing horizontal separating elements
  • ISO 834-6:2000 Part 6: Specific requirements for beams
  • ISO 834-7:2000 Part 7: Specific requirements for columns
  • ISO 834-8:2002 Part 8: Specific requirements for non-loadbearing vertical separating elements
  • ISO 834-9:2003 Part 9: Specific requirements for non-loadbearing ceiling elements
  • ISO 834-10:2014 Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements
  • ISO 834-11:2014 Part 11: Specific requirements for the assessment of fire protection to structural steel elements
  • ISO 834-12:2012 Part 12: Specific requirements for separating elements evaluated on less than full scale furnaces
  • ISO 834-13:2019 Part 13: Requirements for the testing and assessment of applied fire protection to steel beams with web openings
  • ISO 834-14:2019 Part 14: Requirements for the testing and assessment of applied fire protection to solid steel bar
• ISO 835:2007 Laboratory glassware — Graduated pipettes
• ISO 836:2001 Terminology for refractories
• ISO/R 837:1968 Aircraft seat rails and pins [Withdrawn: replaced with ISO 7166]
• ISO 838:1974 Paper — Holes for general filing purposes — Specifications
• ISO 839 Milling machine arbors with 7/24 tapers
  • ISO 839-1:2006 Part 1: Dimensions and designation
  • ISO 839-2:1977 Part 2: Accessories
• ISO 840:1973 Numerical control of machines — 7-bit coded character set [Withdrawn: replaced with ISO 6983-1]
• ISO 841:2001 Industrial automation systems and integration — Numerical control of machines — Coordinate system and motion nomenclature
• ISO 842:1984 Raw materials for paints and varnishes — Sampling [Withdrawn: replaced with ISO 15528]
• ISO 843:1997 Information and documentation — Conversion of Greek characters into Latin characters
• ISO 844:2014 Rigid cellular plastics — Determination of compression properties
• ISO 845:2006 Cellular plastics and rubbers — Determination of apparent density
• ISO 846:2019 Plastics — Evaluation of the action of microorganisms
• ISO/R 847:1968 Phosphoric acid for industrial use — Determination of sulphate content — Volumetric method [Withdrawn: replaced with ISO 2997]
• ISO 848:1981 Phosphoric acid for industrial use — Determination of calcium content — Titrimetric method [Withdrawn without replacement]
• ISO/R 849:1968 Phosphoric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement]
• ISO 850:1976 Sodium tripolyphosphate for industrial use — Determination of matter insoluble in water [Withdrawn without replacement]
• ISO 851:1976 Sodium tripolyphosphate for industrial use — Measurement of pH — Potentiometric method [Withdrawn without replacement]
• ISO/R 852:1968 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement]
• ISO 853:1976 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of loss on ignition [Withdrawn without replacement]
• ISO/R 854:1968 Requirements for 28-volt D.C. flat strip fuses for aircraft [Withdrawn without replacement]
• ISO 855:2003 Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression
• ISO 856:2006 Oil of peppermint (Mentha x piperita L.)
• ISO 857 Welding and allied processes — Vocabulary
  • ISO 857-2:2005 Part 2: Soldering and brazing processes and related terms
• ISO 858:1973 Fishing nets — Designation of netting yarns in the Tex System
• ISO/R 859:1968 Testing and rating room air conditioners [Withdrawn: replaced with ISO 5151]
• ISO 860:2007 Terminology work — Harmonization of concepts and terms
• ISO/R 861:1968 Hexagon socket head cap screws — Metric series [Withdrawn: replaced with ISO 4762]
• ISO 862:1984 Surface active agents — Vocabulary
• ISO 863:2008 Cement — Test methods — Pozzolanicity test for pozzolanic cements
• ISO 864:1988 Arc welding — Solid and tubular cored wires which deposit carbon and carbon manganese steel — Dimensions of wires, spools, rims and coils [Withdrawn without replacement]
• ISO 865:1981 Slots in platens for projection welding machines
• ISO 866:2016 Centre drills for centre holes without protecting chamfers — Type A
• ISO/R 867:1968 Spindle noses and face plates — Bayonet type — Sizes for interchangeability — Metric series [Withdrawn: replaced with ISO 702-3]
• ISO 868:2003 Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
• ISO/R 869:1968 Plastics — Preparation of specimens for optical tests on plastics materials — Moulding method [Withdrawn without replacement]
• ISO/R 870:1968 Plastics — Preparation of specimens for optical tests on plastics materials — Casting method [Withdrawn without replacement]
• ISO 871:2006 Plastics — Determination of ignition temperature using a hot-air furnace
• ISO/R 872:1968 Plastics — Determination of ash of unplasticized cellulose acetate [Withdrawn: replaced with ISO 3451-3]
• ISO 873:1980 Peaches — Guide to cold storage
• ISO 874:1980 Fresh fruits and vegetables — Sampling
• ISO 875:1999 Essential oils — Evaluation of miscibility in ethanol
• ISO/R 876:1968 Special method of mechanical testing to determine the coding for deep penetration electrodes [Withdrawn without replacement]
• ISO 877 Plastics — Methods of exposure to solar radiation
  • ISO 877-1:2009 Part 1: General guidance
  • ISO 877-2:2009 Part 2: Direct weathering and exposure behind window glass
  • ISO 877-3:2018 Part 3: Intensified weathering using concentrated solar radiation
• ISO/R 878:1968 Plastics — Determination of resistance of plastics to color change upon exposure to light of the enclosed carbon arc [Withdrawn: replaced with ISO 4892]
• ISO/R 879:1968 Plastics — Determination of resistance of plastics to color change upon exposure to light of a xenon lamp [Withdrawn: replaced with ISO 4892]
• ISO 880:1981 Asbestos-cement siding shingles [Withdrawn without replacement]
• ISO 881:1980 Asbestos-cement pipes, joints and fittings for sewerage and drainage [Withdrawn without replacement]
• ISO 882 Cardamom (Elettaria cardamomum (Linnaeus) Maton var. minuscula Burkill) — Specification
  • ISO 882-1:1993 Part 1: Whole capsules
  • ISO 882-2:1993 Part 2: Seeds
• ISO 883:2013 Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions
• ISO/R 884:1968 Pictorial marking of transit packages containing photographic materials sensitive to radiant energy [Withdrawn: replaced with ISO 780]
• ISO 885:2000 General purpose bolts and screws — Metric series — Radii under the head
• ISO 886:1973 Aluminium and aluminium alloys — Determination of manganese — Photometric method (Manganese content between 0,005 and 1,5 %)
• ISO 887:2000 Plain washers for metric bolts, screws and nuts for general purposes — General plan
• ISO 888:2012 Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths
• ISO/R 889:1968 Test code for stationary steam generators of the power station type [Withdrawn without replacement]
• ISO/R 890:1968 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Positions [Withdrawn: replaced with ISO 4242]
• ISO/R 891:1968 Cinematography — Recording head gaps for two sound records on 16 mm magnetic film — Dimensions [Withdrawn: replaced with ISO 4242]
• ISO/R 892:1968 Cinematography — Dimensions of projection reels for 8mm motion-picture film (other than type S) [Withdrawn without replacement]
• ISO 893:1989 Surface active agents — Technical alkane sulfonates — Methods of analysis
• ISO 894:1977 Surface active agents — Technical sodium primary alkylsulphates — Methods of analysis
• ISO 895:1977 Surface active agents — Technical sodium secondary alkylsulphates — Methods of analysis
• ISO/TR 896:1977 Surface active agents — Scientific classification [Withdrawn without replacement]
• ISO 897:2000 Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side
• ISO 898 Mechanical properties of fasteners made of carbon steel and alloy steel^{[Note 3]}
• ISO 899 Plastics — Determination of creep behaviour
  • ISO 899-1:2017 Part 1: Tensile creep
  • ISO 899-2:2003 Part 2: Flexural creep by three-point loading
• ISO 900:1977 Aluminium oxide primarily used for the production of aluminium — Determination of titanium content — Diantipyrylmethane photometric method [Withdrawn without replacement]
• ISO 901:1976 Aluminium oxide primarily used for the production of aluminium — Determination of absolute density — Pyknometer method [Withdrawn without replacement]
• ISO 902:1976 Aluminium oxide primarily used for the production of aluminium — Measurement of the angle of repose
• ISO 903:1976 Aluminium oxide primarily used for the production of aluminium — Determination of untamped density [Withdrawn without replacement]
• ISO 904:1976 Hydrochloric acid for industrial use — Determination of total acidity — Titrimetric method [Withdrawn without replacement]
• ISO 905:1976 Hydrochloric acid for industrial use — Evaluation of hydrochloric acid concentration by measurement of density [Withdrawn without replacement]
• ISO 906:1976 Hydrochloric acid for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
• ISO 907:1976 Hydrochloric acid for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
• ISO 908:1980 Hydrochloric acid for industrial use — Determination of oxidizing or reducing substances content — Titrimetric method [Withdrawn without replacement]
• ISO/R 909:1968 Hydrochloric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement]
• ISO 910:1977 Sulphuric acid and oleum for industrial use — Determination of total acidity, and calculation of free sulphur trioxide content of oleum — Titrimetric method
• ISO 911:1977 Sulphuric acid for industrial use — Evaluation of sulphuric acid concentration by measurement of density [Withdrawn without replacement]
• ISO/R 912:1968 Sulphuric acid and oleum for industrial use — Determination of sulphur dioxide content — Barium sulphate gravimetric method [Withdrawn without replacement]
• ISO 913:1977 Sulphuric acid and oleum for industrial use — Determination of ash — Gravimetric method [Withdrawn without replacement]
• ISO 914:1977 Sulphuric acid and oleum for industrial use — Determination of total nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
• ISO/R 915:1968 Sulphuric acid and oleum for industrial use — Determination of iron content — 2,2'- Bipyridyl spectrophotometric method [Withdrawn without replacement]
• ISO 916:2020 Testing of refrigerating systems
• ISO 917:1989 Testing of refrigerant compressors [Withdrawn without replacement]
• ISO 918:1983 Volatile organic liquids for industrial use — Determination of distillation characteristics
• ISO/R 919:1969 Guide for the preparation of classified vocabularies (example of method) [Withdrawn: replaced with ISO 10241]
• ISO 920:1976 Wool — Determination of fibre length (barbe and hauteur) using a comb sorter
• ISO 921:1997 Nuclear energy — Vocabulary [Withdrawn without replacement]
• ISO/R 922:1969 Plastics — Polypropylene (PP) and propylene-copolymer thermoplastics — Determination of isotactic index [Withdrawn: replaced with ISO 1873-1, now replaced by ISO 9113]
• ISO 923:2000 Coal cleaning equipment — Performance evaluation
• ISO 924:1989 Coal preparation plant — Principles and conventions for flowsheets
• ISO 925:2019 Solid mineral fuels — Determination of carbonate carbon content — Gravimetric method
• ISO/R 926:1969 Solid mineral fuels — Determination of total nitrogen, sulphur, chlorine, and phosphorus — Gravimetric method [Withdrawn: replaced with ISO 333 (now withdrawn), ISO 334, ISO 352 (now withdrawn), and ISO 622]
• ISO 927:2009 Spices and condiments — Determination of extraneous matter and foreign matter content
• ISO 928:1997 Spices and condiments — Determination of total ash
• ISO 929:1980 Spices and condiments — Determination of water-insoluble ash [Withdrawn without replacement]
• ISO 930:1997 Spices and condiments — Determination of acid-insoluble ash
• ISO 931:1980 Green bananas — Guide to storage and transport
• ISO/R 932:1969 Animal fats — Determination of insoluble impurities content [Withdrawn: replaced with ISO 663]
• ISO/R 933:1969 Animal fats — Determination of moisture and volatile matter content [Withdrawn: replaced with ISO 662]
• ISO 934:1980 Animal and vegetable fats and oils — Determination of water content — Entrainment method
• ISO 935:1988 Animal and vegetable fats and oils — Determination of titre
• :1998 Meat and meat products — Determination of total ash
• ISO 937:1978 Meat and meat products — Determination of nitrogen content (Reference method)
• ISO 938:1975 Hand-operated stillage trucks — Principal dimensions
• ISO 939:1980 Spices and condiments — Determination of moisture content — Entrainment method
• ISO 940:1979 Spices and condiments — Determination of alcohol-soluble extract [Withdrawn without replacement]
• ISO 941:1980 Spices and condiments — Determination of cold water-soluble extract
• ISO/R 942:1969 Whiteheart malleable cast iron [Withdrawn: replaced with ISO 5922]
• ISO/R 943:1969 Blackheart malleable cast iron [Withdrawn: replaced with ISO 5922]
• ISO/R 944:1969 Pearlitic malleable cast iron [Withdrawn: replaced with ISO 5922]
• ISO 945 Microstructure of cast irons
  • ISO 945-1:2019 Part 1: Graphite classification by visual analysis
  • ISO/TR 945-2:2011 Part 2: Graphite classification by image analysis
  • ISO/TR 945-3:2016 Part 3: Matrix structures
  • ISO 945-4:2019 Part 4: Test method for evaluating nodularity in spheroidal graphite cast irons
• ISO 946:1975 Grey cast iron — Beam unnotched impact test [Withdrawn without replacement]
• ISO/R 947:1969 Recommended practice for radiographic inspection of circumferential fusion welded butt joints in steel pipes up to 50 mm (2 in) wall thickness [Withdrawn: replaced with ISO 1106-3, later ISO 17636, now ISO 17636-1]
• ISO 948:1980 Spices and condiments — Sampling
• ISO 949:1987 Cauliflowers — Guide to cold storage and refrigerated transport
• ISO 950:1979 Cereals — Sampling (as grain) (Withdrawn: replaced by ISO 13690, later ISO 24333)
• ISO 951:1979 Pulses in bags — Sampling (Withdrawn: replaced by ISO 13690, later ISO 24333)
• ISO/R 952:1969 Light metal and light metal alloys — Tubes — Tensile Test [Withdrawn: replaced with ISO 6892-1]
• ISO/R 953:1969 Light metal and light metal alloys — Tubes — Drift expanding test [Withdrawn: replaced with ISO 8493]
• ISO/R 954:1969 Light metal and light metal alloys — Tubes — Bend test [Withdrawn: replaced with ISO 7438]
• ISO/R 955:1969 Aluminium and aluminium alloys — Tubes — Flattening test [Withdrawn: replaced with ISO 8492]
• ISO/R 956:1969 Light metal and light metal alloys — Wires — Tensile Test [Withdrawn: replaced with ISO 6892-1]
• ISO/R 957:1969 Aluminium and aluminium alloys — Wires — Simple torsion test [Withdrawn: replaced with ISO 7800]
• ISO/R 958:1969 Aluminium and aluminium alloys — Wires — Wrapping test [Withdrawn: replaced with ISO 7802]
• ISO 959 Pepper (Piper nigrum L.), whole or ground — Specification
  • ISO 959-1:1998 Part 1: Black pepper
  • ISO 959-2:1998 Part 2: White pepper
• ISO 960:1988 Plastics — Polyamides (PA) — Determination of water content [Withdrawn: replaced with ISO 15512]
• ISO/R 961:1969 Information processing — Implementation of the 6-bit and 7-bit coded character sets on 7- track 12,7 mm (0.5 in) magnetic tape [Withdrawn without replacement]
• ISO 962:1974 Information processing — Implementation of the 7- bit coded character set and its 7- bit and 8-bit extensions on 9- track 12,7 mm (0.5 in) magnetic tape
• ISO 963:1973 Information processing — Guide for the definition of 4- bit character sets derived from the 7- bit coded character set for information processing interchange [Withdrawn without replacement]
• ISO/R 964:1969 Shipbuilding details — Mating dimensions for pipeline flanges for ships
• ISO 965 ISO general purpose metric screw threads — Tolerances
• ISO/R 966:1969 Seeds — Sampling and methods of test [Withdrawn without replacement]
• ISO/R 967:1969 Pesticides — Common names — Ninth series of terms [Withdrawn: replaced with ISO 1750]
• ISO/R 968:1969 Pesticides — Common names — Tenth series of terms [Withdrawn: replaced with ISO 1750]
• ISO/R 969:1969 Pesticides — Common names — Eleventh series of terms [Withdrawn: replaced with ISO 1750]
• ISO/R 970:1969 Pesticides — Common names — Twelfth series of terms [Withdrawn: replaced with ISO 1750]
• ISO/R 971:1969 Pesticides — Common names — Thirteenth series of terms [Withdrawn: replaced with ISO 1750]
• ISO 972:1997 Chillies and capsicums, whole or ground (powdered) — Specification
• ISO 973:1999 Pimento (allspice) [Pimenta dioica (L.) Merr.], whole or ground — Specification
• ISO 974:2000 Plastics — Determination of the brittleness temperature by impact
• ISO 975:2021 Brown coals and lignites — Determination of yield of benzene-soluble extract — Semi-automatic method
• ISO 976:2013 Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH
• ISO/R 977:1969 Sodium hydroxide for industrial use — Preparation and storage of test sample [Withdrawn: replaced with ISO 3195]
• ISO/R 978:1969 Sodium hydroxide for industrial use — Preparation of sample solution [Withdrawn: replaced with ISO 3195]
• ISO 979:1974 Sodium hydroxide for industrial use — Method of assay
• ISO 980:1976 Sodium hydroxide for industrial use — Determination of carbonates content — Gas-volumetric method [Withdrawn without replacement]
• ISO 981:1973 Sodium hydroxide for industrial use — Determination of chloride content — Mercurimetric method
• ISO 982:1976 Sodium hydroxide for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
• ISO 983:1974 Sodium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
• ISO 984:1974 Sodium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method [Withdrawn without replacement]
• ISO 985:1974 Sodium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate [Withdrawn without replacement]
• ISO 986:1976 Sodium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method [Withdrawn without replacement]
• ISO/R 987:1969 Sodium hydroxide for industrial use — Determination of water insoluble matter [Withdrawn without replacement]
• ISO/R 988:1969 Potassium hydroxide for industrial use — Preparation and storage of test sample [Withdrawn: replaced with ISO 2466]
• ISO/R 989:1969 Potassium hydroxide for industrial use — Preparation of sample solution [Withdrawn: replaced with ISO 2466]
• ISO 990:1974 Potassium hydroxide for industrial use — Method of assay [Withdrawn without replacement]
• ISO 991:1976 Potassium hydroxide for industrial use — Determination of carbonates content — Gas-volumetric method [Withdrawn without replacement]
• ISO 992:1975 Potassium hydroxide for industrial use — Determination of chlorides content — Mercurimetric method [Withdrawn without replacement]
• ISO 993:1976 Potassium hydroxide for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
• ISO 994:1973 Potassium hydroxide for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
• ISO 995:1975 Potassium hydroxide for industrial use — Determination of silica content — Reduced silico-molybdic complex photometric method [Withdrawn without replacement]
• ISO 996:1976 Potassium hydroxide for industrial use — Determination of silica content — Gravimetric method by precipitation of quinoline molybdosilicate [Withdrawn without replacement]
• ISO 997:1976 Potassium hydroxide for industrial use — Determination of calcium content — EDTA (disodium salt) complexometric method [Withdrawn without replacement]
• ISO/R 998:1969 Potassium hydroxide for industrial use — Determination of water insoluble matter [Withdrawn without replacement]
• ISO 999:1996 Information and documentation — Guidelines for the content, organization, and presentation of indexes

ISO 1000 – ISO 1499[]

• ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [Withdrawn 2009-11-17: replaced with ISO 80000-1]
• ISO/IEC 1001:2012 Information technology – File structure and labelling of magnetic tapes for information interchange
• ISO 1002:1983 Rolling bearings — Airframe bearings — Characteristics, boundary dimensions, tolerances, static load ratings
• ISO 1003:2008 Spices — Ginger (Zingiber officinale Roscoe) — Specification
• ISO 1004 Information processing – Magnetic ink character recognition – Print specifications
  • ISO 1004-1:2013 Part 1: Print specifications for E-13B
  • ISO 1004-2:2013 Part 2: Print specifications for CMC7
• ISO 1005 Railway rolling stock material
  • ISO 1005-1:1994 Part 1: Rough-rolled tyres for tractive and trailing stock — Technical delivery conditions
  • ISO 1005-2:1986 Part 2: Tyres, wheel centres and tyred wheels for tractive and trailing stock — Dimensional, balancing and assembly requirements
  • ISO 1005-3:1982 Part 3: Axles for tractive and trailing stock — Quality requirements
  • ISO 1005-4:1986 Part 4: Rolled or forged wheel centres for tyred wheels for tractive and trailing stock — Quality requirements
  • ISO/R 1005-5:1969 Part 5: Cast wheel centres in non-alloy steel for tyred wheels for trailer stock [Withdrawn without replacement]
  • ISO 1005-6:1994 Part 6: Solid wheels for tractive and trailing stock — Technical delivery conditions
  • ISO 1005-7:1982 Part 7: Wheelsets for tractive and trailing stock — Quality requirements
  • ISO 1005-8:1986 Part 8: Solid wheels for tractive and trailing stock — Dimensional and balancing requirements
  • ISO 1005-9:1986 Part 9: Axles for tractive and trailing stock — Dimensional requirements
• ISO 1006:1983 Building construction — Modular coordination — Basic module [Withdrawn: replaced with ISO 21723]
• ISO 1007 Photography – 135-size film and magazine – Specifications
• ISO 1008:1992 Photography — Paper dimensions — Pictorial sheets
• ISO 1009:2000 Photography — Paper dimensions — Rolls for printers
• ISO 1010:1973 Photography — Colour paper for general use — Sizes of sheet material [Withdrawn: replaced with ISO 1008]
• ISO 1011:1973 Photography — Colour paper for roll paper printers — Sizes of rolls [Withdrawn: replaced with ISO 1009]
• ISO 1012:1998 Photography — Films in sheets and rolls for general use — Dimensions
• ISO 1013:2020 Coke — Determination of bulk density in a large container
• ISO 1014:2021 Coke — Determination of true relative density, apparent relative density and porosity
• ISO 1015:1992 Brown coals and lignites — Determination of moisture content — Direct volumetric method [Withdrawn without replacement]
• ISO/R 1016:1969 Brown coals and lignites — Determination of ash [Withdrawn: replaced with ISO 1171]
• ISO 1017:2006 Brown coals and lignites — Determination of acetone-soluble material
• ISO 1018:2019 Hard coal — Determination of moisture-holding capacity
• ISO 1019:1982 Cinematography — Spools, daylight loading type for 16 mm motion-picture cameras — Dimensions
• ISO 1020:1974 Cinematography — Spools, daylight loading type for double-8 mm motion-picture cameras — Dimensions [Withdrawn without replacement]
• ISO 1021:1980 Aircraft — Engine nacelle fire extinguisher apertures and doors
• ISO 1022:1988 Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (old type) — Dimensions (Inch series) (Not valid for new designs) [Withdrawn: replaced with ISO 8775 on 2012-04-02]
• ISO 1023:1974 Aircraft — High pressure air charging valves [Withdrawn without replacement]
• ISO 1024:1989 Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-1]
• ISO 1025:1981 Textile machinery and accessories — Sectional beams for warp knitting machines — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-5]
• ISO 1026:1982 Fruit and vegetable products — Determination of dry matter content by drying under reduced pressure and of water content by azeotropic distillation
• ISO 1027:1983 Radiographic image quality indicators for non-destructive testing — Principles and identification [Withdrawn: replaced with ISO 19232-(1-2)]
• ISO 1028:1973 Information processing — Flowchart symbols [Withdrawn: replaced with ISO 5807]
• ISO 1029:1974 Coniferous sawn timber — Defects — Classification
• ISO 1030:1975 Coniferous sawn timber — Defects — Measurement
• ISO 1031:1974 Coniferous sawn timber — Defects — Terms and definitions
• ISO 1032:1974 Coniferous sawn timber — Sizes — Terms and definitions [Withdrawn: replaced with ISO 24294]
• ISO 1033:1975 Aircraft — Dimensions for general purpose push-pull three-pole circuit-breakers
• ISO 1034:1973 Aircraft – Ground air-conditioning connections
• ISO 1035 Hot-rolled steel bars
  • ISO 1035-1 Part 1: Dimensions of round bars
  • ISO 1035-2 Part 2: Dimensions of square bars
  • ISO 1035-3 Part 3: Dimensions of flat bars
  • ISO 1035-4 Part 4: Tolerances
• ISO 1036:1984 Textile machinery — Dyeing and finishing machines — Definition of left and right sides
• ISO 1037:1982 Textile machinery and accessories — Beams for dyeing slivers and yarn — Terminology and main dimensions [Withdrawn: replaced with ISO 8116-7]
• ISO/R 1038:1969 Rolling bearings — Cylindrical rolling bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
• ISO 1039:1995 Cinematography — Cores for motion-picture and magnetic film rolls — Dimensions
• ISO 1040:1983 Building construction — Modular coordination — Multimodules for horizontal coordinating dimensions [Withdrawn: replaced with ISO 21723]
• ISO 1041:1973 Essential oils — Determination of freezing point
• ISO 1042:1998 Laboratory glassware — One-mark volumetric flasks
• ISO 1043 Plastics — Symbols and abbreviated terms
  • ISO 1043-1:2011 Part 1: Basic polymers and their special characteristics
  • ISO 1043-2:2011 Part 2: Fillers and reinforcing materials
  • ISO 1043-3:2016 Part 3: Plasticizers
  • ISO 1043-4:2021 Part 4: Flame retardants
• ISO 1044:1993 Industrial trucks — Lead-acid traction batteries for electric trucks — Preferred voltages [Withdrawn without replacement]
• ISO/R 1045:1969 Straight resistance spot welding electrodes – Dimensions [Withdrawn: replaced with ISO 5184]
• ISO 1046:1973 Architectural and building drawings — Vocabulary [Withdrawn: replaced with ISO 10209-1, now ISO 10209]
• ISO 1047:1973 Architectural and building drawings — Presentation of drawings — Scales [Withdrawn without replacement]
• ISO 1048:1991 Photography — Exposed roll films — Identification [Withdrawn: replaced with ISO 732]
• ISO 1049:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating conveyors and feeders with rectangular or trapezoidal trough
• ISO 1050:1975 Continuous mechanical handling equipment for loose bulk materials — Screw conveyors
• ISO 1051:1999 Rivet shank diameters
• ISO 1052:1982 Steels for general engineering purposes [Withdrawn without replacement]
• ISO 1053:1975 Zinc — Determination of copper content — Spectrophotometric method [Withdrawn without replacement]
• ISO 1054:1975 Zinc — Determination of cadmium content — Polarographic method [Withdrawn without replacement]
• ISO 1055:1975 Zinc and zinc alloys — Determination of iron content — Spectrophotometric method [Withdrawn without replacement]
• ISO 1056:1975 Numerical control of machines — Punched tape block formats — Coding of preparatory functions G and miscellaneous functions M [Withdrawn: replaced with ISO 6983-1]
• ISO 1057:1973 Numerical control of machines — Interchangeable punched tape variable block format for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
• ISO 1058:1973 Numerical control of machines — Punched tape variable block for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
• ISO 1059:1973 Numerical control of machines — Punched tape fixed block format for positioning and straight-cut machining [Withdrawn: replaced with ISO 6983-1]
• ISO 1060 Plastics — Homopolymer and copolymer resins of vinyl chloride
  • ISO 1060-1:1998 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24024-1]
  • ISO 1060-2:1998 Part 2: Preparation of test samples and determination of properties [Withdrawn: replaced with ISO 24024-2]
• ISO 1061:1990 Plastics — Unplasticized cellulose acetate — Determination of free acidity
• ISO/R 1062:1969 Pesticides — Common names — Fourteenth series of terms [Withdrawn: replaced with ISO 1750]
• ISO 1063:1974 Surface active agents — Determination of stability in hard water
• ISO 1064:1974 Surface active agents — Determination of apparent density of pastes on filling
• ISO 1065:1991 Non-ionic surface-active agents obtained from ethylene oxide and mixed non-ionic surface-active agents — Determination of cloud point
• ISO 1066:1975 Analysis of soaps — Determination of glycerol content — Titrimetric method
• ISO 1067:1974 Analysis of soaps — Determination of unsaponifiable, unsaponified and unsaponified saponifiable matter
• ISO 1068:1975 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of compacted apparent bulk density
• ISO 1069:1973 Magnetic compasses and binnacles for sea navigation – Vocabulary
• ISO 1070:1992 Liquid flow measurement in open channels – Slope-area method
• ISO 1071:2015 Welding consumables — Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron — Classification
• ISO 1072:1975 Solid wood parquet — General characteristics
• ISO 1073 Alphanumeric character sets for optical recognition
  • ISO 1073-1:1976 Part 1: Character set OCR-A – Shapes and dimensions of the printed image
  • ISO 1073-2:1976 Part 2: Character set OCR-B – Shapes and dimensions of the printed image
• ISO 1074:1991 Counterbalanced fork-lift trucks — Stability tests [Withdrawn: replaced with ISO 22915-2]
• ISO/R 1075:1969 Performance requirements for heat-resisting (190 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
• ISO/R 1076:1969 General purpose electric cables with aluminium or aluminium alloy conductors for aircraft [Withdrawn without replacement]
• ISO/R 1077:1969 Dimensions of elastometric toroidal sealing rings for pipe-fittings in aircraft (Inch series - Class 1 tolerances) [Withdrawn without replacement]
• ISO/R 1078:1969 Dimensions of elastometric toroidal sealing rings for aircraft (Inch series - Class 1 tolerances) [Withdrawn without replacement]
• ISO 1079:1989 Metallic materials — Hardness test — Verification of Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-2]
• ISO 1080:1975 Machine tools — Morse taper shanks — Cotter slots with taper keys
• ISO 1081:2013 Belt drives – V-belts and V-ribbed belts, and corresponding grooved pulleys – Vocabulary
• ISO 1082:1990 Mining — Shackle type connector units for chain conveyors
• ISO 1083:2018 Spheroidal graphite cast irons — Classification
• ISO 1084:1975 Industrial tractors — Definition and nominal rating [Withdrawn without replacement]
• ISO 1085:2016 Assembly tools for screws and nuts — Double-ended wrenches — Size pairing
• ISO 1086:1991 Information and documentation – Title leaves of books
• ISO 1087:2019 Terminology work and terminology science — Vocabulary
• ISO 1088:2007 Hydrometry – Velocity-area methods using current-meters – Collection and processing of data for determination of uncertainties in flow measurement
• ISO 1089:1980 Electrode taper fits for spot welding equipment — Dimensions
• ISO 1090:1981 Office machines and data processing equipment — Function key symbols on typewriters [Withdrawn: replaced with ISO 9995-(1,7)]
• ISO 1091:1977 Typewriters — Layout of printing and function keys [Withdrawn: replaced with ISO 9995-(1,7)]
• ISO 1092
  • ISO 1092-1:1974 Adding machines and calculating machines — Numeric section of ten-key keyboards [Withdrawn: replaced with ISO 9995-(1,7)]
• ISO 1093:1981 Adding machines and calculating machines — Keytop and printed or displayed symbols [Withdrawn: replaced with ISO 9995-(1,7)]
• ISO/R 1094:1969 Adding machines and calculating machines — Classification [Withdrawn without replacement]
• ISO 1095:1989 Shipbuilding and marine structures — Toughened safety glass panes for side scuttles [Withdrawn: replaced with ISO 21005]
• ISO 1096:2021 Plywood — Classification
• ISO 1097:1975 Plywood — Measurement of dimensions of panels [Withdrawn without replacement]
• ISO 1098:1975 Veneer plywood for general use — General requirements [Withdrawn without replacement]
• ISO 1099:2017 Metallic materials — Fatigue testing — Axial force-controlled method [Withdrawn without replacement]
• ISO 1100 Hydrometry – Measurement of liquid flow in open channels
  • ISO 1100-1:1996 Part 1: Establishment and operation of a gauging station [Withdrawn: replaced with ISO 18365]
  • ISO 1100-2:2010 Part 2: Determination of the stage-discharge relationship [Withdrawn: replaced with ISO 18320]
• ISO 1101:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out
• ISO 1102:2001 Commercial road vehicles — 50 mm drawbar eye — Interchangeability
• ISO 1103:2007 Road vehicles — Coupling balls for caravans and light trailers — Dimensions
• ISO 1104:1977 Surface active agents — Technical sodium alkylarylsulphonates (excluding benzene derivatives) — Methods of analysis
• ISO/R 1105:1969 Pesticides considered not to require common names — Second list [Withdrawn: replaced with ISO 765]
• ISO 1106 Recommended practice for radiographic examination of fusion welded joints
  • ISO 1106-1:1984 Part 1: Fusion welded butt joints in steel plates up to 50 mm thick [Withdrawn: replaced with ISO 17636]
  • ISO 1106-2:1985 Part 2: Fusion welded butt joints in steel plates thicker than 50 mm and up to and including 200 mm in thickness [Withdrawn: replaced with ISO 17636]
  • ISO 1106-3:1984 Part 3: Fusion welded circumferential joints in steel pipes of up to 50 mm wall thickness [Withdrawn: replaced with ISO 17636]
• ISO 1107:2017 Fishing nets – Netting – Basic terms and definitions
• ISO 1108:1992 Spices and condiments — Determination of non-volatile ether extract
• ISO 1109:1975 Refractory products — Classification of dense shaped refractory products [Withdrawn: replaced with ISO 10081-1]
• ISO 1110:2019 Plastics — Polyamides — Accelerated conditioning of test specimens
• ISO 1111 Single cold-reduced tinplate and single cold-reduced blackplate
  • ISO 1111-1:1983 Part 1: Electrolytic and hot-dipped tinplate sheet and blackplate sheet [Withdrawn: replaced with ISO 11949]
  • ISO 1111-2:1983 Part 2: Electrolytic tinplate coil and blackplate coil for subsequent cutting into sheet form [Withdrawn: replaced with ISO 11949]
• ISO 1112:2009 Horology – Functional and non-functional jewels
• ISO 1113:1979 Information processing – Representation of the 7- bit coded character set on punched tape
• ISO 1114:1977 Cocoa beans — Cut test [Withdrawn: replaced with ISO 2451]
• ISO/R 1115:1969 Finishes with the external screw thread for glass containers and gauges for inspection of screw closures [Withdrawn without replacement]
• ISO 1116:1999 Micrographics — 16 mm and 35 mm microfilm spools and reels — Specifications [Withdrawn without replacement]
• ISO 1117:1975 Bonded abrasive products — Grinding-wheel dimensions (Part 2) [Withdrawn: replaced with ISO 603-(1-16)]
• ISO 1118:1978 Aluminium and aluminium alloys — Determination of titanium — Spectrophotometric chromotropic acid method
• ISO 1119:2011 Geometrical product specifications (GPS) – Series of conical tapers and taper angles
• ISO 1120:2012 Conveyor belts — Determination of strength of mechanical fastenings — Static test method
• ISO 1121:1976 Conveyor belts — List of characteristics which may be required according to use [Withdrawn without replacement]
• ISO 1122 Vocabulary of gear terms
  • ISO 1122-1:1998 Part 1: Definitions related to geometry
  • ISO 1122-2:1999 Part 2: Definitions related to worm gear geometry
• ISO 1123:1976 Tapered roller bearings — Inch series — Chamfer dimension limits [Withdrawn without replacement]
• ISO 1124:1988 Rubber compounding ingredients — Carbon black shipment sampling procedures
• ISO 1125:2015 Rubber compounding ingredients — Carbon black — Determination of ash
• ISO 1126:2015 Rubber compounding ingredients — Carbon black — Determination of loss on heating
• ISO 1127:1992 Stainless steel tubes — Dimensions, tolerances and conventional masses per unit length
• ISO/R 1128:1969 Steel tubes — Butt-welding bends 5D (90° and 180°) [Withdrawn: replaced with ISO 3419]
• ISO 1129:1980 Steel tubes for boilers, superheaters and heat exchangers — Dimensions, tolerances and conventional masses per unit length [Withdrawn without replacement]
• ISO 1130:1975 Textile fibres — Some methods of sampling for testing
• ISO 1131:1976 Textile machinery and accessories — Weft pirns for box-loaders for automatic looms — Dimensions of pirn tip [Withdrawn without replacement]
• ISO 1132 Rolling bearings – Tolerances
  • ISO 1132-1:2000 Part 1: Terms and definitions
  • ISO 1132-2:2001 Part 2: Measuring and gauging principles and methods
• ISO 1133 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics
  • ISO 1133-1:2011 Part 1: Standard method
  • ISO 1133-2:2011 Part 2: Method for materials sensitive to time-temperature history and/or moisture
• ISO 1134:1993 Pears — Cold storage
• ISO 1135 Transfusion equipment for medical use
  • ISO 1135-1:1987 Part 1: Glass transfusion bottles, closures and caps [Withdrawn without replacement]
  • ISO 1135-3:2016 Part 3: Blood-taking sets for single use
  • ISO 1135-4:2015 Part 4: Transfusion sets for single use, gravity feed
  • ISO 1135-5:2015 Part 5: Transfusion sets for single use with pressure infusion apparatus
• ISO 1136:2015 Wool — Determination of mean diameter of fibres — Air permeability method
• ISO 1137:1975 Plastics — Determination of behaviour in a ventilated tubular oven [Withdrawn without replacement]
• ISO 1138:2007 Rubber compounding ingredients �� Carbon black — Determination of sulfur content
• ISO 1139:1973 Textiles — Designation of yarns
• ISO 1140:2021 Fibre ropes — Polyamide — 3-, 4-, 8- and 12-strand ropes
• ISO 1141:2021 Fibre ropes — Polyester — 3-, 4-, 8- and 12-strand ropes
• ISO 1142:1973 Ropes — Sampling and conditioning for testing [Withdrawn: replaced with ISO 2307]
• ISO 1143:2021 Metallic materials — Rotating bar bending fatigue testing
• ISO 1144:2016 Textiles — Universal system for designating linear density (Tex System)
• ISO/R 1145:1969 Refractory arch bricks — Dimensions [Withdrawn: replaced with ISO 5019-2]
• ISO 1146:1988 Pyrometric reference cones for laboratory use – Specification
• ISO 1147:1995 Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test
• ISO 1148:1980 Plastics — Aqueous dispersions of polymers and copolymers — Determination of pH [Withdrawn: replaced with ISO 976]
• ISO/R 1149:1969 Layout of multilingual classified vocabularies [Withdrawn: replaced with ISO 10241]
• ISO 1150:1997 Textile machinery and accessories — Drop wires for warp stop motions for weaving machines with automatic drawing-in
• ISO 1151 Flight dynamics – Concepts, quantities and symbols
  • ISO 1151-1:1988 Part 1: Aircraft motion relative to the air
  • ISO 1151-2:1985 Part 2: Motions of the aircraft and the atmosphere relative to the Earth
  • ISO 1151-3:1989 Part 3: Derivatives of forces, moments and their coefficients
  • ISO 1151-4:1994 Part 4: Concepts and quantities used in the study of aircraft stability and control
  • ISO 1151-5:1987 Part 5: Quantities used in measurements
  • ISO 1151-6:1982 Part 6: Aircraft geometry
  • ISO 1151-7:1985 Part 7: Flight points and flight envelopes
  • ISO 1151-8:1992 Part 8: Concepts and quantities used in the study of the dynamic behaviour of the aircraft
  • ISO 1151-9:1993 Part 9: Models of atmospheric motions along the trajectory of the aircraft
• ISO 1152:1974 Flight dynamics – Concepts, quantities and symbols – Part 2: Motions of the aircraft and the atmosphere relative to the Earth [Renamed ISO 1151-2]
• ISO 1153:1972 Flight dynamics – Concepts, quantities and symbols – Part 3: Derivatives of forces, moments and their coefficients [Renamed ISO 1151-3]
• ISO 1154:1975 Information processing – Punched paper tape – Dimensions and location of feed holes and code holes
• ISO 1155:1978 Information processing – Use of longitudinal parity to detect errors in information messages
• ISO/R 1156:1969 Shipbuilding details – Wrought aluminium alloys for use in shipbuilding [Withdrawn without replacement]
• ISO 1157:1990 Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio [Withdrawn without replacement]
• ISO 1158:1998 Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine content
• ISO 1159:1978 Plastics — Vinyl chloride-vinyl acetate copolymers — Determination of vinyl acetate [Withdrawn without replacement]
• ISO 1160:1976 Rolling bearings for railway axle-boxes — Acceptance inspection [Withdrawn without replacement]
• ISO 1161:2016 Series 1 freight containers — Corner and intermediate fittings — Specifications
• ISO 1162:1975 Cereals and pulses — Method of test for infestation by X-ray examination [Withdrawn: replaced with ISO 6639-4]
• ISO 1163 Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials
  • ISO 1163-1:1995 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 21306-1]
  • ISO 1163-2:1995 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 21306-2]
• ISO/R 1164:1970 Polyethylene (PE) pipes — Tolerances on outside diameters [Withdrawn: replaced with ISO 3607, now ISO 11922-(1-2)]
• ISO/R 1165:1970 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on wall thicknesses up to 6 mm [Withdrawn: replaced with ISO 3606, now ISO 11922-(1-2)]
• ISO/R 1166:1970 Polyethylene (PE) pipes — Tolerances on wall thicknesses up to 6 mm [Withdrawn: replaced with ISO 3607, now ISO 11922-(1-2)]
• ISO 1167 Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure
  • ISO 1167-1:2006 Part 1: General method
  • ISO 1167-2:2006 Part 2: Preparation of pipe test pieces
• ISO 1168:1973 Combine harvesters — Width of cut and number of knife sections [Withdrawn without replacement]
• ISO 1169:2006 Zinc alloys — Determination of aluminium content — Titrimetric method
• ISO 1170:2020 Coal and coke — Calculation of analyses to different bases
• ISO 1171:2010 Solid mineral fuels — Determination of ash
• ISO 1172:1996 Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods
• ISO 1173:2001 Assembly tools for screws and nuts — Drive ends for hand- and machine-operated screwdriver bits and connecting parts — Dimensions, torque testing
• ISO 1174 Assembly tools for screws and nuts — Driving squares
  • ISO 1174-1:2011 Part 1: Driving squares for hand socket tools
  • ISO 1174-2:1996 Part 2: Driving squares for power socket tools
• ISO 1175:1976 Shipbuilding — Dimensions and sectional properties of aluminium alloy sections for marine use [Withdrawn without replacement]
• ISO 1176:1990 Road vehicles – Masses – Vocabulary and codes
• ISO 1177:1985 Information processing – Character structure for start/stop and synchronous character oriented transmission
• ISO 1178:1976 Magnesium alloys — Determination of soluble zirconium — Alizarin sulphonate photometric method
• ISO 1179 Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing
  • ISO 1179-1:2013 Part 1: Threaded ports
  • ISO 1179-2:2013 Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
  • ISO 1179-3:2007 Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
  • ISO 1179-4:2007 Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
• ISO 1180:1983 Shanks for pneumatic tools and fitting dimensions of chuck bushings
• ISO 1181:2004 Fibre ropes — Manila and sisal — 3-, 4- and 8-strand ropes
• ISO 1182:2020 Reaction to fire tests for products—Non-combustibility test
• ISO 1183 Plastics — Methods for determining the density of non-cellular plastics
  • ISO 1183-1:2019 Part 1: Immersion method, liquid pycnometer method and titration method
  • ISO 1183-2:2019 Part 2: Density gradient column method
  • ISO 1183-3:1999 Part 3: Gas pyknometer method
• ISO 1184:1983 Plastics — Determination of tensile properties of films [Withdrawn: replaced with ISO 527-3]
• ISO 1185:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage
• ISO/R 1186:1970 Pressures in brake lines and braking efficiency [Withdrawn without replacement]
• ISO 1187:1983 Special wrought copper alloys — Chemical composition and forms of wrought products [Withdrawn without replacement]
• ISO 1188:1984 Cinematography — Recorded characteristic for magnetic sound on full-coat 16 mm motion-picture film — Specifications
• ISO 1189:1986 Cinematography — Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints — Specifications
• ISO 1190 Copper and copper alloys — Code of designation
  • ISO 1190-1:1982 Part 1: Designation of materials
  • ISO 1190-2:1982 Part 2: Designation of tempers
• ISO 1191:1975 Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number [Withdrawn: replaced with ISO 1628-3]
• ISO 1193:1973 Butter triers [Withdrawn: replaced with ISO 707]
• ISO 1194:1973 Cheese triers [Withdrawn: replaced with ISO 707]
• ISO/R 1195:1970 Plastics — Determination of the water vapour transmission rate of plastics films and thin sheets — Dish method [Withdrawn without replacement]
• ISO 1198:1972 Sealed-beam landing lamps for aircraft — Dimensions
• ISO/R 1200:1971 Cinematography — Labelling of containers for unexposed motion-picture films and magnetic films — Minimum information specifications [Withdrawn: replaced with ISO 3042]
• ISO 1201:1972 Cinematography — 8 mm motion-picture film with picture — Location and width of magnetic striping and gaps of recording and reproducing magnetic heads for magnetic sound record [Withdrawn without replacement]
• ISO 1202:1981 Essential oils — Determination of 1,8-cineole content [Withdrawn without replacement]
• ISO 1203:1998 Photography — Roll film cameras — Back window location
• ISO 1204:1990 Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine
• ISO 1205:1972 Reciprocating internal combustion engines — Designation of the cylinders [Withdrawn: replaced with ISO 1204]
• ISO 1206:2018 Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
• ISO 1207:2011 Slotted cheese head screws — Product grade A
• ISO 1208:1982 Spices and condiments — Determination of filth
• ISO 1209 Rigid cellular plastics — Determination of flexural properties
  • ISO 1209-1:2007 Part 1: Basic bending test
  • ISO 1209-2:2007 Part 2: Determination of flexural strength and apparent flexural modulus of elasticity
• ISO 1210:1992 Plastics — Determination of the burning behaviour of horizontal and vertical specimens in contact with a small-flame ignition source [Withdrawn: replaced with IEC 60695-11-10]
• ISO 1211:2010 Milk — Determination of fat content — Gravimetric method (Reference method)
• ISO 1212:1995 Apples — Cold storage
• ISO 1213 Solid mineral fuels – Vocabulary
  • ISO 1213-1:2020 Part 1: Terms relating to coal preparation
  • ISO 1213-2:2016 Part 2: Terms relating to sampling, testing and analysis
  • ISO/R 1213-3 Vocabulary of terms relating to solid mineral fuels — Part 3: Terms relating to coke [Withdrawn: replaced with ISO 1213-2]
• ISO/R 1214:1971 Counterbalanced fork lift trucks — Rated capacity [Withdrawn without replacement]
• ISO 1215:2015 Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, corkwaste, boiled cork pieces and raw corkwaste — Definitions and packaging
• ISO 1216:2017 Boiled reproduction cork — Grading, classification and packing
• ISO 1217:2009 Displacement compressors—Acceptance tests
• ISO 1218:1975 Plastics — Polyamides — Determination of "melting point" [Withdrawn: replaced with ISO 3146]
• ISO 1219 Fluid power systems and components – Graphical symbols and circuit diagrams
  • ISO 1219-1:2012 Part 1: Graphical symbols for conventional use and data-processing applications
  • ISO 1219-2:2012 Part 2: Circuit diagrams
  • ISO 1219-3:2016 Part 3: Symbol modules and connected symbols in circuit diagrams
• ISO/R 1220:1970 Methods of test for heat-resisting (190 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
• ISO 1222 Photography – Tripod connections
• ISO 1223:2003 Cinematography — Picture areas for motion-picture films for television — Position and dimensions
• ISO 1224 Rolling bearings — Instrument precision bearings
  • ISO 1224-1:2007 Part 1: Boundary dimensions, tolerances and characteristics of metric series bearings [Withdrawn without replacement]
  • ISO 1224-2:2007 Part 2: Boundary dimensions, tolerances and characteristics of inch series bearings [Withdrawn without replacement]
• ISO/R 1225 was merged into ISO/R 1224.
• ISO/R 1226:1970 Symbolic designation of direction of closing and faces of doors, windows and shutters [Withdrawn without replacement]
• ISO 1227:1979 Starch, including derivatives and by-products — Vocabulary [Withdrawn without replacement]
• ISO 1228:1975 Plastics — Poly(ethylene terephthalate) in dilute solution — Determination of viscosity number [Withdrawn: replaced with ISO 1628-5]
• ISO 1229:1989 Photography — Expendable photoflash lamps — Determination of light output [Withdrawn without replacement]
• ISO 1230:2007 Photography — Determination of flash guide numbers for electronic flash equipment
• ISO/R 1231:1970 Seat belt assemblies for motorists [Withdrawn without replacement]
• ISO 1232:1976 Aluminium oxide primarily used for the production of aluminium — Determination of silica content — Reduced molybdosilicate spectrophotometric method [Withdrawn without replacement]
• ISO 1233:1975 Plastics ��� Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution [Withdrawn: replaced with ISO 1628-6]
• ISO 1234:1997 Split pins
• ISO 1237:1981 Mustard seed — Specification
• ISO 1241:1996 Essential oils — Determination of ester values, before and after acetylation, and evaluation of the contents of free and total alcohols
• ISO 1242:1999 Essential oils — Determination of acid value
• ISO 1247 Aluminium pigments for paints
  • ISO 1247-1:2021 Part 1: General aluminium pigments
  • ISO 1247-2:2021 Part 2: Vacuum metallized aluminium pigments
• ISO 1248:2006 Iron oxide pigments — Specifications and methods of test
• ISO 1249:1974 Zinc chromate pigments — Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments
• ISO 1250:1972 Mineral solvents for paints — White spirits and related hydrocarbon solvents
• ISO/R 1260:1970 Guide to the use of ISO/R 390 "Sampling and inspection of asbestos-cement products" [Withdrawn: replaced with ISO 390]
• ISO 1264:1980 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of pH of aqueous extract
• ISO 1265:2007 Plastics — Poly(vinyl chloride) resins — Determination of number of impurities and foreign particles
• ISO 1268 Fibre-reinforced plastics – Methods of producing test plates
• ISO 1269:2006 Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of volatile matter (including water)
• ISO 1270:1975 Plastics — PVC resins — Determination of ash and sulphated ash [Withdrawn: replaced with ISO 3451-5]
• ISO 1271:1983 Essential oils — Determination of carbonyl value — Free hydroxylamine method
• ISO 1272:2000 Essential oils — Determination of content of phenols
• ISO 1275:2006 Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors
• ISO 1279:1996 Essential oils — Determination of carbonyl value — Potentiometric methods using hydroxylammonium chloride
• ISO/TR 1281 Rolling bearings — Explanatory notes on ISO 281
  • ISO/TR 1281-1:2021 Part 1: Basic dynamic load rating and basic rating life
  • ISO/TR 1281-2:2008 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses
• ISO/R 1283 Brown coals and lignites — Determination of ash [Draft numbered ISO 1016]
• ISO 1288:2016 Glass in building — Determination of the bending strength of glass
  • ISO 1288-1:2016 Part 1: Fundamentals of testing glass
  • ISO 1288-2:2016 Part 2: Coaxial double-ring test on flat specimens with large test surface areas
  • ISO 1288-3:2016 Part 3: Test with specimen supported at two points (four point bending)
  • ISO 1288-4:2016 Part 4: Testing of channel shaped glass
  • ISO 1288-5:2016 Part 5: Coaxial double ring test on flat specimens with small test surface areas
• ISO/R 1291 Pesticides — Common names — Ninth series of terms [Draft numbered ISO/R 967]
• ISO/R 1292 Pesticides — Common names — Eleventh series of terms [Draft numbered ISO/R 969]
• ISO/R 1295:1970 Paper vocabulary — Fifth series of terms [Withdrawn: Replaced with ISO 4046]
• ISO 1302:2002 Geometrical Product Specifications (GPS) – Indication of surface texture in technical product documentation [Withdrawn: Replaced with ISO 21920-1]
• ISO 1304:2016 Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number
• ISO 1306:1995 Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density
• ISO 1307:2006 Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
• ISO 1310:1974 Carbon black for use in the rubber industry — Sampling packaged shipments [Withdrawn: Replaced with ISO 1124]
• ISO/R 1311 Shipbuilding details — Mating dimensions for pipeline flanges for ships [Draft numbered ISO/R 964]
• ISO/R 1312 Pesticides — Common names — Twelfth series of terms [Draft numbered ISO/R 970]
• ISO/R 1313 Pesticides — Common names — Thirteenth series of terms [Draft numbered ISO/R 971]
• ISO 1324:1985 Solid wood parquet — Classification of oak strips
• ISO 1325:1973 Plastics — Determination of electrical properties of thin sheet and film [Withdrawn without replacement]
• ISO/R 1326:1970 Plastics — Determination of flammability and burning rate of plastics in the form of film [Withdrawn: Replaced with ISO 9773]
• ISO 1328 Cylindrical gears — ISO system of flank tolerance classification
  • ISO 1328-1:2013 Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth
  • ISO 1328-2:2020 Part 2: Definitions and allowable values of double flank radial composite deviations
• ISO/R 1330:1970 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters [Withdrawn: replaced with ISO 3606, now ISO 11922-(1-2)]
• ISO/DIS 1331, 1332, and 1333 became ISO/R 1164, 1165, and 1166, respectively, meaning these numbers are unused.
• ISO 1336:1980 Wrought coppers (having minimum copper contents of 97,5 %) — Chemical composition and forms of wrought products [Withdrawn without replacement]
• ISO 1337:1980 Wrought coppers (having minimum copper contents of 99,85 %) — Chemical composition and forms of wrought products [Withdrawn without replacement]
• ISO 1338:1977 Cast copper alloys — Composition and mechanical properties [Withdrawn without replacement]
• ISO 1340:1976 Cylindrical gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required [Withdrawn without replacement]
• ISO 1341:1976 Straight bevel gears — Information to be given to the manufacturer by the purchaser in order to obtain the gear required [Withdrawn without replacement]
• ISO 1342:2012 Essential oil of rosemary (Rosmarinus officinalis L.)
• ISO 1346:2021 Fibre ropes — Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high-tenacity multifilament (PP3) — 3-, 4-, 8- and 12-strand ropes
• ISO 1352:2021 Metallic materials — Torque-controlled fatigue testing
• ISO/R 1353 Metallic materials — Hardness test — Rockwell superficial test (scales 15N, 30N, 45N, 15T, 30T and 45T) [Draft numbered ISO 1024]
• ISO 1355:1989 Metallic materials — Hardness test — Calibration of standardized blocks to be used for Rockwell superficial hardness testing machines (scales 15N, 30N, 45N, 15T, 30T and 45T) [Withdrawn: replaced with ISO 6508-3]
• ISO/R 1359 Heat-treated steels, alloy steels and free-cutting steels - Part 4: Wrought, quenched, and tempered steels with 1 % chromium and 0.2 % molybdenum and controlled sulphur content [Renamed ISO/R 683-4]
• ISO/R 1360 Heat-treated steels, alloy steels and free-cutting steels - Part 5: Wrought quenched and tempered manganese steels [Draft renamed ISO/R 683-5]
• ISO 1361:1997 Light-gauge metal containers — Round open-top cans — Internal diameters
• ISO/R 1362 Heat-treated steels, alloy steels and free-cutting steels - Part 7: Wrought quenched and tempered chromium steels [Draft renamed ISO/R 683-7]
• ISO/R 1364 Heat-treated steels, alloy steels and free-cutting steels - Part 9: Wrought free-cutting steels [Draft renamed ISO/R 683-9]
• ISO/R 1366 Heat-treated steels, alloy steels and free-cutting steels - Part 11: Wrought case hardening steels [Draft renamed ISO/R 683-11]
• ISO/R 1376 Railway rolling stock material - Rough tyres for trailer stock Dimensions and tolerances [Draft renamed ISO/R 1005-2]
• ISO/R 1378 Railway rolling stock material - Rolled or forged wheel centres for tyred wheels for trailer stock [Draft renamed ISO/R 1005-4]
• ISO/R 1379 Railway rolling stock material - Cast wheel centres in non-alloy steel for tyred wheels for trailer stock [Draft renamed ISO/R 1005-5]
• ISO 1382:2020 Rubber – Vocabulary
• ISO 1385 Phthalate esters for industrial use — Methods of test
• ISO 1385-1:1977 Part 1: General
• ISO 1385-2:1977 Part 2: Measurement of colour after heat treatment (Diallyl phthalate excluded) [Withdrawn without replacement]
• ISO 1385-3:1977 Part 3: Determination of ash [Withdrawn without replacement]
• ISO 1385-4:1977 Part 4: Titrimetric method [Withdrawn without replacement]
• ISO 1385-5:1977 Part 5: Determination of ester content — Titrimetric method after saponification [Withdrawn without replacement]
• ISO 1386:1983 Solvent acetates for industrial use — Methods of test [Withdrawn without replacement]
• ISO 1387:1982 Methanol for industrial use — Methods of test [Withdrawn without replacement]
• ISO 1388 Ethanol for industrial use — Methods of test
  • ISO 1388-1:1981 Part 1: General
  • ISO 1388-2:1981 Part 2: Detection of alkalinity or determination of acidity to phenolphthalein
  • ISO 1388-3:1981 Part 3: Estimation of content of carbonyl compounds present in small amounts — Photometric method
  • ISO 1388-4:1981 Part 4: Estimation of content of carbonyl compounds present in moderate amounts — Titrimetric method
  • ISO 1388-5:1981 Part 5: Determination of aldehydes content — Visual colorimetric method
  • ISO 1388-6:1981 Part 6: Test for miscibility with water
  • ISO 1388-7:1981 Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)) — Photometric method
  • ISO 1388-8:1981 Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)) — Visual colorimetric method
  • ISO 1388-9:1981 Part 9: Determination of esters content — Titrimetric method after saponification
  • ISO 1388-10:1981 Part 10: Estimation of hydrocarbons content — Distillation method
  • ISO 1388-11:1981 Part 11: Test for detection of furfural
  • ISO 1388-12:1981 Part 12: Determination of permanganate time
• ISO 1389 Phthalic anhydride for industrial use — Methods of test
  • ISO 1389-1:1977 Part 1: General [Withdrawn without replacement]
  • ISO 1389-2:1977 Part 2: Measurement of colour of the molten material [Withdrawn without replacement]
  • ISO 1389-3:1977 Part 3: Measurement of colour stability [Withdrawn without replacement]
  • ISO 1389-4:1977 Part 4: Measurement of colour after treatment with sulphuric acid [Withdrawn without replacement]
  • ISO 1389-5:1977 Part 5: Determination of free acidity — Potentiometric method [Withdrawn without replacement]
  • ISO 1389-6:1977 Part 6: Determination of phthalic anhydride content — Titrimetric method [Withdrawn without replacement]
  • ISO 1389-7:1977 Part 7: Determination of maleic anhydride content — Polarographic method [Withdrawn without replacement]
  • ISO 1389-8:1977 Part 8: Determination of ash [Withdrawn without replacement]
  • ISO 1389-9:1977 Part 9: Determination of impurities oxidizable in the cold by potassium permanganate — Iodometric method [Withdrawn without replacement]
  • ISO 1389-10:1977 Part 10: Determination of 1,4- naphthaquinone content — Colorimetric method [Withdrawn without replacement]
  • ISO 1389-11:1977 Part 11: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
• ISO 1390 Maleic anhydride for industrial use — Methods of test
  • ISO 1390-1:1977 Part 1: General [Withdrawn without replacement]
  • ISO 1390-2:1977 Part 2: Measurement of colour of the molten material [Withdrawn without replacement]
  • ISO 1390-3:1977 Part 3: Determination of free acidity — Potentiometric method [Withdrawn without replacement]
  • ISO 1390-4:1977 Part 4: Determination of maleic anhydride content — Polarographic method [Withdrawn without replacement]
  • ISO 1390-5:1977 Part 5: Determination of ash [Withdrawn without replacement]
  • ISO 1390-6:1977 Part 6: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
• ISO 1391 Paraformaldehyde for industrial use — Methods of test
  • ISO 1391-1:1976 Part 1: General [Withdrawn without replacement]
  • ISO 1391-2:1976 Part 2: Determination of ash [Withdrawn without replacement]
  • ISO 1391-3:1976 Part 3: Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
  • ISO 1391-4:1976 Part 4: Determination of water-insoluble matter [Withdrawn without replacement]
• ISO 1392:1977 Determination of crystallizing point — General method
• ISO 1393:1977 Liquid halogenated hydrocarbons for industrial use — Determination of acidity — Titrimetric method [Withdrawn without replacement]
• ISO 1394:1977 Liquid halogenated hydrocarbons for industrial use — Determination of cloud point [Withdrawn without replacement]
• ISO 1395:1977 Short pitch transmission precision bush chains and chain wheels [Withdrawn without replacement]
• ISO 1396:1975 Vulcanized and unvulcanized compounded rubber — Determination of copper content — Zinc diethyldithiocarbamate photometric method [Withdrawn: replaced with ISO 8053]
• ISO 1397:1975 Compounded rubber — Determination of manganese content — Sodium periodate photometric method​ [Withdrawn: replaced with ISO 7780]
• ISO/R 1398:1970 Rubber seals — Joint rings in asbestos-cement water piping [Withdrawn: replaced with ISO 4633]
• ISO 1399:1982 Rubber, vulcanized — Determination of permeability to gases — Constant volume method [Withdrawn: replaced with ISO 2782]
• ISO 1400:1975 Vulcanized rubbers of high hardness (85 to 100 IRHD) — Determination of hardness [Withdrawn: replaced with ISO 48, now ISO 48-2]
• ISO 1401:2016 Rubber hoses for agricultural spraying
• ISO 1402:2021 Rubber and plastics hoses and hose assemblies – Hydrostatic testing
• ISO 1403:2019 Rubber hoses, textile-reinforced, for general-purpose water applications — Specification
• ISO/R 1404:1970 Industrial air hose [Withdrawn: replaced with ISO 2398]
• ISO 1407:2011 Rubber — Determination of solvent extract
• ISO 1408:1995 Rubber — Determination of carbon black content — Pyrolytic and chemical degradation methods
• ISO 1409:2020 Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of surface tension
• ISO 1413:2016 Horology – Shock-resistant wrist watches
• ISO/TR 1417:1974 Automobiles — Anchorages for seat belts [Withdrawn without replacement]
• ISO 1419:2019 Rubber- or plastics-coated fabrics — Accelerated-ageing tests
• ISO 1420:2016 Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water
• ISO 1421:2016 Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
• ISO/R 1428:1971 Fire-refined high-conductivity tough pitch copper refinery shapes [Withdrawn: replaced with ISO 431]
• ISO/R 1429:1971 Fire-refined tough pitch copper refinery shapes [Withdrawn: replaced with ISO 431]
• ISO/R 1430:1971 Phosphorus-deoxidized copper — Refinery shapes [Withdrawn: replaced with ISO 431]
• ISO 1431 Rubber, vulcanized or thermoplastic — Resistance to ozone cracking
  • ISO 1431-1:2012 Part 1: Static and dynamic strain testing
  • ISO 1431-2:1994 Part 2: Dynamic strain test [Withdrawn: replaced with ISO 1431-1]
  • ISO 1431-3:2017 Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers
• ISO 1432:2021 Rubber, vulcanized or thermoplastic — Determination of low-temperature stiffening (Gehman test)
• ISO 1433:1995 Rubber, vulcanized — Preferred gradations of properties [Withdrawn without replacement]
• ISO 1434:2016 Natural rubber in bales — Amount of bale coating — Determination
• ISO 1435:1996 Rubber compounding ingredients — Carbon black (pelletized) — Determination of fines content
• ISO 1436:2020 Rubber hoses and hose assemblies — Wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification
• ISO 1437:2017 Rubber compounding ingredients — Carbon black — Determination of sieve residue
• ISO 1438:2017 Hydrometry – Open channel flow measurement using thin-plate weirs
• ISO/R 1439 Refractory arch bricks — Dimensions [Draft numbered ISO/R 1145]
• ISO 1440 Pyrometric reference cones for laboratory use – Specification [Draft numbered ISO/R 1146]
• ISO 1442:1997 Meat and meat products — Determination of moisture content (Reference method)
• ISO 1443:1973 Meat and meat products — Determination of total fat content
• ISO 1444:1996 Meat and meat products — Determination of free fat content
• ISO 1446:2001 Green coffee — Determination of water content — Basic reference method
• ISO 1447:1978 Green coffee — Determination of moisture content (Routine method) [Withdrawn without replacement]
• ISO 1452 Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U)
  • ISO 1452-1:2009 Part 1: General
  • ISO 1452-2:2009 Part 2: Pipes
  • ISO 1452-3:2009 Part 3: Fittings
  • ISO 1452-4:2009 Part 4: Valves
  • ISO 1452-5:2009 Part 5: Fitness for purpose of the system
• ISO/R 1453 Adding machines and calculating machines — Numeric section of ten-key keyboards [Draft numbered ISO/R 1092]
• ISO/R 1454 Adding machines and calculating machines — Keytop and printed or displayed symbols [Draft numbered ISO/R 1093]
• ISO/R 1455:1969 Adding machines and calculating machines — Classification [Draft numbered ISO/R 1094]
• ISO 1456:2009 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
• ISO 1457:1974 Metallic coatings — Electroplated coatings of copper plus nickel plus chromium on iron or steel [Withdrawn: replaced with ISO 1456]
• ISO 1458:2002 Metallic coatings — Electrodeposited coatings of nickel [Withdrawn: replaced with ISO 1456]
• ISO 1459:1973 Metallic coatings — Protection against corrosion by hot dip galvanizing — Guiding principles [Withdrawn: replaced with ISO 1461]
• ISO 1460:2020 Metallic coatings — Hot dip galvanized coatings on ferrous materials — Gravimetric determination of the mass per unit area
• ISO 1461:2009 Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods
• ISO 1462:1973 Metallic coatings — Coatings other than those anodic to the basis metal — Accelerated corrosion tests — Method for the evaluation of the results [Withdrawn: replaced with ISO 10289]
• ISO 1463:2021 Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
• ISO 1464:2018 Aerospace — Tripod jacks — Clearance dimensions
• ISO 1465:1989 Aircraft — Liquid oxygen replenishment couplings — Mating dimensions
• ISO 1466:1973 Lever-operated manual switches for aircraft — Performance requirements
• ISO 1467:1973 General purpose push-pull single-pole circuit-breakers for aircraft — Performance requirements
• ISO/R 1468:1970 Methods of test for general purpose electrical cables with aluminium or aluminium alloy conductors for aircraft [Withdrawn without replacement]
• ISO/R 1469:1969 Finishes with the external screw thread for glass containers and gauges for inspection of screw closures [Draft numbered ISO 1115]
• ISO 1472:1977 Textile machinery and accessories — Cylindrical tubes for draw-twisters — Dimensions and permissible run-out [Withdrawn without replacement]
• ISO 1478:1999 Tapping screws thread
• ISO 1479:2011 Hexagon head tapping screws
• ISO/R 1480:1970 Hexagon head tapping screws — Inch series [Withdrawn without replacement]
• ISO 1481:2011 Slotted pan head tapping screws
• ISO 1482:2011 Slotted countersunk (flat) head tapping screws
• ISO 1483:2011 Slotted raised countersunk (oval) head tapping screws
• ISO/R 1488 Dimensions of elastometric toroidal sealing rings for pipe-fittings in aircraft (Inch series - Class 1 tolerances) [Draft numbered ISO/R 1077]
• ISO/R 1489 Dimensions of elastometric toroidal sealing rings for aircraft (Inch series - Class 1 tolerances) [Draft numbered ISO/R 1078]
• ISO/R 1490:1970 Performance requirements for heat-resisting (260 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
• ISO/R 1491:1970 Methods of test for heat-resisting (260 °C) electrical cables with copper conductors for aircraft [Withdrawn without replacement]
• ISO/R 1494 Steel tubes — Butt-welding bends 5D (90° and 180°) [Draft numbered ISO/R 1128]
• ISO 1496 Series 1 freight containers — Specification and testing
  • ISO 1496-1:2013 Part 1: General cargo containers for general purposes
  • ISO 1496-2:2018 Part 2: Thermal containers
  • ISO 1496-3:2019 Part 3: Tank containers for liquids, gases and pressurized dry bulk
  • ISO 1496-4:1991 Part 4: Non-pressurized containers for dry bulk
  • ISO 1496-5:2018 Part 5: Platform and platform-based containers

ISO 1500 – ISO 1999[]

• ISO 1501:2009 ISO miniature screw threads
• ISO 1502:1996 ISO general-purpose metric screw threads – Gauges and gauging
• ISO 1503:2008 Spatial orientation and direction of movement — Ergonomic requirements
• ISO 1505:1993 Textile machinery — Widths relating to dyeing and finishing machines — Definitions and range of nominal widths
• ISO 1506:1982 Textile machinery – Dyeing, finishing and allied machinery – Classification and nomenclature [Withdrawn without replacement]
• ISO/R 1508 Pesticides — Common names — Fourteenth series of terms [Draft numbered ISO/R 1062]
• ISO 1509:1973 General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements
• ISO/R 1511:1970 Protective helmets for road users [Withdrawn without replacement]
• ISO 1512:1991 Paints and varnishes — Sampling of products in liquid or paste form [Withdrawn: replaced with ISO 15528]
• ISO 1513:2010 Paints and varnishes — Examination and preparation of test samples
• ISO 1514:2016 Paints and varnishes — Standard panels for testing
• ISO 1515:1973 Paints and varnishes — Determination of volatile and non-volatile matter [Withdrawn: replaced with ISO 3251]
• ISO 1516:2002 Determination of flash/no flash — Closed cup equilibrium method
• ISO 1517:1973 Paints and varnishes — Surface-drying test — Ballotini method [Withdrawn: replaced with ISO 9117-3]
• ISO 1518 Paints and varnishes — Determination of scratch resistance
  • ISO 1518-1:2019 Part 1: Constant-loading method
  • ISO 1518-2:2019 Part 2: Variable-loading method
• ISO 1519:2011 Paints and varnishes — Bend test (cylindrical mandrel)
• ISO 1520:2006 Paints and varnishes — Cupping test
• ISO 1521:1973 Paints and varnishes — Determination of resistance to water — Water immersion method [Withdrawn: replaced with ISO 2812-2]
• ISO 1522:2006 Paints and varnishes — Pendulum damping test
• ISO 1523:2002 Determination of flash point — Closed cup equilibrium method
• ISO 1524:2020 Paints, varnishes and printing inks — Determination of fineness of grind
• ISO 1530:2003 Fishing nets — Description and designation of knotted netting
• ISO 1531:1973 Fishing nets – Hanging of netting – Basic terms and definitions
• ISO 1532:1973 Fishing nets – Cutting knotted netting to shape ("tapering")
• ISO/R 1534:1970 Protective helmets for motor motorists' set belts with retractors [Withdrawn without replacement]
• ISO 1535:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belts
• ISO 1536:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Belt pulleys
• ISO 1537:1975 Continuous mechanical handling equipment for loose bulk materials — Troughed belt conveyors (other than portable conveyors) — Idlers
• ISO 1538:1984 Programming languages – ALGOL 60
• ISO/IEC 1539 Information technology – Programming languages – Fortran
  • ISO/IEC 1539-1:2018 Part 1: Base language
  • ISO/IEC 1539-2:2000 Part 2: Varying length character strings
  • ISO/IEC 1539-3:1999 Part 3: Conditional compilation [Withdrawn without replacement]
• ISO 1540:2006 Aerospace — Characteristics of aircraft electrical systems
• ISO/R 1542:1971 Nomenclature of terms used in the benzole industry- Part I [Withdrawn: replaced with ISO 1543, now withdrawn without replacement]
• ISO 1543:1981 Benzole industry — Vocabulary [Withdrawn without replacement]
• ISO 1546:1981 Procedure for milk recording for cows [Withdrawn without replacement]
• ISO 1547:1975 Aircraft — Precision fuse-links — General requirements
• ISO 1548:1976 Aircraft — Precision fuse-links — Type A
• ISO 1549:1976 Aircraft — Precision fuse-links — Type B
• ISO 1550:1973 Potassium hydroxide for industrial use — Determination of sodium content — Flame emission spectrophotometric method
• ISO/R 1551:1970 Potassium hydroxide for industrial use — Determination of sodium content — Gravimetric method using uranyl acetate and magnesium acetate [Withdrawn without replacement]
• ISO 1552:1976 Liquid chlorine for industrial use — Method of sampling (for determining only the volumetric chlorine content)
• ISO 1553:1976 Unalloyed copper containing not less than 99,90 % of copper — Determination of copper content — Electrolytic method [Withdrawn without replacement]
• ISO 1554:1976 Wrought and cast copper alloys — Determination of copper content — Electrolytic method
• ISO/R 1555:1971 Copper and copper alloy rolled flat products (thickness less than 2,5 mm (0.1 in)) — Tensile test [Withdrawn: replaced with ISO 6892-1]
• ISO/R 1556:1971 Copper and copper alloy tubes of circular section — Flattening Test [Withdrawn: replaced with ISO 8492]
• ISO 1559:1995 Dental materials — Alloys for dental amalgam [Withdrawn: replaced with ISO 24234]
• ISO 1560:1985 Dental mercury [Withdrawn: replaced with ISO 24234]
• ISO 1561:1995 Dental casting wax [Withdrawn: replaced with ISO 15854]
• ISO 1562:2004 Dentistry — Casting gold alloys [Withdrawn: replaced with ISO 22674]
• ISO 1563:1990 Dental alginate impression material [Withdrawn: replaced with ISO 21563]
• ISO 1564:1995 Dental aqueous impression materials based on agar [Withdrawn: replaced with ISO 21563]
• ISO 1565:1978 Dental silicate cement (hand mixed) [Withdrawn: replaced with ISO 9917]
• ISO 1566:1978 Dental zinc phosphate cement [Withdrawn: replaced with ISO 9917]
• ISO 1567:1999 Dentistry — Denture base polymers [Withdrawn: replaced with ISO 20795-1]
• ISO 1570:1975 Zinc and zinc alloys — Determination of tin content — Spectrophotometric method [Withdrawn without replacement]
• ISO/R 1571:1970 Shanks for pneumatic tools and fitting dimensions of chuck bushings — Part II
• ISO 1572:1980 Tea — Preparation of ground sample of known dry matter content
• ISO 1573:1980 Tea — Determination of loss in mass at 103 degrees C
• ISO 1574:1980 Tea — Determination of water extract [Withdrawn: replaced with ISO 9768]
• ISO 1575:1987 Tea — Determination of total ash
• ISO 1576:1988 Tea — Determination of water-soluble ash and water-insoluble ash
• ISO 1577:1987 Tea — Determination of acid-insoluble ash
• ISO 1578:1975 Tea — Determination of alkalinity of water-soluble ash
• ISO 1580:2011 Slotted pan head screws — Product grade A
• ISO 1585:2020 Road vehicles — Engine test code — Net power
• ISO 1586:1977 Textile machinery and accessories – Shuttles – Terms and designation in relation to the position of the shuttle eye
• ISO 1587:1975 Gypsum rock for the manufacture of binders — Specifications [Withdrawn without replacement]
• ISO/R 1588:1971 Binders based on calcium sulphate — Definitions, classification, and nomenclature [Withdrawn without replacement]
• ISO/R 1589 Rivet shank diameters [Draft numbered ISO 1051]
• ISO 1592:1977 Urea for industrial use — Determination of nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
• ISO 1593:1977 Urea for industrial use — Determination of alkalinity — Titrimetric method [Withdrawn without replacement]
• ISO 1594:1977 Urea for industrial use — Determination of ash
• ISO/R 1595:1970 Urea for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method
• ISO 1597:1994 Plastics — Unplasticized cellulose acetate — Determination of acetic acid yield [Withdrawn without replacement]
• ISO 1598:1990 Plastics - Cellulose acetate — Determination of insoluble particles
• ISO 1599:1990 Plastics — Cellulose acetate — Determination of viscosity loss on moulding
• ISO 1600:1990 Plastics — Cellulose acetate — Determination of light absorption on moulded specimens produced using different periods of heating
• ISO 1604:1989 Belt drives — Endless wide V-belts for industrial speed-changers and groove profiles for corresponding pulleys
• ISO 1607 Positive-displacement vacuum pumps — Measurement of performance characteristics
  • ISO 1607-1:1993 Part 1: Measurement of volume rate of flow (pumping speed) [Withdrawn: replaced with ISO 21360-2]
  • ISO 1607-2:1989 Part 2: Measurement of ultimate pressure [Withdrawn: replaced with ISO 21360-2]
• ISO 1608 Vapour vacuum pumps — Measurement of performance characteristics
  • ISO 1608-1:1993 Part 1: Measurement of volume rate of flow (pumping speed)
  • ISO 1608-2:1989 Part 2: Measurement of critical backing pressure
• ISO 1609:2020 Vacuum technology — Dimensions of non-knife edge flanges
• ISO 1614:1976 Glycerines for industrial use — Samples and test methods — General [Withdrawn without replacement]
• ISO 1615:1976 Glycerines for industrial use — Determination of alkalinity or acidity — Titrimetric method [Withdrawn without replacement]
• ISO 1616:1976 Glycerines for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
• ISO 1617:1976 Aluminium oxide primarily used for the production of aluminium — Determination of sodium content — Flame emission spectrophotometric method [Withdrawn without replacement]
• ISO 1618:1976 Aluminium oxide primarily used for the production of aluminium — Determination of vanadium content — N-Benzoyl-N-phenylhydroxylamine photometric method [Withdrawn without replacement]
• ISO 1619:1976 Cryolite, natural and artificial — Preparation and storage of test samples
• ISO 1620:1976 Cryolite, natural and artificial — Determination of silica content — Reduced molybdosilicate spectrophotometric method
• ISO 1622 Plastics — Polystyrene (PS) moulding and extrusion materials
  • ISO 1622-1:2012 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24022-1]
  • ISO 1622-2:1995 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 24022-2]
• ISO 1624:2001 Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis in water
• ISO 1625:1998 Plastics — Polymer dispersions — Determination of non-volatile matter (residue) at specified temperatures [Withdrawn: replaced with ISO 3251]
• ISO/R 1627:1970 Plastics — Method of test to determine the change in electrical properties of polyethylene due to the migration of plasticizers [Withdrawn without replacement]
• ISO 1628 Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers
  • ISO 1628-1:2021 Part 1: General principles
  • ISO 1628-2:2020 Part 2: Poly(vinyl chloride) resins
  • ISO 1628-3:2010 Part 3: Polyethylenes and polypropylenes
  • ISO 1628-4:1999 Part 4: Polycarbonate (PC) moulding and extrusion materials
  • ISO 1628-5:1998 Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
  • ISO 1628-6:1990 Part 6: Methyl methacrylate polymers
• ISO 1629:2013 Rubber and latices – Nomenclature
• ISO 1634 Wrought copper and copper alloy plate, sheet and strip
  • ISO 1634-1:1987 Part 1: Technical conditions of delivery for plate, sheet and strip for general purposes [Withdrawn without replacement]
  • ISO 1634-2:1987 Part 2: Technical conditions of delivery for plate and sheet for boilers, pressure vessels and heat-exchangers [Withdrawn without replacement]
  • ISO 1634-3:1987 Part 3: Technical conditions of delivery for wrought copper alloy strip for springs [Withdrawn without replacement]
• ISO 1635:1974 Wrought copper and copper alloys — Round tubes for general purposes — Mechanical properties [Withdrawn without replacement]
• ISO 1637:1987 Wrought copper and copper alloy rod and bar — Technical conditions of delivery [Withdrawn without replacement]
• ISO 1638:1987 Wrought copper and copper alloy wire — Technical conditions of delivery [Withdrawn without replacement]
• ISO 1639:1974 Wrought copper alloys — Extruded sections — Mechanical properties [Withdrawn without replacement]
• ISO 1640:1974 Wrought copper alloys — Forgings — Mechanical properties [Withdrawn without replacement]
• ISO 1641 End mills and slot drills
• ISO 1641-1:2016 Part 1: Milling cutters with cylindrical shanks
• ISO 1641-2:2011 Part 2: Dimensions and designation of milling cutters with Morse taper shanks
• ISO 1641-3:2011 Part 3: Dimensions and designation of milling cutters with 7/24 taper shanks
• ISO 1642:1987 Plastics — Industrial laminated sheets based on thermosetting resins — Specification [Withdrawn without replacement]
• ISO/R 1646:1970 Rolling bearings — Double row self-aligning ball bearings — Radial internal clearance [Withdrawn: replaced with ISO 5753]
• ISO/R 1648:1971 Rolling bearings — Radial bearings with shields or seals — Outside diameter tolerances — Normal tolerance class and tolerance class 6 [Withdrawn: Replaced with ISO 492]
• ISO 1651:1974 Tube drawing mandrels
• ISO 1652:2011 Rubber latex — Determination of apparent viscosity by the Brookfield test method
• ISO 1653:1975 Vulcanized rubbers — Determination of compression set under constant deflection at low temperatures [Withdrawn: replaced with ISO 815, later ISO 815-(1-2)]
• ISO/R 1654:1971 Raw rubber and rubber latex — Determination of copper [Withdrawn: replaced with ISO 8053]
• ISO 1655:1975 Raw rubber and rubber latex — Determination of manganese content — Potassium periodate photometric method [Withdrawn: replaced with ISO 7780]
• ISO 1656:2019 Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content
• ISO 1657:1986 Rubber, raw and rubber latex — Determination of iron content — 1,10-Phenanthroline photometric method
• ISO 1658:2015 Natural rubber (NR) — Evaluation procedure
• ISO/R 1659 Layout of multilingual classified vocabularies [Draft numbered ISO/R 1149]
• ISO 1660:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Profile tolerancing
• ISO/R 1661:1971 Technical drawings – Tolerances of form and position – Part IV: Practical examples of indications on drawings. [Withdrawn without replacement]
• ISO/R 1662:1971 Refrigerating plants — Safety requirements [Withdrawn: replaced with ISO 5149, later ISO 5149-(1-4)]
• ISO 1663:2007 Rigid cellular plastics – Determination of water vapour transmission properties
• ISO 1666:1996 Starch — Determination of moisture content — Oven-drying method
• ISO/TR 1672:1977 Hardware representation of ALGOL basic symbols in the ISO 7- bit coded character set for information processing interchange [Withdrawn without replacement]
• ISO 1673:1991 Onions — Guide to storage
• ISO 1675:1985 Plastics — Liquid resins — Determination of density by the pyknometer method
• ISO 1677:1977 Sealed radioactive sources — General [Withdrawn: replaced with ISO 2919]
• ISO 1679:1973 Data processing — Implementation of the ISO 7- bit coded character set on punched cards [Withdrawn: replaced with ISO 6586]
• ISO 1680:2013 Acoustics – Test code for the measurement of airborne noise emitted by rotating electrical machines
• ISO 1681:1973 Information processing – Unpunched paper cards – Specification
• ISO 1682:1973 Information processing — 80 columns punched paper cards — Dimensions and location of rectangular punched holes [Withdrawn without replacement]
• ISO 1683:2015 Acoustics – Preferred reference values for acoustical and vibratory levels
• ISO 1684:1975 Wire, bar and tube drawing dies — Specifications
• ISO/R 1685:1971 Shipbuilding details — Multi-purpose chocks of cast steel [Withdrawn without replacement]
• ISO 1686:1976 Sodium and potassium silicates for industrial use — Samples and methods of test — General
• ISO 1687:1976 Sodium and potassium silicates for industrial use — Determination of density at 20 degrees C of products in solution — Method using density hydrometer and method using pyknometer [Withdrawn without replacement]
• ISO 1688:1976 Sodium and potassium silicates for industrial use — Determination of dry matter — Gravimetric method [Withdrawn without replacement]
• ISO 1689:1976 Sodium and potassium silicates for industrial use — Calculation of the ratio : silicon dioxide/sodium oxide or silicon dioxide/potassium oxide
• ISO 1690:1976 Sodium and potassium silicates for industrial use — Determination of silica content — Gravimetric method by insolubilization
• ISO 1691:1976 Sodium and potassium silicates for industrial use — Determination of carbonates content — Gas-volumetric method
• ISO 1692:1976 Sodium and potassium silicates for industrial use — Determination of total alkalinity — Titrimetric method
• ISO 1693:1976 Cryolite, natural and artificial — Determination of fluorine content — Modified Willard-Winter method
• ISO 1694:1976 Cryolite, natural and artificial — Determination of iron content — 1,10- Phenanthroline photometric method
• ISO 1695:1977 o-Chlorotoluene for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 1696:1977 p-Chlorotoluene for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 1697:1977 Chlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 1698:1977 o-Dichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 1699:1977 P-Dichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 1700:1988 Cinematography — 8 mm Type S motion-picture raw stock film — Cutting and perforating dimensions
• ISO 1701 Test conditions for milling machines with table of variable height — Testing of the accuracy
  • ISO 1701-0:1984 Part 0: General introduction [Withdrawn: replaced with ISO 1701-1 and ISO 1701-2]
  • ISO 1701-1:2004 Part 1: Machines with horizontal spindle
  • ISO 1701-2:2004 Part 2: Machines with vertical spindle
• ISO 1703:2005 Assembly tools for screws and nuts – Designation and nomenclature
• ISO 1704:2008 Ships and marine technology — Stud-link anchor chains
• ISO/R 1707:1970 Formic acid for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn: replaced with ISO 731-6, now withdrawn without replacement]
• ISO 1708:1989 Acceptance conditions for general purpose parallel lathes — Testing of the accuracy
• ISO 1709:2018 Nuclear energy — Fissile materials — Principles of criticality safety in storing, handling and processing
• ISO/R 1710:1970 Fundamental principles for protection in the design and construction of installations for work on unsealed radioactive materials [Withdrawn without replacement]
• ISO 1711 Assembly tools for screws and nuts — Technical specifications
• ISO 1711-1:2019 Part 1: Hand-operated wrenches and sockets
• ISO 1711-2:2019 Part 2: Machine-operated sockets (impact)
• ISO/R 1713:1970 Restraining devices for children in motor vehicles
• ISO 1716:2018 Reaction to fire tests for products — Determination of the gross heat of combustion (calorific value)
• ISO 1717:1974 Rock drilling — Rotary drill-rods and rotary drill-bits for dry drilling — Connecting dimensions
• ISO 1718:1991 Rock drilling equipment — Drill rods with tapered connection for percussive drilling
• ISO 1719:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 7/8 to 1 1/4 in (22 to 32 mm) [Withdrawn: replaced with ISO 10207 and ISO 10208]
• ISO 1720:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Rope-threaded equipments 1 1/2 to 2 in (38 to 51 mm) [Withdrawn: replaced with ISO 10207 and ISO 10208]
• ISO 1721:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)
• ISO 1722:1974 Rock drilling — Extension drill-steel equipment for percussive long-hole drilling — Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm)
• ISO 1724:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage
• ISO 1726 Road vehicles — Mechanical coupling between tractors and semi-trailers
• ISO 1726-1:2000 Part 1: Interchangeability between tractors and semi-trailers for general cargo
• ISO 1726-2:2007 Part 2: Interchangeability between low-coupling tractors and high-volume semi-trailers
• ISO 1726-3:2010 Part 3: Requirements for semi-trailer contact area to fifth wheel
• ISO/R 1727:1970 Pressures in brake lines and braking efficiency [Draft numbered ISO 1186]
• ISO 1728:2006 Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability
• ISO 1729:1973 Information processing — Unpunched paper tape — Specification [Withdrawn without replacement]
• ISO 1730:1980 Dictation equipment – Basic operating requirements
• ISO/R 1731:1971 Dictation equipment – Classification
• ISO 1736:2008 Dried milk and dried milk products — Determination of fat content — Gravimetric method (Reference method)
• ISO 1737:2008 Evaporated milk and sweetened condensed milk — Determination of fat content — Gravimetric method (Reference method)
• ISO 1738:2004 Butter — Determination of salt content
• ISO 1739:2006 Butter — Determination of the refractive index of the fat (Reference method)
• ISO 1740:2004 Milkfat products and butter — Determination of fat acidity (Reference method)
• ISO 1741:1980 Dextrose — Determination of loss in mass on drying — Vacuum oven method
• ISO 1742:1980 Glucose syrups — Determination of dry matter — Vacuum oven method
• ISO 1743:1982 Glucose syrup — Determination of dry matter content — Refractive index method
• ISO 1745:1975 Information processing – Basic mode control procedures for data communication systems
• ISO 1746:1998 Rubber or plastics hoses and tubing — Bending tests [Withdrawn: replaced with ISO 10619-1]
• ISO 1747:1976 Rubber, vulcanized — Determination of adhesion to rigid plates in shear — Quadruple shear method [Withdrawn: replaced with ISO 1827]
• ISO/R 1748 Shipbuilding details – Wrought aluminium alloys for use in shipbuilding [Draft numbered ISO/R 1156]
• ISO 1749:1973 Aircraft — Elastomeric sealing rings — Packaging and identification [Withdrawn without replacement]
• ISO 1750:1981 Pesticides and other agrochemicals – Common names
• ISO 1751:2012 Ships and marine technology — Ships' side scuttles
• ISO 1753:1975 Cinematography — Recording and reproducing head gaps for six-track magnetic sound records on 35 mm motion-picture film containing no picture — Positions and width dimensions [Withdrawn: replaced with ISO 162]
• ISO 1754:2010 Photography — Cameras using 35 mm film and roll film — Dimensions of picture sizes
• ISO 1755:1987 Photography — Projector slides — Dimensions
• ISO 1756:1975 Industrial trucks — Dimensions of stillages — Connection gauge
• ISO 1757:1996 Personal photographic dosemeters [Withdrawn without replacement]
• ISO 1758:1976 Direct-reading electroscope-type pocket exposure meters [Withdrawn: replaced with ISO 11934, now withdrawn without replacement]
• ISO 1759:1976 Indirect-reading capacitor-type pocket exposure meters and accessory electrometers [Withdrawn: replaced with ISO 11934, now withdrawn without replacement]
• ISO/R 1761:1970 Acoustics — Procedure for describing aircraft noise heard on the ground using spectral analysis [Withdrawn: replaced with ISO 3891, now withdrawn without replacement]
• ISO 1762:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 525 °C
• ISO 1763:2020 Textile floor coverings — Determination of number of tufts and/or loops per unit length and per unit area
• ISO 1764:1975 Textile floor coverings — Determination of mass per unit area of machine made textile floor coverings [Withdrawn: replaced with ISO 8543]
• ISO 1765:1986 Machine-made textile floor coverings — Determination of thickness
• ISO 1766:1999 Textile floor coverings — Determination of thickness of pile above the substrate
• ISO/R 1767:1971 Rubber — Determination of rebound resilience of vulcanizates [Withdrawn: replaced with ISO 4662]
• ISO 1768:1975 Glass hydrometers – Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)
• ISO 1769:1975 Laboratory glassware – Pipettes – Colour coding
• ISO 1770:1981 Solid-stem general purpose thermometers
• ISO 1771:1981 Enclosed-scale general purpose thermometers
• ISO 1772:1975 Laboratory crucibles in porcelain and silica
• ISO 1773:1997 Laboratory glassware — Narrow-necked boiling flasks
• ISO 1775:1975 Porcelain laboratory apparatus — Requirements and methods of test
• ISO 1776:1985 Glass — Resistance to attack by hydrochloric acid at 100 degrees C — Flame emission or flame atomic absorption spectrometric method
• ISO 1780:1984 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model I — Aperture, camera aperture profile, film position, pressure pad and pressure pad flatness — Dimensions and specifications
• ISO 1781:1983 Cinematography — Projector usage of 8 mm Type S motion-picture film for direct front projection
• ISO 1783:1973 Magnesium alloys — Determination of zinc — Volumetric method
• ISO 1784:1976 Aluminium alloys — Determination of zinc — EDTA titrimetric method
• ISO 1785:1983 Cinematography — Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type S (1-4) — Position and dimensions
• ISO/R 1786:1970 Statistics — Vocabulary and symbols — Second series [Withdrawn: replaced with ISO 3534]
• ISO 1787:1984 Cinematography — Camera usage of 8 mm Type S motion-picture film — Specifications
• ISO 1788 Specification for compostable plastics [Rejected draft]
• ISO 1789:1983 Building construction — Modular co-ordination — Storey heights and room heights for residential buildings [Withdrawn: replaced with ISO 6512, now replaced with ISO 21723]
• ISO/R 1790:1970 Building construction – Modular co-ordination – Reference lines of horizontal controlling co-ordinating dimensions [Withdrawn: replaced with ISO 2848]
• ISO 1791:1983 Building construction – Modular co-ordination – Vocabulary [Withdrawn: replaced with ISO 6707-1]
• ISO 1793:2005 Cinematography — Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) — Dimensions
• ISO/R 1794:1971 Cellular plastics and rubbers — Determination of linear dimensions [Withdrawn: replaced with ISO 1923]
• ISO 1795:2017 Rubber, raw natural and raw synthetic — Sampling and further preparative procedures
• ISO 1796:1982 Rubber, raw — Sample preparation [Withdrawn: replaced with ISO 1795]
• ISO 1797:2017 Dentistry — Shanks for rotary and oscillating instruments
• ISO 1798:2008 Flexible cellular polymeric materials — Determination of tensile strength and elongation at break
• ISO/R 1799:1971 Dimensions of elastomeric toroidal sealing rings for pipe-fittings in aircraft [Withdrawn without replacement]
• ISO/R 1800:1971 Dimensions of elastomeric toroidal sealing rings for aircraft [Withdrawn without replacement]
• ISO 1802:1992 Natural rubber latex concentrate — Determination of boric acid content
• ISO 1803:1997 Building construction – Tolerances – Expression of dimensional accuracy – Principles and terminology [Withdrawn: replaced with ISO 6707-1]
• ISO 1804:1972 Doors – Terminology [Withdrawn: replaced with ISO 22496]
• ISO 1805:2006 Fishing nets — Determination of breaking force and knot breaking force of netting yarns
• ISO 1806:2002 Fishing nets — Determination of mesh breaking force of netting
• ISO 1807:1975 Continuous mechanical handling equipment for loose bulk materials — Oscillating conveyors and shaking or reciprocating feeders with rectangular or trapezoidal trough
• ISO 1809:1977 Textile machinery and accessories – Types of formers for yarn packages – Nomenclature
• ISO 1810:1976 Copper alloys — Determination of nickel (low contents) — Dimethylglyoxime spectrophotometric method [Withdrawn without replacement]
• ISO 1811 Copper and copper alloys — Selection and preparation of samples for chemical analysis
  • ISO 1811-1:1988 Part 1: Sampling of cast unwrought products
  • ISO 1811-2:1988 Part 2: Sampling of wrought products and castings
• ISO 1812:1976 Copper alloys — Determination of iron content — 1,10- Phenanthroline spectrophotometric method
• ISO 1813:2014 Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test
• ISO 1815:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating feeders and conveyors with tubular trough
• ISO 1816:1975 Continuous mechanical handling equipment for loose bulk materials and unit loads — Belt conveyors — Basic characteristics of motorized driving pulleys
• ISO 1817:2015 Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
• ISO 1818:1975 Vulcanized rubbers of low hardness (10 to 35 IRHD) — Determination of hardness [Withdrawn: replaced with ISO 48, now ISO 48-2]
• ISO 1819:1977 Continuous mechanical handling equipment — Safety code — General rules
• ISO 1820:1975 Continuous mechanical handling equipment for loose bulk materials — Storage equipment : Storage bins and bunkers, silos and hoppers, bin gates — Safety code [Withdrawn: replaced with ISO 8456]
• ISO 1821:1975 Continuous mechanical handling equipment for loose bulk materials — Belt feeders and conveyors — Safety code [Withdrawn: replaced with ISO 8456]
• ISO 1822:1973 Wool — Determination of fibre length using a single-fibre length-measuring machine [Withdrawn: replaced with ISO 6989]
• ISO 1823:2015 Rubber hose and hose assemblies for oil suction and discharge service — Specification
• ISO 1825:2017 Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling — Specification
• ISO 1826:1981 Rubber, vulcanized — Time-interval between vulcanization and testing — Specification [Withdrawn: replaced with ISO 471, and later ISO 23529]
• ISO 1827:2016 Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods
• ISO 1828:2012 Health informatics – Categorial structure for terminological systems of surgical procedures
• ISO 1829:1975 Selection of tolerance zones for general purposes [Withdrawn: replaced with ISO 286-1]
• ISO 1830:2005 Paper, board and pulps — Determination of acid-soluble manganese [Withdrawn: replaced with ISO 12830]
• ISO 1831:1980 Printing specifications for optical character recognition
• ISO 1832:2017 Indexable inserts for cutting tools — Designation
• ISO 1833 Textiles — Quantitative chemical analysis
  • ISO 1833-1:2020 Part 1: General principles of testing
  • ISO 1833-2:2020 Part 2: Ternary fibre mixtures
  • ISO 1833-3:2019 Part 3: Mixtures of acetate with certain other fibres (method using acetone)
  • ISO 1833-4:2017 Part 4: Mixtures of certain protein fibres with certain other fibres (method using hypochlorite)
  • ISO 1833-5:2006 Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
  • ISO 1833-6:2018 Part 6: Mixtures of viscose, certain types of cupro, modal or lyocell with certain other fibres (method using formic acid and zinc chloride)
  • ISO 1833-7:2017 Part 7: Mixtures of polyamide with certain other fibres (method using formic acid)
  • ISO 1833-8:2006 Part 8: Part 5: Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)
  • ISO 1833-9:2019 Part 9: Mixtures of acetate with certain other fibres (method using benzyl alcohol)
  • ISO 1833-10:2019 Part 10: Mixtures of triacetate or polylactide with certain other fibres (method using dichloromethane)
  • ISO 1833-11:2017 Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid)
  • ISO 1833-12:2020 Part 12: Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres with certain other fibres (method using dimethylformamide)
  • ISO 1833-13:2019 Part 13: Mixtures of certain chlorofibres with certain other fibres (method using carbon disulfide/acetone)
  • ISO 1833-14:2019 Part 14: Mixtures of acetate with certain other fibres (method using glacial acetic acid)
  • ISO 1833-15:2019 Part 15: Mixtures of jute with certain animal fibres (method by determining nitrogen content)
  • ISO 1833-16:2019 Part 16: Mixtures of polypropylene fibres with certain other fibres (method using xylene)
  • ISO 1833-17:2019 Part 17: Mixtures of cellulose fibres and certain fibres with chlorofibres and certain other fibres (method using concentrated sulfuric acid)
  • ISO 1833-18:2019 Part 18: Mixtures of silk with other protein fibres (method using sulfuric acid)
  • ISO 1833-19:2006 Part 19: Mixtures of cellulose fibres and asbestos (method by heating)
  • ISO 1833-20:2018 Part 20: Mixtures of elastane with certain other fibres (method using dimethylacetamide)
  • ISO 1833-21:2019 Part 21: Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates with certain other fibres (method using cyclohexanone)
  • ISO 1833-22:2020 Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride)
  • ISO 1833-24:2010 Part 24: Mixtures of polyester and certain other fibres (method using phenol and tetrachloroethane)
  • ISO 1833-25:2020 Part 25: Mixtures of polyester with certain other fibres (method using trichloroacetic acid and chloroform)
  • ISO 1833-26:2020 Part 26: Mixtures of melamine with certain other fibres (method using hot formic acid)
  • ISO 1833-27:2018 Part 27: Mixtures of cellulose fibres with certain other fibres (method using aluminium sulfate)
  • ISO 1833-28:2019 Part 28: Mixtures of chitosan with certain other fibres (method using diluted acetic acid)
  • ISO 1833-29:2020 Part 29: Mixtures of polyamide with polypropylene/polyamide bicomponent (method using sulfuric acid)
• ISO 1834:1999 Short link chain for lifting purposes — General conditions of acceptance
• ISO 1835:2018 Round steel short link chains for lifting purposes — Medium tolerance sling chains — Grade 4, stainless steel
• ISO 1836:1980 Short link chain for lifting purposes — Grade M (4), calibrated, for chain hoists and other lifting appliances [Withdrawn without replacement]
• ISO 1837:2003 Lifting hooks – Nomenclature
• ISO 1838:1993 Fresh pineapples — Storage and transport
• ISO 1839:1980 Tea — Sampling
• ISO 1840:1976 Definitions of living animals for slaughter — Porcines [Withdrawn without replacement]
• ISO 1841 Meat and meat products — Determination of chloride content
  • ISO 1841-1:1996 Part 1: Volhard method
  • ISO 1841-2:1996 Part 2: Potentiometric method
• ISO 1842:1991 Fruit and vegetable products — Determination of pH
• ISO 1843 Higher alcohols for industrial use — Methods of test (ISO/R 1843:1970 was Higher alcohols for industrial use — measurement of colour in Hazen units)
• ISO 1843-1:1977 Part 1: General [Withdrawn without replacement]
• ISO 1843-2:1977 Part 2: Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn without replacement]
• ISO 1843-3:1977 Part 3: Determination of carbonyl compounds content — Potentiometric method [Withdrawn without replacement]
• ISO 1843-4:1977 Part 4: Determination of bromine number — Titrimetric method in the presence of mercury(II) chloride [Withdrawn without replacement]
• ISO 1843-5:1977 Part 5: Determination of total alcohols content — Titrimetric method [Withdrawn without replacement]
• ISO 1843-6:1977 Part 6: Determination of ash [Withdrawn without replacement]
• ISO 1843-7:1982 Part 7: Determination of distillation yield [Withdrawn without replacement]
• ISO 1843-8:1982 Part 8: Sulphuric acid colour test [Withdrawn without replacement]
• ISO/R 1844:1970 Higher alcohols for industrial use — Determination of density at 20 degrees C [Withdrawn: replaced with ISO 1843-1, now withdrawn without replacement]
• ISO/R 1845:1970 Higher alcohols for industrial use — Determination of distillation yield [Withdrawn: replaced with ISO 1843-7, now withdrawn without replacement]
• ISO/R 1846:1970 Higher alcohols for industrial use — Determination of acidity to phenolphthalein — Titrimetric method [Withdrawn: replaced with ISO 1843-2, now withdrawn without replacement]
• ISO/R 1847:1970 Higher alcohols for industrial use — Determination of carbonyl compounds content — Potentiometric method [Withdrawn: replaced with ISO 1843-3, now withdrawn without replacement]
• ISO/R 1848:1970 Higher alcohols for industrial use — Determination of bromine number — Titrimetric method in the presence of mercury(II) chloride [Withdrawn: replaced with ISO 1843-4, now withdrawn without replacement]
• ISO/R 1849:1970 Higher alcohols for industrial use — Determination of water content by the Karl Fischer method [Withdrawn: replaced with ISO 1843-1, now withdrawn without replacement]
• ISO/R 1850:1970 Higher alcohols for industrial use — Determination of total alcohols content — Titrimetric method [Withdrawn: replaced with ISO 1843-5, now withdrawn without replacement]
• ISO/R 1851:1970 Higher alcohols for industrial use — Determination of ash [Withdrawn: replaced with ISO 1843-6, now withdrawn without replacement]
• ISO/R 1852:1970 Higher alcohols for industrial use — Sulphuric acid colour test [Withdrawn: replaced with ISO 1843-8, now withdrawn without replacement]
• ISO 1853:2018 Conducting and dissipative rubbers, vulcanized or thermoplastic — Measurement of resistivity
• ISO 1854:2008 Whey cheese — Determination of fat content — Gravimetric method (Reference method)
• ISO/R 1855:1975 Cellular rubbers – Determination of apparent density [Withdrawn: replaced with ISO 845]
• ISO 1856:2018 Flexible cellular polymeric materials — Determination of compression set
• ISO 1858:1977 Information processing – General purpose hubs and reels, with 76 mm (3 in) centrehole, for magnetic tape used in interchange instrumentation applications
• ISO 1859:1973 Information processing – Unrecorded magnetic tapes for interchange instrumentation applications – General dimensional requirements
• ISO 1860:1986 Information processing – Precision reels for magnetic tape used in interchange instrumentation applications
• ISO 1861:1975 Information processing – 7- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) [Withdrawn without replacement]
• ISO 1862:1975 Information processing – 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 8 rpmm (200 rpi) [Withdrawn without replacement]
• ISO/IEC 1863:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using NRZ1 at 32 ftpmm (800 ftpi) – 32 cpmm (800 cpi)
• ISO/IEC 1864:1992 Information technology – Unrecorded 12,7 mm (0,5 in) wide magnetic tape for information interchange – 32 ftpmm (800 ftpi), NRZ1, 126 ftpmm (3 200 ftpi) phase encoded and 356 ftpmm (9 042 ftpi), NRZ1
• ISO 1865:1977 Textile machinery and accessories — Serrated bars for mechanical warp stop motions — Designations of dimensions, and dimensions of cross-section
• ISO 1866:1975 Pelletized carbon black for use in the rubber industry delivered in bulk or in bins — Specification for maximum fines content [Withdrawn without replacement]
• ISO 1867:1975 Carbon black for use in the rubber industry — Specification for sieve residue [Withdrawn without replacement]
• ISO 1868:1982 Rubber compounding ingredients — Carbon black — Specification limits for loss on heating [Withdrawn without replacement]
• ISO 1869:1977 Methylene chloride for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 1870:1977 Chloroform for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 1871:1979 Food and feed products — General guidelines for the determination of nitrogen by the Kjeldahl method
• ISO 1872 Plastics — Polyethylene (PE) moulding and extrusion materials
• ISO 1872-1:1993 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 17855-1]
• ISO 1872-2:2007 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 17855-2]
• ISO 1873 Plastics — Polypropylene (PP) moulding and extrusion materials
• ISO 1873-1:1995 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 19069-1]
• ISO 1873-2:2007 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 19069-2]
• ISO 1874 Plastics — Polyamide (PA) moulding and extrusion materials
• ISO 1874-1:2010 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 16396-1]
• ISO 1874-2:2012 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 16396-2]
• ISO 1875:1982 Plastics — Plasticized cellulose acetate — Determination of matter extractable by diethyl ether
• ISO 1876 Swing doors — Dimensioning rules [Rejected draft]^[4]
• ISO 1877 Single-leaf wooden swing doors — Principal dimensions [Rejected draft]^[4]
• ISO 1878:1983 Classification of instruments and devices for measurement and evaluation of the geometrical parameters of surface finish [Withdrawn without replacement]
• ISO 1879:1981 Instruments for the measurement of surface roughness by the profile method — Vocabulary [Withdrawn without replacement]
• ISO 1880:1979 Instruments for the measurement of surface roughness by the profile method — Contact (stylus) instruments of progressive profile transformation — Profile recording instruments [Withdrawn: replaced with ISO 3274]
• ISO 1881:1973 Coke not greater than 60 mm top size — Determination of mechanical strength
• ISO/R 1882 Vocabulary of terms relating to solid mineral fuels — Part 2: Terms relating to coal sampling and analysis [Draft named ISO/R 1223-2]
• ISO/R 1883 Vocabulary of terms relating to solid mineral fuels — Part 3: Terms relating to coke [Draft named ISO/R 1223-3]
• ISO 1886:1990 Reinforcement fibres — Sampling plans applicable to received batches [Withdrawn without replacement]
• ISO 1887:2014 Textile glass — Determination of combustible-matter content
• ISO 1888:2022 Textile glass — Staple fibres or filaments — Determination of average diameter
• ISO 1889:2009 Reinforcement yarns — Determination of linear density
• ISO 1890:2009 Reinforcement yarns — Determination of twist
• ISO 1891:2009 Fasteners – Terminology
  • ISO 1891-2:2014 Part 2: Vocabulary and definitions for coatings
• ISO 1893:2007 Refractory products — Determination of refractoriness under load — Differential method with rising temperature
• ISO 1894:1979 General purpose Series 1 freight containers — Minimum internal dimensions [Withdrawn: Replaced with ISO 1496-1]
• ISO/TR 1896:1991 Products in fibre-reinforced cement — Non-combustible fibre-reinforced boards of calcium silicate or cement for insulation and fire protection [Withdrawn without replacement]
• ISO 1897:1977 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Methods of test (ISO/R 1897 was Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of water content by the Karl Fischer method)
  • ISO 1897-1:1977 Part 1: General [Withdrawn without replacement]
  • ISO 1897-2:1977 Part 2: Determination of water — Dean and Stark method [Withdrawn without replacement]
  • ISO 1897-3:1977 Part 3: Determination of neutral oils and pyridine bases [Withdrawn without replacement]
  • ISO 1897-4:1977 Part 4: Visual test for impurities insoluble in sodium hydroxide solution (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
  • ISO 1897-5:1977 Part 5: Visual test for impurities insoluble in water (Phenol only) [Withdrawn without replacement]
  • ISO 1897-6:1977 Part 6: Test for absence of hydrogen sulphide (Cresylic acid and xylenols only) [Withdrawn without replacement]
  • ISO 1897-7:1977 Part 7: Measurement of colour (Cresylic acid and xylenols only) [Withdrawn without replacement]
  • ISO 1897-8:1977 Part 8: Determination of o-cresol content (Cresylic acid and xylenols only) [Withdrawn without replacement]
  • ISO 1897-9:1977 Part 9: Determination of m-cresol content (Cresylic acid only) [Withdrawn without replacement]
  • ISO 1897-10:1982 Part 10: Determination of dry residue after evaporation on a water bath (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
  • ISO 1897-11:1983 Part 11: Determination of crystallizing point (Excluding cresylic acid and xylenols) [Withdrawn without replacement]
  • ISO 1897-12:1983 Part 12: Determination of distillation characteristics (Cresylic acid and xylenols only) [Withdrawn without replacement]
  • ISO 1897-13:1983 Part 13: Determination of residue on distillation (Cresylic acid and xylenols only) [Withdrawn without replacement]
  • ISO/R 1898:1971 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of water — Dean and Stark method [Withdrawn: Replaced with ISO 1897-2]
  • ISO/R 1899:1971 Phenol, o-cresol, m-cresol, p-cresol, cresylic acid and xylenols for industrial use — Determination of neutral oils and pyridine bases [Withdrawn: Replaced with ISO 1897-3]
  • ISO/R 1900:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Determination of dry residue after evaporation on a water bath [Withdrawn: Replaced with ISO 1897-10]
  • ISO/R 1901:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Determination of crystallizing point [Withdrawn: Replaced with ISO 1897-11]
  • ISO/R 1902:1971 Phenol, o-cresol, m-cresol, and p-cresol for industrial use — Visual test for impurities insoluble in sodium hydroxide solution [Withdrawn: Replaced with ISO 1897-4]
  • ISO/R 1903:1971 Phenol, m-cresol, cresylic acid and xylenols for industrial use — Determination of density at 20 degrees C [Withdrawn: Replaced with ISO 1897-1]
• ISO 1904:1972 Liquefied phenol for industrial use — Determination of phenols content — Bromination method [Withdrawn without replacement]
• ISO/R 1905:1971 Liquefied phenol for industrial use — Visual test for impurities insoluble in water [Withdrawn: Replaced with ISO 1897-5]
• ISO/R 1906:1971 Cresylic acid and xylenols for industrial use — Determination of distillation characteristics [Withdrawn: Replaced with ISO 1897-12]
• ISO/R 1907:1971 Cresylic acid and xylenols for industrial use — Determination of residue on distillation [Withdrawn: Replaced with ISO 1897-13]
• ISO/R 1908:1971 Cresylic acid and xylenols for industrial use — Test for absence of hydrogen sulphide [Withdrawn: Replaced with ISO 1897-6]
• ISO/R 1909:1971 Cresylic acid and xylenols for industrial use — Measurement of colour [Withdrawn: Replaced with ISO 1897-7]
• ISO/R 1910:1971 Cresylic acid and xylenols for industrial use — Determination of o-cresol content [Withdrawn: Replaced with ISO 1897-8]
• ISO/R 1911:1971 Cresylic acid for industrial use — Determination of crystallizing point [Withdrawn: Replaced with ISO 1897-9]
• ISO/R 1912:1971 Paper vocabulary — Sixth series of terms (Definition of optical properties) [Withdrawn: Replaced with ISO 4046]
• ISO/R 1913:1971 Formic acid for industrial use — Determination of low contents of other volatile acids — Titrimetric method after distillation [Withdrawn: replaced with ISO 731-7, now withdrawn without replacement]
• ISO 1914:1972 Boric acid for industrial use — Determination of boric acid content — Volumetric method [Withdrawn without replacement]
• ISO 1915:1972 Boric oxide for industrial use — Determination of boric oxide content — Volumetric method [Withdrawn without replacement]
• ISO 1916:1972 Disodium tetraborates for industrial use — Determination of sodium oxide and boric oxide contents and loss on ignition [Withdrawn without replacement]
• ISO 1917:1972 Hydrated sodium perborates for industrial use — Determination of sodium oxide, boric oxide and available oxygen contents — Volumetric methods [Withdrawn without replacement]
• ISO 1918:1972 Boric acid, boric oxide, disodium tetraborates and crude sodium borates for industrial use — Determination of sulphur compounds — Volumetric method [Withdrawn without replacement]
• ISO 1919:1998 Road vehicles — M14 x 1,25 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
• ISO 1920 Testing of concrete
• ISO 1920-1:2004 Part 1: Sampling of fresh concrete
• ISO 1920-2:2016 Part 2: Properties of fresh concrete
• ISO 1920-3:2019 Part 3: Making and curing test specimens
• ISO 1920-4:2020 Part 4: Strength of hardened concrete
• ISO 1920-5:2018 Part 5: Density and water penetration depth
• ISO 1920-6:2019 Part 6: Sampling, preparing and testing of concrete cores
• ISO 1920-7:2004 Part 7: Non-destructive tests on hardened concrete
• ISO 1920-8:2009 Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory
• ISO 1920-9:2009 Part 9: Determination of creep of concrete cylinders in compression
• ISO 1920-10:2010 Part 10: Determination of static modulus of elasticity in compression
• ISO 1920-11:2013 Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion
• ISO 1920-12:2015 Part 12: Determination of the carbonation resistance of concrete — Accelerated carbonation method
• ISO 1920-13:2018 Part 13: Properties of fresh self compacting concrete
• ISO 1920-14:2019 Part 14: Setting time of concrete mixtures by resistance to penetration
• ISO 1922:2018 Rigid cellular plastics — Determination of shear properties
• ISO 1923:1981 Cellular plastics and rubbers — Determination of linear dimensions
• ISO 1924 Paper and board — Determination of tensile properties
  • ISO 1924-1:1992 Part 1: Constant rate of loading method [Withdrawn without replacement]
  • ISO 1924-2:2008 Part 2: Constant rate of elongation method (20 mm/min)
  • ISO 1924-3:2005 Part 3: Constant rate of elongation method (100 mm/min)
• ISO 1925:2001 Mechanical vibration — Balancing — Vocabulary [Withdrawn: replaced with ISO 21940-2]
• ISO 1926:2009 Rigid cellular plastics — Determination of tensile properties
• ISO 1927 Monolithic (unshaped) refractory products
  • ISO 1927-1:2012 Part 1: Introduction and classification
  • ISO 1927-2:2012 Part 2: Sampling for testing
  • ISO 1927-3:2012 Part 3: Characterization as received
  • ISO 1927-4:2012 Part 4: Determination of consistency of castables
  • ISO 1927-5:2012 Part 5: Preparation and treatment of test pieces
  • ISO 1927-6:2012 Part 6: Measurement of physical properties
  • ISO 1927-7:2012 Part 7: Tests on pre-formed shapes
  • ISO 1927-8:2012 Part 8: Determination of complementary properties
• ISO 1928:2020 Coal and coke — Determination of gross calorific value
• ISO 1929:1993 Abrasive belts — Dimensions, tolerances and designation
• ISO 1938 Geometrical product specifications (GPS) – Dimensional measuring equipment
  • ISO 1938-1:2015 Part 1: Plain limit gauges of linear size
  • ISO 1938-2:2017 Part 2: Reference disk gauges
• ISO/R 1939:1970 Pneumatic cylinders – cylinder bores and port sizes [Withdrawn without replacement]
• ISO 1940 Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state
  • ISO 1940-1:2003 Part 1: Specification and verification of balance tolerances [Withdrawn: replaced with ISO 21940-11]
  • ISO 1940-2:1997 Part 2: Mechanical vibration — Balance quality requirements of rigid rotors — Part 2: Balance errors [Withdrawn: replaced with ISO 21940-14]
• ISO/R 1941:1970 Flat seal for hydraulic couplings [Withdrawn without replacement]
• ISO 1942:2020 Dentistry – Vocabulary
• ISO/R 1943:1970 Coupling Threads for Hydraulic or Pneumatic Piping [Withdrawn: replaced with ISO 1179-(1-4)]
• ISO/R 1944:1970 Pipe couplings for hydraulic piping (pipe threads) [Withdrawn without replacement]
• ISO 1946:1976 Textile machinery and accessories — Condenser bobbins for woollen spinning — Dimensions [Withdrawn without replacement]
• ISO 1947:1973 System of cone tolerances for conical workpieces from C = 1:3 to 1:500 and lengths from 6 to 630 mm [Withdrawn without replacement]
• ISO 1948:1987 Photography — Front lens barrels up to 127 mm — Dimensions important to the connection of auxiliaries
• ISO 1949:1987 Aircraft — Electrical connectors — Design requirements
• ISO 1950:1974 Aircraft — Identification of servicing, maintenance, ground handling and safety/hazard points [Withdrawn without replacement]
• ISO 1951:2007 Presentation/representation of entries in dictionaries – Requirements, recommendations and information
• ISO 1952:2008 Solid mineral fuels — Determination of extractable metals in dilute hydrochloric acid
• ISO 1953:2015 Hard coal — Size analysis by sieving
• ISO 1954:2013 Plywood — Tolerances on dimensions
• ISO 1955:1982 Citrus fruits and derived products — Determination of essential oils content (Reference method)
• ISO 1956 Fruits and vegetables – Morphological and structural terminology
  • ISO 1956-1:1982 (No part title)
  • ISO 1956-2:1989 (No part title)
• ISO 1957:2000 Machine-made textile floor coverings — Selection and cutting of specimens for physical tests
• ISO 1958:1973 Textile floor coverings — Determination of mass of total pile yarn per unit area [Withdrawn: replaced with ISO 8543]
• ISO 1959:1973 Textile floor coverings — Determination of measured surface pile density and measured pile fibre volume ratio [Withdrawn: replaced with ISO 8543]
• ISO 1963:1973 Aircraft — Interchangeability dimensions of battery connectors for automatic coupling [Withdrawn without replacement]
• ISO 1964:1987 Shipbuilding – Indication of details on the general arrangement plans of ships
• ISO 1965:1973 Aluminium terminal ends for crimping to aircraft aluminium electrical cables
• ISO 1966:1973 Crimped joints for aircraft electrical cables
• ISO 1967:1974 Aircraft — Fire-resisting electrical cables — Dimensions, conductor resistance and mass
• ISO 1968:2004 Fibre ropes and cordage – Vocabulary
• ISO 1969:2004 Fibre ropes — Polyethylene — 3- and 4-strand ropes
• ISO 1970:1973 Ropes and cordage — Eight-strand plaited manila and sisal ropes [Withdrawn without replacement]
• ISO 1971:1975 Aircraft — Accessory drives and mounting pads
• ISO 1973:2021 Textile fibres — Determination of linear density — Gravimetric method and vibroscope method
• ISO 1974:2012 Paper — Determination of tearing resistance — Elmendorf method
• ISO 1975:1973 Magnesium and magnesium alloys — Determination of silicon — Spectrophotometric method with the reduced silicomolybdic complex
• ISO 1976:1975 Zinc alloys — Determination of copper content — Electrolytic method [Withdrawn without replacement]
• ISO 1977:2006 Conveyor chains, attachments and sprockets
• ISO 1980:1977 Nitric acid for industrial use — Determination of total acidity — Titrimetric method [Withdrawn without replacement]
• ISO 1981:1977 Nitric acid for industrial use — Determination of nitrous compounds — Titrimetric method [Withdrawn without replacement]
• ISO/R 1982:1971 Nitric acid for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
• ISO 1983:1977 Nitric acid for industrial use — Determination of sulphated ash — Gravimetric method [Withdrawn without replacement]
• ISO 1984 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy
  • ISO 1984-1:2001 Part 1: Machines with horizontal spindle
  • ISO 1984-2:2001 Part 2: Machines with vertical spindle
• ISO 1985:2015 Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy
• ISO 1986 Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table — Testing of the accuracy
  • ISO 1986-1:2014 Part 1: Machines with table length of up to 1 600 mm
• ISO 1988:1975 Hard coal — Sampling [Withdrawn: replaced with ISO 18283]
• ISO/IEC 1989:2014 Information technology – Programming languages, their environments and system software interfaces – Programming language COBOL
• ISO 1990 Fruits – Nomenclature
  • ISO 1990-1:1982 First list
  • ISO 1990-2:1985 Second list
• ISO 1991 Vegetables – Nomenclature
  • ISO 1991-1:1982 First list
  • ISO 1991-2:1995 Part 2: Second list
• ISO 1992 Commercial refrigerated cabinets — Methods of test
  • ISO 1992-1:1974 Part 1: Calculation of linear dimensions, areas and volumes [Withdrawn without replacement]
  • ISO 1992-2:1973 Part 2: General test conditions [Withdrawn without replacement]
  • ISO 1992-3:1973 Part 3: Temperature test [Withdrawn without replacement]
  • ISO 1992-4:1974 Part 4: Defrosting test [Withdrawn without replacement]
  • ISO 1992-5:1974 Part 5: Water vapour condensation test [Withdrawn without replacement]
  • ISO 1992-6:1974 Part 6: Electrical energy consumption test [Withdrawn without replacement]
• ISO 1993 [Draft renamed ISO 1992-2]
• ISO 1994:1976 Hard coal — Determination of oxygen content [Withdrawn without replacement]
• ISO 1995:1981 Aromatic hydrocarbons — Sampling
• ISO 1996 Acoustics – Description, measurement and assessment of environmental noise
  • ISO 1996-1:2016 Part 1: Basic quantities and assessment procedures^[5]
  • ISO 1996-2:2017 Part 2: Determination of sound pressure levels
• ISO 1997:2018 Granulated cork and cork powder — Classification, properties and packing
• ISO 1998 Petroleum industry – Terminology
  • ISO 1998-1:1998 Part 1: Raw materials and products
  • ISO 1998-2:1998 Part 2: Properties and tests
  • ISO 1998-3:1998 Part 3: Exploration and production
  • ISO 1998-4:1998 Part 4: Refining
  • ISO 1998-5:1998 Part 5: Transport, storage, distribution
  • ISO 1998-6:2000 Part 6: Measurement
  • ISO 1998-7:1998 Part 7: Miscellaneous terms
  • ISO 1998–99:2000 Part 99: General and index
• ISO 1999:2013 Acoustics – Estimation of noise-induced hearing loss^[6]

ISO 2000 – ISO 2499[]

• ISO 2000:2020 Rubber, raw natural — Guidelines for the specification of technically specified rubber (TSR)
• ISO 2002:1975 Raw styrene-butadiene rubber (SBR) — Determination of organic acid content [Withdrawn: replaced with ISO 7781]
• ISO 2003:1975 Raw styrene-butadiene rubber (SBR) — Determination of soap content [Withdrawn: replaced with ISO 7781]
• ISO 2004:2017 Natural rubber latex concentrate — Centrifuged or creamed, ammonia-preserved types — Specifications
• ISO 2005:2014 Rubber latex, natural, concentrate — Determination of sludge content
• ISO 2006 Rubber latex, synthetic — Determination of mechanical stability
  • ISO 2006-1:2009 Part 1: High-speed method
  • ISO 2006-1:2009 Part 2: Moderate-speed method under load
• ISO 2007:2018 Rubber, unvulcanized — Determination of plasticity — Rapid-plastimeter method
• ISO 2008:1987 Rubber latex, styrene-butadiene — Determination of volatile unsaturates [Withdrawn without replacement]
• ISO 2009:2011 Slotted countersunk flat head screws — Product grade A
• ISO 2010:2011 Slotted raised countersunk head screws — Product grade A
• ISO 2011 Nuclear energy — Vocabulary — second list [draft incorporated into ISO 921]^[4]
• ISO 2012:1976 Textile machinery and accessories — Cone sectional warping machines — Maximum usable width
• ISO 2013:1983 Textile machinery and accessories — Beams — Method of measuring variations of form and position [Withdrawn: replaced with ISO 8116-8]
• ISO 2014:1976 Writing of calendar dates in all-numeric form [Withdrawn: replaced by ISO 8601:1988]
• ISO 2015:1976 Numbering of weeks [Withdrawn: replaced by ISO 8601:1988]
• ISO 2016:1981 Capillary solder fittings for copper tubes — Assembly dimensions and tests
• ISO 2017 Mechanical vibration and shock – Resilient mounting systems
  • ISO 2017-1:2005 Part 1: Technical information to be exchanged for the application of isolation systems
  • ISO 2017-2:2007 Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
  • ISO 2017-3:2015 Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
• ISO 2020 Aerospace — Preformed flexible steel wire rope for aircraft controls
  • ISO 2020-1:1997 Part 1: Dimensions and loads
  • ISO 2020-2:1997 Part 2: Technical specification
• ISO 2021:1975 Data processing — Implementation of the ISO 8- bit coded character sets on punched cards [Withdrawn: replaced with ISO 6586]
• ISO/IEC 2022:1994 Information technology – Character code structure and extension techniques
• ISO 2023:1994 Rubber footwear — Lined industrial vulcanized-rubber boots — Specification [Withdrawn: replaced with ISO 20344]
• ISO 2024:1981 Rubber footwear, lined conducting — Specification [Withdrawn without replacement]
• ISO 2025:1972 Lined industrial rubber boots with general purpose oil resistance [Withdrawn without replacement]
• ISO 2026:2020 Aircraft — Connections for starting engines by air
• ISO 2027:1990 Natural rubber latex concentrate, evaporated, preserved — Specification
• ISO 2028:2015 Synthetic rubber latex — Preparation of dry polymer
• ISO 2030:2018 Granulated cork — Size analysis by mechanical sieving
• ISO 2031:2015 Granulated cork — Determination of apparent bulk density
• ISO 2032:1973 Heat-resisting equipment wires for aircraft
• ISO 2033:1983 Information processing – Coding of machine readable characters (MICR and OCR)
• ISO 2035:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Pressure-resistance test [Withdrawn without replacement]
• ISO 2036:1976 Wood for manufacture of wood flooring — Symbols for marking according to species
• ISO 2037:1992 Stainless steel tubes for the food industry
• ISO 2039 Plastics — Determination of hardness
  • ISO 2039-1:2001 Part 1: Ball indentation method
  • ISO 2039-2:1987 Part 2: Rockwell hardness
  • ISO 2040:1972 Strontium chromate pigments for paints
• ISO 2041:2009 Mechanical vibration, shock and condition monitoring – Vocabulary
• ISO 2042:1973 Aircraft electrical circuit diagrams
• ISO 2043:1974 Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Oven test [Withdrawn: replaced with ISO 580]
• ISO 2044:1974 Unplasticized polyvinyl chloride (PVC) moulded solvent-welded socket fittings for use with pressure pipe — Hydraulic internal pressure test
• ISO 2045:1988 Single sockets for unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement [Withdrawn: replaced with ISO 1452-(2,3)]
• ISO 2046:1973 Gaseous breathing oxygen supplies for aircraft
• ISO 2047:1975 Information processing – Graphical representations for the control characters of the 7- bit coded character set
• ISO 2048:1990 Double-socket fittings for unplasticized poly(vinyl chloride) (PVC-U) pressure pipes with elastic sealing ring type joints — Minimum depths of engagement [Withdrawn: replaced with ISO 1452-3]
• ISO 2049:1996 Petroleum products — Determination of colour (ASTM scale)
• ISO 2050:1976 Potassium chloride for industrial use — Determination of potassium content — Flame emission spectrophotometric method [Withdrawn without replacement]
• ISO 2051:1976 Potassium chloride for industrial use — Determination of potassium content — Potassium tetraphenylborate gravimetric method [Withdrawn without replacement]
• ISO 2052:1976 Potassium chloride for industrial use — Determination of potassium content — Sodium tetraphenylborate titrimetric method [Withdrawn without replacement]
• ISO 2053:1976 Potassium chloride for industrial use — Determination of moisture content — Gravimetric method [Withdrawn without replacement]
• ISO 2056:1976 Moulded polyvinyl chloride (PVC) pipes and fittings — Determination of Vicat softening temperature [Withdrawn: replaced with ISO 2507, now ISO 2507-(1-2)]
• ISO 2057:1981 Agricultural tractors — Remote control hydraulic cylinders for trailed implements
• ISO 2058:1973 Raw styrene butadiene rubber (SBR) — Determination of volatile matter [Withdrawn: replaced with ISO 248]
• ISO 2059: Concrete and reinforced concrete — notation [Rejected draft]^[4]
• ISO 2060:1994 Textiles — Yarn from packages — Determination of linear density (mass per unit length) by the skein method
• ISO 2061:2015 Textiles — Determination of twist in yarns — Direct counting method
• ISO 2062:2009 Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
• ISO 2063 Thermal spraying — Zinc, aluminium and their alloys
  • ISO 2063-1:2019 Part 1: Design considerations and quality requirements for corrosion protection systems
  • ISO 2063-2:2017 Part 2: Execution of corrosion protection systems
• ISO 2064:1996 Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness
• ISO 2065:1972 Textile machinery and accessories — Cylindrical tubes for tape yarns [Withdrawn: replaced with ISO 3914-3]
• ISO 2066:2004 Resilient floor coverings — Determination of moisture content of agglomerated composition cork
• ISO 2067:2019 Granulated cork, broken cork and crushed cork — Sampling for the determination of moisture content
• ISO 2068:1972 Barium chromate pigments for paints
• ISO 2069:1976 Aluminium oxide primarily used for the production of aluminium — Determination of calcium content — Flame atomic absorption method [Withdrawn without replacement]
• ISO 2070:1997 Aluminium oxide primarily used for the production of aluminium — Determination of calcium content [Withdrawn without replacement]
• ISO 2071:1976 Aluminium oxide primarily used for the production of aluminium — Determination of zinc content — Flame atomic absorption method [Withdrawn without replacement]
• ISO 2072:1981 Aluminium oxide primarily used for the production of aluminium — Determination of zinc content — PAN photometric method [Withdrawn without replacement]
• ISO 2073:1976 Aluminium oxide primarily used for the production of aluminium — Preparation of solution for analysis — Method by hydrochloric acid attack under pressure [Withdrawn without replacement]
• ISO 2074:2007 Plywood – Vocabulary
• ISO 2075:1972 Cutting netting to shape — Determination of the cutting rate [Withdrawn without replacement]
• ISO 2076:2021 Textiles – Man-made fibres – Generic names
• ISO 2077:1979 Pure expanded corkboard — Determination of the modulus of rupture by bending [Withdrawn without replacement]
• ISO 2078:1993 Textile glass — Yarns — Designation
• ISO 2079:1981 Surface treatment and metallic coatings — General classification of terms [Withdrawn: replaced with ISO 2080]
• ISO 2080:2008 Metallic and other inorganic coatings – Surface treatment, metallic and other inorganic coatings – Vocabulary
• ISO 2081:2018 Metallic and other inorganic coatings — Electroplated coatings of zinc with supplementary treatments on iron or steel
• ISO 2082:2017 Metallic and other inorganic coatings — Electroplated coatings of cadmium with supplementary treatments on iron or steel
• ISO 2083:1973 Gasoline — Determination of lead content — Volumetric chromate method [Withdrawn without replacement]
• ISO 2084:1974 Pipeline flanges for general use — Metric series — Mating dimensions [Withdrawn: replaced with ISO 7005-(1-3)]
• ISO 2085:2018 Anodizing of aluminium and its alloys — Check for continuity of thin anodic oxidation coatings — Copper sulfate test
• ISO/R 2091:1971 Hydraulic cylinders — Internal diameters and piston rod diameters — Metric series [Withdrawn without replacement]
• ISO 2092:1981 Light metals and their alloys — Code of designation based on chemical symbols [Withdrawn without replacement]
• ISO 2093:1986 Electroplated coatings of tin — Specification and test methods
• ISO 2094:1999 Textile floor coverings — Determination of thickness loss under dynamic loading
• ISO 2095:1977 Textile floor coverings — Determination of mass of effective pile per unit area that can be shorn away from the substrate [Withdrawn: replaced with ISO 8543]
• ISO 2096:1972 Glycerols for industrial use — Methods of sampling
• ISO 2097:1972 Glycerols for industrial use — Determination of water content — Karl Fischer method [Withdrawn without replacement]
• ISO 2098:1972 Glycerols for industrial use — Determination of ash — Gravimetric method [Withdrawn without replacement]
• ISO 2099:1972 Purified glycerol for industrial use — Determination of density at 20 degrees C [Withdrawn without replacement]
• ISO 2100:1987 Aircraft — Electrical connectors — Tests
• ISO/R 2101:1971 Aluminium and aluminium alloys — Shear test for rivet wire and rivets [Withdrawn without replacement]
• ISO 2103:1986 Loads due to use and occupancy in residential and public buildings
• ISO/R 2105:1971 Textile machinery and accessories — Tubes for draw-winders for man-made fibres [Withdrawn: replaced with ISO 3914-3]
• ISO 2106:2019 Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method
• ISO 2107:2007 Aluminium and aluminium alloys — Wrought products — Temper designations
• ISO 2108:2005 Information and documentation – International standard book number (ISBN)
• ISO 2109:1975 Continuous mechanical handling equipment — Light duty belt conveyors for loose bulk materials
• ISO 2110:1989 Information technology – Data communication – 25-pole DTE/DCE interface connector and contact number assignments
• ISO 2111:1985 Data communication — Basic mode control procedures — Code independent information transfer [Withdrawn without replacement]
• ISO 2112:1990 Plastics — Aminoplastic moulding materials — Specification [Withdrawn: replaced with ISO 14527-(1-3) and ISO 14528-(1-3)]
• ISO 2113:1996 Reinforcement fibres — Woven fabrics — Basis for a specification
• ISO 2114:2000 Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value
• ISO 2115:1996 Plastics — Polymer dispersions — Determination of white point temperature and minimum film-forming temperature
• ISO 2117 Terms and symbols for flight dynamics — Part 1: aircraft motion relative to the air [Draft renamed ISO 1151-1]
• ISO 2119:1972 Magnesium-zinc-zirconium alloy castings — Chemical composition [Withdrawn: replaced with ISO 3115]
• ISO 2120:1972 Liquid chlorine for industrial use — Determination of the content of chlorine by volume in the vaporized product
• ISO 2121:1972 Liquid chlorine for industrial use — Determination of water content — Gravimetric method
• ISO 2122:1972 Sodium and potassium silicates for industrial use — Preparation of solution of products not easily soluble in boiling water and determination of matter insoluble in water
• ISO 2123:1972 Sodium and potassium silicates for industrial use — Determination of dynamic viscosity [Withdrawn without replacement]
• ISO 2124:1972 Sodium and potassium silicates for industrial use — Determination of silica content — Titrimetric method [Withdrawn without replacement]
• ISO 2125:1975 Continuous mechanical handling equipment for loose bulk materials — Vibrating feeders and conveyors, shaking or reciprocating feeders and oscillating conveyors — Safety code [Withdrawn: replaced with ISO 8456]
• ISO 2126:1975 Office machines — Basic arrangement for the alphanumeric section of keyboards operated with both hands [Withdrawn: replaced with ISO 9995-(1,7)]
• ISO 2128:2010 Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope
• ISO 2131:1972 Surface active agents — Simplified classification
• ISO 2132:1972 Offset duplicators — Attachment features of plates [Withdrawn without replacement]
• ISO 2133:1976 Stencils for duplicators — Minimum overprint and attachment features [Withdrawn without replacement]
• ISO 2135:2017 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
• ISO/TR 2136:1977 Wrought aluminium and aluminium alloys — Rolled products — Mechanical properties [Withdrawn: replaced with ISO 6361-2]
• ISO 2137:2020 Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum [Withdrawn without replacement]
• ISO 2139:1975 Continuous mechanical handling equipment for loose bulk materials — Oscillating conveyors and shaking or reciprocating feeders with tubular trough
• ISO 2140:1975 Continuous mechanical handling equipment for loose bulk materials — Apron conveyors
• ISO 2141:1972 Lifting hooks — General characteristics [Withdrawn without replacement]
• ISO 2142:1981 Wrought aluminium, magnesium and their alloys — Selection of specimens and test pieces for mechanical testing
• ISO 2143:2017 Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
• ISO 2144:2019 Paper, board, pulps and cellulose nanomaterials — Determination of residue (ash content) on ignition at 900 °C
• ISO 2145:1978 Documentation – Numbering of divisions and subdivisions in written documents
• ISO 2146:2010 Information and documentation – Registry services for libraries and related organizations
• ISO/R 2147:1971 Aluminium alloys — Sand cast test pieces — Mechanical properties [Withdrawn: replaced with ISO 3522]
• ISO 2148:1974 Continuous handling equipment – Nomenclature
• ISO 2149:1975 Continuous mechanical handling equipment for unit loads — Overhead monorail chain conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2150:1975 Continuous mechanical handling equipment for unit loads — Overhead twin rail chain conveyors (power and free) — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2151:2004 Acoustics – Noise test code for compressors and vacuum pumps – Engineering method (Grade 2)
• ISO 2155:1974 Aircraft — Fire-resisting electrical cables — Performance requirements
• ISO 2156:1974 Aircraft — Fire-resisting electrical cables — Methods of test
• ISO 2157:2016 Dentistry — Nominal diameters and designation code numbers for rotary instruments
• ISO 2160:1998 Petroleum products — Corrosiveness to copper — Copper strip test
• ISO 2161 UNJ threads for Aerospace-Inch Series [Rejected draft]^[7]
• ISO 2162 Technical product documentation – Springs
  • ISO 2162-1:1993 Part 1: Simplified representation
  • ISO 2162-2:1993 Part 2: Presentation of data for cylindrical helical compression springs
  • ISO 2162-3:1993 Part 3: Vocabulary [Withdrawn: replaced with ISO 26909]
• ISO 2163:1975 Industrial trucks — Wheels and castors — Vocabulary [Withdrawn: replaced with ISO 22877]
• ISO 2164:1975 Pulses — Determination of glycosidic hydrocyanic acid
• ISO 2165:1974 Ware potatoes — Guide to storage
• ISO 2166:1981 Carrots — Guide to storage
• ISO 2167:1991 Round-headed cabbage — Guide to cold storage and refrigerated transport
• ISO 2168:1974 Table grapes — Guide to cold storage
• ISO 2169:1981 Fruits and vegetables — Physical conditions in cold stores — Definitions and measurement
• ISO 2170:1980 Cereals and pulses — Sampling of milled products [Withdrawn: replaced with ISO 13690, later ISO 24333]
• ISO 2171:2007 Cereals, pulses and by-products – Determination of ash yield by incineration
• ISO 2172:1983 Fruit juice — Determination of soluble solids content — Pycnometric method
• ISO 2173:2003 Fruit and vegetable products — Determination of soluble solids — Refractometric method
• ISO 2174:1990 Surface active agents — Preparation of water with known calcium hardness
• ISO 2175:1981 Industrial wheels for non-powered equipment — Dimensions and nominal load capacities [Withdrawn: replaced with ISO 22883 and ISO 22884]
• ISO 2176:1995 Petroleum products — Lubricating grease — Determination of dropping point
• ISO 2177:2003 Metallic coatings — Measurement of coating thickness — Coulometric method by anodic dissolution
• ISO 2178:2016 Non-magnetic coatings on magnetic substrates — Measurement of coating thickness — Magnetic method
• ISO 2179:1986 Electroplated coatings of tin-nickel alloy — Specification and test methods
• ISO 2182 Tests for colour fastness of textiles - Sixth series [Draft renamed ISO/R 105-6]
• ISO 2184 Industrial castors — Dimensions of top plates
• ISO 2184-1:1972 Part 1: Oblong top-plates with 4 bolt holes [Withdrawn: replaced with ISO 22883 and ISO 22884]
• ISO 2185:1972 Muscovite mica blocks, thins and films — Visual classification [Withdrawn without replacement]
• ISO 2186:2007 Fluid flow in closed conduits – Connections for pressure signal transmissions between primary and secondary elements
• ISO 2187:1990 Spinning preparatory machinery, spinning and doubling (twisting) machinery – List of equivalent terms
• ISO 2189:1986 Expanded pure agglomerated cork — Determination of bulk density [Withdrawn without replacement]
• ISO 2190:2016 Granulated cork — Determination of moisture content
• ISO 2191:1972 Cork — Expanded pure agglomerated — Deformation under constant pressure [Withdrawn without replacement]
• ISO 2192:1984 Petroleum products — Determination of total sulfur content — Lamp method [Withdrawn without replacement]
• ISO 2194:1991 Industrial screens — Woven wire cloth, perforated plate and electroformed sheet — Designation and nominal sizes of openings
• ISO 2195:1972 Data interchange on rolled-up punched paper tape — General requirements [Withdrawn without replacement]
• ISO 2196:1975 Continuous mechanical handling equipment for unit loads — Single strand floor mounted truck conveyors (chain above floor) — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2197:1972 Sodium hydrogen carbonate for industrial use — List of methods of test and preparation of the test sample
• ISO 2198:1972 Sodium hydrogen carbonate for industrial use — Determination of sodium carbonate — Titrimetric method [Withdrawn without replacement]
• ISO 2199:1972 Sodium hydrogen carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetric method
• ISO 2200:1972 Sodium hydrogen carbonate for industrial use — Determination of moisture content — Gravimetric method [Withdrawn without replacement]
• ISO 2201:1972 Sodium hydrogen carbonate for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
• ISO 2202:1972 Liquid chlorine for industrial use — Determination of water content using an electrolytic analyser [Withdrawn without replacement]
• ISO 2203:1973 Technical drawings – Conventional representation of gears
• ISO 2204:1979 Acoustics — Guide to International Standards on the measurement of airborne acoustical noise and evaluation of its effects on human beings [Withdrawn without replacement]
• ISO 2205:1975 Textile machinery and accessories – Drafting arrangements for spinning machines – Terminology
• ISO 2206:1987 Packaging — Complete, filled transport packages — Identification of parts when testing
• ISO 2207:1980 Petroleum waxes — Determination of congealing point
• ISO 2208:1973 Phenol, o-cresol, m-cresol and p-cresol for industrial use — Determination of crystallizing point after drying with a molecular sieve [Withdrawn without replacement]
• ISO 2209:1973 Liquid halogenated hydrocarbons for industrial use — Sampling
• ISO 2210:1972 Liquid halogenated hydrocarbons for industrial use — Determination of residue on evaporation [Withdrawn without replacement]
• ISO 2211:1973 Liquid chemical products — Measurement of colour in Hazen units (platinum-cobalt scale)
• ISO 2212:1972 Trichloroethylene for industrial use — Methods of test [Withdrawn without replacement]
• ISO 2213:1972 Perchloroethylene for industrial use — Methods of test [Withdrawn without replacement]
• ISO 2214:1972 Boric acid, boric oxide and Disodium tetraborates for industrial use — Determination of manganese content — Formaldehyde oxime photometric method [Withdrawn without replacement]
• ISO 2215:1972 Boric acid, boric oxide and Disodium tetraborates for industrial use — Determination of copper content — Zinc dibenzyldithiocarbamate photometric method [Withdrawn without replacement]
• ISO 2216:1972 Crude sodium borates for industrial use — Determination of sodium oxide and boric oxide contents — Volumetric method [Withdrawn without replacement]
• ISO 2217:1972 Crude sodium borates for industrial use — Determination of matter insoluble in alkaline medium and preparation of test solutions [Withdrawn without replacement]
• ISO 2218:1972 Crude sodium borates for industrial use — Determination of loss in mass after heating at 900 degrees C [Withdrawn without replacement]
• ISO 2219:2010 Thermal insulation products for buildings — Factory-made products of expanded cork (ICB) — Specification
• ISO 2220:1972 Hand finishing sticks and oil stones — Dimensions [Withdrawn: replaced with ISO 603-(1-16)]
• ISO 2221:1972 Formaldehyde solutions for industrial use — Limit test for inorganic chlorides [Withdrawn without replacement]
• ISO 2222:1972 Formaldehyde solutions for industrial use — Limit test for inorganic sulphates [Withdrawn without replacement]
• ISO 2223:1972 Formaldehyde solutions for industrial use — Limit test for heavy metals (excluding iron) [Withdrawn without replacement]
• ISO 2224:1972 Formaldehyde solutions for industrial use — Determination of ash [Withdrawn without replacement]
• ISO 2225:1972 Formaldehyde solutions for industrial use — Determination of acidity [Withdrawn without replacement]
• ISO 2226:1972 Formaldehyde solutions for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
• ISO 2227:1972 Formaldehyde solutions for industrial use — Determination of formaldehyde content
• ISO 2228:1972 Formaldehyde solutions for industrial use — Determination of methanol content
• ISO 2229:1973 Equipment for the petroleum and natural gas industries — Steel pipe flanges, nominal sizes 1/2 to 24 in — Metric dimensions [Withdrawn: replaced with ISO 7005-(1-3)]
• ISO 2230:2002 Rubber products — Guidelines for storage
• ISO 2231:1989 Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing
• ISO 2232:1990 Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes — Specifications
• ISO 2233:2000 Packaging — Complete, filled transport packages and unit loads — Conditioning for testing
• ISO 2234:2000 Packaging — Complete, filled transport packages and unit loads — Stacking tests using a static load
• ISO 2235:1993 Abrasive sheets — Dimensions, tolerances and designation [Withdrawn: replaced with ISO 21948]
• ISO 2236:1991 Assembly tools for screws and nuts — Forged and tubular socket wrenches — Maximum outside head dimensions
• ISO 2238:2018 Machine bridge reamers
• ISO 2239:1972 Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of daylight [Withdrawn: replaced with ISO 7589]
• ISO 2240:2003 Photography – Colour reversal camera films – Determination of ISO speed
• ISO 2241:1972 Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of tungsten illumination [Withdrawn: replaced with ISO 7589]
• ISO 2242:1972 Photography — Light sources for use in sensitometric exposure — Simulation of the spectral distribution of photoflood illumination [Withdrawn: replaced with ISO 7589]
• ISO/R 2243:1972 Photography — Illumination conditions for viewing colour transparencies and their reproductions [Withdrawn: replaced with ISO 3664]
• ISO 2244:2000 Packaging — Complete, filled transport packages and unit loads — Horizontal impact tests
• ISO 2245:2006 Shaped insulating refractory products — Classification
• ISO 2246:1972 Dense shaped refractory products — Nomenclature of manufacturing processes [Withdrawn without replacement]
• ISO 2247:2000 Packaging — Complete, filled transport packages and unit loads — Vibration tests at fixed low frequency
• ISO 2248:1985 Packaging — Complete, filled transport packages — Vertical impact test by dropping
• ISO 2249:1973 Acoustics — Description and measurement of physical properties of sonic booms
• ISO 2250:2017 Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
• ISO 2251:1991 Lined antistatic rubber footwear — Specification [Withdrawn without replacement]
• ISO 2252:1983 Rubber footwear, lined industrial, for use at low temperatures [Withdrawn without replacement]
• ISO 2253:1999 Curry powder — Specification
• ISO 2254:2004 Cloves, whole and ground (powdered) — Specification
• ISO 2255:1996 Coriander (Coriandrum sativum L.), whole or ground (powdered) — Specification
• ISO 2256:1984 Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) — Specification
• ISO 2257:1980 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools
• ISO 2258:1976 Printing ribbons – Minimum markings to appear on containers
• ISO 2259:1972 Pots for propagation and transplantation made of peat and other plant material — Sampling [Withdrawn without replacement]
• ISO 2261:1994 Reciprocating internal combustion engines — Hand-operated control devices — Standard direction of motion
• ISO 2262:1984 General purpose thimbles for use with steel wire ropes — Specification
• ISO 2264:1972 Rolling bearings — Bearings with spherical outside surface and extended inner ring width [Withdrawn: replaced with ISO 9628]
• ISO/R 2265:1972 Rolling bearings with locating snap ring — Dimensions [Withdrawn: replaced with ISO 464]
• ISO 2266:1974 Textile machinery and accessories — Metal travellers for spinning and twisting [Withdrawn: replaced with ISO 96-(1-2)]
• ISO 2267:1986 Surface active agents — Evaluation of certain effects of laundering — Methods of preparation and use of unsoiled cotton control cloth
• ISO 2268:1972 Surface active agents (non-ionic) — Determination of polyethylene glycols and non-ionic active matter (adducts) — Weibull method
• ISO 2269:2000 Shipbuilding — Class A magnetic compasses, azimuth reading devices and binnacles — Tests and certification [Withdrawn: replaced with ISO 25862]
• ISO 2270:1989 Non-ionic surface active agents — Polyethoxylated derivatives — Iodometric determination of oxyethylene groups
• ISO 2271:1989 Surface active agents — Detergents — Determination of anionic-active matter by manual or mechanical direct two-phase titration procedure
• ISO 2272:1989 Surface active agents — Soaps — Determination of low contents of free glycerol by molecular absorption spectrometry
• ISO 2276:1972 Reciprocating internal combustion engines — Definition of right-hand and left-hand single bank engines [Withdrawn: replaced with ISO 1204]
• ISO 2277:1973 Static invertors for aircraft
• ISO 2281:1990 Horology – Water-resistant watches [Withdrawn: replaced with ISO 22810:2010]
• ISO 2283:2000 Long shank taps with nominal diameters from M3 to M24 and 1/8 in to 1 in — Reduced shank taps
• ISO 2284:2017 Hand taps for parallel and taper pipe threads — General dimensions and marking
• ISO 2285:2019 Rubber, vulcanized or thermoplastic — Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load
• ISO 2286 Rubber- or plastics-coated fabrics — Determination of roll characteristics
  • ISO 2286-1:2016 Part 1: Methods for determination of length, width and net mass
  • ISO 2286-2:2016 Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate
  • ISO 2286-3:2016 Part 3: Method for determination of thickness
• ISO 2288:1997 Agricultural tractors and machines — Engine test code — Net power [Withdrawn without replacement]
• ISO 2289:1972 Rotary drilling equipment — Kellys [Withdrawn without replacement]
• ISO 2290:1972 Rotary drilling equipment — Upper and lower Kelly cocks [Withdrawn without replacement]
• ISO 2291:1980 Cocoa beans — Determination of moisture content (Routine method) [Withdrawn: replaced with ISO 2451]
• ISO 2292:2017 Cocoa beans — Sampling
• ISO 2293:1988 Meat and meat products — Enumeration of micro-organisms — Colony count technique at 30 degrees C (Reference method) [Withdrawn without replacement]
• ISO 2294:1974 Meat and meat products — Determination of total phosphorus content (Reference method) [Withdrawn: replaced with ISO 23776]
• ISO 2295:1974 Avocados — Guide for storage and transport
• ISO 2296:2018 Metal slitting saws with fine and coarse teeth — Metric series
• ISO 2297:1973 Chemical analysis of aluminium and its alloys — Complexometric determination of magnesium
• ISO/R 2298:1972 Alluminium and its alloys — Determination of chromium — Spectrophotometric method using diphenylcarbazide [Withdrawn without replacement]
• ISO 2299:1973 Sawn timber of broadleaved species — Defects — Classification
• ISO 2300:1973 Sawn timber of broadleaved species — Defects — Terms and definitions
• ISO 2301:1973 Sawn timber of broadleaved species — Defects — Measurement
• ISO 2302:2020 Isobutene-isoprene rubber (IIR) — Evaluation procedure
• ISO 2303:2019 Isoprene rubber (IR) — Non-oil-extended, solution-polymerized types — Evaluation procedures
• ISO 2306:1972 Drills for use prior to tapping screw threads
• ISO 2307:2019 Fibre ropes — Determination of certain physical and mechanical properties
• ISO 2308:1972 Hooks for lifting freight containers of up to 30 tonnes capacity — Basic requirements
• ISO 2309:1980 Coke — Sampling [Withdrawn: replaced with ISO 18283]
• ISO 2311:1972 Electrolytic cathode copper [Withdrawn: replaced with ISO 431]
• ISO 2312:1972 Carbon tetrachloride for industrial use — Methods of test [Withdrawn without replacement]
• ISO 2313 Textiles — Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery
• ISO 2313-1:2021 Part 1: Method of the horizontally folded specimen
• ISO 2313-2:2021 Part 2: Method of the vertically folded specimen
• ISO 2314:2009 Gas turbines — Acceptance tests
• ISO 2315:1980 Aircraft — Two- and four-pole sealed electromagnetic relays, 2 A and 3 A — Clearance and fixing dimensions
• ISO 2316:1973 Rolling bearings — Metric tapered roller bearings — Bearing width and cup width [Withdrawn: replaced with ISO 355]
• ISO 2318 Measurement of carbon variation in threads of hardened and tempered bolts, screws, and studs [Rejected draft]
• ISO 2320:2015 Fasteners — Prevailing torque steel nuts — Functional properties
• ISO 2321:2017 Rubber threads — Methods of test
• ISO 2322:2014 Styrene-butadiene rubber (SBR) — Emulsion- and solution-polymerized types — Evaluation procedures
• ISO 2324:1972 End mills and slot drills — Milling cutters with 7/24 taper shanks [Withdrawn: replaced with ISO 1641-3]
• ISO 2325:1986 Coke — Size analysis (Nominal top size 20 mm or less) [Withdrawn: replaced with ISO 728]
• ISO 2326:1972 Continuous mechanical handling equipment for loose bulk materials — Aeroslides
• ISO 2327:1972 Pneumatic handling appliances for loose bulk materials — Piping
• ISO 2328:2011 Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions
• ISO 2329:1983 Fork-lift trucks — Fork arms — Dimensions [Withdrawn without replacement]
• ISO 2330:2002 Fork-lift trucks — Fork arms — Technical characteristics and testing
• ISO 2331:1974 Fork lift trucks – Hook-on type fork arms – Vocabulary
• ISO 2332:2009 Agricultural tractors and machinery — Connection of implements via three-point linkage — Clearance zone around implement
• ISO 2333:1972 Shipbuilding — Cargo gear particulars book [Withdrawn without replacement]
• ISO 2335 Commercial refrigerated cabinets — Methods of test — Temperature Test [Draft renamed ISO 1992-3]
• ISO 2336:1980 Hand and machine hacksaw blades — Dimensions for lengths up to 450 mm and pitches up to 6,3 mm [Withdrawn without replacement]
• ISO 2337 [Draft merged into ISO 370]
• ISO 2338:1997 Parallel pins, of unhardened steel and austenitic stainless steel
• ISO 2339:1986 Taper pins, unhardened
• ISO 2340:1986 Clevis pins without head
• ISO 2341:1986 Clevis pins with head
• ISO 2342:2003 Slotted headless screws with shank
• ISO 2343:1972 Hexagon socket set screws — Metric series [Withdrawn: replaced with ISO 4026, ISO 4027, ISO 4028, and ISO 4029]
• ISO 2344:1998 Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housings [Withdrawn without replacement]
• ISO 2345:1994 Road vehicles — M18 x 1,5 spark-plugs with conical seating and their cylinder head housing [Withdrawn without replacement]
• ISO 2346:2001 Road vehicles — M14 x 1,25 compact spark-plugs with flat seating and 19 mm hexagon and their cylinder head housing [Withdrawn without replacement]
• ISO 2347:1994 Road vehicles — M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing [Withdrawn without replacement]
• ISO 2349:1973 Rolling bearings — Tapered rolling bearings — Sub-units — Tolerances — Metric series, normal tolerance class and tolerance class 6 — Inch series, tolerance class 4 (normal tolerance class) [Withdrawn: Replaced with ISO 492 and ISO 578 (now withdrawn)]
• ISO 2351 Assembly tools for screws and nuts — Machine-operated screwdriver bits
  • ISO 2351-1:2007 Part 1: Screwdriver bits for slotted head screws
  • ISO 2351-2:2002 Part 2: Screwdriver bits for cross-recessed head screws
• ISO 2352:2000 Assembly tools for screws and nuts — Spiral ratchet screwdriver ends — Dimensions [Withdrawn without replacement]
• ISO 2353:1972 Magnesium and its alloys — Determination of manganese in magnesium alloys containing zirconium, rare earths, thorium and silver — Periodate photometric method
• ISO 2354:1976 Magnesium alloys — Determination of insoluble zirconium — Alizarin sulphonate photometric method
• ISO 2355:1972 Chemical analysis of magnesium and its alloys — Determination of rare earths — Gravimetric method
• ISO 2358:1972 Prevailing torque-type steel hexagon locknuts — Dimensions — Metric series [Withdrawn: replaced with ISO 7040, ISO 7041, ISO 7042, ISO 7043, and ISO 7044]
• ISO 2359:1972 Prevailing torque-type steel hexagon locknuts — Dimensions — Inch series [Withdrawn without replacement]
• ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method
• ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates — Measurement of coating thickness — Magnetic method
• ISO 2362:1972 Aluminium fluoride for industrial use — Determination of fluorine content — Modified Willard-Winter method [Withdrawn without replacement]
• ISO 2363:1972 Sulphuric acid and oleums for industrial use — Determination of oxides of nitrogen — 2,4- Xylenol spectrophotometric method [Withdrawn without replacement]
• ISO 2364:1972 Ammonium nitrate for industrial use — Determination of free acidity — Volumetric method [Withdrawn without replacement]
• ISO 2365:1972 Ammonium nitrate for industrial use — Measurement of pH value — Potentiometric method [Withdrawn without replacement]
• ISO 2366:1974 Cryolite, natural and artificial — Determination of sodium content — Flame emission and atomic absorption spectrophotometric methods
• ISO 2367:1972 Cryolite, natural and artificial — Determination of aluminium content — 8- Hydroxyquinoline gravimetric method
• ISO 2368:1972 Aluminium fluoride for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
• ISO 2369:1972 Aluminium fluoride for industrial use — Determination of silica content — Spectrophotometric method using the reduced silicomolybdic complex [Withdrawn without replacement]
• ISO 2370:2019 Textiles — Determination of fineness of flax fibres — Permeametric methods
• ISO 2371:1974 Field balancing equipment — Description and evaluation [Withdrawn without replacement]
• ISO 2372:1974 Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards [Withdrawn: replaced with ISO 10816-1]
• ISO 2373:1987 Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm — Measurement and evaluation of the vibration severity [Withdrawn without replacement]
• ISO 2374:1983 Lifting appliances — Range of maximum capacities for basic models
• ISO/IEC 2375:2003 Information technology – Procedure for registration of escape sequences and coded character sets
• ISO 2376:2019 Anodizing of aluminium and its alloys — Determination of breakdown voltage and withstand voltage
• ISO 2377:1972 Magnesium alloy sand castings — Reference test bar [Withdrawn without replacement]
• ISO 2378:1972 Aluminium alloy chill castings — Reference test bar [Withdrawn without replacement]
• ISO 2379:1972 Aluminium alloy sand castings — Reference test bar [Withdrawn without replacement]
• ISO 2380:1979 Screwdriver blades for slotted head screws [Withdrawn without replacement]
• ISO 2381:1972 Continuous mechanical handling equipment for unit loads — Single strand floor truck conveyors (chain below floor) — Safety code [Withdrawn: replaced with ISO 7149]
• ISO/IEC 2382:2015 Information technology – Vocabulary
  • ISO/IEC 2382-36:2019 Part 36: Learning, education and training
  • ISO/IEC 2382-37:2017 Part 37: Biometrics
• ISO 2383 Data processing — Vocabulary — Part 04: Organization of data [Draft merged into ISO 2382]
• ISO 2384:1977 Documentation – Presentation of translations
• ISO 2385:2020 Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Sampling to determine moisture content
• ISO 2386:2019 Packed cork — Virgin cork, raw reproduction cork, burnt cork, boiled reproduction cork and raw cork waste — Determination of moisture content
• ISO 2387:1972 Continuous mechanical handling equipment for loose bulk materials — Mobile belt conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2388:1972 Continuous mechanical handling equipment for unit loads — Mobile belt conveyors (canvas, rubber, plastic, etc.) — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2389:1972 Continuous mechanical handling equipment for loose bulk materials �� Picking table conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2390:1972 Continuous mechanical handling equipment for loose bulk materials — Apron conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2391:1972 Continuous mechanical handling equipment for loose bulk materials — Scraper conveyors and "en masse" conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2392:1972 Continuous mechanical handling equipment for loose bulk materials — Hydraulic conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 2393:2014 Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures
• ISO 2394:2015 General principles on reliability for structures
• ISO 2395:1990 Test sieves and test sieving – Vocabulary
• ISO 2398:2016 Rubber hoses, textile-reinforced, for compressed air — Specification
• ISO 2400:2012 Non-destructive testing — Ultrasonic testing — Specification for calibration block No. 1
• ISO 2401:2018 Welding consumables — Covered electrodes — Determination of the efficiency, metal recovery and deposition coefficient
• ISO 2402:1972 Shell reamers with taper bore (taper bore 1 : 30 (included)) with slot drive and arbors for shell reamers
• ISO 2403:2021 Textiles — Cotton fibres — Determination of micronaire value
• ISO 2404:1986 Cinematography — Six-track magnetic sound records on 70 mm striped release prints — Locations and dimensions
• ISO 2405:1972 Recommended practice for radiographic inspection of fusion welded butt joints for steel plates 50 to 200 mm thick [Withdrawn: replaced with ISO 1106-2]
• ISO 2406:1974 Continuous mechanical handling equipment — Mobile and portable conveyors — Constructional specifications
• ISO 2407:1997 Test conditions for internal cylindrical grinding machines with horizontal spindle — Testing of accuracy
• ISO 2408:2017 Steel wire ropes — Requirements
• ISO 2409:2020 Paints and varnishes — Cross-cut test
• ISO 2410:1973 Household refrigerators — Methods of test for the information of the consumer [Withdrawn without replacement]
• ISO 2411:2017 Rubber- or plastics-coated fabrics — Determination of coating adhesion
• ISO 2412:1982 Shipbuilding — Colours of indicator lights
• ISO 2415:2004 Forged shackles for general lifting purposes — Dee shackles and bow shackles
• ISO 2416:1992 Passenger cars — Mass distribution
• ISO 2417:2016 Leather — Physical and mechanical tests — Determination of the static absorption of water
• ISO 2418:2017 Leather — Chemical, physical and mechanical and fastness tests — Sampling location
• ISO 2419:2012 Leather — Physical and mechanical tests — Sample preparation and conditioning
• ISO 2420:2017 Leather — Physical and mechanical tests — Determination of apparent density and mass per unit area
• ISO 2421:2003 Coated abrasives — Cylindrical sleeves
• ISO 2422:1986 Truncated cone abrasive sleeves — Dimensions and designation [Withdrawn without replacement]
• ISO 2423:1982 Acceptance conditions for radial drilling machines with the arm adjustable in height — Testing of accuracy
• ISO 2424:2007 Textile floor coverings — Vocabulary
• ISO 2425:2010 Hydrometry – Measurement of liquid flow in open channels under tidal conditions
• ISO 2426 Plywood — Classification by surface appearance
• ISO 2426-1:2020 Part 1: General
• ISO 2426-2:2020 Part 2: Hardwood
• ISO 2426-3:2020 Part 3: Softwood
• ISO 2426-4:2020 Part 4: Palm-plywood
• ISO 2427:1974 Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of beech [Withdrawn: replaced with ISO 2426-(2-3)]
• ISO 2428:1974 Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of birch [Withdrawn: replaced with ISO 2426-(2-3)]
• ISO 2429:1974 Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of broadleaved species of tropical Africa [Withdrawn: replaced with ISO 2426-(2-3)]
• ISO 2430:1974 Plywood — Veneer plywood with rotary cut veneer for general use — Classification by appearance of panels with outer veneers of poplar [Withdrawn: replaced with ISO 2426-(2-3)]
• ISO 2431:2019 Paints and varnishes — Determination of flow time by use of flow cups
• ISO 2433:1999 Machine tools — Test conditions for external cylindrical and universal grinding machines with a movable table — Testing of accuracy
• ISO 2434:1973 Compressed non-breathing air for use in aircraft
• ISO 2435:1973 Nitrogen for use in aircraft
• ISO 2436:1973 Heat-resisting equipment wires for aircraft — Methods of test
• ISO 2437:1972 Recommended practice for the X-ray inspection of fusion welded butt joints for aluminium and its alloys and magnesium and its alloys 5 to 50 mm thick [Withdrawn without replacement]
• ISO 2438:1981 Rubber latex, synthetic — Codification [Withdrawn without replacement]
• ISO 2439:2008 Flexible cellular polymeric materials — Determination of hardness (indentation technique)
• ISO 2440:2019 Flexible and rigid cellular polymeric materials — Accelerated ageing tests
• ISO 2441:1975 Pipeline flanges for general use — Shapes and dimensions of pressure-tight surfaces [Withdrawn: replaced with ISO 7005-(1-3)]
• ISO 2443:1980 Vines — Root stock, cuttings, scions and plants — Specification [Withdrawn without replacement]
• ISO 2444:1988 Joints in building – Vocabulary [Withdrawn: replaced with ISO 6707-1]
• ISO 2445:1972 Joints in building — Fundamental principles for design
• ISO 2446:2008 Milk — Determination of fat content [Withdrawn: replaced with ISO 19662]
• ISO 2447:1998 Fruit and vegetable products — Determination of tin content
• ISO 2448:1998 Fruit and vegetable products — Determination of ethanol content
• ISO 2449:1974 Milk and liquid milk products — Density hydrometers for use in products with a surface tension of approximately 45 mN/m [Withdrawn without replacement]
• ISO 2450:2008 Cream — Determination of fat content — Gravimetric method (Reference method)
• ISO 2451:2017 Cocoa beans — Specification and quality requirements
• ISO 2452 Data processing — Vocabulary — Part 05: Representation of data [Draft merged into ISO 2382]
• ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
• ISO 2454:1995 Rubber products — Determination of zinc content — EDTA titrimetric method
• ISO 2455 Data processing — Vocabulary — [Draft merged into ISO 2382]
• ISO 2456:1986 Surface active agents — Water used as a solvent for tests — Specification and test methods
• ISO 2457:1976 Solid wood parquet — Classification of beech strips
• ISO 2458:1975 End-suction centrifugal pumps (rating 16 bar) — Test Code [Rejected draft]
• ISO 2460:1973 Sodium hydrogen carbonate for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method
• ISO 2461:1973 Sodium hydrogen carbonate for industrial use — Determination of matter insoluble in water
• ISO 2462:1973 Sodium chlorate for industrial use — Determination of moisture content — Gravimetric method
• ISO 2463:1973 Sodium chlorate for industrial use — Determination of chloride content — Mercurimetric method
• ISO 2464:1973 Crude glycerine for industrial use — Calculation of Matter (Organic) Non-Glycerol (MONG) [Withdrawn without replacement]
• ISO 2465:1973 Glycerols for industrial use — Determination of arsenic content — Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
• ISO 2466:1973 Potassium hydroxide for industrial use — Sampling — Test sample — Preparation of the main solution for carrying out certain determinations
• ISO 2467:2004 Cinematography — Image area produced by 65 mm/5 perforation motion-picture camera aperture and maximum projectable image area on 70 mm/5 perforation motion-picture prints — Positions and dimensions
• ISO 2469:2014 Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor)
• ISO 2470 Paper, board and pulps — Measurement of diffuse blue reflectance factor
  • ISO 2470-1:2016 Part 1: Indoor daylight conditions (ISO brightness)
  • ISO 2470-2:2016 Part 2: Outdoor daylight conditions (D65 brightness)
• ISO 2471:2008 Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method
• ISO 2472:1975 Ebonite — Determination of tensile strength and elongation at break [Withdrawn without replacement]
• ISO 2473:1972 Ebonite — Determination of cross-breaking strength [Withdrawn without replacement]
• ISO 2474:1972 Ebonite — Determination of crushing strength [Withdrawn without replacement]
• ISO 2475:2011 Chloroprene rubber (CR) — General-purpose types — Evaluation procedure
• ISO 2476:2014 Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures
• ISO 2477:2005 Shaped insulating refractory products — Determination of permanent change in dimensions on heating
• ISO 2478:1987 Dense shaped refractory products — Determination of permanent change in dimensions on heating
• ISO 2479:1972 Sodium chloride for industrial use — Determination of matter insoluble in water or in acid and preparation of principal solutions for other determinations
• ISO 2480:1972 Sodium chloride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method
• ISO 2481:1973 Sodium chloride for industrial use — Determination of halogens, expressed as chlorine — Mercurimetric method
• ISO 2482:1973 Sodium chloride for industrial use — Determination of calcium and magnesium contents — EDTA complexometric methods
• ISO 2483:1973 Sodium chloride for industrial use — Determination of the loss of mass at 110 degrees C
• ISO 2484:1973 Potassium sulphate for industrial use — Determination of potassium content — Flame emission spectrophotometric method [Withdrawn without replacement]
• ISO 2485:1973 Potassium sulphate for industrial use — Determination of potassium content — Gravimetric method as potassium tetraphenylborate [Withdrawn without replacement]
• ISO 2486:1973 Potassium sulphate for industrial use — Determination of potassium content — Gravimetric method as potassium tetraphenylborate [Withdrawn without replacement]
• ISO 2487:1973 Potassium sulphate for industrial use — Determination of sulphate content — Barium sulphate gravimetric method [Withdrawn without replacement]
• ISO 2488:1973 Potassium sulphate for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
• ISO 2489:1973 Potassium sulphate for industrial use — Determination of acidity to methyl orange [Withdrawn without replacement]
• ISO 2490:2007 Solid (monobloc) gear hobs with tenon drive or axial keyway, 0,5 to 40 module — Nominal dimensions
• ISO 2491:1974 Thin parallel keys and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
• ISO 2492:1974 Thin taper keys with or without gib head and their corresponding keyways (Dimensions in millimetres) [Withdrawn without replacement]
• ISO 2493 Paper and board — Determination of bending resistance
  • ISO 2493-1:2010 Part 1: Constant rate of deflection
  • ISO 2493-2:2011 Part 2: Taber-type tester
• ISO 2494:1974 Paper and board — Recommended procedure for the determination of roughness — Constant-pressure air-flow method [Withdrawn: replaced with ISO 8791-(2-3)]
• ISO 2495:1995 Iron blue pigments — Specifications and methods of test
• ISO 2496:1973 secButyl alcohol for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2497:1973 Methyl ethyl ketone for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2498:1974 Methyl ethyl ketone for industrial use — Examination for residual odour [Withdrawn without replacement]
• ISO 2499:1974 isoButyl methyl ketone for industrial use — List of methods of test [Withdrawn without replacement]

ISO 2500 – ISO 2999[]

• ISO 2500:1974 isoAmyl ethyl ketone for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2501:1973 Methyl ethyl ketone, isobutyl methyl ketone and isoamyl ethyl ketone for industrial use — Determination of alcoholic impurities — Volumetric method [Withdrawn without replacement]
• ISO 2502 Gas welding equipment — Safety code [Rejected draft]^[8]
• ISO 2503:2009 Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
• ISO 2504:1973 Radiography of welds and viewing conditions for films — Utilization of recommended patterns of image quality indicators (I.Q.I.) [Withdrawn without replacement]
• ISO 2505:2005 Thermoplastics pipes — Longitudinal reversion — Test method and parameters
• ISO 2506:1981 Polyethylene pipes (PE) — Longitudinal reversion — Test methods and specification [Withdrawn: replaced with ISO 2505]
• ISO 2507 Thermoplastics pipes and fittings — Vicat softening temperature
  • ISO 2507-1:1995 Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
  • ISO 2507-2:1995 Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
• ISO 2508:1981 Unplasticized polyvinyl chloride (PVC) pipes — Water absorption — Determination and specification [Withdrawn without replacement]
• ISO 2509:1989 Sound-absorbing expanded pure agglomerated cork in tiles
• ISO 2510:1989 Sound-reducing composition cork in tiles [Withdrawn without replacement]
• ISO 2511:1974 Furfural for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2512:1974 Furfural for industrial use — Determination of total carbonyl compounds — Volumetric method [Withdrawn without replacement]
• ISO 2513:1974 Acetaldehyde for industrial use — Determination of density at 15 degrees C [Withdrawn without replacement]
• ISO 2514:1974 Acetaldehyde for industrial use — Determination of water content — Karl Fischer method [Withdrawn without replacement]
• ISO 2515:1973 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of ammoniacal nitrogen content — Volumetric method after distillation [Withdrawn without replacement]
• ISO 2516:1973 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of total alkalinity — Volumetric method [Withdrawn without replacement]
• ISO 2517:1974 Diacetone alcohol for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2518:1974 Diacetone alcohol and hexylene glycol for industrial use — Test for miscibility with water [Withdrawn without replacement]
• ISO 2519:1974 Hexylene glycol for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2520:1974 Tritolyl phosphate for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2521:1974 Tritolyl phosphate for industrial use — Determination of acidity to phenol red — Volumetric method [Withdrawn without replacement]
• ISO 2522:1974 Tritolyl phosphate for industrial use — Determination of apparent free phenols content — Volumetric method [Withdrawn without replacement]
• ISO 2523:1974 Adipate esters for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2524:1974 Adipate esters for industrial use — Measurement of colour after heat treatment [Withdrawn without replacement]
• ISO 2525:1974 Adipate esters for industrial use — Determination of acidity to phenolphthalein — Volumetric method [Withdrawn without replacement]
• ISO 2526:1974 Adipate esters for industrial use — Determination of ash — Gravimetric method [Withdrawn without replacement]
• ISO 2527:1974 Adipate esters for industrial use — Determination of ester content — Volumetric method [Withdrawn without replacement]
• ISO 2528:2017 Sheet materials — Determination of water vapour transmission rate (WVTR) — Gravimetric (dish) method
• ISO 2529:1973 Aircraft — Zones, access doors and panels — Referencing system [Withdrawn without replacement]
• ISO 2530:1975 Keyboard for international information processing interchange using the ISO 7- bit coded character set — Alphanumeric area [Withdrawn: replaced with ISO 9995-(1,7)]
• ISO 2531:2009 Ductile iron pipes, fittings, accessories and their joints for water applications
• ISO 2532:1974 Steel wire ropes – Vocabulary
• ISO 2533:1975 Standard Atmosphere
• ISO 2534:2020 Road vehicles — Engine test code — Gross power
• ISO 2535:2001 Plastics — Unsaturated-polyester resins — Measurement of gel time at ambient temperature
• ISO 2536:1974 Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series — Dimensions of flanges [Withdrawn without replacement]
• ISO 2537:2007 Hydrometry – Rotating-element current-meters
• ISO 2538 Geometrical product specifications (GPS) – Wedges
  • ISO 2538-1:2014 Part 1: Series of angles and slopes
  • ISO 2538-2:2014 Part 2: Dimensioning and tolerancing
• ISO 2539:1974 Numerical control of machines — Punched tape variable block format for contouring and contouring/positioning [Withdrawn: replaced with ISO 6983-1]
• ISO 2540:2016 Centre drills for centre holes with protecting chamfer — Type B
• ISO 2541:2016 Centre drills for centre holes with radius form — Type R
• ISO 2542:1980 Internal combustion engines — Spark plug ignition — Terminology [Withdrawn: replaced with ISO 6518-1]
• ISO 2543:1973 Copper and copper alloys — Determination of manganese — Spectrophotometric method [Withdrawn without replacement]
• ISO 2544:1975 Textile machinery and accessories — Warping machinery — Preparation of warp for weaving — Vocabulary [Withdrawn without replacement]
• ISO 2546:1973 Seamless plain end tubes made from unalloyed steel and without quality requirements [Withdrawn without replacement]
• ISO 2547:1973 Welded plain end tubes made from unalloyed steel and without quality requirements [Withdrawn without replacement]
• ISO 2548:1973 Centrifugal, mixed flow and axial pumps — Code for acceptance tests — Class C [Withdrawn: replaced with ISO 9906]
• ISO 2549:1972 Textile floor coverings — Hand-knotted carpets — Determination of tuft leg length above the woven ground
• ISO 2550:1972 Textile floor coverings — Hand-made carpets — Determination of types of knots
• ISO 2551:2020 Textile floor coverings and textile floor coverings in tile form — Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane
• ISO 2553:2019 Welding and allied processes – Symbolic representation on drawings – Welded joints
• ISO 2554:1997 Plastics — Unsaturated polyester resins — Determination of hydroxyl value
• ISO 2555:2018 Plastics — Resins in the liquid state or as emulsions or dispersions — Determination of apparent viscosity using a single cylinder type rotational viscometer method
• ISO 2556:1974 Plastics — Determination of the gas transmission rate of films and thin sheets under atmospheric pressure — Manometric method
• ISO 2557 Plastics — Amorphous thermoplastics — Preparation of test specimens with a specified maximum reversion
  • ISO 2557-1:1989 Part 1: Bars [Withdrawn without replacement]
  • ISO 2557-2:1986 Part 2: Plates [Withdrawn without replacement]
• ISO 2558:2010 Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene
• ISO 2559:2011 Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
• ISO 2560:2020 Welding consumables — Covered electrodes for manual metal arc welding of non-alloy and fine grain steels — Classification
• ISO 2561:2012 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
• ISO 2562:1973 Modular units for machine tool construction — Slide units
• ISO 2563:2009 Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings
• ISO 2564 Conveyor chains, attachments and chain wheels — Part 2: Chain wheels [Draft renamed ISO 1977-2]
• ISO 2565 Conveyor chains, attachments and chain wheels — Part 3: Attachments — Metric series [Draft renamed ISO 1977-3]
• ISO 2566 Steel — Conversion of elongation values
  • ISO 2566-1:2021 Part 1: Carbon and low-alloy steels
  • ISO 2566-2:2021 Part 2: Austenitic steels
• ISO 2568:1988 Hand- and machine-operated circular screwing dies and hand-operated die stocks
• ISO 2569:1994 Cork stoppers — Vocabulary [Withdrawn without replacement]
• ISO 2572:1982 Textile machinery and accessories — Card gauges
• ISO 2573:1977 Tensile testing systems — Determination of K-value [Withdrawn without replacement]
• ISO 2574:1994 Aircraft – Electrical cables – Identification marking
• ISO 2575:2021 Road vehicles – Symbols for controls, indicators and tell-tales
• ISO 2576:1972 Chemical analysis of zinc alloys — Polarographic determination of lead and cadmium in zinc alloys containing copper [Withdrawn without replacement]
• ISO 2577:2007 Plastics — Thermosetting moulding materials — Determination of shrinkage
• ISO 2578:1993 Plastics — Determination of time-temperature limits after prolonged exposure to heat
• ISO 2579 Plastics — Instrumental evaluation of color difference [Rejected draft]
• ISO 2580 Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials
  • ISO 2580-1:2002 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 19062-1]
  • ISO 2580-2:2003 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 19062-2]
• ISO 2581:1975 Rigid cellular plastics — Determination of apparent thermal conductivity by means of a heat-flow meter [Withdrawn: replaced with ISO 8301]
• ISO 2582:1978 Cork and cork products — Determination of thermal conductivity — Hot plate method [Withdrawn without replacement]
• ISO 2583:1972 Tool shanks and equipment with 7/24 tapers — Collar dimensions [Withdrawn: replaced with ISO 297]
• ISO 2584:2016 Cylindrical cutters with plain bore and key drive — Metric series
• ISO 2585:1972 Slotting cutters with plain bore and key drive — Metric series
• ISO 2586:1985 Shell end mills with plain bore and tenon drive — Metric series
• ISO 2587:1972 Side and face milling cutters with plain bore and key drive — Metric series
• ISO 2588:2014 Leather — Sampling — Number of items for a gross sample
• ISO 2589:2016 Leather — Physical and mechanical tests — Determination of thickness
• ISO 2590:1973 General method for the determination of arsenic — Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
• ISO 2591 Test sieving
  • ISO 2591-1:1988 Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
• ISO 2592:2017 Petroleum and related products — Determination of flash and fire points — Cleveland open cup method
• ISO/IEC 2593:2000 Information technology – Telecommunications and information exchange between systems – 34-pole DTE/DCE interface connector mateability dimensions and contact number assignments
• ISO 2594:1972 Building drawings — Projection methods [Withdrawn: replaced with ISO 128-43]
• ISO 2595:1973 Building drawings — Dimensioning of production drawings — Representation of manufacturing and work sizes [Withdrawn: replaced with ISO 129, now ISO 129-1]
• ISO 2596:2006 Iron ores — Determination of hygroscopic moisture in analytical samples — Gravimetric, Karl Fischer and mass-loss methods
• ISO 2597 Iron ores — Determination of total iron content
  • ISO 2597-1:2006 Part 1: Titrimetric method after tin(II) chloride reduction
  • ISO 2597-2:2019 Part 2: Titrimetric methods after titanium(III) chloride reduction
• ISO 2598 Iron ores — Determination of silicon content
  • ISO 2598-1:1992 Part 1: Gravimetric methods
  • ISO 2598-2:1992 Part 2: Reduced molybdosilicate spectrophotometric method
• ISO 2599:2003 Iron ores — Determination of phosphorus content — Titrimetric method
• ISO 2600 Iron ores — Sampling — Incremental method [Rejected draft]
• ISO 2601 Iron ores — Preparation of samples [Rejected draft]
• ISO 2602:1980 Statistical interpretation of test results – Estimation of the mean – Confidence interval
• ISO 2603:2016 Simultaneous interpreting — Permanent booths — Requirements
• ISO 2604 Steel products for pressure purposes — Quality requirements
  • ISO 2604-1:1975 Part 1: Forgings [Withdrawn: replaced with ISO 9327-(1-5)]
  • ISO 2604-2:1975 Part 2: Wrought [Withdrawn: replaced with ISO 9329-(1-4)]
  • ISO 2604-3:1975 Part 3: Electric resistance and induction-welded tubes [Withdrawn: replaced with ISO 9330-(1-3)]
  • ISO 2604-4:1975 Part 4: Electric resistance and induction-welded tubes [Withdrawn: replaced with ISO 9328-(1-5)]
  • ISO 2604-5:1978 Part 5: Longitudinally welded austenitic stainless steel tubes [Withdrawn: replaced with ISO 9330-6]
  • ISO 2604-6:1978 Part 6: Submerged arc longitudinally or spirally welded steel tubes [Withdrawn: replaced with ISO 9330-1]
  • ISO/TR 2604-7:1986 Part 7: Carbon steel plate (thicknesses over 100 to 250 mm) [Withdrawn: replaced with ISO 9328-(1-5)]
  • ISO 2604-8:1985 Part 8: Plates of weldable fine grain steels with high proof stress supplied in the normalized or quenched and tempered condition (thicknesses from 3 to 70 mm) [Withdrawn: replaced with ISO 9328-(1-5)]
• ISO 2605 Steel products for pressure purposes — Derivation and verification of elevated temperature properties [Original draft renamed ISO 2604-2]
  • ISO 2605-1:1976 Part 1: Yield or proof stress of carbon and low alloy steel products [Withdrawn without replacement]
  • ISO 2605-2:1976 Part 2: Proof stress of austenitic steel products [Withdrawn without replacement]
  • ISO 2605-3:1985 Part 3: An alternative procedure for deriving the elevated temperature yield or proof stress properties when data are limited
• ISO 2606 [Draft renamed ISO 2604-3]
• ISO 2607 [Draft renamed ISO 2604-4]
• ISO 2608 Carbon and low-alloy steels — procedure for deriving minimum proof stress values
• ISO 2624:1990 Copper and copper alloys — Estimation of average grain size
• ISO 2625:1973 Copper and copper alloys — Reverse bend testing of wire [Withdrawn: replaced with ISO 7801]
• ISO 2626:1973 Copper — Hydrogen embrittlement test
• ISO 2627:1973 Copper and copper alloys — Simple torsion testing of wire [Withdrawn: replaced with ISO 7800]
• ISO 2628:1973 Basic mode control procedures – Complements
• ISO 2629:1973 Basic mode control procedures – Conversational information message transfer
• ISO/TR 2630:1978 Rubbers, raw — Sampling for inspection by variables [Withdrawn: replaced with ISO 1795]
• ISO 2631 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration
  • ISO 2631-1:1997 Part 1: General requirements
  • ISO 2631-2:2003 Part 2: Vibration in buildings (1 Hz to 80 Hz)
  • ISO 2631-3:1985 Part 3: Evaluation of exposure to whole-body z-axis vertical vibration in the frequency range 0,1 to 0,63 Hz [Withdrawn: replaced with ISO 2631-1]
  • ISO 2631-4:2001 Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems
  • ISO 2631-5:2018 Part 5: Method for evaluation of vibration containing multiple shocks
• ISO 2632 Roughness comparison specimens
  • ISO 2632-1:1985 Part 1: Turned, ground, bored, milled, shaped and planed [Withdrawn without replacement]
  • ISO 2632-2:1985 Part 2: Spark-eroded, shot-blasted and grit-blasted, and polished [Withdrawn without replacement]
  • ISO 2632-3:1979 Part 3: Cast surfaces [Withdrawn without replacement]
• ISO 2633:1974 Determination of imposed floor loads in production buildings and warehouses
• ISO 2634 Current codes for designing reinforcements of openings [Rejected draft]^[9]
• ISO 2635:2003 Aircraft — Conductors for general purpose aircraft electrical cables and aerospace applications — Dimensions and characteristics
• ISO 2636:1973 Information processing — Conventions for incorporating flowchart symbols in flowcharts [Withdrawn: replaced with ISO 5807]
• ISO 2637:1973 Aluminium and its alloys — Determination of zinc — Atomic absorption method [Withdrawn: replaced with ISO 5194]
• ISO 2638 Liquid flow measurement in open channels — Dilution methods for the measurement of steady flow — Part 2: Integration method [Draft renamed ISO 555-2
• ISO 2639:2002 Steels — Determination and verification of the depth of carburized and hardened cases [Withdrawn: replaced with ISO 18203]
• ISO 2640 Commercial refrigerated cabinets — Methods of test — Defrosting test [Draft renamed ISO 1992-4]
• ISO 2641 Commercial refrigerated cabinets — Methods of test — Water vapour condensation test [Draft renamed ISO 1992-5]
• ISO 2642 Commercial refrigerated cabinets — Methods of test — Electrical energy consumption test [Draft renamed ISO 1992-6]
• ISO 2643 Commercial refrigerated cabinets — Methods of test — Test for odour of material [Rejected draft]
• ISO 2644:1975 Materials and equipment for petroleum and natural gas industries — Steel drill pipe for oil or natural gas wells [Withdrawn without replacement]
• ISO 2645:1975 Materials and equipment for petroleum and natural gas industries — Casing and tubing for oil or natural gas wells [Withdrawn: replaced with ISO 11960]
• ISO 2646:1974 Wool — Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine
• ISO 2647:2020 Wool — Determination of percentage of medullated fibres by the projection microscope
• ISO 2648:2020 Wool — Determination of fibre length distribution parameters — Capacitance method
• ISO 2649:1974 Wool — Determination of short-term irregularity of linear density of slivers, rovings and yarns, by means of an electronic evenness tester [Withdrawn without replacement]
• ISO 2650:1974 Environmental tests for aircraft equipment – Part 1: Scope and applicability [Withdrawn: replaced with ISO 7137]
• ISO 2651 Environmental tests for aircraft equipment – Part 2.1: Temperature, pressure and humidity [Rejected draft]
• ISO 2652 Environmental tests for aircraft equipment – Part 2.2: Humidity (24 h cycle) [Rejected draft]
• ISO 2653:1975 Environmental tests for aircraft equipment
  • ISO 2653-1:1975 — Part 1: Ice formation [Withdrawn: replaced with ISO 7137]
• ISO 2655:1975 Environmental tests for aircraft equipment – Part 2.5: Waterproofness [Withdrawn: replaced with ISO 7137]
• ISO 2657:1976 Environmental tests for aircraft equipment – Part 2.7: Change of temperature [Withdrawn: replaced with ISO 7137]
• ISO 2658:1976 Environmental tests for aircraft equipment – Part 2.8: Mould growth [Withdrawn: replaced with ISO 7137]
• ISO 2659 Environmental tests for aircraft equipment – Part 2.9: Salt mist [Rejected draft]
• ISO 2663 Environmental tests for aircraft equipment – Part 2.13: Sealing tests [Rejected draft]
• ISO 2668 Environmental tests for aircraft equipment – Part 3.1: Vibration [Rejected draft]
• ISO 2669:1995 Environmental tests for aircraft equipment – Steady-state acceleration
• ISO 2671:1982 Environmental tests for aircraft equipment – Part 3.4: Acoustic vibration
• ISO 2676:1975 Environmental tests for aircraft equipment – Part 4.1: [Withdrawn: replaced with ISO 7137]
• ISO 2678:1985 Environmental tests for aircraft equipment — Insulation resistance and high voltage tests for electrical equipment
• ISO 2683 Environmental tests for aircraft equipment – Part 5.1: Explosion proofness [Rejected draft]
• ISO 2684:1974 Environmental tests for aircraft equipment – Part 5.2: Fluid contamination [Withdrawn: replaced with ISO 7137]
• ISO 2685:1998 Aircraft – Environmental test procedure for airborne equipment – Resistance to fire in designated fire zones
• ISO 2690:1973 Unrecorded magnetic tapes for instrumentation applications — Physical properties and test methods [Withdrawn without replacement]
• ISO 2691:1987 Photography — Expendable photoflash lamps (without integral reflector) — Defintions and requirements for luminous flux/time characteristics [Withdrawn without replacement]
• :2021 Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)
• ISO 2694: Pressure Wessels [rejected draft]
• ISO 2695:1976 Fibre building boards — Hard and medium boards for general purposes — Quality specifications — Appearance, shape and dimensional tolerances [Withdrawn without replacement]
• ISO 2696:1976 Fibre building boards — Hard and medium boards for general purposes — Quality specifications — Water absorption and swelling in thickness [Withdrawn without replacement]
• ISO 2697:1999 Diesel engines — Fuel nozzles — Size "S"
• ISO 2698:2016 Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
• ISO 2699:1994 Diesel engines — Flange-mounted fuel injectors, size "S" — Types 2, 3, 4, 5 and 6
• ISO 2700:1974 Road vehicles — Screw-mounted injection nozzle holders size "S" — Type 1 [Withdrawn without replacement]
• ISO 2701:1977 Drawn wire for general purpose non-alloy steel wire ropes — Terms of acceptance [Withdrawn without replacement]
• ISO 2702:1977 Heat-treated steel tapping screws — Mechanical properties
• ISO 2703:1973 Buried unplasticized polyvinyl chloride (PVC) pipes for the supply of gaseous fuels — Metric series — Specification [Withdrawn without replacement]
• ISO 2704:1998 Road vehicles — M10 x 1 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
• ISO 2705:2006 Road vehicles — M12 x 1,25 spark-plugs with flat seating and their cylinder head housings [Withdrawn without replacement]
• ISO 2706 Micrographics — Transparent A6 size microfiche of uniform division — Image arrangement No. 1 [Draft merged into ISO 2707]
• ISO 2707:1980 Micrographics — Transparent A6 size microfiche of uniform division — Image arrangements No. 1 and No. 2 [Withdrawn: replaced with ISO 9923]
• ISO 2708:1980 Micrographics — Transparent A6 size microfiche of variable division — Image arrangements A and B [Withdrawn: replaced with ISO 9923]
• ISO 2709:2008 Information and documentation – Format for information exchange
• ISO 2710 Reciprocating internal combustion engines – Vocabulary
  • ISO 2710-1:2000 Part 1: Terms for engine design and operation
  • ISO 2710-2:1999 Part 2: Terms for engine maintenance
• ISO 2711:1973 Information processing interchange – Representation of ordinal dates [Withdrawn: replaced by ISO 8601:1988]
• ISO 2712:1973 Copper and copper alloys — Rockwell superficial hardness test (N and T scales) [Withdrawn: replaced with ISO 1024]
• ISO 2713:1973 Copper and copper alloys — Rockwell hardness test (B, F and G scales) [Withdrawn: replaced with ISO 6508]
• ISO 2714:2017 Liquid hydrocarbons — Volumetric measurement by displacement meter
• ISO 2715:2017 Liquid hydrocarbons — Volumetric measurement by turbine flowmeter
• ISO 2716:1972 Freight containers — Coding and identification [Withdrawn: replaced with ISO 6346]
• ISO 2717:1973 Sulphuric acid and oleum for industrial use — Determination of lead content — Dithizone photometric method [Withdrawn without replacement]
• ISO 2718:1974 Standard layout for a method of chemical analysis by gas chromatography [Withdrawn without replacement]
• ISO 2719:2016 Determination of flash point — Pensky-Martens closed cup method
• ISO 2720:1974 Photography — General purpose photographic exposure meters (photoelectric type) — Guide to product specification
• ISO 2721:2013 Photography — Film-based cameras — Automatic controls of exposure
• ISO 2722:1997 Vitreous and porcelain enamels — Determination of resistance to citric acid at room temperature [Withdrawn: replaced with ISO 28706-1]
• ISO 2723:1995 Vitreous and porcelain enamels for sheet steel — Production of specimens for testing [Withdrawn: replaced with ISO 28764]
• ISO 2724:1973 Vitreous and porcelain enamels for cast iron — Production of specimens for testing [Withdrawn: replaced with ISO 28764]
• ISO 2725 Assembly tools for screws and nuts — Square drive sockets
• ISO 2725-1:2017 Part 1: Hand-operated sockets
• ISO 2725-2:2017 Part 2: Machine-operated sockets ("impact")
• ISO 2725-3:2017 Part 3: Machine-operated sockets ("non-impact")
• ISO 2726:1995 Woodworking tools — Metal-bodied bench planes, plane cutters and cap irons [Withdrawn without replacement]
• ISO 2727:1973 Modular units for machine tool construction — Headstocks
• ISO 2728:1982 Woodworking tools — Plane irons [Withdrawn: replaced with ISO 2726]
• ISO 2729:1995 Woodworking tools — Chisels and gouges
• ISO 2730:1973 Woodworking tools — Wooden bodied planes [Withdrawn without replacement]
• ISO 2731:1973 Dee shackles [Withdrawn: replaced with ISO 2415]
• ISO 2732:1984 Steel and cast iron — Determination of phosphorus content — Phosphovanadomolybdate spectrophotometric method [Withdrawn: replaced with ISO 10714]
• ISO 2733:1983 Vitreous and porcelain enamels — Apparatus for testing with acid and neutral liquids and their vapours [Withdrawn: replaced with ISO 28706-2]
• ISO 2734:1997 Vitreous and porcelain enamels — Apparatus for testing with alkaline liquids [Withdrawn: replaced with ISO 28706-4]
• ISO 2735:1973 Hermetically sealed metal food containers — Capacities and diameters of round open-top and vent hole cans for milk [Withdrawn: replaced with ISO 3004-6 (now replaced with ISO 10653 and 10654 and ISO/TR 11761, 11762, and 11776) and ISO/TR 8610]
• ISO 2736 Concrete tests — Test specimens
  • ISO 2736-1 Part 1: Sampling of fresh concrete [Withdrawn: replaced with ISO 1920-1]
  • ISO 2736-2 Part 2: Making and curing of test specimens for strength tests [Withdrawn: replaced with ISO 1920-3]
• ISO 2737:1973 Permeable sintered metal materials — Determination of oil content [Withdrawn: replaced with ISO 2738]
• ISO 2738:1999 Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity
• ISO 2739:2012 Sintered metal bushings — Determination of radial crushing strength
• ISO 2740:2009 Sintered metal materials, excluding hardmetals — Tensile test pieces
• ISO 2741:1973 Zinc alloys — Complexometric determination of magnesium [Withdrawn without replacement]
• ISO 2742:1998 Vitreous and porcelain enamels — Determination of resistance to boiling citric acid [Withdrawn: replaced with ISO 28706-2]
• ISO 2743:1986 Vitreous and porcelain enamels — Determination of resistance to condensing hydrochloric acid vapour [Withdrawn: replaced with ISO 28706-2]
• ISO 2744:1998 Vitreous and porcelain enamels — DDetermination of resistance to boiling water and water vapour [Withdrawn: replaced with ISO 28706-2]
• ISO 2745:1998 Vitreous and porcelain enamels — Determination of resistance to hot sodium hydroxide [Withdrawn: replaced with ISO 28706-4]
• ISO 2746:2015 Vitreous and porcelain enamels — High voltage test
• ISO 2747:1998 Vitreous and porcelain enamels — Enamelled cooking utensils — Determination of resistance to thermal shock
• ISO 2748:1983 Textile machinery and accessories — Lingoes for Jacquard weaving [Withdrawn without replacement]
• ISO 2749:1973 Urea for industrial use — Measurement of the pH of a solution of urea of conventional concentration (100 g/l) — Potentiometric method [Withdrawn without replacement]
• ISO 2750:1974 Urea for industrial use — Measurement of colour in Hazen units (platinum-cobalt scale) of a urea-formaldehyde solution [Withdrawn without replacement]
• ISO 2751:1973 Urea for industrial use — Determination of the buffer coefficient — Potentiometric method [Withdrawn without replacement]
• ISO 2752:1973 Urea for industrial use — Measurement of the variation of pH in the presence of formaldehyde — Potentiometric method [Withdrawn without replacement]
• ISO 2753:1973 Urea for industrial use — Determination of water content — Karl Fischer method [Withdrawn without replacement]
• ISO 2754:1973 Urea for industrial use — Determination of biuret content — Photometric method [Withdrawn without replacement]
• ISO 2755:1973 1,1,1- Trichloroethane for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2756:1973 Hexachlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2757:1973 1,2,4- Trichlorobenzene for industrial use — List of methods of test [Withdrawn without replacement]
• ISO 2758:2014 Paper — Determination of bursting strength
• ISO 2759:2014 Board — Determination of bursting strength
• ISO 2760:1975 Crude sodium borates for industrial use — Determination of total aluminium content — Titrimetric method [Withdrawn without replacement]
• ISO 2761:1975 Crude sodium borates for industrial use — Determination of total titanium content — Photometric method [Withdrawn without replacement]
• ISO 2762:1973 Hydrochloric acid for industrial use — Determination of soluble sulphates — Turbidimetric method
• ISO 2763 Data processing — Vocabulary — Part 02: Mathematics and logic, arithmetic and logical operations [Draft merged into ISO 2382]
• ISO 2764:1974 Terms and symbols for flight dynamics — Concepts, quantities and symbols used in the study of aircraft stability and control [Withdrawn: replaced with ISO 1151-4]
• ISO 2765:1974 Flight dynamics — Concepts, quantities and symbols — Quantities used in measurements [Withdrawn: replaced with ISO 1151-5]
• ISO 2766:1973 Single lifting hooks with shank — Capacity up to 25 tonnes — Grades M, P, S (T, V) — Hammer and drop forged hooks [Withdrawn without replacement]
• ISO 2767:1973 Surface treatments of metals — Anodic oxidation of aluminium and its alloys — Specular reflectance at 45 degrees — Total reflectance — Image clarity [Withdrawn: replaced with ISO 10215 and ISO 10216]
• ISO 2768 General tolerances
  • ISO 2768-1:1989 Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
  • ISO 2768-2:1989 Part 2: Geometrical tolerances for features without individual tolerance indications [Withdrawn: replaced with ISO 22081]
• ISO 2769:1973 Modular units for machine tool construction — Wing bases for slide units
• ISO 2770:1974 Tapping screws according to ISO/R 1478 to 1483 — Minimum and maximum lengths [Withdrawn without replacement]
• ISO 2771:1980 Iron ores — Determination of aluminium content — Oxine gravimetric and titrimetric methods [Withdrawn without replacement]
• ISO 2772:2019 Test conditions for box type vertical drilling machines — Testing of the accuracy
• ISO 2773 Test conditions for pillar type vertical drilling machines
  • ISO 2773-1:1973 Part 1: Geometrical tests
  • ISO 2773-2:1973 Part 2: Practical test
• ISO 2775:1977 Office machines and printing machines used for information processing – Widths of one-time paper or plastic printing ribbons and marking to indicate the end of the ribbons
• ISO 2776:1974 Modular co-ordination — Co-ordinating sizes for doorsets — External and internal [Withdrawn without replacement]
• ISO 2777:1974 Modular co-ordination — Co-ordinating sizes for rigid flat sheet boards used in building [Withdrawn without replacement]
• ISO/TR 2778:1977 Wrought aluminium and aluminium alloys — Drawn tubes — Mechanical properties [Withdrawn: replaced with ISO 6363-2]
• ISO 2779:1973 Aluminium machining alloys — Chemical composition and mechanical properties of alloys Al-Cu6 Bi Pb and Al-Cu4 Pb Mg [Withdrawn: replaced with ISO 209-1]
• ISO 2780:2018 Milling cutters with tenon drive — Interchangeability dimensions for cutter arbors — Metric series
• ISO 2781:2018 Rubber, vulcanized or thermoplastic — Determination of density
• ISO 2782 Rubber, vulcanized or thermoplastic — Determination of permeability to gases
  • ISO 2782-1:2016 Part 1: Differential-pressure methods
  • ISO 2782-2:2018 Part 2: Equal-pressure method
• ISO 2783:1975 Ebonite — Determination of hardness by means of a durometer [Withdrawn without replacement]
• ISO 2784:1974 Continuous forms used for information processing – Sizes and sprocket feed holes
• ISO 2785:1986 Directives for selection of asbestos-cement pipes subject to external loads with or without internal pressure [Withdrawn without replacement]
• ISO 2787:1984 Rotary and percussive pneumatic tools — Performance tests
• ISO 2788:1986 Documentation – Guidelines for the establishment and development of monolingual thesauri [Withdrawn: replaced by ISO 25964-1:2011]
• ISO 2789:2013 Information and documentation – International library statistics
• ISO 2790:2020 Belt drives — V-belts for the automotive industry and corresponding pulleys — Dimensions
• ISO 2791:1973 Bow shackles [Withdrawn: replaced with ISO 2415]
• ISO 2792 Dentistry – Vocabulary – Part 2 [Draft merged into ISO 1942]
• ISO 2793 Dentistry – Vocabulary – Part 3 [Draft merged into ISO 1942]
• ISO 2794 Dentistry – Vocabulary – Part 4 [Draft merged into ISO 1942]
• ISO 2795:2020 Plain bearings — Sintered bushes — Dimensions and tolerances
• ISO 2796:1986 Cellular plastics, rigid — Test for dimensional stability
• ISO 2797:2017 Textile glass — Rovings — Basis for a specification
• ISO 2798:1974 Plastics — Designation of copolymer resins of vinyl chloride [Withdrawn: replaced with ISO 1060-1]
• ISO/TR 2799:1978 Cellular plastics — Determination of the temperature at which fixed permanent deformation of rigid materials occurs under compressive load [Withdrawn: replaced with ISO 7616]
• ISO 2800:1973 Photography — Expendable photoflash lamps — Definition and evaluation of flashability [Withdrawn without replacement]
• ISO/TR 2801:2007 Clothing for protection against heat and flame — General recommendations for selection, care and use of protective clothing
• ISO 2802:1974 Textile machinery and accessories — Plastic travellers for spinning and twisting [Withdrawn: replaced with ISO 96-2]
• ISO 2803:1974 Photography — Silver-gelatin type microfilms — Processing and storage for archival purposes [Withdrawn: replaced with ISO 4331 and ISO 4332 (both replaced with ISO 10602, now replaced with ISO 18901), and ISO 5466 (now replaced with ISO 18911)]
• ISO 2804:1996 Wire, bar or tube drawing dies — As-sintered pellets of hardmetal (carbide) — Dimensions
• ISO 2805 Transliteration of the alphabets of non-Slavic languages using Cyrillic characters [Rejected draft]
• ISO 2806:1994 Industrial automation systems – Numerical control of machines – Vocabulary
• ISO 2808:2019 Paints and varnishes — Determination of film thickness
• ISO 2809:1976 Paints and varnishes — Determination of light fastness of paints for interior use [Withdrawn: replaced with ISO 11341, now replaced with ISO 16474-(1-2)]
• ISO 2810:2020 Paints and varnishes — Natural weathering of coatings — Exposure and assessment
• ISO 2811 Paints and varnishes — Determination of density
  • ISO 2811-1:2016 Part 1: Pycnometer method
  • ISO 2811-2:2011 Part 2: Immersed body (plummet) method
  • ISO 2811-3:2011 Part 3: Oscillation method
  • ISO 2811-4:2011 Part 4: Pressure cup method
• ISO 2812 Paints and varnishes — Determination of resistance to liquids
  • ISO 2812-1:2017 Part 1: Immersion in liquids other than water
  • ISO 2812-2:2018 Part 2: Water immersion method
  • ISO 2812-3:2019 Part 3: Method using an absorbent medium
  • ISO 2812-4:2017 Part 4: Spotting methods
  • ISO 2812-5:2018 Part 5: Temperature-gradient oven method
• ISO 2813:2014 Paints and varnishes — Determination of gloss value at 20°, 60° and 85°
• ISO 2814:1973 Paints and varnishes — Comparison of contrast ratio (hiding power) of paints of the same type and colour [Withdrawn without replacement]
• ISO 2815:2003 Paints and varnishes — Buchholz indentation test
• ISO 2816:1973 Fundamental characteristics of a system of shoe sizing to be known as Mondopoint [Withdrawn: replaced with ISO 9407]
• ISO 2817:1999 Tobacco and tobacco products — Determination of silicated residues insoluble in hydrochloric acid
• ISO 2818:2018 Plastics — Preparation of test specimens by machining
• ISO 2819:2017 Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion
• ISO 2820:1974 Leather — Raw hides of cattle and horses — Method of trim
• ISO 2821:1974 Leather — Raw hides of cattle and horses — Preservation by stack salting
• ISO 2822 Raw cattle hides and calf skins
  • ISO 2822-1:1998 Part 1: Descriptions of defects
• ISO 2823 Statistics — Vocabulary and symbols — Third series [Rejected draft merged into ISO 3534]
• ISO 2824 Symbolic designation of direction of closing and faces of doors, windows and shutters — Part 2 [Rejected draft]
• ISO 2825:1981 Spices and condiments — Preparation of a ground sample for analysis
• ISO 2826:1974 Apricots — Guide to cold storage
• ISO 2827:1988 Photography — Electronic flash equipment — Determination of light output and performance
• ISO 2828:1973 Aluminium oxide primarily used for the production of aluminium — Determination of fluorine content — Alizarin complexone and lanthanum chloride spectrophotometric method
• ISO 2829:1973 Aluminium oxide primarily used for the production of aluminium — Determination of phosphorus content — Reduced phosphomolybdate spectrophotometric method
• ISO 2830:1973 Cryolite, natural and artificial — Determination of aluminium content — Atomic absorption method
• ISO 2831:1973 Sodium fluoride for industrial use — Determination of water-insoluble matter
• ISO 2832:1973 Sodium fluoride for industrial use — Determination of moisture content
• ISO 2833:1973 Sodium fluoride for industrial use — Determination of fluorine content — Modified Willard-Winter method
• ISO 2834 Graphic technology — Laboratory preparation of test prints
• ISO 2834-1:2020 Part 1: Paste inks
• ISO 2834-2:2015 Part 2: Liquid printing inks
• ISO 2834-3:2008 Part 3: Screen printing inks
• ISO 2835:1974 Prints and printing inks — Assessment of light fastness [Withdrawn without replacement]
• ISO 2836:2021 Graphic technology — Prints and printing inks — Assessment of resistance of prints to various agents
• ISO 2837:1996 Graphic technology — Prints and printing inks — Assessment of resistance to solvents [Withdrawn: replaced with ISO 2836]
• ISO 2838:1974 Prints and printing inks — Assessment of resistance to alkalis [Withdrawn: replaced with ISO 2836]
• ISO 2839:1974 Prints and printing inks — Assessment of resistance to soaps [Withdrawn: replaced with ISO 2836]
• ISO 2840:1974 Prints and printing inks — Assessment of resistance of prints to detergents [Withdrawn: replaced with ISO 2836]
• ISO 2841:1974 Prints and printing inks — Assessment of resistance of prints to cheese [Withdrawn: replaced with ISO 2836]
• ISO 2842:1974 Prints and printing inks — Assessment of resistance of prints to edible oils [Withdrawn: replaced with ISO 2836]
• ISO 2843:1974 Prints and printing inks — Assessment of resistance of prints to impregnation by wax or paraffin wax [Withdrawn: replaced with ISO 2836]
• ISO 2844:1974 Prints and printing inks — Assessment of resistance of prints to spices [Withdrawn: replaced with ISO 2836]
• ISO 2845:1975 Set of printing inks for letterpress printing — Colorimetric characteristics [Withdrawn: replaced with ISO 2846-1]
• ISO 2846 Graphic technology — Colour and transparency of printing ink sets for four-colour printing (originally Set of printing inks for offset printing — Colorimetric characteristics)
  • ISO 2846-1:2017 Part 1: Sheet-fed and heat-set web offset lithographic printing
  • ISO 2846-2:2007 Part 2: Coldset offset lithographic printing
• ISO 2848:1984 Building construction – Modular coordination – Principles and rules
• ISO 2849 Building construction – Modular coordination – Modules for vertical dimensions [Rejected draft]
• ISO 2850:1973 Potassium sulphate for industrial use — Determination of loss of mass at 105 degrees C [Withdrawn without replacement]
• ISO 2851:1993 Stainless steel bends and tees for the food industry [Withdrawn without replacement]
• ISO 2852:1993 Stainless steel clamp pipe couplings for the food industry [Withdrawn without replacement]
• ISO 2853:1993 Stainless steel threaded couplings for the food industry [Withdrawn without replacement]
• ISO 2854:1976 Statistical interpretation of data – Techniques of estimation and tests relating to means and variances
• ISO 2855:1976 Radioactive materials — Packagings — Test for contents leakage and radiation leakage [Withdrawn without replacement]
• ISO 2856:1981 Elastomers — General requirements for dynamic testing [Withdrawn: replaced with ISO 4664]
• ISO 2857:1973 Ground thread taps for ISO metric threads of tolerances 4H to 8H and 4G to 6G coarse and fine pitches — Manufacturing tolerances on the threaded portion
• ISO 2858:1975 End-suction centrifugal pumps (rating 16 bar) — Designation, nominal duty point and dimensions
• ISO 2859 Sampling procedures for inspection by attributes
  • ISO 2859-1:1999 Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
  • ISO 2859-2:2020 Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
  • ISO 2859-3:2005 Part 3: Skip-lot sampling procedures
  • ISO 2859-4:2020 Part 4: Procedures for assessment of declared quality levels
  • ISO 2859-5:2005 Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection
  • ISO 2859-10:2006 Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes [Withdrawn: replaced with ISO 28590]
• ISO 2860:1992 Earth-moving machinery — Minimum access dimensions
• ISO 2861:2020 Vacuum technology — Dimensions of clamped-type quick-release couplings
• ISO 2862:1974 Cinematography — Single-track magnetic sound record on 35 mm motion-picture films — Position and dimensions [Withdrawn without replacement]
• ISO 2863:1973 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Run length of film — Dimensions and specifications [Withdrawn without replacement]
• ISO 2864:1974 Interchangeable magnetic six-disk pack — Physical and magnetic characteristics [Withdrawn without replacement]
• ISO 2865:1973 Aluminium oxide primarily used for the production of aluminium — Determination of boron content — Curcumin spectrophotometric method
• ISO 2866:1974 Sulphur for industrial use — Determination of total carbon content — Titrimetric method [Withdrawn without replacement]
• ISO 2867:2011 Earth-moving machinery — Access systems
• ISO 2868:1973 Surface active agents — Detergents — Anionic-active matter stable to acid hydrolysis — Determination of trace amounts
• ISO 2869:1973 Surface active agents — Detergents — Anionic-active matter hydrolyzable under alkaline conditions — Determination of hydrolyzable and non-hydrolyzable anionic-active matter
• ISO 2870:2009 Surface active agents — Detergents — Determination of anionic-active matter hydrolysable and non-hydrolysable under acid conditions
• ISO 2871 Surface active agents — Detergents — Determination of cationic-active matter content
  • ISO 2871-1:2010 Part 1: High-molecular-mass cationic-active matter
  • ISO 2871-2:2010 Part 2: Cationic-active matter of low molecular mass (between 200 and 500)
• ISO 2872:1985 Packaging — Complete, filled transport packages — Compression test [Withdrawn: replaced with ISO 12048]
• ISO 2873:2000 Packaging — Complete, filled transport packages and unit loads — Low pressure test
• ISO 2874:1985 Packaging — Complete, filled transport packages — Stacking test using compression tester [Withdrawn: replaced with ISO 12048]
• ISO 2875:2000 Packaging — Complete, filled transport packages and unit loads — Water-spray test
• ISO 2876:1985 Packaging — Complete, filled transport packages — Rolling test
• ISO 2877:1974 Sulphuric acid for industrial use — Determination of chlorides content — Potentiometric method [Withdrawn without replacement]
• ISO 2878:2017 Rubber, vulcanized or thermoplastic — Antistatic and conductive products — Determination of electrical resistance
• ISO 2879:1975 Glycerine for industrial use — Determination of glycerol content — Titrimetric method [Withdrawn without replacement]
• ISO 2880 Determination of Sound Power Emitted by Sma 11 Noise Sources in Reverberation Rooms — Part 1: Broad Band Sources [Rejected draft]
• ISO 2881:1992 Tobacco and tobacco products — Determination of alkaloid content — Spectrometric method
• ISO 2882:1979 Rubber, vulcanized — Antistatic and conductive products for hospital use — Electrical resistance limits [Withdrawn without replacement]
• ISO 2883:1980 Rubber, vulcanized — Antistatic and conductive products for industrial use — Electrical resistance limits [Withdrawn without replacement]
• ISO 2884 Paints and varnishes — Determination of viscosity using rotary viscometers
  • ISO 2884-1:1999 Part 1: Cone-and-plate viscometer operated at a high rate of shear
  • ISO 2884-2:2003 Part 2: Disc or ball viscometer operated at a specified speed
• ISO 2885:1973 Acetaldehyde for industrial use — Determination of total content of carbonyl compounds — Volumetric method [Withdrawn without replacement]
• ISO 2886:1973 Acetaldehyde for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
• ISO 2887:1973 secButyl alcohol, methyl ethyl ketone, isobutyl methyl ketone, isoamyl ethyl ketone, diacetone alcohol and hexylene glycol for industrial use — Determination of acidity to phenolphthalein — Volumetric method [Withdrawn without replacement]
• ISO 2888:1973 Furfural for industrial use — Determination of acidity to phenolphthalein — Volumetric method [Withdrawn without replacement]
• ISO 2889:2021 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities
• ISO 2890:1973 Road vehicles — Vacuum braking for caravans and light trailers [Withdrawn without replacement]
• ISO 2891:1977 Modular units for machine tool construction — Centre bases and columns [Withdrawn without replacement]
• ISO 2892:2007 Austenitic cast irons — Classification
• ISO 2893 General Methods of Test for Pigments — Comparison of Ease of Dispersion (Oscillatory Shaking Method) [Rejected Draft]
• ISO 2894:1980 Embossed credit cards — Specifications, numbering system and registration procedure [Withdrawn: replaced with ISO 7810, ISO 7811-(1-5), and ISO/IEC 7813]
• ISO 2895:1974 Cinematography — Screen luminance for review room projection of motion-picture film intended for indoor theatres [Withdrawn: replaced with ISO 2910]
• ISO 2896:2001 Rigid cellular plastics — Determination of water absorption
• ISO 2897:1976 Plastics — Designation of impact-resistant polystyrenes [Withdrawn without replacement]
• ISO 2898 Plastics — Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials
  • ISO 2898-1:1996 Part 1: Designation system and basis for specifications [Withdrawn: replaced with ISO 24023-1]
  • ISO 2898-2:2008 Part 2: Preparation of test specimens and determination of properties [Withdrawn: replaced with ISO 24023-2]
• ISO 2899:1974 Sulphuric acid and oleums for industrial use — Determination of ammoniacal nitrogen content — Spectrophotometric method [Withdrawn without replacement]
• ISO 2900:1973 Potassium Hydroxide for Industrial Use - Determination of Carbon Dioxide Content - Titrimetric Method [Withdrawn without replacement]
• ISO 2901:2016 ISO metric trapezoidal screw threads — Basic and design profiles
• ISO 2902:2016 ISO metric trapezoidal screw threads — General plan
• ISO 2903:2016 ISO metric trapezoidal screw threads — Tolerances
• ISO 2904:2020 ISO metric trapezoidal screw threads — Basic dimensions
• ISO 2905:1985 Modular units for machine tool construction — Spindle noses and adjustable adaptors for multi-spindle heads
• ISO 2906:2002 Cinematography — Image area produced by camera aperture on 35 mm motion-picture film — Position and dimensions
• ISO 2907:2002 Cinematography — Maximum projectable image area on 35 mm motion-picture film — Position and dimensions
• ISO 2908:1974 Petroleum waxes — Determination of oil content [Withdrawn without replacement]
• ISO 2909:2002 Petroleum products — Calculation of viscosity index from kinematic viscosity
• ISO 2910:2018 Cinematography — Screen luminance and chrominance for the projection of film motion pictures
• ISO 2911:2004 Sweetened condensed milk — Determination of sucrose content — Polarimetric method
• ISO 2912:1973 Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions
• ISO 2913:1975 Wool — Colorimetric determination of cystine plus cysteine in hydrolysates
• ISO 2915:1975 Wool — Determination of cysteic acid content of wool hydrolysates by paper electrophoresis and colorimetry
• ISO 2916:1975 Wool — Determination of alkali content
• ISO 2917:1999 Meat and meat products — Measurement of pH — Reference method
• ISO 2918:1975 Meat and meat products — Determination of nitrite content (Reference method)
• ISO 2919:2012 Radiological protection — Sealed radioactive sources — General requirements and classification
• ISO 2920:2004 Whey cheese — Determination of dry matter (Reference method)
• ISO 2921:2019 Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)
• ISO 2922:2020 Acoustics – Measurement of airborne sound emitted by vessels on inland waterways and harbours
• ISO 2923:1996 Acoustics – Measurement of noise on board vessels
• ISO 2924:1973 Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm
• ISO 2925:1973 Aluminium fluoride for industrial use – Preparation and storage of test samples [Withdrawn without replacement]
• ISO 2926:2013 Aluminium oxide used for the production of primary aluminium — Particle size analysis for the range 45 µm to 150 µm — Method using electroformed sieves
• ISO 2927:1973 Aluminium oxide primarily used for the production of aluminium — Sampling
• ISO 2928:2021 Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 2,5 MPa (25 bar) — Specification
• ISO 2929:2021 Rubber hoses and hose assemblies for bulk fuel delivery by truck — Specification
• ISO 2930:2017 Rubber, raw natural — Determination of plasticity retention index (PRI)
• ISO 2931:2017 Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
• ISO 2932:1981 Anodizing of aluminium and its alloys — Assessment of sealing quality by measurement of the loss of mass after immersion in acid solution [Withdrawn without replacement]
• ISO 2933:1974 Bonded abrasive products — Grinding wheel dimensions (Part 3) [Withdrawn: replaced with ISO 603-(1-16)]
• ISO 2934:1973 Modular units for machine tool construction — Wing base for columns
• ISO 2935:1974 Circular saw blades for woodworking — Dimensions
• ISO 2936:2014 Assembly tools for screws and nuts — Hexagon socket screw keys
• ISO 2937:1974 Plain end seamless steel tubes for mechanical application [Withdrawn without replacement]
• ISO 2938:1974 Hollow steel bars for machining [Withdrawn without replacement]
• ISO 2939:2015 Cinematography — Picture image area on 35 mm motion-picture release prints — Position and dimensions and analogue and digital photographic sound to picture record displacement
• ISO 2940 Milling cutters mounted on centring arbors having a 7/24 taper
  • ISO 2940-1:1974 Fitting dimensions — Centring arbors
  • ISO 2940-2:1974 Inserted tooth cutters
• ISO 2941:2009 Hydraulic fluid power — Filter elements — Verification of collapse/burst pressure rating
• ISO 2942:2018 Hydraulic fluid power — Filter elements — Verification of fabrication integrity and determination of the first bubble point
• ISO 2943:1998 Hydraulic fluid power — Filter elements — Verification of material compatibility with fluids
• ISO 2944:2000 Fluid power systems and components — Nominal pressures
• ISO 2945 Bases for the design of structures [Rejected draft, but partly covered by ISO 4356]
• ISO 2946 Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms [Draft renamed ISO 3742]
• ISO 2947:1973 Textiles — Integrated conversion table for replacing traditional yarn numbers by rounded values in the Tex System
• ISO 2948 Brown coals and lignites — Extensive method of analysis of ash [Rejected draft]
• ISO 2949 Brown coals and lignites — Analysis of ash [Rejected draft]
• ISO 2950:1974 Brown coals and lignites — Classification by types on the basis of total moisture content and tar yield
• ISO 2951:2019 Rubber, vulcanized rubber — Determination of insulation resistance
• ISO 2953:1999 Mechanical vibration — Balancing machines — Description and evaluation [Withdrawn: replaced with ISO 21940-21]
• ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery – Requirements for instruments for measuring vibration severity
• ISO 2955:1983 Information processing — Representation of SI and other units in systems with limited character sets [Withdrawn without replacement]
• ISO 2958:1973 Road vehicles — Exterior protection for passenger cars
• ISO 2959:2011 Textiles — Woven fabric descriptions
• ISO 2960:1974 Textiles — Determination of bursting strength and bursting distension — Diaphragm method [Withdrawn: replaced with ISO 13938-1]
• ISO 2961:1974 Aluminium oxide primarily used for the production of aluminium — Determination of an adsorption index
• ISO 2962:2010 Cheese and processed cheese products — Determination of total phosphorus content — Molecular absorption spectrometric method
• ISO/TS 2963:2006 Cheese and processed cheese products — Determination of citric acid content — Enzymatic method
• ISO 2964:1985 Aerospace — Tubing — Outside diameters and thicknesses — Metric dimensions
• ISO 2965:2019 Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having a discrete or oriented permeable zone and materials with bands of differing permeability — Determination of air permeability
• ISO 2966:1988 Cinematography — 16 mm motion-picture film perforated 8 mm Type S (1-3) and (1-4) — Cutting and perforating dimensions [Withdrawn without replacement]
• ISO 2967:1982 Cinematography — Magnetic stripes for sound records on 35 mm motion-picture film perforated 8 mm Type S-5R (1-3-5-7-0) — Positions and width dimensions [Withdrawn without replacement]
• ISO 2968:1981 Cinematography — Recorded characteristics for magnetic sound record on 8 mm Type S motion- picture prints and full-coat magnetic film perforated 8 mm Type S — Specifications [Withdrawn without replacement]
• ISO 2969:2015 Cinematography — B-chain electro-acoustic response of motion-picture control rooms and indoor theatres — Specifications and measurements
• ISO 2970:1974 Cheese — determination of chloride content [Withdrawn without replacement]
• ISO 2971:2013 Cigarettes and filter rods — Determination of nominal diameter — Method using a non-contact optical measuring apparatus
• ISO 2972:1979 Numerical control of machines – Symbols
• ISO 2973 Freight containers [Rejected Draft[
• ISO 2974:2018 Diesel engines — 60° female cones for high-pressure fuel injection components
• ISO 2975 Measurement of water flow in closed conduits – Tracer methods
  • ISO 2975-1:1974 Part 1: General
  • ISO 2975-2:1975 Part 2: Constant rate injection method using non-radioactive tracers
  • ISO 2975-3:1976 Part 3: Constant rate injection method using radioactive tracers
  • ISO 2975-6:1977 Part 6: Transit time method using non-radioactive tracers
  • ISO 2975-7:1977 Part 7: Transit time method using radioactive tracers
• ISO 2976:2005 Coated abrasives — Abrasive belts — Selection of width/length combinations
• ISO 2977:1997 Petroleum products and hydrocarbon solvents — Determination of aniline point and mixed aniline point
• ISO 2979 Aircraft — Design of intermodal containers [Rejected draft]
• ISO 2982 Rolling bearings — Accessories
  • ISO 2982-1:2013 Part 1: Dimensions for adapter sleeve assemblies and withdrawal sleeves
  • ISO 2982-2:2013 Part 2: Dimensions for locknuts and locking devices
• ISO 2983:1975 Rolling bearings — Locknuts, wide series, and lockwashers with bent inner tab [Withdrawn without replacement]
• ISO 2990:1974 Nitric acid for industrial use — Evaluation of the nitric acid concentration by measurement of density [Withdrawn without replacement]
• ISO 2991:1974 Nitric acid for industrial use — Determination of ammoniacal nitrogen content — Spectrophotometric method [Withdrawn without replacement]
• ISO 2992:1974 Ammonium sulphate for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method
• ISO 2993:1974 Ammonium sulphate for industrial use — Determination of free acidity — Titrimetric method
• ISO 2994:1974 Ammonium sulphate for industrial use — Determination of matter insoluble in water — Gravimetric method [Withdrawn without replacement]
• ISO 2995:1974 Ammonium nitrate for industrial use — Determination of matter insoluble in water — Gravimetric method [Withdrawn without replacement]
• ISO 2996:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of particle size distribution by mechanical sieving [Withdrawn without replacement]
• ISO 2997:1974 Phosphoric acid for industrial use — Determination of sulphate content — Method by reduction and titrimetry
• ISO 2998:1974 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of orthophosphate content — Photometric method using the reduced molybdophosphate [Withdrawn without replacement]
• ISO 2999:1974 Sodium pyrophosphate for industrial use — Estimation of pyrophosphate content — Potentiometric method [Withdrawn without replacement]

ISO 3000 – ISO 3199[]

• ISO 3000:1974 Sodium tripolyphosphate for industrial use — Estimation of tripolyphophate content — Tris(ethylenediamine) cobalt (III) chloride gravimetric method [Withdrawn without replacement]
• ISO 3001:1999 Plastics — Epoxy compounds — Determination of epoxy equivalent
• ISO 3002 Basic quantities in cutting and grinding
  • ISO 3002-1:1982 Part 1: Geometry of the active part of cutting tools – General terms, reference systems, tool and working angles, chip breakers
  • ISO 3002-2:1982 Part 2: Geometry of the active part of cutting tools – General conversion formulae to relate tool and working angles
  • ISO 3002-3:1984 Part 3: Geometric and kinematic quantities in cutting
  • ISO 3002-4:1984 Part 4: Forces, energy, power
  • ISO 3002-5:1989 Part 5: Basic terminology for grinding processes using grinding wheels
• ISO 3003:1974 Dried-milk borers [Withdrawn: replaced with ISO 707]
• ISO 3004 Light gauge metal containers — Capacities and related cross-sections
  • ISO 3004-1:1986 Part 1: Open-top cans for general food [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
  • ISO 3004-2:1989 Part 2: Open-top cans for meat and products containing meat for human consumption [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
  • ISO 3004-3:1986 Part 3: Open-top cans for drinks
  • ISO 3004-4:1986 Part 4: Open-top cans for edible oil [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
  • ISO 3004-5:1988 Part 5: Open-top cans for fish and other fishery products [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
  • ISO 3004-6:1986 Part 6: Open-top cans for milk [Withdrawn: replaced with ISO 10653, ISO 10654, ISO/TR 11761, ISO/TR 11762, and ISO/TR 11776]
• ISO 3005:1978 Textiles — Determination of dimensional change of fabrics induced by free-steam
• ISO 3006:2015 Road vehicles — Passenger car wheels for road use — Test methods
• ISO 3007:1999 Petroleum products and crude petroleum — Determination of vapour pressure — Reid method
• ISO 3008 Fire resistance tests — Door and shutter assemblies
  • ISO 3008-1:2019 Part 1: General requirements
  • ISO 3008-2:2017 Part 2: Lift landing door assemblies
  • ISO 3008-3:2016 Part 3: Door and shutter assemblies horizontally oriented
  • ISO 3008-4:2021 Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction
• ISO 3009:2003 Fire-resistance tests — Elements of building construction — Glazed elements
• ISO 3010:2017 Bases for design of structures — Seismic actions on structures
• ISO 3011:2021 Rubber- or plastics-coated fabrics — Determination of resistance to ozone cracking under static conditions
• ISO 3012:1999 Petroleum products — Determination of thiol (mercaptan) sulfur in light and middle distillate fuels — Potentiometric method
• ISO 3013:1997 Petroleum products — Determination of the freezing point of aviation fuels
• ISO 3014:1993 Petroleum products — Determination of the smoke point of kerosine
• ISO 3015:2019 Petroleum and related products from natural or synthetic sources — Determination of cloud point
• ISO 3016:2019 Petroleum and related products from natural or synthetic sources — Determination of pour point
• ISO 3017:1981 Abrasive discs — Designation, dimensions and tolerances — Selection of disc outside diameter/centre hole diameter combinations [Withdrawn: replaced with ISO 21950]
• ISO 3018:1974 Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions
• ISO 3019 Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors
  • ISO 3019-1:2001 Part 1: Inch series shown in metric units
  • ISO 3019-2:2001 Part 2: Metric series
  • ISO 3019-3:1988 Part 3: Polygonal flanges (including circular flanges) [Withdrawn: replaced with ISO 3019-2:2001]
• ISO/AWI 3020 Agricultural tractors and self-propelled sprayers — Protection of the Operator (driver) against hazardous substances [Under development]
  • ISO 3020-1 Part 1: Terminology and overview [Under development]
  • ISO 3020-2 Part 2: Cab and HVAC design concepts [Under development]
  • ISO 3020-3 Part 3: Classification, requirements and test procedures [Under development]
  • ISO 3020-4 Part 4: Filters – Requirements and test procedures [Under development]
  • ISO 3020-5 Part 5: System validation [Under development]
• ISO 3021 Adventure tourism — Hiking and trekking activities — Requirements and recommendations [Under development]
• ISO 3022:1988 Cinematography — 35 mm motion-picture film perforated 16 mm (1-3-0) — Cutting and perforating dimensions
• ISO 3023:1995 Cinematography — 65 mm and 70 mm unexposed motion-picture film — Cutting and perforating dimensions
• ISO 3024:1983 Cinematography — Motion-picture camera cartridge, 8 mm type S, model 1 — Camera run length, perforation cut-out and end-of-run notch in film — Specifications
• ISO 3025:1974 Cinematography — Motion-picture camera cartridge, 8 mm Type S, Model II — Film load position [Withdrawn without replacement]
• ISO 3026:1992 Cinematography — Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S, 2R-4.227 (1664) or 5R-4.234 (1667) — Position and dimensions
• ISO 3027:1984 Cinematography — Magnetic stripes and recording head gaps for sound record on 8 mm Type S motion-picture films — Position and width dimensions [Withdrawn without replacement]
• ISO 3028:1984 Photography — Camera flash illuminants — Determination of ISO spectral distribution index (ISO/SDI)
• ISO 3029:1995 Photography – 126-size cartridges – Dimensions of cartridge, film and backing paper [Withdrawn without replacement]
• ISO 3030:2011 Rolling bearings — Radial needle roller and cage assemblies — Boundary dimensions and tolerances
• ISO 3031:2021 Rolling bearings — Thrust needle roller and cage assemblies, thrust washers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
• ISO 3033 Oil of spearmint
  • ISO 3033-1:2005 Part 1: Native type (Mentha spicata L.)
  • ISO 3033-2:2005 Part 2: Chinese type (80 % and 60 %) (Mentha viridis L. var. crispa Benth.), redistilled oil
  • ISO 3033-3:2005 Part 3: Indian type (Mentha spicata L.), redistilled oil
  • ISO 3033-4:2005 Part 4: Scotch variety (Mentha x gracilis Sole)
• ISO 3034:2011 Corrugated fibreboard — Determination of single sheet thickness
• ISO 3035:2011 Corrugated fibreboard — Determination of flat crush resistance
• ISO 3036:1975 Board — Determination of puncture resistance
• ISO 3037:2013 Corrugated fibreboard — Determination of edgewise crush resistance (unwaxed edge method)
• ISO 3038:1975 Corrugated fibreboard — Determination of the water resistance of the glue bond by immersion
• ISO 3039:2010 Corrugated fibreboard — Determination of grammage of the component papers after separation
• ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
• ISO 3041:1975 Welding requirements — Categories of service requirements for welded joints [Withdrawn without replacement]
• ISO 3042:1992 Cinematography — Labelling of containers for raw-stock motion-picture films and magnetic films — Minimum information specifications
• ISO 3043:1975 Oil of pimento berry [Withdrawn without replacement]
• ISO 3044:2020 Essential oil of Corymbia citriodora (Hook.) K.D. Hill and L.A.S. Johnson (syn. Eucalyptus citriodora Hook.)
• ISO 3045:2004 Oil of bay [Pimenta racemosa (Mill.) J.W. Moore]
• ISO 3046 Reciprocating internal combustion engines – Performance
  • ISO 3046-1:2002 Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use
  • ISO 3046-2:1987 Part 2: Test methods [Withdrawn: replaced with ISO 3046-1:2002]
  • ISO 3046-3:2006 Part 3: Test measurements
  • ISO 3046-4:2009 Part 4: Speed governing
  • ISO 3046-5:2001 Part 5: Torsional vibrations
  • ISO 3046-6:2020 Part 6: Overspeed protection
  • ISO 3046-7:1995 Part 7: Codes for engine power [Withdrawn: replaced with ISO 3046-1:2002]
• ISO 3047:1982 Cinematography — Spool, daylight loading type, for 35 mm motion-picture cameras (capacity 30 m - 100 ft) — Dimensions
• ISO 3048:1974 Gypsum plasters — General test conditions [Withdrawn without replacement]
• ISO 3049:1974 Gypsum plasters — Determination of physical properties of powder [Withdrawn without replacement]
• ISO 3051:1974 Gypsum plasters — Determination of mechanical properties [Withdrawn without replacement]
• ISO 3052:1974 Gypsum plasters — Determination of water of crystallization content [Withdrawn without replacement]
• ISO 3053:2004 Oil of grapefruit (Citrus x paradisi Macfad.), obtained by expression
• ISO 3054:2017 Essential oil of lavandin Abrial (Lavandula angustifolia Mill. × Lavandula latifolia Medik.), French type
• ISO 3055:2021 Kitchen equipment — Coordinating sizes
• ISO 3056:1986 Non-calibrated round steel link lifting chain and chain slings — Use and maintenance
• ISO 3057:1998 Non-destructive testing — Metallographic replica techniques of surface examination
• ISO 3058:1998 Non-destructive testing — Aids to visual inspection — Selection of low-power magnifiers
• ISO 3059:2012 Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
• ISO 3060:1974 Textiles — Cotton fibres — Determination of breaking tenacity of flat bundles
• ISO 3061:2008 Oil of black pepper (Piper nigrum L.)
• ISO 3062:1974 Oil of sandalwood (Eucarya spicata), Australia [Withdrawn without replacement]
• ISO 3063:2004 Oil of ylang-ylang (Cananga odorata (Lam.) Hook. f. et Thomson forma genuina)
• ISO 3064:2015 Essential oil of petitgrain, Paraguayan type (Citrus aurantium L. var. Paraguay (syn. Citrus aurantium var. bigaradia Hook f.))
• ISO 3065:2021 Essential oil of Eucalyptus, Australian type
• ISO 3066:1986 Duplicating machines — Registration [Withdrawn without replacement]
• ISO 3067:1983 Cinematography — Motion-picture camera cartridge, 8 mm Type S, Model I — Notches for film speed, film identification and colour-balancing filter — Dimensions and positions [Withdrawn without replacement]
• ISO 3068:1982 Cinematography — Magnetic stripes for sound records on 16 mm motion-picture film perforated 8 mm Type S-2R (1-4) and (1-3) — Positions and width dimensions [Withdrawn without replacement]
• ISO 3069:2000 End-suction centrifugal pumps — Dimensions of cavities for mechanical seals and for soft packing
• ISO 3070 Machine tools — Test conditions for testing the accuracy of boring and milling machines with horizontal spindle
  • ISO 3070-0:1982 Part 0: Introduction [Withdrawn: replaced with ISO 3070-(1-3):2007]
  • ISO 3070-1:2007 Part 1: Machines with fixed column and movable table
  • ISO 3070-2:2016 Part 2: Machines with movable column along the X-axis (floor type)
  • ISO 3070-3:2007 Part 3: Machines with movable column and movable table
• ISO 3071:2020 Textiles — Determination of pH of aqueous extract
• ISO 3072:1975 Wool — Determination of solubility in alkali
• ISO 3073:1975 Wool — Determination of acid content
• ISO 3074:2014 Wool — Determination of dichloromethane-soluble matter in combed sliver
• ISO 3075:1980 Short link chain for lifting purposes — Grade S (6) non calibrated, for chain slings etc. [Withdrawn without replacement]
• ISO 3076:2012 Round steel short link chains for general lifting purposes — Medium tolerance sling chains for chain slings — Grade 8
• ISO 3077:2001 Short-link chain for lifting purposes — Grade T, (types T, DAT and DT), fine-tolerance hoist chain
• ISO 3078:2016 Shipbuilding — Cargo winches
• ISO 3079 A two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions [Under development]
• ISO 3080:1974 Guide for the mechanical balancing of marine main steam turbine machinery for merchant service [Withdrawn without replacement]
• ISO 3081:1986 Iron ores — Increment sampling — Manual method [Withdrawn: replaced with ISO 3082]
• ISO 3082:2017 Iron ores – Sampling and sample preparation procedures
• ISO 3083:1986 Iron ores — Preparation of samples — Manual method [Withdrawn: replaced with ISO 3082]
• ISO 3084:1998 Iron ores — Experimental methods for evaluation of quality variation
• ISO 3085:2019 Iron ores — Experimental methods for checking the precision of sampling, sample preparation and measurement
• ISO 3086:2006 Iron ores — Experimental methods for checking the bias of sampling
• ISO 3087:2020 Iron ores — Determination of the moisture content of a lot
• ISO 3088:1975 Welding requirements — Factors to be considered in specifying requirements for fusion welded joints in steel (technical influencing factors) [Withdrawn without replacement]
• ISO 3089:2005 Machine tools — Test conditions for self-centring, manually operated chucks with one-piece jaws
• ISO 3090:1974 Ropes and cordage — Netting yarns — Determination of change in length after immersion in water [Withdrawn without replacement]
• ISO 3091:1975 Meat and meat products — Determination of nitrate content (Reference method)
• ISO/CIE 3092 Light and lighting – Energy performance of lighting in buildings – Explanation and justification of ISO/CIE 20086 [Under development]
• ISO 3093:2009 Wheat, rye and their flours, durum wheat and durum wheat semolina — Determination of the falling number according to Hagberg-Perten
• ISO 3094:1974 Fruit and vegetable products — Determination of copper content — Photometric method [Withdrawn without replacement]
• ISO 3095:2013 Acoustics – Railway applications – Measurement of noise emitted by railbound vehicles
• ISO 3096:2018 Rolling bearings — Needle rollers — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
• ISO/R 3097:1974 Rolling bearings — Needle rollers — Light and medium series — Dimensions and tolerance values [Withdrawn: replaced with ISO 1206]
• ISO 3098 Technical product documentation – Lettering
  • ISO 3098-1:2015 Part 1: General requirements
  • ISO 3098-2:2000 Part 2: Latin alphabet, numerals and marks
  • ISO 3098-3:2000 Part 3: Greek alphabet
  • ISO 3098-4:2000 Part 4: Diacritical and particular marks for the Latin alphabet
  • ISO 3098-5:1997 Part 5: CAD lettering of the Latin alphabet, numerals and marks
  • ISO 3098-6:2000 Part 6: Cyrillic alphabet
• ISO 3099:1974 Oilseed residues — Determination of total nitrogen content [Withdrawn without replacement]
• ISO 3100 Meat and meat products — Sampling and preparation of test samples
  • ISO 3100-1:1991 Part 1: Sampling [Withdrawn: replaced with ISO 17604]
  • ISO 3100-2:1998 Part 2: Preparation of test samples for microbiological examination [Withdrawn: replaced with ISO 6887-2]
• ISO 3101:1981 Wheels and castors — Triangular top plates with three fixing holes [Withdrawn: replaced with ISO 22883 and ISO 22884]
• ISO 3102:1981 Wheels and castors for non-powered equipment — Off-set for swivel castors [Withdrawn: replaced with ISO 22883 and ISO 22884]
• ISO 3103 Tea – Preparation of liquor for use in sensory tests
• ISO 3104:2020 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
• ISO 3105:1994 Glass capillary kinematic viscometers – Specifications and operating instructions
• ISO 3106:1974 Dental zinc oxide/eugenol filling materials [Withdrawn: replaced with ISO 3107]
• ISO 3107:2011 Dentistry — Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements
• ISO 3108:2017 Steel wire ropes — Test method — Determination of measured breaking force
• ISO 3109:1984 Assembly tools for screws and nuts — Hexagon insert bits for hexagon socket head screws [Withdrawn: replaced with ISO 2351-3]
• ISO 3110:1975 Copper alloys — Determination of aluminium as alloying element — Volumetric method [Withdrawn without replacement]
• ISO 3111:1975 Copper alloys — Determination of tin as alloying element — Volumetric method [Withdrawn without replacement]
• ISO 3112:1975 Copper and copper alloys — Determination of lead — Extracting titration method [Withdrawn without replacement]
• ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method
• ISO 3115:1981 Castings in magnesium alloys containing zirconium — Chemical composition and mechanical properties [Withdrawn: replaced with ISO 16220]
• ISO 3116:2019 Magnesium and magnesium alloys — Wrought magnesium and magnesium alloys
• ISO 3117:1977 Tangential keys and keyways [Withdrawn without replacement]
• ISO 3118:1976 Sodium perborates for industrial use — Determination of particle size distribution by mechanical sieving [Withdrawn without replacement]
• ISO 3119:1976 Boric acid, boric oxide and disodium tetraborates for industrial use — Determination of chromium content — Diphenylcarbazide photometric method [Withdrawn without replacement]
• ISO 3120:1976 diSodium tetraborates and crude sodium borates for industrial use — Determination of water content — Gravimetric method [Withdrawn without replacement]
• ISO 3121:1976 Boric acid, boric oxide and disodium tetraborates for industrial use — Determination of chloride content — Mercurimetric method [Withdrawn without replacement]
• ISO 3122:1976 Boric acid, boric oxide, disodium tetraborates, sodium perborates and crude borates for industrial use — Determination of iron content — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
• ISO 3123:1976 Sodium perborates for industrial use — Determination of rate of solution — Conductivity method [Withdrawn without replacement]
• ISO 3124:1976 Crude sodium borates for industrial use — Determination of iron soluble in alkaline medium — 2,2'- Bipyridyl photometric method [Withdrawn without replacement]
• ISO 3125:1976 Crude sodium borates for industrial use — Determination of aluminium soluble in alkaline medium — EDTA titrimetric method [Withdrawn without replacement]
• ISO 3126:2005 Plastics piping systems — Plastics components — Determination of dimensions
• ISO 3127:1994 Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method
• ISO 3129:2019 Wood — Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens
• ISO 3130:1975 Wood — Determination of moisture content for physical and mechanical tests [Withdrawn: replaced with ISO 13061-1]
• ISO 3131:1975 Wood — Determination of density for physical and mechanical tests [Withdrawn: replaced with ISO 13061-2]
• ISO 3132:1975 Wood — Testing in compression perpendicular to grain [Withdrawn: replaced with ISO 13061-5]
• ISO 3133:1975 Wood — Determination of ultimate strength in static bending [Withdrawn: replaced with ISO 13061-3]
• ISO 3134 Light metals and their alloys — Terms and definitions
  • ISO 3134-1:1985 Part 1: Materials [Withdrawn without replacement]
  • ISO 3134-2:1985 Part 2: Unwrought products [Withdrawn without replacement]
  • ISO 3134-3:1985 Part 3: Wrought products [Withdrawn without replacement]
  • ISO 3134-4:1985 Part 4: Castings [Withdrawn without replacement]
  • ISO 3134-5:1981 Part 5: Methods of processing and treatment [Withdrawn without replacement]
• ISO 3136:1983 Rubber latex — Styrene-butadiene — Determination of bound styrene content
• ISO 3137:1974 Anhydrous hydrogen fluoride for industrial use — Sampling
• ISO 3138:1974 Anhydrous hydrogen fluoride for industrial use — Determination of non-volatile acid content — Titrimetric method [Withdrawn without replacement]
• ISO 3139:1976 Aqueous hydrofluoric acid for industrial use — Sampling and methods of test
• ISO 3140:2019 Essential oil of sweet orange expressed [Citrus sinensis (L.)]
• ISO 3141:1997 Oil of clove leaves [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
• ISO 3142:1997 Oil of clove buds [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
• ISO 3143:1997 Oil of clove stems [Syzygium aromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]
• ISO 3144:1974 Carbon disulphide for industrial use — Sampling and methods of test
• ISO 3145:1974 Rolling bearings — Bearings with spherical outside surface and extended inner ring width — Eccentric locking collars [Withdrawn: replaced with ISO 9628]
• ISO 3146:2000 Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
• ISO 3147:1975 Heat exchangers — Verification of thermal balance of water-fed or steam-fed primary circuits — Principles and test requirements [Withdrawn without replacement]
• ISO 3148:1975 Radiators, convectors and similar appliances — Determination of thermal output — Test method using air-cooled closed booth [Withdrawn without replacement]
• ISO 3149:1975 Radiators, convectors and similar appliances — Determination of thermal output — Test method using liquid-cooled closed booth [Withdrawn without replacement]
• ISO 3150:1975 Radiators, convectors and similar appliances — Calculation of thermal output and presentation of results [Withdrawn without replacement]
• ISO/TR 3152:2022 Road vehicles — Comparison between ISO 26262-12 and other parts of the ISO 26262 series to support motorcycle adaptation
• ISO 3154:1988 Stranded wire ropes for mine hoisting — Technical delivery requirements
• ISO 3155:1976 Stranded wire ropes for mine hoisting — Fibre components — Characteristics and tests
• ISO 3156:1976 Stranded wire ropes for mine hoisting — Impregnating compounds, lubricants and service dressings — Characteristics and tests
• ISO 3157:1991 Radioluminescence for time measurement instruments — Specifications [Withdrawn without replacement]
• ISO 3158:1976 Timekeeping instruments — Symbolization of control positions
• ISO 3159:2009 Timekeeping instruments — Wrist-chronometers with spring balance oscillator
• ISO 3160 Watch-cases and accessories — Gold alloy coverings
  • ISO 3160-1:1998 Part 1: General requirements
  • ISO 3160-2:2015 Part 2: Determination of fineness, thickness, corrosion resistance and adhesion
  • ISO 3160-3:1993 Part 3: Abrasion resistance tests of a type of coating on standard gauges [Withdrawn: replaced with ISO 23160]
• ISO 3161:1999 Aerospace — UNJ threads — General requirements and limit dimensions
• ISO 3162:1974 Caravans and light trailers — Couplings for vacuum braking systems — Dimensional characteristics [Withdrawn without replacement]
• ISO 3163 Adventure tourism — Terminology [Under development]
• ISO 3164:2013 Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume
• ISO 3165:1976 Sampling of chemical products for industrial use — Safety in sampling
• ISO 3166 Codes for the representation of names of countries and their subdivisions
  • ISO 3166-1:2020 Part 1: Country codes
  • ISO 3166-2:2020 Part 2: Country subdivision code
  • ISO 3166-3:2020 Part 3: Code for formerly used names of countries
• ISO 3167:2014 Plastics — Multipurpose test specimens
• ISO 3168:1998 Aerospace — Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
• ISO 3169 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of impurities in aluminium oxide powders using inductively coupled plasma-optical emission spectrometry [Under development]
• ISO 3170:2004 Petroleum liquids — Manual sampling
• ISO 3171:1988 Petroleum liquids — Automatic pipeline sampling
• ISO/TR 3172:1974 Paints and varnishes — Large scale brushing test [Withdrawn without replacement]
• ISO 3173:1974 Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines operating under steady state conditions [Withdrawn: replaced with ISO 11614]
• ISO 3174:1994 Aircraft — Connections for checking hydraulic systems by ground appliances — Threaded type
• ISO 3175 Textiles — Professional care, drycleaning and wetcleaning of fabrics and garments
  • ISO 3175-1:2017 Part 1: Assessment of performance after cleaning and finishing
  • ISO 3175-2:2017 Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene
  • ISO 3175-3:2017 Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvents
  • ISO 3175-4:2018 Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning
  • ISO 3175-5:2019 Part 5: Procedure for testing performance when cleaning and finishing using dibutoxymethane
  • ISO 3175-6:2017 Part 6: Procedure for testing performance when cleaning and finishing using decamethylpentacyclosiloxane
• ISO 3177:1975 Potassium hydroxide for industrial use — Determination of chlorides content — Photometric method [Withdrawn without replacement]
• ISO 3178:1988 Steel wire ropes for general purposes — Terms of acceptance [Withdrawn without replacement]
• ISO 3179:1974 Coniferous sawn timber — Nominal dimensions [Withdrawn without replacement]
• ISO 3180 Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of hydroxyapatite powders [Under development; originally planned ISO 3180 merged into ISO 3179]
• ISO 3181 [draft merged into ISO 3179]
• ISO 3182 Light Measuring System for Smoke Emission Testing [Under development; originally planned ISO 3182 merged into ISO 3179]
• ISO 3183:2019 Petroleum and natural gas industries — Steel pipe for pipeline transportation systems
• ISO 3184:1998 Reach and straddle fork-lift trucks — Stability tests [Withdrawn: replaced with ISO 22915-3]
• ISO 3185:2021 Aerospace — Bolts, normal bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
• ISO 3186:2008 Aerospace — Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa — Dimensions
• ISO 3187:1989 Refractory products — Determination of creep in compression
• ISO 3188:1978 Starches and derived products — Determination of nitrogen content by the Kjeldahl method — Titrimetric method
• ISO 3189 Sockets for wire ropes for general purposes
  • ISO 3189-1:1985 Part 1: General characteristics and conditions of acceptance [Withdrawn without replacement]
  • ISO 3189-2:1985 Part 2: Special requirements for sockets produced by forging or machined from the solid [Withdrawn without replacement]
  • ISO 3189-3:1985 Part 3: Special requirements for sockets produced by casting [Withdrawn without replacement]
• ISO 3190:1975 Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle — Testing of the accuracy
• ISO 3191:1998 Aerospace — Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
• ISO 3193:2008 Aerospace — Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
• ISO 3194:1975 Potassium hydroxide for industrial use — Determination of sulphur compounds — Method by reduction and titrimetry [Withdrawn without replacement]
• ISO 3195:1975 Sodium hydroxide for industrial use — Sampling — Test Sample — Preparation of the main solution for carrying out certain determinations
• ISO 3196:1975 Sodium hydroxide for industrial use — Determination of carbonates content — Titrimetric method
• ISO 3197:1975 Sodium hydroxide for industrial use — Determination of chlorides content — Photometric method [Withdrawn without replacement]
• ISO 3198:1975 Sodium hydroxide for industrial use — Determination of sulphur compounds — Method by reduction and titrimetry [Withdrawn without replacement]
• ISO 3199:1975 Sodium chlorate for industrial use — Determination of chlorate content — Dichromate titrimetric method

ISO 3200 – ISO 3499[]

• ISO 3200:1975 Sodium and potassium silicates for industrial use — Determination of sulphates content — Barium sulphate gravimetric method [Withdrawn without replacement]
• ISO 3201:1975 Sodium and potassium silicates for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
• ISO 3202:1997 Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
• ISO 3203:1993 Aerospace — Bolts, normal bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions
• ISO 3205:1976 Preferred test temperatures [Withdrawn without replacement]
• ISO 3206:1975 Surface active agents — Analysis of technical alkane sulphonates — Determination of alkane monosulphonates content [Withdrawn without replacement]
• ISO 3207:1975 Statistical interpretation of data — Determination of a statistical tolerance interval [Withdrawn: replaced with ISO 16269-6]
• ISO 3208:1974 Road vehicles — Evaluation of protrusions inside passenger cars
• ISO 3209:2016 Aerospace — Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
• ISO 3210:2017 Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
• ISO 3211:2018 Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
• ISO 3212:1975 Polypropylene pipes — Burst test requirements [Withdrawn without replacement]
• ISO 3213:2009 Polypropylene (PP) pipes — Effect of time and temperature on the expected strength
• ISO 3214:2000 Oil of Litsea cubeba (Litsea cubeba Pers.)
• ISO 3215:1998 Oil of nutmeg, Indonesian type (Myristica fragrans Houtt.)
• ISO 3216:1997 Oil of cassia, Chinese type (Cinnamomum aromaticum Nees, syn. Cinnamomum cassia Nees ex Blume)
• ISO 3217:1974 Oil of lemongrass (Cymbopogon citratus)
• ISO 3218:2014 Essential oils — Principles of nomenclature
• ISO 3219 Rheology
  • ISO 3219-1:2021 Part 1: Vocabulary and symbols for rotational and oscillatory rheometry
  • ISO 3219-2:2021 Part 2: General principles of rotational and oscillatory rheometry
• ISO 3220:1975 Copper and copper alloys — Determination of arsenic — Photometric method
• ISO 3221:1998 Aerospace — Nuts, anchor, self-locking, fixed, 90 degrees corner, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
• ISO 3222:1998 Aerospace — Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
• ISO 3223:1998 Aerospace — Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
• ISO 3224:1998 Aerospace — Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
• ISO 3225:1998 Aerospace — Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions
• ISO 3228:2013 Rolling bearings — Cast and pressed housings for insert bearings — Boundary dimensions and tolerances
• ISO 3230:1998 Aerospace — Rivets, solid, 100 degrees normal countersunk head with dome, metallic material, with or without surface treatment — Dimensions
• ISO 3231:1993 Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide [Withdrawn: replaced with ISO 22479]
• ISO 3232:1974 Paints and varnishes — Determination of quantity of material in a container [Withdrawn without replacement]
• ISO 3233 Paints and varnishes — Determination of percentage volume of non-volatile matter
  • ISO 3233-1:2019 Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes' principle
  • ISO 3233-2:2019 Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes' principle
  • ISO 3233-3:2015 Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material
• ISO 3234:1975 Sodium sulphate for industrial use — Determination of loss in mass at 110 degrees C [Withdrawn without replacement]
• ISO 3235:1975 Sodium sulphate for industrial use — Determination of acid-insoluble matter [Withdrawn without replacement]
• ISO 3236:1975 Sodium sulphate for industrial use — Determination of chlorides content — Mercurimetric method [Withdrawn without replacement]
• ISO 3237:1975 Sodium sulphate for industrial use — Determination of sulphates content — Calculation method and barium sulphate gravimetric method [Withdrawn without replacement]
• ISO 3238:1975 Sodium sulphate for industrial use — Determination of calcium content — EDTA complexometric method [Withdrawn without replacement]
• ISO 3239:1975 Sodium sulphate for industrial use — Determination of iron content — 1,10- Phenanthroline photometric method [Withdrawn without replacement]
• ISO 3240:1975 Sodium sulphate for industrial use — Determination of acidity or alkalinity [Withdrawn without replacement]
• ISO 3241:1975 Sodium sulphate for industrial use — Measurement of pH — Potentiometric method [Withdrawn without replacement]
• ISO 3242 Blockchain and distributed ledger technologies – Use cases [Under development]
• ISO 3243:1975 Keyboards for countries whose languages have alphabetic extenders — Guidelines for harmonization [Withdrawn: replaced with ISO 9995-(1,7)]
• ISO 3244:1984 Office machines and data processing equipment — Principles governing the positioning of control keys on keyboards [Withdrawn: replaced with ISO 9995-(1,7)]
• ISO 3245:2015 Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values
• ISO 3246:1977 Dentistry — Working space of the dentist — Definitions and principles [Withdrawn without replacement]
• ISO 3248:2016 Paints and varnishes — Determination of the effect of heat
• ISO 3249:1975 Reciprocating internal combustion engines — Definitions of locations on an engine [Withdrawn: replaced with ISO 1204]
• ISO/TS 3250:2021 Petroleum, petrochemical and natural gas industries — Calculation and reporting production efficiency in the operating phase
• ISO 3251:2019 Paints, varnishes and plastics — Determination of non-volatile-matter content
• ISO 3252:2019 Powder metallurgy – Vocabulary
• ISO 3253:1998 Gas welding equipment — Hose connections for equipment for welding, cutting and allied processes [Withdrawn: replaced with ISO/TR 28821]
• ISO 3254:1989 Shipbuilding and marine structures — Toughened safety glass panes for rectangular windows [Withdrawn: replaced with ISO 21005]
• ISO 3255:1974 Magnesium and magnesium alloys — Determination of aluminium — Chromazurol S photometric method
• ISO 3256:1977 Aluminium and aluminium alloys — Determination of magnesium — Atomic absorption spectrophotometric method
• ISO 3257:1992 Rubber compounding ingredients — Carbon black — Method of evaluation in styrene-butadiene rubbers [Withdrawn without replacement]
• ISO 3258:1976 Air distribution and air diffusion — Vocabulary [Withdrawn without replacement]
• ISO 3260:2015 Pulps — Determination of chlorine consumption (Degree of delignification)
• ISO 3261:1975 Fire tests — Vocabulary [Withdrawn without replacement]
• ISO 3262 Extenders — Specifications and methods of test
  • ISO 3262-1:2020 Part 1: Introduction and general test methods
  • ISO 3262-2:1998 Part 2: Barytes (natural barium sulfate)
  • ISO 3262-3:1998 Part 3: Blanc fixe
  • ISO 3262-4:1998 Part 4: Whiting
  • ISO 3262-5:1998 Part 5: Natural crystalline calcium carbonate
  • ISO 3262-6:1998 Part 6: Precipitated calcium carbonate
  • ISO 3262-7:1998 Part 7: Dolomite
  • ISO 3262-8:1998 Part 8: Natural clay
  • ISO 3262-9:1997 Part 9: Calcined clay
  • ISO 3262-10:2000 Part 10: Natural talc/chlorite in lamellar form
  • ISO 3262-11:2000 Part 11: Natural talc, in lamellar form, containing carbonates
  • ISO 3262-12:2001 Part 12: Muscovite-type mica
  • ISO 3262-13:1997 Part 13: Natural quartz (ground)
  • ISO 3262-14:2000 Part 14: Cristobalite
  • ISO 3262-15:2000 Part 15: Vitreous silica
  • ISO 3262-16:2000 Part 16: Aluminium hydroxides
  • ISO 3262-17:2000 Part 17: Precipitated calcium silicate
  • ISO 3262-18:2000 Part 18: Precipitated sodium aluminium silicate
  • ISO 3262-19:2021 Part 19: Precipitated silica
  • ISO 3262-20:2021 Part 20: Fumed silica
  • ISO 3262-21:2000 Part 21: Silica sand (unground natural quartz)
  • ISO 3262-22:2000 Part 22: Flux-calcined kieselguhr
• ISO 3263:1974 Continuous mechanical handling equipment for loose bulk materials — Bucket elevators — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3264:1974 Continuous mechanical handling equipment for loose bulk materials — Screw feeders and conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3265:1974 Continuous mechanical handling equipment for loose bulk materials — Wagon tipplers handling rail-borne wagons (rotary, side discharge and end discharge) — Safety code
• ISO 3266:2010 Forged steel eyebolts grade 4 for general lifting purposes
• ISO 3267:1991 Road vehicles — Headlamp cleaners [Withdrawn without replacement]
• ISO 3268:1978 Plastics — Glass reinforced materials — Determination of tensile properties [Withdrawn: replaced with ISO 527-(4-5)]
• ISO 3269:2019 Fasteners — Acceptance inspection
• ISO 3270:1984 Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing
• ISO 3271:2015 Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices
• ISO 3272 Microfilming of technical drawings and other drawing office documents
  • ISO 3272-1:2003 Part 1: Operating procedures
  • ISO 3272-2:1994 Part 2: Quality criteria and control of 35 mm silver gelatin microfilms
  • ISO 3272-3:2001 Part 3: Aperture card for 35 mm microfilm
  • ISO 3272-4:1994 Part 4: Microfilming of drawings of special and exceptional elongated sizes
  • ISO 3272-5:1999 Part 5: Test procedures for diazo duplicating of microfilm images in aperture cards [Withdrawn without replacement]
  • ISO 3272-6:2000 Part 6: Quality criteria and control of systems for enlargements from 35 mm microfilm
• ISO 3274:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Nominal characteristics of contact (stylus) instruments
• ISO 3275:1974 Information processing – Implementation of the 7- bit coded character set and its 7- bit and 8- bit extensions on 3,81 mm magnetic cassette for data interchange
• ISO 3276:1975 Continuous mechanical handling equipment for unit loads — Belt covneyors (canvas, rubber, plastic, etc.), steel band conveyors and wire mesh belt conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3277:1974 Continuous mechanical handling equipment for unit loads — Suspended swing-tray conveyors and fixed-tray conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3278:1974 Continuous mechanical handling equipment for unit loads — Canvas-sling elevators and conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3279:1974 Continuous mechanical handling equipment for unit loads — Hydraulic conveyors — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3280:1974 Continuous mechanical handling equipment for unit loads — Gravity roller and wheel conveyors, extensible-roller or telescopic-roller conveyors, and hinged-roller conveyors (gates) — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3281:1974 Continuous mechanical handling equipment for unit loads — Spiral roller conveyor chutes, spiral chutes, and chutes for packages — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3282:1976 Aircraft — Dimensions for single-hole and triple-hole mounting (Class 3) lever-operated manual switches
• ISO 3283:1974 Continuous mechanical handling equipment — Transfer points — Safety code [Withdrawn: replaced with ISO 7149]
• ISO 3284:1974 Continuous mechanical handling equipment for loose bulk materials — Dimensions of bends for use in pneumatic handling
• ISO 3285:1986 Road vehicles — Ignition coil mounting brackets [Withdrawn without replacement]
• ISO 3286:2016 Single point cutting tools — Corner radii
• ISO 3287:1999 Powered industrial trucks – Symbols for operator controls and other displays
• ISO 3290 Rolling bearings — Balls
  • ISO 3290-1:2014 Part 1: Steel balls
  • ISO 3290-2:2014 Part 2: Ceramic balls
• ISO 3291:2016 Extra-long Morse taper shank twist drills
• ISO 3292:2016 Extra-long parallel shank twist drills
• ISO 3293:2016 Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive
• ISO 3294:2016 Parallel shank countersinks for angles 60, 90 and 120 degrees inclusive
• ISO 3295:1975 Narrow bandsaw blades for woodworking — Dimensions
• ISO 3296:1975 Textile machinery and accessories — Tubes for ring-spinning, doubling and twisting spindles, taper 1:64 [Withdrawn: replaced with ISO 368]
• ISO 3297:2020 Information and documentation – International standard serial number (ISSN)
• ISO 3298:1994 Photography — Processing chemicals — Specifications for glacial acetic acid
• ISO 3299:1994 Photography — Processing chemicals — Specifications for 1-phenyl-3-pyrazolidinone
• ISO 3300:1976 Photography — Processing chemicals — Specifications for anhydrous sodium thiosulfate [Withdrawn: replaced with ISO 10636]
• ISO 3301:1975 Statistical interpretation of data – Comparison of two means in the case of paired observations
• ISO 3302 Rubber — Tolerances for products
  • ISO 3302-1:2014 Part 1: Dimensional tolerances
  • ISO 3302-2:2008 Part 2: Geometrical tolerances
• ISO 3303 Rubber- or plastics-coated fabrics — Determination of bursting strength
  • ISO 3303-1 Part 1: Steel-ball method
  • ISO 3303-2 Part 2: Hydraulic method
• ISO 3304:1985 Plain end seamless precision steel tubes — Technical conditions for delivery [Withdrawn without replacement]
• ISO 3305:1985 Plain end welded precision steel tubes — Technical conditions for delivery
• ISO 3306:1985 Plain end as-welded and sized precision steel tubes — Technical conditions for delivery
• ISO 3307:1975 Information interchange – Representations of time of the day [Withdrawn: replaced by ISO 8601:1988]
• ISO 3308:2012 Routine analytical cigarette-smoking machine — Definitions and standard conditions
• ISO/IEC 3309:1993 Information technology — Telecommunications and information exchange between systems — High-level data link control (HDLC) procedures — Frame structure [Withdrawn: replaced by ISO/IEC 13239]
• ISO 3310 sieves — Technical requirements and testing
  • ISO 3310-1:2016 Part 1: Test sieves of metal wire cloth
  • ISO 3310-2:2013 Part 2: Test sieves of perforated metal plate
  • ISO 3310-3:1990 Part 3: Test sieves of electroformed sheets
• ISO/TR 3311:1974 Plain end precision steel tubes, welded and seamless — General tables of dimensions and masses per unit length [Withdrawn: replaced by ISO 4200]
• ISO 3312:1987 Sintered metal materials and hardmetals — Determination of Young modulus
• ISO/TR 3313:2018 Measurement of fluid flow in closed conduits — Guidelines on the effects of flow pulsations on flow-measurement instruments
• ISO 3314:1975 Shell drills with taper bore (taper bore 1 : 30 (included)) with slot drive
• ISO 3315:2018 Assembly tools for screws and nuts — Driving parts for hand-operated square drive socket wrenches — Dimensions and tests
• ISO 3316:2018 Assembly tools for screws and nuts — Attachments for hand-operated square drive socket wrenches — Dimensions and tests
• ISO 3317:2015 Assembly tools for screws and nuts — Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches
• ISO 3318:2016 Assembly tools for screws and nuts — Open-ended wrenches, box wrenches and combination wrenches — Maximum widths of heads
• ISO 3320:2013 Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series
• ISO 3321:1975 Fluid power systems and components — Cylinder bores and piston rod diameters — Inch series [Withdrawn without replacement]
• ISO 3322:1985 Fluid power systems and components — Cylinders — Nominal pressures [Withdrawn without replacement]
• ISO 3323:1987 Aircraft — Hydraulic components — Marking to indicate fluid for which component is approved
• ISO 3324 Aircraft tyres and rims
  • ISO 3324-1:2013 Part 1: Specifications [Withdrawn without replacement]
  • ISO 3324-2:2013 Part 2: Part 2: Test methods for tyres [Withdrawn without replacement]
• ISO 3325:1996 Sintered metal materials, excluding hardmetals — Determination of transverse rupture strength
• ISO 3326:2013 Hardmetals — Determination of (the magnetization) coercivity [Withdrawn without replacement]
• ISO 3327:2009 Hardmetals — Determination of transverse rupture strength
• ISO 3328:1975 Nitric acid for industrial use — Determination of sulphate content — Method by reduction and titrimetry [Withdrawn without replacement]
• ISO 3329:1975 Ammonium nitrate for industrial use — Determination of content of sulphur compounds — Method by reduction and titrimetry [Withdrawn without replacement]
• ISO 3330:1975 Ammonium nitrate for industrial use — Determination of ammoniacal nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
• ISO 3331:1975 Ammonium nitrate for industrial use — Determination of total nitrogen content — Titrimetric method after distillation [Withdrawn without replacement]
• ISO 3332:1975 Ammonium sulphate for industrial use — Determination of ammoniacal nitrogen content — Titrimetric method after distillation
• ISO 3333:1975 Ammonium sulphate for industrial use — Determination of copper content — Zinc dibenzyldithiocarbamate photometric method [Withdrawn without replacement]
• ISO 3334:2006 Micrographics — ISO resolution test chart No. 2 — Description and use
• ISO 3335:1977 Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) — Chemical composition and mechanical properties [Withdrawn: replaced with ISO 209-1]
• ISO 3336:1993 Dentistry — Synthetic polymer teeth [Withdrawn: replaced with ISO 22112]
• ISO 3337:2000 T-slot cutters with cylindrical shanks and with Morse taper shanks having tapped hole
• ISO 3338 Cylindrical shanks for milling cutters
  • ISO 3338-1:1996 Part 1: Dimensional characteristics of plain cylindrical shanks
  • ISO 3338-2:2013 Part 2: Dimensional characteristics of flatted cylindrical shanks
  • ISO 3338-3:1996 Part 3: Dimensional characteristics of threaded shanks
• ISO 3339 Tractors and machinery for agriculture and forestry — Classification and terminology
  • ISO 3339-0:1986 Part 0: Classification system and classification [Withdrawn without replacement]
• ISO 3340:1976 Fibre building boards — Determination of sand content
• ISO 3341:2000 Textile glass — Yarns — Determination of breaking force and breaking elongation
• ISO 3342:2011 Textile glass — Mats — Determination of tensile breaking force
• ISO 3343:2010 Reinforcement yarns — Determination of twist balance index
• ISO 3344:1997 Reinforcement products — Determination of moisture content
• ISO 3345:1975 Wood — Determination of ultimate tensile stress parallel to grain [Withdrawn: replaced with ISO 13061-6]
• ISO 3346:1975 Wood — Determination of ultimate tensile stress perpendicular to grain [Withdrawn: replaced with ISO 13061-7]
• ISO 3347:1976 Wood — Determination of ultimate shearing stress parallel to grain [Will be withdrawn and replaced with ISO 13061-8]
• ISO 3348:1975 Wood — Determination of impact bending strength [Withdrawn: replaced with ISO 13061-10]
• ISO 3349:1975 Wood — Determination of modulus of elasticity in static bending [Withdrawn: replaced with ISO 13061-4]
• ISO 3350:1975 Wood — Determination of static hardness [Withdrawn: replaced with ISO 13061-12]
• ISO 3351:1975 Wood — Determination of resistance to impact indentation [Withdrawn: replaced with ISO 13061-11]
• ISO/TR 3352:1974 Acoustics — Assessment of noise with respect to its effect on the intelligibility of speech [Withdrawn without replacement]
• ISO 3353 Aerospace — Lead and runout threads
  • ISO 3353-1:2020 Part 1: Rolled external threads
  • ISO 3353-2:2020 Part 2: Internal threads
• ISO 3354:2008 Measurement of clean water flow in closed conduits – Velocity-area method using current-meters in full conduits and under regular flow conditions
• ISO 3355:1975 Shoe sizes — System of length grading (for use in the Mondopoint system) [Withdrawn: replaced with ISO 9407]
• ISO 3356:2009 Milk — Determination of alkaline phosphatase
• ISO 3357:1975 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Determination of total phosphorus(V) oxide content — Quinoline phosphomolybdate gravimetric method
• ISO 3358:1979 Sodium tripolyphosphate and sodium pyrophosphate for industrial use — Separation by column chromatography and determination of the different phosphate forms [Withdrawn without replacement]
• ISO 3359:1975 Phosphoric acid for industrial use — Determination of arsenic content — Silver diethyldithiocarbamate photometric method [Withdrawn without replacement]
• ISO 3360:1976 Phosphoric acid and sodium phosphates for industrial use (including foodstuffs) — Determination of fluorine content — Alizarin complexone and lanthanum nitrate photometric method
• ISO 3361:1975 Phosphoric acid for industrial use — Determination of soluble silica content — Reduced molybdosilicate spectrophotometric method [Withdrawn without replacement]
• ISO 3362:1976 Benzyl chloride for industrial use — Methods of test [Withdrawn without replacement]
• ISO 3363:1976 Fluorochlorinated hydrocarbons for industrial use — Determination of acidity — Titrimetric method
• ISO 3364:2017 Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions
• ISO 3365:2016 Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions
• ISO 3366:1999 Coated abrasives — Abrasive rolls
• ISO 3367:1975 Coated abrasives — Rolls for widths of 50 mm and greater — Any backing — Designation and dimensions [Withdrawn: replaced with ISO 3366]
• ISO 3368:1975 Coated abrasives — Cloth rolls up to and including 40 mm width — Designation and dimensions [Withdrawn: replaced with ISO 3366]
• ISO 3369:2006 Impermeable sintered metal materials and hardmetals — Determination of density
• ISO 3371:1975 Modular units for machine tool construction — Rotary tables and multi-sided centre bases for rotary tables
• ISO 3372:1975 Shipbuilding — Inland vessels — Mushroom-type ventilator heads [Withdrawn without replacement]
• ISO 3374:2000 Reinforcement products �� Mats and fabrics — Determination of mass per unit area
• ISO 3375:2009 Textile glass — Determination of stiffness of rovings
• ISO 3376:2020 Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation
• ISO 3377 Leather — Physical and mechanical tests — Determination of tear load
• ISO 3377-1:2011 Part 1: Single edge tear
• ISO 3377-2:2016 Part 2: Double edge tear
• ISO 3378:2002 Leather — Physical and mechanical tests — Determination of resistance to grain cracking and grain crack index
• ISO 3379:2015 Leather — Determination of distension and strength of surface (Ball burst method)
• ISO 3380:2015 Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 °C
• ISO 3381:2021 Railway applications – Acoustics – Noise measurement inside railbound vehicles
• ISO 3382 Acoustics — Measurement of room acoustic parameters
  • ISO 3382-1:2009 Acoustics — Measurement of room acoustic parameters — Part 1: Performance spaces
  • ISO 3382-2:2008 Acoustics — Measurement of room acoustic parameters — Part 2: Reverberation time in ordinary rooms
  • ISO 3382-3:2022 Acoustics — Measurement of room acoustic parameters — Part 3: Open plan offices
• ISO 3383:1985 Rubber — General directions for achieving elevated or subnormal temperatures for test purposes [Withdrawn: replaced with ISO 23529]
• ISO 3384 Rubber, vulcanized or thermoplastic — Determination of stress relaxation in compression
  • ISO 3384-1:2019 Part 1: Testing at constant temperature
  • ISO 3384-2:2019 Part 2: Testing with temperature cycling
• ISO 3385:2014 Flexible cellular polymeric materials — Determination of fatigue by constant-load pounding
• ISO 3386 Polymeric materials, cellular flexible — Determination of stress-strain characteristics in compression
  • ISO 3386-1:1986 Part 1: Low-density materials
  • ISO 3386-2:1997 Part 2: High-density materials
• ISO 3387:2020 Rubber — Determination of crystallization effects by hardness measurements
• ISO 3388:1977 Patent documents — Bibliographic references — Essential and complementary elements [Withdrawn: replaced with ISO 690]
• ISO 3389:1975 Aircraft — Radio frequency flexible coaxial cables — Dimensions and electrical characteristics [Withdrawn without replacement]
• ISO 3390:1976 Aluminium oxide primarily used for the production of aluminium — Determination of manganese content — Flame atomic absorption method [Withdrawn without replacement]
• ISO 3391:1976 Cryolite, natural and artificial — Determination of calcium content — Flame atomic absorption method
• ISO 3392:1976 Cryolite, natural and artificial, and aluminium fluoride for industrial use — Determination of water content — Electrometric method [Withdrawn without replacement]
• ISO 3393:1976 Cryolite, natural and artificial, and aluminium fluoride for industrial use — Determination of moisture content — Gravimetric method
• ISO 3394:2012 Packaging – Complete, filled transport packages and unit loads – Dimensions of rigid rectangular packages
• ISO 3395:1975 Rotary drilling equipment — Roller bits and blade drag bits [Withdrawn without replacement]
• ISO 3396:1975 Rotary drilling equipment — Diamond drilling bits and diamond core bits [Withdrawn without replacement]
• ISO 3397:1977 Broadleaved wood raw parquet blocks — General characteristics
• ISO 3398:1977 Broadleaved wood raw parquet blocks — Classification of oak parquet blocks
• ISO 3399:1976 Broadleaved wood raw parquet blocks — Classification of beech parquet blocks
• ISO 3400:1997 Cigarettes — Determination of alkaloids in smoke condensates — Spectrometric method
• ISO 3401:1991 Cigarettes — Determination of alkaloid retention by the filters — Spectrometric method
• ISO 3402:1999 Tobacco and tobacco products — Atmosphere for conditioning and testing
• ISO 3405:2019 Petroleum and related products from natural or synthetic sources — Determination of distillation characteristics at atmospheric pressure
• ISO 3406:1975 Tobacco and tobacco products — Expression of analytical test results [Withdrawn without replacement]
• ISO 3407:1983 Information processing – Information interchange on 3,81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1 600 ftpi) [Withdrawn without replacement]
• ISO 3408 Ball screws
  • ISO 3408-1:2006 Part 1: Vocabulary and designation
  • ISO 3408-2:2021 Part 2: Nominal diameters, leads, nut dimensions and mounting bolts — Metric series
  • ISO 3408-3:2006 Part 3: Acceptance conditions and acceptance tests
  • ISO 3408-4:2006 Part 4: Static axial rigidity
  • ISO 3408-5:2006 Part 5: Static and dynamic axial load ratings and operational life
• ISO 3409:1975 Passenger cars — Lateral spacing of foot controls
• ISO 3410:1989 Agricultural machinery — Endless variable-speed V-belts and groove sections of corresponding pulleys
• ISO 3411:2007 Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope
• ISO 3412:1992 Road vehicles — Screened and waterproof spark-plugs and their connections — Types 1A and 1B
• ISO 3413:1975 Information processing — Recorded magnetic tapes for interchange instrumentation applications — Standard tape speeds and track configurations [Withdrawn: replaced with ISO 6068]
• ISO 3415:1986 Textile floor coverings — Determination of thickness loss after brief, moderate static loading
• ISO 3416:1986 Textile floor coverings — Determination of thickness loss after prolonged, heavy static loading
• ISO 3417:2008 Rubber — Measurement of vulcanization characteristics with the oscillating disc curemeter [Withdrawn: replaced with ISO 6502-2]
• ISO 3418:1975 Steel Tubes — Butt-welding bends, types 3D and 5D (45°, 90°, and 180°), without quality requirements [Withdrawn without replacement]
• ISO 3419:1981 Non-alloy and alloy steel butt-welding fittings
• ISO 3420:1975 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of ash — Gravimetric method [Withdrawn without replacement]
• ISO 3421 Petroleum and natural gas industries — Drilling and production equipment — Offshore conductor design, setting depth and installation [Under development]
• ISO 3422:1975 Ammonium hydrogen carbonate for industrial use (including foodstuffs) — Determination of total carbon dioxide content — Titrimetric method [Withdrawn without replacement]
• ISO 3423:1975 Sulphuric acid and oleums for industrial use — Determination of sulphur dioxide content — Iodometric method
• ISO 3424:1975 Sodium perborates for industrial use — Determination of bulk density [Withdrawn without replacement]
• ISO 3425:1975 Sulphur for industrial use — Determination of ash at 850-900 degrees C and of residue at 200 degrees C
• ISO 3426:1975 Sulphur for industrial use — Determination of loss in mass at 80 degrees C
• ISO 3427:1976 Gaseous halogenated hydrocarbons (liquefied gases) — Taking of a sample
• ISO 3428:1976 Sodium fluoride for industrial use — Preparation and storage of test samples
• ISO 3429:1976 Sodium fluoride primarily used for the production of aluminium — Determination of iron content — 1,10- Phenanthroline photometric method
• ISO 3430:1976 Sodium fluoride primarily used for the production of aluminium — Determination of silica content — Reduced molybdosilicate spectrophotometric method
• ISO 3431:1976 Sodium fluoride primarily used for the production of aluminium — Determination of soluble sulphates content — Turbidimetric method
• ISO 3432:2008 Cheese — Determination of fat content — Butyrometer for Van Gulik method
• ISO 3433:2008 Cheese — Determination of fat content — Van Gulik method
• ISO 3434:2012 Ships and marine technology — Heated glass panes for ships' rectangular windows
• ISO 3435:1977 Continuous mechanical handling equipment — Classification and symbolization of bulk materials
• ISO 3437:1975 Road vehicles — Determination of fuel leakage in the event of a collision [Withdrawn without replacement]
• ISO 3438:2013 Subland twist drills for holes prior to tapping screw threads (originally Subland twist drills with Morse taper shanks for holes prior to tapping screw threads)
• ISO 3439:2003 Subland twist drills with cylindrical shanks for holes prior to tapping screw threads [Withdrawn: replaced with ISO 3438]
• ISO 3442 Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws
• ISO 3442-1:2005 Part 1: Manually operated chucks with tongue and groove type jaws
• ISO 3442-2:2005 Part 2: Power-operated chucks with tongue and groove type jaws
• ISO 3442-3:2007 Part 3: Power-operated chucks with serrated jaws
• ISO 3443 Tolerances for building
  • ISO 3443-1:1979 Part 1: Basic principles for evaluation and specification
  • ISO 3443-2:1979 Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes
  • ISO 3443-3:1987 Part 3: Procedures for selecting target size and predicting fit
  • ISO 3443-4:1986 Part 4: Method for predicting deviations of assemblies and for allocation of tolerances
  • ISO 3443-5:1982 Part 5: Series of values to be used for specification of tolerances
  • ISO 3443-6:1986 Part 6: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control — Method 1
  • ISO 3443-7:1988 Part 7: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control — Method 2 (Statistical control method)
  • ISO 3443-8:1989 Part 8: Dimensional inspection and control of construction work
• ISO 3444 Stainless steel wire ropes [Under development]
• ISO/IEC TR 3445 Information technology - Cloud computing - Audit of cloud services [Under publication]
• ISO 3446 Timber Structures – Determination of characteristic values of sawn timber from tests on Small Clear Wood Specimens [Under development]
• ISO 3447:1975 Joints in building — General check-list of joint functions
• ISO 3448:1992 Industrial liquid lubricants — ISO viscosity classification
• ISO 3449:2005 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
• ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems
• ISO 3451 Plastics — Determination of ash
  • ISO 3451-1:2019 Part 1: General methods
  • ISO 3451-2:1998 Part 2: Poly(alkylene terephthalate) materials
  • ISO 3451-3:1984 Part 3: Unplasticized cellulose acetate
  • ISO 3451-4:1998 Part 4: Polyamides
  • ISO 3451-5:2002 Part 5: Poly(vinyl chloride)
• ISO 3452 Non-destructive testing — Penetrant testing
  • ISO 3452-1:2021 Part 1: General principles
  • ISO 3452-2:2021 Part 2: Testing of penetrant materials
  • ISO 3452-3:2013 Part 3: Reference test blocks
  • ISO 3452-4:1998 Part 4: Equipment
  • ISO 3452-5:2008 Part 5: Penetrant testing at temperatures higher than 50 degrees C
  • ISO 3452-6:2008 Part 6: Penetrant testing at temperatures lower than 10 degrees C
• ISO 3453:1984 Non-destructive testing — Liquid penetrant inspection — Means of verification [Withdrawn without replacement]
• ISO 3454:2008 Hydrometry – Direct depth sounding and suspension equipment
• ISO 3455:2021 Hydrometry – Calibration of current-meters in straight open tanks
• ISO 3456:1975 Aircraft — Lever-operated manual switches (Class 3) — Performance requirements
• ISO 3457:2003 Earth-moving machinery — Guards — Definitions and requirements
• ISO 3458:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
• ISO 3459:2015 Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
• ISO 3460:1975 Unplasticized polyvinyl chloride (PVC) pressures pipes — Metric series — Dimensions of adapter for backing flange [Withdrawn: replaced with ISO 1452-3]
• ISO 3461 General principles for the creation of graphical symbols
• ISO 3461-1:1988 Part 1: Graphical symbols for use on equipment [Withdrawn: replaced with ISO 80416-1]
• ISO 3461-2:1987 Part 2: Graphical symbols for use in technical product documentation [Withdrawn: replaced with ISO 80416-1]
• ISO 3462:1980 Tractors and machinery for agriculture and forestry — Seat reference point — Method of determination [Withdrawn without replacement]
• ISO 3463:2006 Tractors for agriculture and forestry — Roll-over protective structures (ROPS) — Dynamic test method and acceptance conditions
• ISO 3464:1977 Textile machinery and accessories — Bearings for bottom rollers and allied dimensions — Caps with central nose and caps with side lugs [Withdrawn without replacement]
• ISO 3465:1975 Hand taper pin reamers
• ISO 3466:2016 Machine taper pin reamers with parallel shanks
• ISO 3467:2016 Machine taper pin reamers with Morse taper shanks
• ISO 3468:2014 Passenger cars — Windscreen defrosting and demisting systems — Test method
• ISO 3469:1989 Passenger cars — Windscreen washing systems — Test methods
• ISO 3470:1989 Passenger cars — Windscreen demisting systems — Test method [Withdrawn: replaced with ISO 3468]
• ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
• ISO 3472:1975 Unplasticized polyvinyl chloride (PVC) pipes — Specification and determination of resistance to acetone [Withdrawn without replacement]
• ISO 3473:1977 Unplasticized polyvinyl chloride (PVC) pipes — Effect of sulphuric acid — Requirement and test method [Withdrawn without replacement]
• ISO 3474:1976 Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity [Withdrawn without replacement]
• ISO 3475:2020 Essential oil of aniseed (Pimpinella anisum L.)
• ISO 3476:1975 Modular units for machine tool construction — Tenon drive and flanges for mounting multi- spindle heads
• ISO 3477:1981 Polypropylene (PP) pipes and fittings — Density — Determination and specification [Withdrawn without replacement]
• ISO 3478:1975 Polypropylene (PP) pipes — Determination of longitudinal reversion [Withdrawn: replaced with ISO 2505-(1-2)]
• ISO 3480:1976 Polypropylene (PP) pipes — Maximum permissible longitudinal reversion [Withdrawn without replacement]
• ISO 3482 Marine technology — Technical guidelines for the active source exploration with Ocean Bottom Seismometers (OBS) [Under development]
• ISO 3483 Copper and zinc sulfide concentrates — Determination of thallium — Acid digestion and inductively coupled plasma — mass spectrometry [Under development]
• ISO/TR 3485:1980 Plastics — Polypropylene granules — Determination of thermal stability in air by pH method [Withdrawn without replacement]
• ISO 3486:1980 Wrought copper and copper alloys — Cold-rolled flat products delivered in straight lengths (sheet) — Dimensions and tolerances [Withdrawn without replacement]
• ISO 3487:1980 Wrought copper and copper alloys — Cold-rolled flat products in coils or on reels (strip) — Dimensions and tolerances [Withdrawn without replacement]
• ISO 3488:1982 Wrought copper and copper alloys — Extruded round, square or hexagonal bars — Dimensions and tolerances [Withdrawn without replacement]
• ISO 3489:1984 Wrought copper and copper alloys — Drawn round bars — All minus tolerances on diameter and form tolerances [Withdrawn without replacement]
• ISO 3490:1984 Wrought copper and copper alloys — Drawn hexagonal bars — All minus tolerances on width across flats and form tolerances [Withdrawn without replacement]
• ISO 3491:1984 Wrought copper and copper alloys — Drawn square bars — All minus tolerances on width across flats and form tolerances [Withdrawn without replacement]
• ISO 3492:1982 Wrought copper and copper alloys — Drawn round wire — Tolerances on diameter [Withdrawn without replacement]
• ISO 3493:2014 Vanilla – Vocabulary
• ISO 3494:1976 Statistical interpretation of data – Power of tests relating to means and variances
• ISO 3495:1975 Dried milk — Determination of lactic acid and lactates content [Withdrawn: replaced with ISO 8069]
• ISO 3496:1994 Meat and meat products — Determination of hydroxyproline content
• ISO 3497:2000 Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods
• ISO 3498:1979 Lubricants for machine tools — Classification [Withdrawn without replacement]
• ISO 3499:1976 Plastics — Aqueous dispersions of homopolymers and copolymers of vinyl acetate — Determination of bromine number [Withdrawn without replacement]

ISO 3500 – ISO 3999[]

• ISO 3500:2005 Gas cylinders — Seamless steel CO2 cylinders for fixed fire-fighting installations on ships
• ISO 3501:2021 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
• ISO 3503:2015 Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
• ISO 3505:1975 Ropes and cordage — Equivalence between natural fibre ropes and man-made fibre ropes for use in the mooring of vessels
• ISO 3506 Mechanical properties of corrosion-resistant stainless steel fasteners
  • ISO 3506-1:2020 Part 1: Bolts, screws and studs with specified grades and property classes
  • ISO 3506-2:2020 Part 2: Nuts with specified grades and property classes
  • ISO 3506-3:2009 Part 3: Set screws and similar fasteners not under tensile stress
  • ISO 3506-4:2009 Part 4: Tapping screws
  • ISO 3506-5 Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications [Under devlopment]
  • ISO 3506-6:2020 Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners
• ISO 3507:1999 Laboratory glassware – Pyknometers
• ISO 3508:1976 Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262
• ISO 3509:2005 Coffee and coffee products – Vocabulary
• ISO 3511 Industrial process measurement control functions and instrumentation – Symbolic representation^{[Note 3]}
  • ISO 3511-1:1977 Part 1: Basic requirements
  • ISO 3511-2:1984 Part 2: Extension of basic requirements
  • ISO 3511-3:1984 Part 3: Detailed symbols for instrument interconnection diagrams
  • ISO 3511-4:1985 Part 4: Basic symbols for process computer, interface, and shared display/control functions
• ISO 3512:1992 Heavy-duty cranked-link transmission chains
• ISO 3513:1995 Chillies — Determination of Scoville index
• ISO 3514:1976 Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density
• ISO 3515:2002 Oil of lavender (Lavandula angustifolia Mill.)
• ISO 3516:1997 Oil of coriander fruits (Coriandrum sativum L.)
• ISO 3517:2012 Essential oil of neroli (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso)
• ISO 3518:2002 Oil of sandalwood (Santalum album L.)
• ISO 3519:2005 Oil of lime distilled, Mexican type (Citrus aurantifolia (Christm.) Swingle)
• ISO 3520:1998 Oil of bergamot [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], Italian type
• ISO 3521:1997 Plastics — Unsaturated polyester and epoxy resins — Determination of overall volume shrinkage
• ISO 3522:2007 Aluminium and aluminium alloys — Castings — Chemical composition and mechanical properties
• ISO 3523:2002 Oil of cananga (Cananga odorata (Lam.) Hook. f. et Thomson, forma macrophylla)
• ISO 3524:2003 Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)
• ISO 3525:2008 Oil of amyris (Amyris balsamifera L.)
• ISO 3526:2005 Oil of sage, Spanish (Salvia lavandulifolia Vahl)
• ISO 3527:2016 Essential oil of parsley fruits (Petroselinum sativum Hoffm.)
• ISO 3528:2012 Essential oil of mandarin, Italian type (Citrus reticulata Blanco)
• ISO 3529 Vacuum technology – Vocabulary
  • ISO 3529-1:2019 Part 1: General terms
  • ISO 3529-2:2020 Part 2: Vacuum pumps and related terms
  • ISO 3529-3:2024 Part 3: Total and partial pressure vacuum gauges
• ISO 3530:1979 Vacuum technology — Mass-spectrometer-type leak-detector calibration
• ISO 3531 Financial services — Financial information eXchange session layer
  • ISO 3531-1 Part 1: FIX tagvalue encoding [Under publication]
  • ISO 3531-2 Part 2: FIX session layer [Under development]
  • ISO 3531-3 Part 3: FIX session layer test cases [Under publication]
• ISO 3532 Information technology — 3D Printing and scanning — Medical image-based modelling
  • ISO 3532-1 Part 1: General requirement [Under development]
  • ISO 3532-2 Part 2: Segmentation [Under development]
• ISO 3533:2021 Sex toys — Design and safety requirements for products in direct contact with genitalia, the anus, or both
• ISO 3534 Statistics – Vocabulary and symbols
  • ISO 3534-1:2006 Part 1: General statistical terms and terms used in probability
  • ISO 3534-2:2006 Part 2: Applied statistics
  • ISO 3534-3:2013 Part 3: Design of experiments
  • ISO 3534-4:2014 Part 4: Survey sampling
• ISO 3535:1977 Forms design sheet and layout chart [Withdrawn without replacement]
• ISO 3536:2016 Road vehicles – Safety glazing materials – Vocabulary
• ISO 3537:2015 Road vehicles – Safety glazing materials – Mechanical tests
• ISO 3538:1997 Road vehicles – Safety glazing materials – Test methods for optical properties
• ISO 3539:1975 Road vehicles — Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11
• ISO 3540:1976 Paper or plastic printing ribbons – Characteristics of cores
• ISO 3541:1985 Earth-moving machinery — Dimensions of fuel filler opening [Withdrawn without replacement]
• ISO 3542:1975 Earth-moving machinery — Lubrication intervals [Withdrawn: replaced with ISO 6750]
• ISO 3543:2000 Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method
• ISO 3544:1978 Atomizing oil burners of the monobloc type — Safety times and safety control and monitoring devices [Withdrawn without replacement]
• ISO 3545 Steel tubes and fittings — Symbols for use in specifications
  • ISO 3545-1:1989 Part 1: Tubes and tubular accessories with circular cross-section
  • ISO 3545-2:1989 Part 2: Square and rectangular hollow sections
  • ISO 3545-3:1989 Part 3: Tubular fittings with circular cross-section
• ISO 3546:1976 Fibre building boards — Determination of surface finish (roughness) [Withdrawn without replacement]
• ISO 3547 Plain bearings — Wrapped bushes
  • ISO 3547-1:2018 Part 1: Dimensions
  • ISO 3547-2:2017 Part 2: Test data for outside and inside diameters
  • ISO 3547-3:2017 Part 3: Lubrication holes, grooves and indentations
  • ISO 3547-4:2017 Part 4: Materials
  • ISO 3547-5:2020 Part 5: Checking the outside diameter
  • ISO 3547-6:2020 Part 6: Checking the inside diameter
  • ISO 3547-7:2020 Part 7: Measurement of wall thickness of thin-walled bushes
• ISO 3548 Plain bearings — Thin-walled half bearings with or without flange
  • ISO 3548-1:2014 Part 1: Tolerances, design features and methods of test
  • ISO 3548-2:2020 Part 2: Measurement of wall thickness and flange thickness
  • ISO 3548-3:2012 Part 3: Measurement of peripheral length
• ISO 3549:1995 Zinc dust pigments for paints — Specifications and test methods
• ISO 3550 Cigarettes — Determination of loss of tobacco from the ends
  • ISO 3550-1:1997 Part 1: Method using a rotating cylindrical cage
  • ISO 3550-2:1997 Part 2: Method using a rotating cubic box (sismelatophore)
• ISO 3551 Rotary core diamond drilling equipment — System A
  • ISO 3551-1:1992 Part 1: Metric units
  • ISO 3551-2:1992 Part 2: Inch units
• ISO 3552 Rotary core diamond drilling equipment — System B
  • ISO 3552-1:1992 Part 1: Metric units
  • ISO 3552-2:1992 Part 2: Inch units
• ISO 3553 Road vehicles — High-tension connections for ignition coils and distributors
  • ISO 3553-1:1987 Part 1: Socket-type
  • ISO 3553-2:1997 Part 2: Plug-types
• ISO 3554:1976 Credit cards — Magnetic stripe encoding for tracks 1 and 2 [Withdrawn: replaced with ISO 7810, ISO 7811-(1-5), and ISO/IEC 7813]
• ISO 3555:1977 Centrifugal, mixed flow and axial pumps — Code for acceptance tests — Class B [Withdrawn: replaced with ISO 9906]
• ISO 3559:1976 Road vehicles — Working voltages for lights fitted to motor vehicles and to their trailers [Withdrawn without replacement]
• ISO 3560:2013 Road vehicles — Frontal fixed barrier or pole impact test procedure
• ISO 3561:1976 Information processing – Interchangeable magnetic six-disk pack – Track format [Withdrawn without replacement]
• ISO 3562:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Physical and magnetic characteristics [Withdrawn without replacement]
• ISO 3563:1976 Information processing – Interchangeable magnetic single-disk cartridge (top loaded) – Track format [Withdrawn without replacement]
• ISO 3564:1976 Information processing – Interchangeable magnetic eleven-disk pack – Physical and magnetic characteristics [Withdrawn without replacement]
• ISO 3565:1975 Meat and meat products — Detection of salmonellae (Reference method) [Withdrawn without replacement]
• ISO 3566:1976 Sodium fluoride primarily used for the production of aluminium — Determination of chlorides content — Turbidimetric method
• ISO 3567:2011 Vacuum gauges — Calibration by direct comparison with a reference gauge
• ISO 3569:1976 Continuous mechanical handling equipment — Classification of unit loads
• ISO 3571 Passenger lift installations
  • ISO 3571-1:1977 Part 1: Residential buildings – Definitions, functional dimensions, and modular co-ordination dimensions [Withdrawn: replaced by ISO 4190-1, in 2019 replaced by ISO 8100-30]
• ISO 3572:1976 Textiles – Weaves – Definitions of general terms and basic weaves
• ISO 3573:2012 Hot-rolled carbon steel sheet of commercial and drawing qualities
• ISO 3574:2012 Cold-reduced carbon steel sheet of commercial and drawing qualities
• ISO 3575:2016 Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities
• ISO 3576:1976 Hot-rolled carbon steel sheet coils for the production of cold-reduced products [Withdrawn without replacement]
• ISO 3577:1988 Animal fats — Determination of Bömer value [Withdrawn without replacement]
• ISO 3578:1980 Steel wire ropes — Standard designations [Withdrawn without replacement]
• ISO 3579 Technical Standard for Installation of Structural Modules in Nuclear Power Plants [Under development]
• ISO 3580:2017 Welding consumables — Covered electrodes for manual metal arc welding of creep-resisting steels — Classification
• ISO 3581:2016 Welding consumables — Covered electrodes for manual metal arc welding of stainless and heat-resisting steels — Classification
• ISO 3582:2000 Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
• ISO 3583:1984 Road vehicles — Pressure test connection for compressed-air pneumatic braking equipment
• ISO 3584:2020 Road vehicles — Clevis couplings — Interchangeability
• ISO 3585:1998 Borosilicate glass 3.3 — Properties
• ISO 3586:1976 Glass plant, pipeline and fittings — General rules for testing, handling and use [Withdrawn without replacement]
• ISO 3587:1976 Glass plant, pipeline and fittings — Pipeline and fittings of nominal bore 15 to 150 mm — Compatibility and interchangeability [Withdrawn without replacement]
• ISO 3588:1977 Spices and condiments — Determination of degree of fineness of grinding — Hand sieving method (Reference method)
• ISO 3589:1975 Modular units for machine tool construction — Integral way columns
• ISO 3590:1976 Modular units for machine tool construction — Spindle units
• ISO 3591:1977 Sensory analysis – Apparatus – Wine-tasting glass
• ISO 3592:2000 Industrial automation systems — Numerical control of machines — NC processor output — File structure and language format
• ISO 3593:1981 Starch — Determination of ash
• ISO 3594:1976 Milk fat — Detection of vegetable fat by gas-liquid chromatography of sterols (Reference method) [Withdrawn without replacement]
• ISO 3595:1976 Milk fat — Detection of vegetable fat by the phytosteryl acetate test
• ISO 3596:2000 Animal and vegetable fats and oils — Determination of unsaponifiable matter — Method using diethyl ether extraction
• ISO 3597 Textile-glass-reinforced plastics — Determination of mechanical properties on rods made of roving-reinforced resin
  • ISO 3597-1:2003 Part 1: General considerations and preparation of rods
  • ISO 3597-2:2003 Part 2: Determination of flexural strength
  • ISO 3597-3:2003 Part 3: Determination of compressive strength
  • ISO 3597-4:2003 Part 4: Determination of apparent interlaminar shear strength
• ISO 3598:2011 Textile glass — Yarns — Basis for a specification
• ISO 3599:1976 Vernier callipers reading to 0,1 and 0,05 mm [Withdrawn without replacement]
• ISO 3600:2015 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Operator's manuals — Content and format
• ISO 3601 Fluid power systems – O-rings
  • ISO 3601-1:2012 Inside diameters, cross-sections, tolerances and designation codes
  • ISO 3601-2:2016 Housing dimensions for general applications
  • ISO 3601-3:2005 Quality acceptance criteria
  • ISO 3601-4:2008 Anti-extrusion rings (back-up rings)
  • ISO 3601-5:2015 Suitability of elastomeric materials for industrial applications
• ISO 3602:1989 Documentation – Romanization of Japanese (kana script)
• ISO 3603:1977 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness
• ISO 3604:1976 Fittings for unplasticized polyvinyl chloride (PVC) pressure pipes with elastic sealing ring type joints — Pressure test for leakproofness under conditions of external hydraulic pressure [Withdrawn without replacement]
• ISO 3605:1987 Textile glass — Rovings — Determination of compressive strength of rod composites [Withdrawn: replaced with ISO 3597-3]
• ISO 3606:1976 Unplasticized polyvinyl chloride (PVC) pipes — Tolerances on outside diameters and wall thicknesses [Withdrawn: replaced with ISO 11922-(1-2)]
• ISO 3607:1977 Polyethylene (PE) pipes — Tolerances on outside diameters and wall thicknesses [Withdrawn: replaced with ISO 11922-(1-2)]
• ISO 3608:1976 Chlorinated polyvinyl chloride (CPVC) pipes — Tolerances on outside diameters and wall thicknesses [Withdrawn: replaced with ISO 11922-(1-2)]
• ISO 3609:1977 Polypropylene (PP) pipes — Tolerances on outside diameters and wall thicknesses [Withdrawn: replaced with ISO 11922-(1-2)]
• ISO 3610:1976 Modular units for machine tool construction — Support brackets
• ISO 3611:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Micrometers for external measurements – Design and metrological characteristics
• ISO 3612:1977 Tobacco and tobacco products — Cigarettes — Determination of rate of free combustion [Withdrawn without replacement]
• ISO 3613:2021 Metallic and other inorganic coatings — Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys — Test methods
• ISO 3614:1975 Shipbuilding — Inland vessels — Detachable ladders [Withdrawn without replacement]
• ISO 3615:1976 Magnetic tape for instrumentation applications — Standardization of analogue modes of recording [Withdrawn: replaced with ISO 6068]
• ISO 3616:2001 Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression
• ISO 3617:1994 Photography — Processing chemicals — Specifications for sodium hydroxide
• ISO 3618:1994 Photography — Processing chemicals — Specifications for benzotriazole
• ISO 3619:1994 Photography — Processing chemicals — Specifications for ammonium thiosulfate solution
• ISO 3620:1994 Photography — Processing chemicals — Specifications for aluminium potassium sulfate
• ISO 3621:1994 Photography — Processing chemicals — Specifications for sodium tetraborate decahydrate
• ISO 3622:1996 Photography — Processing chemicals — Specifications for ammonium thiocyanate
• ISO 3623:1994 Photography — Processing chemicals — Specifications for anhydrous potassium carbonate
• ISO 3624:1994 Photography — Processing chemicals — Specifications for potassium ferricyanide
• ISO 3625:1994 Photography — Processing chemicals — Specifications for potassium hydroxide
• ISO 3626:1996 Photography — Processing chemicals — Specifications for potassium thiocyanate
• ISO 3627:2001 Photography — Processing chemicals — Specifications for anhydrous sodium metabisulfite
• ISO 3628:1994 Photography — Processing chemicals — Specifications for boric acid, granular
• ISO 3629:2000 Photography — Processing chemicals — Specifications for potassium metabisulfite
• ISO 3630 Dentistry — Endodontic instruments
  • ISO 3630-1:2019 Part 1: General requirements
  • ISO 3630-2:2013 Part 2: Enlargers
  • ISO 3630-3:2021 Part 3: Compactors
  • ISO 3630-4:2009 Part 4: Auxiliary instruments
  • ISO 3630-5:2020 Part 5: Shaping and cleaning instruments
  • ISO 3630-6 Part 6: Numeric coding system [Under development]
  • ISO 3630-7 Part 7: Ultrasonic inserts [Under development]
• ISO 3631:2019 Citrus fruits — Guidelines for storage
• ISO 3632 Spices – Saffron (Crocus sativus L.)^{[Note 3]}
  • ISO 3632-1:2011 Part 1: Specification
  • ISO 3632-2:2010 Part 2: Test methods
• ISO 3633:2002 Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Unplasticized poly(vinyl chloride) (PVC-U)
• ISO 3634:1979 Vegetable products — Determination of chloride content
• ISO 3635:1981 Size designation of clothes – Definitions and body measurement procedure [Withdrawn: replaced with ISO 8559-1]
• ISO 3636:1977 Size designation of clothes — Men's and boys' outerwear garments [Withdrawn: replaced with ISO 8559-2]
• ISO 3637:1977 Size designation of clothes — Women's and girls' outerwear garments [Withdrawn: replaced with ISO 8559-2]
• ISO 3638:1977 Size designation of clothes — Infants' garments [Withdrawn: replaced with ISO 8559-2]
• ISO 3639:1981 Cinematography — Projection reels/spools 75 to 312 mm diameter for 8 mm Type S motion-picture film — Dimensions and specifications
• ISO 3640:1982 Cinematography — Motion-picture prints and sound records for international exchange of television programmes — Specifications [Withdrawn without replacement]
• ISO 3641:1976 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Cartridge fit and take-up core drive — Dimensions and specifications
• ISO 3642:1983 Cinematography — Cemented or welded splices on 8 mm Type S motion-picture film for projector use — Dimensions
• ISO 3644:1976 Cinematography — Spindles for 8 mm Type R motion-picture cameras and projectors — Dimensions
• ISO 3645:1984 Cinematography — Image area produced by 8 mm Type S motion-picture camera aperture and maximum projectable image area — Positions and dimensions
• ISO 3646:1976 Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Slots, projections and cartridge hole for indicating film speed, colour balance and film identification — Dimensions and positions
• ISO 3647:1976 Cinematography — Spindles for 16 mm motion-picture camera spools and projector reels — Dimensions
• ISO 3648:1994 Aviation fuels — Estimation of net specific energy
• ISO 3649:1980 Cleaning equipment for air or other gases — Vocabulary [Withdrawn: replaced with ISO 29464]
• ISO 3650:1998 Geometrical Product Specifications (GPS) – Length standards – Gauge blocks
• ISO 3651 Determination of resistance to intergranular corrosion of stainless steels
  • ISO 3651-1:1998 Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
  • ISO 3651-2:1998 Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
  • ISO 3651-3:2017 Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
• ISO 3652:1975 Shipbuilding — Inland vessels — Rope reels
• ISO 3653:1978 Cinematography — Spindles for 8 mm Type S motion-picture projector reels/spools — Dimensions
• ISO 3654:1983 Cinematography — Motion-picture camera cartridge, 8-mm Type S, Model I — Cartridge-camera interface and take-up core drive — Dimensions and specifications [Withdrawn without replacement]
• ISO 3655:1986 Acceptance conditions for vertical turning and boring lathes with one or two columns and a single fixed or movable table — General introduction and testing of the accuracy
• ISO 3656:2011 Animal and vegetable fats and oils — Determination of ultraviolet absorbance expressed as specific UV extinction
• ISO 3657:2020 Animal and vegetable fats and oils — Determination of saponification value
• ISO 3659:1977 Fruits and vegetables — Ripening after cold storage
• ISO 3660:1976 Fishing nets – Mounting and joining of netting – Terms and illustrations
• ISO 3661:1977 End-suction centrifugal pumps — Baseplate and installation dimensions
• ISO 3662:1976 Hydraulic fluid power — Pumps and motors — Geometric displacements
• ISO 3663:1976 Polyethylene (PE) pressure pipes and fittings, metric series — Dimensions of flanges
• ISO 3664:2009 Graphic technology and photography — Viewing conditions
• ISO 3665:2011 Photography — Intra-oral dental radiographic film and film packets — Manufacturer specifications
• ISO/TR 3666:1998 Viscosity of water
• ISO 3668:2017 Paints and varnishes — Visual comparison of colour of paints
• ISO 3669:2020 Vacuum technology — Dimensions of knife-edge flanges
• ISO 3670:1979 Blanks for plug gauges and handles (taper lock and trilock) and ring gauges — Design and general dimensions [Withdrawn without replacement]
• ISO 3671:1976 Plastics — Aminoplastic moulding materials — Determination of volatile matter
• ISO 3672 Plastics — Unsaturated-polyester resins (UP-R)
  • ISO 3672-1:2000 Part 1: Designation system
  • ISO 3672-2:2000 Part 2: Preparation of test specimens and determination of properties
• ISO 3673 Plastics — Epoxy resins
  • ISO 3673-1:1996 Part 1: Designation
  • ISO 3673-2:2012 Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
• ISO 3674:1976 Shipbuilding — Inland vessels — Deck rail
• ISO 3675:1998 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method
• ISO 3676:2012 Packaging – Complete, filled transport packages and unit loads – Unit load dimensions
• ISO 3677:2016 Filler metal for soldering and brazing — Designation
• ISO 3678:1976 Paints and varnishes — Print-free test [Withdrawn: replaced with ISO 9117-6]
• ISO 3679:2015 Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
• ISO 3680:2004 Determination of flash/no flash — Rapid equilibrium closed cup method [Withdrawn: replaced with ISO 3679]
• ISO 3681:2018 Binders for paints and varnishes — Determination of saponification value — Titrimetric method
• ISO 3682:1996 Binders for paints and varnishes — Determination of acid value — Titrimetric method [Withdrawn: replaced with ISO 2114]
• ISO 3683:1978 Soft soldered joints — Determination of shear strength [Withdrawn: replaced with ISO 5187]
• ISO 3684:1990 Conveyor belts — Determination of minimum pulley diameters
• ISO 3685:1993 Tool-life testing with single-point turning tools
• ISO 3686: Test conditions for high accuracy turret and single spindle coordinate drilling and boring machines with table of fixed height with vertical spindle — Testing of the accuracy
  • ISO 3686-1:2000 Part 1: Single column type machines
  • ISO 3686-2:2000 Part 2: Portal type machines with moving table
• ISO 3687:1976 Paper and board — Determination of air resistance (Gurley) [Withdrawn without replacement]
• ISO 3688:1999 Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness)
• ISO 3689:1983 Paper and board — Determination of bursting strength after immersion in water
• ISO 3690:2018 Welding and allied processes — Determination of hydrogen content in arc weld metal
• ISO 3691 Industrial trucks — Safety requirements and verification
  • ISO 3691-1:2011 Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks
  • ISO 3691-2:2016 Part 2: Self-propelled variable-reach trucks
  • ISO 3691-3:2016 Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
  • ISO 3691-4:2020 Part 4: Driverless industrial trucks and their systems
  • ISO 3691-5:2014 Part 5: Pedestrian-propelled trucks
  • ISO 3691-6:2021 Part 6: Burden and personnel carriers
• ISO 3692:1976 Information processing – Reels and cores for 25,4 mm (1 in) perforated paper tape for information interchange – Dimensions [Withdrawn without replacement]
• ISO 3693:1977 Nitric acid for industrial use — Determination of chloride ions content — Potentiometric method [Withdrawn without replacement]
• ISO 3694:1977 Ammonium sulphate for industrial use — Determination of chloride ions content — Potentiometric method [Withdrawn without replacement]
• ISO 3695:1977 Ammonium nitrate for industrial use — Determination of chloride ions content — Potentiometric method [Withdrawn without replacement]
• ISO 3696:1987 Water for analytical laboratory use — Specification and test methods
• ISO 3697:1976 Sodium hydroxide for industrial use — Determination of calcium and magnesium contents — Flame atomic absorption method [Withdrawn without replacement]
• ISO 3698:1976 Potassium hydroxide for industrial use — Determination of calcium and magnesium contents — Flame atomic absorption method [Withdrawn without replacement]
• ISO 3699:1976 Anhydrous hydrogen fluoride for industrial use — Determination of water content — Karl Fischer method
• ISO 3700:1980 Anhydrous hydrogen fluoride for industrial use — Determination of water content — Conductimetric method [Withdrawn without replacement]
• ISO 3701:1976 Anhydrous hydrogen fluoride for industrial use — Determination of hexafluorosilicic acid content — Reduced molybdosilicate photometric method [Withdrawn without replacement]
• ISO 3702:1976 Anhydrous hydrogen fluoride for industrial use — Determination of sulphur dioxide content — Iodometric method [Withdrawn without replacement]
• ISO 3703:1993 Acid-grade and ceramic-grade fluorspar — Determination of flotation agents [Withdrawn without replacement]
• ISO 3704:1976 Sulphur for industrial use — Determination of acidity — Titrimetric method
• ISO 3705:1976 Sulphur for industrial use — Determination of arsenic content — Silver diethyldithiocarbamate photometric method
• ISO 3706:1976 Phosphoric acid for industrial use (including foodstuffs) — Determination of total phosphorus (V) oxide content — Quinoline phosphomolybdate gravimetric method
• ISO 3707:1976 Phosphoric acid for industrial use (including foodstuffs) — Determination of calcium content — Flame atomic absorption method
• ISO 3708:1976 Phosphoric acid for industrial use (including foodstuffs) — Determination of chloride content — Potentiometric method [Withdrawn without replacement]
• ISO 3709:1976 Phosphoric acid for industrial use (including foodstuffs) — Determination of oxides of nitrogen content — 3,4- Xylenol spectrophotometric method [Withdrawn without replacement]
• ISO 3710:1990 Lead chrome green pigments — Specifications and methods of test [Withdrawn without replacement]
• ISO 3711:1990 Lead chromate pigments and lead chromate-molybdate pigments — Specifications and methods of test
• ISO 3713:1987 Ferroalloys – Sampling and preparation of samples – General rules
• ISO 3714:1980 Oil of pennyroyal [Withdrawn without replacement]
• ISO 3715 Ships and marine technology – Propulsion plants for ships
  • ISO 3715-1:2002 Part 1: Vocabulary for geometry of propellers
  • ISO 3715-2:2001 Part 2: Vocabulary for controllable-pitch propeller plants
• ISO 3716:2021 Hydrometry – Functional requirements and characteristics of suspended-sediment samplers
• ISO/TR 3717:1975 Textile glass — Mats and woven fabrics — Determination of wet-out time through resin [Withdrawn without replacement]
• ISO/TR 3718:1975 Textile glass — Determination of wet-through time through resin [Withdrawn without replacement]
• ISO 3719:1994 Mechanical vibration — Symbols for balancing machines and associated instrumentation [Withdrawn without replacement]
• ISO 3720:2011 Black tea — Definition and basic requirements
• ISO 3721 Information technology — Computer graphics, image processing and environmental data representation — Information model for Mixed and Augmented Reality Contents [Under development; originally planned ISO 3721 was Rigid cellular practice — classification and designation]
  • ISO 3721-1 Part 1: Core Objects and Attributes [Under development]
  • ISO 3721-2 Part 2: Augmentation Style Specification [Under development]
• ISO 3722:1976 Hydraulic fluid power — Fluid sample containers �� Qualifying and controlling cleaning methods
• ISO 3723:2015 Hydraulic fluid power — Filter elements — Method for end load test
• ISO 3724:2007 Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant
• ISO 3725 Ships and marine technology — Aquatic nuisance species — Methods for evaluating the performance of compliance monitoring devices for ballast water discharges [Under development; originally planned ISO 3725 Statistics – Symbols merged into ISO 3534]
• ISO 3726:1983 Instant coffee — Determination of loss in mass at 70 degrees C under reduced pressure
• ISO 3727 Butter — Determination of moisture, non-fat solids and fat contents
  • ISO 3727-1:2001 Part 1: Determination of moisture content (Reference method)
  • ISO 3727-2:2001 Part 2: Determination of non-fat solids content (Reference method)
  • ISO 3727-3:2003 Part 3: Calculation of fat content
• ISO 3728:2004 Ice-cream and milk ice — Determination of total solids content (Reference method)
• ISO 3729:1976 Fibre building boards — Determination of surface stability [Withdrawn without replacement]
• ISO 3730:2012 Shipbuilding and marine structures — Mooring winches
• ISO 3731:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage
• ISO 3732:2003 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage
• ISO 3733:1999 Petroleum products and bituminous materials — Determination of water — Distillation method
• ISO 3734:1997 Petroleum products — Determination of water and sediment in residual fuel oils — Centrifuge method
• ISO 3735:1999 Crude petroleum and fuel oils — Determination of sediment — Extraction method
• ISO 3736 Digital fitting — Service procedure
  • ISO 3736-1 Part 1: Ready-to-wear clothing online and off-line [Under development]
  • ISO 3736-2 Part 2: Customized clothing online and off-line [Under development]
• ISO 3737:1976 Agricultural tractors and self-propelled machines — Test method for enclosure pressurization systems [Withdrawn: replaced with ISO 14269-(1-5)]
• ISO 3738 Hardmetals — Rockwell hardness test (scale A)
  • ISO 3738-1:1982 Part 1: Test method
  • ISO 3738-2:1988 Part 2: Preparation and calibration of standard test blocks
• ISO 3739 Industrial tyres and rims
  • ISO 3739-1:2007 Part 1: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims
  • ISO 3739-2:2021 Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims — Load ratings
  • ISO 3739-3:2021 Part 3: Rims
• ISO 3740:2019 Acoustics – Determination of sound power levels of noise sources – Guidelines for the use of basic standards
• ISO 3741:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms
• ISO 3742:1988 Acoustics — Determination of sound power levels of noise sources — Precision methods for discrete-frequency and narrow-band sources in reverberation rooms [Withdrawn: replaced with ISO 3741]
• ISO 3743 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields^{[Note 3]}
  • ISO 3743-1:2010 Part 1: Comparison method for a hard-walled test room
  • ISO 3743-2:2018 Part 2: Methods for special reverberation test rooms
• ISO 3744:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane
• ISO 3745:2012 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for anechoic rooms and hemi-anechoic rooms
• ISO 3746:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane
• ISO 3747:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering/survey methods for use in situ in a reverberant environment
• ISO 3749 Glass syringes — Determination of extractable tungsten [Under publication]
• ISO 3750:2006 Zinc alloys — Determination of magnesium content — Flame atomic absorption spectrometric method
• ISO 3751:1976 Zinc ingots — Selection and preparation of samples for chemical analysis [Withdrawn: replaced with ISO 20081]
• ISO 3752:1976 Zinc alloy ingots — Selection and preparation of samples for chemical analysis [Withdrawn: replaced with ISO 20081]
• ISO 3753:1977 Vacuum technology — Graphical symbols [Withdrawn without replacement]
• ISO 3754:1976 Steel — Determination of effective depth of hardening after flame or induction hardening [Withdrawn: replaced with ISO 18203]
• ISO 3755:1991 Cast carbon steels for general engineering purposes [Withdrawn: replaced with ISO 14737]
• ISO 3756:1976 Oil of cubeb
• ISO 3757:2002 Oil of patchouli (Pogostemon cablin (Blanco) Benth.)
• ISO 3758:2012 Textiles — Care labelling code using symbols
• ISO 3759:2011 Textiles — Preparation, marking and measuring of fabric specimens and garments in tests for determination of dimensional change
• ISO 3760:2002 Oil of celery seed (Apium graveolens L.)
• ISO 3761:2005 Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.)
• ISO 3762:1979 Paper — Preparation of a letterpress print for test purposes [Withdrawn without replacement]
• ISO 3763:1976 Wrought steels — Macroscopic methods for assessing the content of non-metallic inclusions
• ISO 3764:2016 Timekeeping instruments — Movements — Types, dimensions and nomenclature
• ISO 3765:1998 Timekeeping instruments — Wristwatches — Dimensions of bracelet-to-case fastening elements
• ISO 3766:2003 Construction drawings – Simplified representation of concrete reinforcement
• ISO 3767 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment – Symbols for operator controls and other displays
  • ISO 3767-1:2016 Part 1: Common symbols
  • ISO 3767-2:2016 Part 2: Symbols for agricultural tractors and machinery
  • ISO 3767-3:2016 Part 3: Symbols for powered lawn and garden equipment
  • ISO 3767-4:2016 Part 4: Symbols for forestry machinery
  • ISO 3767-5:2016 Part 5: Symbols for manual portable forestry machines
• ISO 3768:1976 Metallic coatings — Neutral salt spray test (NSS test) [Withdrawn: replaced with ISO 9227]
• ISO 3769:1976 Metallic coatings — Neutral salt spray test (NSS test) [Withdrawn: replaced with ISO 9227]
• ISO 3770:1976 Metallic coatings — Copper-accelerated acetic acid salt spray test (CASS test) [Withdrawn: replaced with ISO 9227]
• ISO 3771:2011 Petroleum products — Determination of base number — Perchloric acid potentiometric titration method
• ISO 3772:2000 Photography — Rolls of sensitized material for the pre-press industry — Dimensions and related requirements
• ISO 3773:1983 Cinematography — Tape splices for 8 mm Type S motion-picture film for projector use — Dimensions
• ISO 3774:1988 Cinematography — 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) — Cutting and perforating dimensions
• ISO 3775:1990 Cinematography — Printed 8 mm Type S image area on 16 mm motion-picture film perforated 8 mm Type S (1-3) — Position and dimensions [Withdrawn without replacement]
• ISO 3776 Tractors and machinery for agriculture — Seat belts
  • ISO 3776-1:2006 Part 1: Anchorage location requirements
  • ISO 3776-2:2013 Part 2: Anchorage strength requirements
  • ISO 3776-3:2009 Part 3: Requirements for assemblies
• ISO 3777:1976 Radiographic inspection of resistance spot welds for aluminium and its alloys — Recommended practice [Withdrawn without replacement]
• ISO/TR 3778:1987 Agricultural tractors — Maximum actuating forces required to operate controls [Withdrawn: replaced with ISO 15077]
• ISO 3779:2009 Road vehicles — Vehicle identification number (VIN) — Content and structure
• ISO 3780:2009 Road vehicles — World manufacturer identifier (WMI) code
• ISO 3781:2011 Paper and board — Determination of tensile strength after immersion in water
• ISO 3782:1980 Paper and board — Determination of resistance to picking — Accelerating speed method using the IGT tester (Pendulum or spring model) [Withdrawn without replacement]
• ISO 3783:2006 Paper and board — Determination of resistance to picking — Accelerated speed method using the IGT-type tester (electric model)
• ISO 3784:1976 Road vehicles — Measurement of impact velocity in collision tests
• ISO 3785:2006 Metallic materials — Designation of test specimen axes in relation to product texture
• ISO 3786:1975 Shipbuilding — Inland navigation towing hooks — Scale of tractive efforts
• ISO 3787:1976 Wood — Test methods — Determination of ultimate stress in compression parallel to grain [Withdrawn: replaced with ISO 13061-167]
• ISO/IEC 3788:1990 Information processing – 9-track, 12,7 mm (0,5 in) wide magnetic tape for information interchange using phase encoding at 126 ftpmm (3 200 ftpi), 63 cpmm (1 600 cpi)
• ISO 3789 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Location and method of operation of operator controls
  • ISO 3789-1:1982 Part 1: Common controls [Withdrawn: replaced with ISO 15077]
  • ISO 3789-2:1982 Part 2: Controls for agricultural tractors and machinery [Withdrawn: replaced with ISO 15077]
• ISO 3790:1976 Fishing nets — Determination of elongation of netting yarns
• ISO 3791:1976 Office machines and data processing equipment – Keyboard layouts for numeric applications
• ISO 3792:1976 Adding machines – Layout of function keyboard
• ISO 3793:1976 Essential oils — Estimation of primary and secondary free alcohols content by acetylation in pyridine [Withdrawn without replacement]
• ISO 3794:1976 Essential oils (containing tertiary alcohols) — Estimation of free alcohols content by determination of ester value after acetylation
• ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
• ISO 3796:1999 Ships and marine technology — Clear openings for external single-leaf doors
• ISO 3797:1976 Shipbuilding — Vertical steel ladders
• ISO 3798:1976 Tinplate and blackplate — Minimum packaging requirements [Withdrawn without replacement]
• ISO 3799:1976 Textile machinery and accessories — Hydraulic lubricating fittings for textile machinery [Withdrawn without replacement]
• ISO 3800:1993 Threaded fasteners — Axial load fatigue testing — Test methods and evaluation of results
• ISO 3801:1977 Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
• ISO 3802:1976 Information processing – General purpose reels with 8 mm (5/16 in) centre hole for magnetic tape for interchange instrumentation applications
• ISO 3803:1984 Road vehicles — Hydraulic pressure test connection for braking equipment
• ISO 3804:1977 Plywood — Determination of dimensions of test pieces [Withdrawn: replaced with ISO 9424]
• ISO 3805:1977 Plywood — Determination of density [Withdrawn: replaced with ISO 9427]
• ISO 3806:1977 Plywood — Determination of moisture content [Withdrawn: replaced with ISO 9425]
• ISO 3807:2013 Gas cylinders — Acetylene cylinders — Basic requirements and type testing
• ISO 3808:2002 Road vehicles — Unscreened high-voltage ignition cables — General specifications, test methods and requirements
• ISO 3809:2004 Oil of lime (cold pressed), Mexican type (Citrus aurantifolia (Christm.) Swingle), obtained by mechanical means
• ISO 3810:1987 Floor tiles of agglomerated cork — Methods of test
• ISO 3811:1979 Meat and meat products — Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli — (Reference method) [Withdrawn: replaced with ISO 4831, ISO 4832, and ISO 7251]
• ISO 3812:1976 Essential oils of geranium and rose — Determination of ester value after hot formylation
• ISO 3813:2004 Resilient floor coverings — Cork floor tiles — Specification
• ISO/TS 3814:2014 Standard tests for measuring reaction-to-fire of products and materials — Their development and application
• ISO 3815 Zinc and zinc alloys
  • ISO 3815-1:2005 Part 1: Analysis of solid samples by optical emission spectrometry
  • ISO 3815-2:2005 Part 2: Analysis by inductively coupled plasma optical emission spectrometry
• ISO 3816:1976 Zinc ingots — Selection and preparation of samples for spectrographic analysis [Withdrawn: replaced with ISO 20081]
• ISO 3817:1976 Zinc alloy ingots — Selection and preparation of samples for spectrographic analysis [Withdrawn: replaced with ISO 20081]
• ISO/TR 3818:1977 Ropes and cordage — Rope assemblies used in slinging — Safe working loads [Withdrawn without replacement]
• ISO 3819:2015 Laboratory glassware – Beakers
• ISO 3820:1978 Cinematography — Sprockets for 8 mm Type S motion-picture film — Dimensions and design
• ISO 3821:2019 Gas welding equipment — Rubber hoses for welding, cutting and allied processes
• ISO 3822 Acoustics – Laboratory tests on noise emission from appliances and equipment used in water supply installations
  • ISO 3822-1:1999 Part 1: Method of measurement
  • ISO 3822-2:1995 Part 2: Mounting and operating conditions for draw-off taps and mixing valves
  • ISO 3822-3:2018 Part 3: Mounting and operating conditions for in-line valves and appliances
  • ISO 3822-4:1997 Part 4: Mounting and operating conditions for special appliances
• ISO 3823 Dental rotary instruments — Burs
  • ISO 3823-1:1997 Part 1: Steel and carbide burs
  • ISO 3823-2:2003 Part 2: Finishing burs
• ISO 3824:1984 Dental silicophosphate cement (hand-mixed) [Withdrawn: replaced with ISO 9917]
• ISO 3825:1977 Glass transfusion bottles for medical use — Chemical resistance [Withdrawn without replacement]
• ISO 3826 Plastics collapsible containers for human blood and blood components
  • ISO 3826-1:2013 Part 1: Conventional containers
  • ISO 3826-2:2008 Part 2: Graphical symbols for use on labels and instruction leaflets
  • ISO 3826-3:2006 Part 3: Blood bag systems with integrated features
  • ISO 3826-4:2015 Part 4: Aphaeresis blood bag systems with integrated features
• ISO 3827 Shipbuilding — Co-ordination of dimensions in ships' accommodation
  • ISO 3827-1:1977 Part 1: Principles of dimensional co-ordination
  • ISO 3827-2:1977 Part 2: Glossary of terms
  • ISO 3827-3:1977 Part 3: Co-ordinating sizes for components and assemblies
  • ISO 3827-4:1977 Part 4: Controlling dimensions
  • ISO 3827-5:1979 Part 5: Co-ordinating sizes for key components
• ISO 3828:2008 Shipbuilding and marine structures – Deck machinery – Vocabulary and symbols
• ISO 3829 Petroleum products – Determination of density and relative density – Jaulmes pyknometer method [Rejected draft]
• ISO 3830:1993 Petroleum products — Determination of lead content of gasoline — Iodine monochloride method
• ISO 3831:1979 Timekeeping instruments — Classification and numbering system and nomenclature of components for watches and clocks [Withdrawn without replacement]
• ISO 3832:2002 Passenger cars — Luggage compartments — Method of measuring reference volume
• ISO 3833:1977 Road vehicles – Types – Terms and definitions
• ISO 3834 Quality requirements for fusion welding of metallic materials
  • ISO 3834-1:2021 Part 1: Criteria for the selection of the appropriate level of quality requirements
  • ISO 3834-2:2021 Part 2: Comprehensive quality requirements
  • ISO 3834-3:2021 Part 3: Standard quality requirements
  • ISO 3834-4:2021 Part 4: Elementary quality requirements
  • ISO 3834-5:2021 Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4
• ISO 3835 Equipment for vine cultivation and wine making – Vocabulary
  • ISO 3835-1:1976 (No part title)
  • ISO 3835-2:1977 (No part title) [Withdrawn without replacement]
  • ISO 3835-3:1980 (No part title)
  • ISO 3835-4:1981 (No part title)
  • ISO 3835-5:1982 (No part title) [Withdrawn without replacement]
• ISO/TR 3836:1978 Shoe sizes — System of width grading (for use in the Mondopoint system) [Withdrawn without replacement]
• ISO 3837:1993 Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method
• ISO 3838:2004 Crude petroleum and liquid or solid petroleum products — Determination of density or relative density — Capillary-stoppered pyknometer and graduated bicapillary pyknometer methods
• ISO 3839:1996 Petroleum products — Determination of bromine number of distillates and aliphatic olefins — Electrometric method
• ISO 3840:1976 Petroleum distillates — Determination of olefinic plus aromatic hydrocarbons content [Withdrawn without replacement]
• ISO 3841:1977 Petroleum waxes — Determination of melting point (cooling curve) [Withdrawn without replacement]
• ISO 3842:2006 Road vehicles — Fifth wheels — Interchangeability
• ISO 3843 Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light [Draft named ISO 2135 as it was a revision of ISO/R 2135]
• ISO 3844:1975 Shoe sizes — Method of marking [Withdrawn: replaced with ISO 9407]
• ISO 3845 Petroleum and natural gas industries — High-test steel line pipe [Rejected draft]
• ISO 3846:2008 Hydrometry – Open channel flow measurement using rectangular broad-crested weirs
• ISO 3847:1977 Liquid flow measurement in open channels by weirs and flumes – End-depth method for estimation of flow in rectangular channels with a free overfall [Withdrawn: replaced with ISO 18481]
• ISO 3848:2016 Essential oil of citronella, Java type
• ISO 3849:2003 Oil of citronella, Sri Lankan type (Cymbopogon nardus (L.) W. Watson var. lenabatu Stapf.)
• ISO 3850:2004 Resilient floor coverings - Determination of apparent density of composition cork
• ISO 3851:1977 Capsulated dental silicate and silico-phosphate filling materials [Withdrawn: replaced with ISO 9917]
• ISO 3852:2007 Iron ores for blast furnace and direct reduction feedstocks — Determination of bulk density
• ISO 3853:1994 Road vehicles — Towing vehicle coupling device to tow caravans or light trailers — Mechanical strength test
• ISO 3854:1976 Road vehicles — Caravans and light trailers — Vacuum braking — Measurement of reaction time [Withdrawn without replacement]
• ISO 3855:1977 Milling cutters – Nomenclature
• ISO 3856 Paints and varnishes — Determination of "soluble" metal content
  • ISO 3856-1:1984 Part 1: Determination of lead content — Flame atomic absorption spectrometric method and dithizone spectrophotometric method
  • ISO 3856-2:1984 Part 2: Determination of antimony content — Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method
  • ISO 3856-3:1984 Part 3: Determination of barium content — Flame atomic emission spectrometric method
  • ISO 3856-4:1984 Part 4: Determination of cadmium content — Flame atomic absorption spectrometric method and polarographic method
  • ISO 3856-5:1984 Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form — Diphenylcarbazide spectrophotometric method
  • ISO 3856-6:1984 Part 6: Determination of total chromium content of the liquid portion of the paint — Flame atomic absorption spectrometric method
  • ISO 3856-7:1984 Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints — Flameless atomic absorption spectrometric method
• ISO 3857 Compressors, pneumatic tools and machines – Vocabulary
  • ISO 3857-1:1977 Part 1: General
  • ISO 3857-2:1977 Part 2: Compressors
  • ISO 3857-3:1989 Part 3: Pneumatic tools and machines
  • ISO 3857-4:2012 Part 4: Air treatment
• ISO 3858:2018 Rubber compounding ingredients — Carbon black — Determination of light transmittance of toluene extract
• ISO 3859:2000 Inverse dovetail cutters and dovetail cutters with cylindrical shanks
• ISO 3860:2011 Bore cutters with key drive — Form milling cutters with constant profile
• ISO 3861:2005 Rubber hoses and hose assemblies for sand and grit blasting — Specification
• ISO 3862:2020 Rubber hoses and hose assemblies — Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids — Specification
• ISO 3863:1989 Cylindrical cork stoppers — Dimensional characteristics, sampling, packaging and marking [Withdrawn without replacement]
• ISO 3864 Graphical symbols – Safety colours and safety signs
• ISO 3865:2020 Rubber, vulcanized or thermoplastic — Methods of test for staining in contact with organic material
• ISO 3866:1977 Office machines and printing machines used for information processing – Widths of fabric printing ribbons on spools exceeding 19 mm
• ISO 3867:2017 Composition cork — Expansion joint fillers — Test methods
• ISO 3868:1976 Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method
• ISO 3869:2017 Agglomerated cork — Expansion joint fillers — Specifications, packaging and marking
• ISO 3870:1976 Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials — Adjustment of take-up device [Withdrawn without replacement]
• ISO 3871:2000 Road vehicles — Labelling of containers for petroleum-based or non-petroleum-based brake fluid
• ISO 3872:1976 Graphic technology — Sheet-fed printing machines — Range of sizes [Withdrawn without replacement]
• ISO 3873:1977 Industrial safety helmets
• ISO 3874:2017 Series 1 freight containers — Handling and securing
• ISO 3875:2020 Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy
• ISO 3876:1986 Shipbuilding — Inland vessels — Hand-holes
• ISO 3877 Tyres, valves and tubes – List of equivalent terms
  • ISO 3877-1:1997 Part 1: Tyres
  • ISO 3877-2:1997 Part 2: Tyre valves
  • ISO 3877-3:1978 Part 3: Tubes
  • ISO 3877-4:1984 Part 4: Solid tyres
• ISO 3878:1983 Hardmetals — Vickers hardness test [Withdrawn without replacement]
• ISO 3879:1977 Welded joints — Recommended practice for liquid penetrant testing [Withdrawn: replaced with ISO 3452]
• ISO 3880 Building construction – Stairs – Vocabulary
  • ISO 3880-1:1977 [Withdrawn without replacement]
• ISO 3881:1977 Building construction — Modular co-ordination — Stairs and stair openings — Co-ordinating dimensions
• ISO 3882:2003 Metallic and other inorganic coatings — Review of methods of measurement of thickness
• ISO 3883:1977 Office machines – Line and character capacity of address masters
• ISO/DIS 3884–1975 Plastic ???^[10]
• ISO 3886:1986 Iron ores — Determination of manganese content — Periodate spectrophotometric method [Withdrawn: replaced with ISO 9682-2]
• ISO 3887:2007 Steels — Determination of the depth of decarburization
• ISO 3888 Passenger cars — Test track for a severe lane-change manoeuvre
  • ISO 3888-1:2018 Part 1: Double lane-change
  • ISO 3888-2:2011 Part 2: Obstacle avoidance
• ISO 3889:2006 Milk and milk products — Specification of Mojonnier-type fat extraction flasks
• ISO 3890 Milk and milk products — Determination of residues of organochlorine compounds (pesticides)
  • ISO 3890-1:2009 Part 1: General considerations and extraction methods
  • ISO 3890-2:2009 Part 2: Test methods for crude extract purification and confirmation
• ISO 3891:1978 Acoustics — Procedure for describing aircraft noise heard on the ground [Withdrawn without replacement]
• ISO 3892:2000 Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods
• ISO 3893:1977 Concrete — Classification by compressive strength [Withdrawn without replacement]
• ISO 3894:2015 Road vehicles — Wheels/rims for commercial vehicles — Test methods
• ISO 3895:1986 Road vehicles — Screened and waterproof spark-plug and its connection — Type 2
• ISO 3896:1986 Road vehicles — Screened and waterproof spark-plug and its connection — Type 3
• ISO 3897:1997 Photography — Processed photographic plates — Storage practices [Withdrawn: replaced with ISO 18918]
• ISO 3898:2013 Bases for design of structures — Names and symbols of physical quantities and generic quantities
• ISO 3899:2005 Rubber — Nitrile latex — Determination of residual acrylonitrile content
• ISO 3900:1995 Rubber — Nitrile latex — Determination of bound acrylonitrile content
• ISO 3901:2019 Information and documentation – International Standard Recording Code (ISRC)
• ISO 3911:2004 Wheels and rims for pneumatic tyres – Vocabulary, designation and marking
• ISO 3918:2007 Milking machine installations – Vocabulary
• ISO 3920:1976 Honing stones of square section — Designation and dimensions [Withdrawn: replaced with ISO 603-(1-16)]
• ISO 3921:1976 Honing stones of rectangular section — Designation and dimensions [Withdrawn: replaced with ISO 603-(1-16)]
• ISO 3945:1985 Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s — Measurement and evaluation of vibration severity in situ [Withdrawn: replaced with ISO 10816-1]
• ISO 3950:2016 Dentistry – Designation system for teeth and areas of the oral cavity
• ISO 3951 Sampling procedures for inspection by variables
  • ISO 3951-1:2013 Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
  • ISO 3951-2:2013 Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics
  • ISO 3951-3:2007 Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
  • ISO 3951-4:2011 Part 4: Procedures for assessment of declared quality levels
  • ISO 3951-5:2006 Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation)
• ISO 3952 Kinematic diagrams – Graphical symbols
  • ISO 3952-1:1981 (Motion of links of mechanisms; Kinematic pairs; Links and connections of their components; Linkage of bars and their links)
  • ISO 3952-2:1981 (Friction and gear mechanisms; Cam mechanisms)
  • ISO 3952-3:1979 (Maltese and ratchet mechanisms; Couplings and brakes)
  • ISO 3952-4:1984 (Miscellaneous mechanisms and their components)
• ISO 3966:2008 Measurement of fluid flow in closed conduits – Velocity area method using Pitot static tubes
• ISO 3977 Gas turbines – Procurement

ISO 4000 – ISO 4999[]

• ISO 4006:1991 Measurement of fluid flow in closed conduits – Vocabulary and symbols
• ISO 4007:2012 Personal protective equipment – Eye and face protection – Vocabulary
• ISO/TR 4011:1976 Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines [Withdrawn: replaced with ISO 11614]
• ISO 4031:1978 Information interchange – Representation of local time differentials [Withdrawn: replaced by ISO 8601:1988]
• ISO 4037 X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy
  • ISO 4037-1:1996 Part 1: Radiation characteristics and production
  • ISO 4037-2:1997 Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV
  • ISO 4037-3:1999 Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence
  • ISO 4037-4:2004 Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields
• ISO 4046 Paper, board, pulps and related terms – Vocabulary
  • ISO 4046-1:2016 Part 1: Alphabetical index
  • ISO 4046-2:2016 Part 2: Pulping terminology
  • ISO 4046-3:2016 Part 3: Paper-making terminology
  • ISO 4046-4:2016 Part 4: Paper and board grades and converted products
  • ISO 4046-5:2016 Part 5: Properties of pulp, paper and board
• ISO 4057:1986 Information processing – Data interchange on 6,30 mm (0.25 in) magnetic tape cartridge, 63 bpmm (1 600 bpi) phase-encoded
• ISO 4063:2009 Welding and allied processes – Nomenclature of processes and reference numbers
• ISO 4071:1978 Indirect-reading capacitor-type pocket exposure meters and accessory electrometers [Withdrawn: replaced with ISO 11934, now withdrawn without replacement]
• ISO 4074 Natural latex rubber condoms – Requirements and test methods
• ISO 4087:2005 Micrographics – Microfilming of newspapers for archival purposes on 35 mm microfilm
• ISO 4104:1984 Dental zinc polycarboxylate cements [Withdrawn: replaced with ISO 9917]
• ISO 4125:1991 Dry fruits and dried fruits – Definitions and nomenclature
• ISO 4129:2012 Road vehicles – Mopeds – Symbols for controls, indicators and tell-tales
• ISO 4130:1978 Road vehicles – Three-dimensional reference system and fiducial marks – Definitions
• ISO 4135:2001 Anaesthetic and respiratory equipment – Vocabulary
• ISO 4139:1979 Ferrosilicon – Determination of aluminium content – Flame atomic absorption spectrometric method
• ISO 4140:1979 Ferrochromium and ferrosilicochromium – Determination of chromium content – Potentiometric method
• ISO 4157 Construction drawings – Designation systems
• ISO 4158:1978 Ferrosilicon, ferrosilicomanganese and ferrosilicochromium – Determination of silicon content – Gravimetric method
• ISO 4159:1978 Ferromanganese and ferrosilicomanganese – Determination of manganese content – Potentiometric method
• ISO 4165 Road vehicles — Electrical connections — Double-pole connection
• ISO 4172:1991 Technical drawings – Construction drawings – Drawings for the assembly of prefabricated structures
• ISO 4173:1980 Ferromolybdenum – Determination of molybdenum content – Gravimetric method
• Ductile iron pipes and fittings for pressure and non-pressure pipelines – Cement mortar lining
• ISO 4185:1980 Measurement of liquid flow in closed conduits – Weighing method
• ISO 4217:2015 Codes for the representation of currencies
• ISO 4223 Definitions of some terms used in the tyre industry
  • ISO 4223-1:2017 Part 1: Pneumatic tyres
  • ISO 4223-2:1991 Part 2: Solid tyres
• ISO 4225:1994 Air quality – General aspects – Vocabulary
• ISO 4226:2007 Air quality – General aspects – Units of measurement
• ISO 4232 Office machines – Minimum information to be included in specification sheets
  • ISO 4232-3:1984 Part 3: Postal franking machines
• ISO 4246:1994 Cinematography – Vocabulary
• ISO 4248:1978 Jig bushes – Definitions and nomenclature
• ISO 4287:1997 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters
• ISO 4288:1996 Geometrical Product Specifications (GPS) – Surface texture: Profile method – Rules and procedures for the assessment of surface texture
• ISO 4291:1985 Methods for the assessment of departure from roundness – Measurement of variations in radius
• ISO 4306 Cranes – Vocabulary
  • ISO 4306-1:2007 Part 1: General
  • ISO 4306-2:2012 Part 2: Mobile cranes
  • ISO 4306-3:2016 Part 3: Tower cranes
  • ISO 4306-5:2005 Part 5: Bridge and gantry cranes
• ISO 4314 Surface active agents — Determination of free alkalinity or free acidity — Titrimetric method
• ISO 4337:1977 Information processing – Interchangeable magnetic twelve-disk pack (100 Mbytes)
• ISO 4341:1978 Information processing – Magnetic tape cassette and cartridge labelling and file structure for information interchange
• ISO 4346:1977 Steel wire ropes for general purposes – Lubricants – Basic requirements
• ISO 4359:2013 Flow measurement structures – Rectangular, trapezoidal and U-shaped flumes
• ISO 4360:2008 Hydrometry – Open channel flow measurement using triangular profile weirs
• ISO 4362:1999 Hydrometric determinations – Flow measurement in open channels using structures – Trapezoidal broad-crested weirs
• ISO 4363:2002 Measurement of liquid flow in open channels – Methods for measurement of characteristics of suspended sediment
• ISO 4364:1997 Measurement of liquid flow in open channels – Bed material sampling
• ISO 4365:2005 Liquid flow in open channels – Sediment in streams and canals – Determination of concentration, particle size distribution and relative density
• ISO 4366:2007 Hydrometry – Echo sounders for water depth measurements
• ISO 4369:1979 Measurement of liquid flow in open channels – Moving-boat method
• ISO 4371:1984 Measurement of liquid flow in open channels by weirs and flumes – End depth method for estimation of flow in non-rectangular channels with a free overfall (approximate method)
• ISO 4373:2008 Hydrometry – Water level measuring devices
• ISO 4374:1990 Liquid flow measurement in open channels – Round-nose horizontal broad-crested weirs
• ISO 4375:2014 Hydrometry – Cableway systems for stream gauging
• ISO 4377:2012 Hydrometric determinations – Flow measurement in open channels using structures – Flat-V weirs
• ISO 4378 Plain bearings – Terms, definitions, classification and symbols
  • ISO 4378-1:2017 Part 1: Design, bearing materials and their properties
  • ISO 4378-2:2017 Part 2: Friction and wear
  • ISO 4378-3:2017 Part 3: Lubrication
  • ISO 4378-4:2009 Part 4: Basic symbols
  • ISO 4378-5:2009 Part 5: Application of symbols
  • ISO/TR 4378-6:2012 Part 6: Abbreviated terms
• ISO 4412 Hydraulic fluid power – Test code for determination of airborne noise levels
  • ISO 4412-1:1991 Part 1: Pumps
  • ISO 4412-2:1991 Part 2: Motors
  • ISO 4412-3:1991 Part 3: Pumps – Method using a parallelepiped microphone array
• ISO 4413:2010 Hydraulic fluid power – General rules and safety requirements for systems and their components
• ISO 4422 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply — Specifications
  • ISO 4422-1:1996 Part 1: General [Withdrawn: replaced with ISO 1452-1]
  • ISO 4422-2:1996 Part 2: Pipes (with or without integral sockets) [Withdrawn: replaced with ISO 1452-2]
  • ISO 4422-3:1996 Part 3: Fittings and joints [Withdrawn: replaced with ISO 1452-3]
  • ISO 4422-4:1996 Part 4: Valves and ancillary equipment [Withdrawn: replaced with ISO 1452-4]
  • ISO 4422-5:1996 Part 5: Fitness for purpose of the system [Withdrawn: replaced with ISO 1452-5]
• ISO 4434:1977 Unplasticized polyvinyl chloride (PVC) adaptor fittings for pipes under pressure — Laying length and size of threads — Metric series [Withdrawn: replaced with ISO 1452-3]
• ISO 4469:1981 Wood — Determination of radial and tangential shrinkage [Withdrawn: replaced with ISO 13061-13]
• ISO 4481:1977 Cutlery and flatware – Nomenclature
• ISO 4548 Methods of test for full-flow lubricating oil filters for internal combustion engines
  • ISO 4548-7:2012 Part 7: Vibration fatigue test
• ISO 4551:1987 Ferroalloys – Sampling and sieve analysis
• ISO 4552 Ferroalloys – Sampling and sample preparation for chemical analysis
  • ISO 4552-1:1987 Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese
  • ISO 4552-2:1987 Part 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium
• ISO 4578 Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method
• ISO 4582 Plastics — Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
• ISO 4587 Adhesives — Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies
• ISO 4618:2014 Paints and varnishes – Terms and definitions
• Paints and varnishes – Evaluation of degradation of coatings – Designation of quantity and size of defects, and of intensity of uniform changes in appearance
  • ISO 4628-1 General introduction and designation system
  • ISO 4628-2 Assessment of degree of blistering
  • ISO 4628-3 Assessment of degree of rusting
  • ISO 4628-4 Assessment of degree of cracking
  • ISO 4628-5 Assessment of degree of flaking
  • ISO 4628-6 Assessment of degree of chalking by tape method
  • ISO 4628-7 Assessment of degree of chalking by velvet method
  • ISO 4628-8 Assessment of degree of delamination and corrosion around a scribe
  • ISO 4628-10 Assessment of degree of filiform corrosion
• ISO 4648:1991 Rubber, vulcanized or thermoplastic — Determination of dimensions of test pieces and products for test purposes [Withdrawn: replaced with ISO 23529]
• ISO 4661 Rubber, vulcanized — Preparation of samples and test pieces
  • ISO 4661-1:1993 Rubber, vulcanized or thermoplastic — Preparation of samples and test pieces — Part 1: Physical tests [Withdrawn: replaced with ISO 23529]
  • ISO 4661-2:2018 Rubber, vulcanized — Preparation of samples and test pieces — Part 2: Chemical tests
• ISO 4683 Raw sheep skins
  • ISO 4683-1:1998 Part 1: Descriptions of defects
• ISO 4720:2009 Essential oils – Nomenclature
• ISO 4730:2017 Essential oil of Melaleuca, terpinen-4-ol type (Tea Tree oil)
• ISO 4786:1977 Enclosed-scale adjustable-range thermometers
• ISO 4787:2010 Laboratory glassware – Volumetric instruments – Methods for testing of capacity and for use
• ISO 4788:2005 Laboratory glassware – Graduated measuring cylinders
• ISO 4791 Laboratory apparatus – Vocabulary relating to apparatus made essentially from glass, porcelain or vitreous silica
  • ISO 4791-1:1985 Part 1: Names for items of apparatus
• ISO 4795:1996 Glass for thermometer bulbs
• ISO 4801:1979 Glass alcoholometers and alcohol hydrometers not incorporating a thermometer
• ISO 4805:1982 Laboratory glassware – Thermo-alcoholometers and alcohol-thermohydrometers
• ISO 4824:1993 Dentistry — Ceramic denture teeth [Withdrawn: replaced with ISO 22112]
• ISO 4831:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the detection and enumeration of coliforms – Most probable number technique
• ISO 4832:2006 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of coliforms – Colony-count technique
• ISO 4833 Microbiology of the food chain – Horizontal method for the enumeration of microorganisms
  • ISO 4833-1:2013 Part 1: Colony count at 30 degrees C by the pour plate technique
  • ISO 4833-2:2013 Part 2: Colony count at 30 degrees C by the surface plating technique
• ISO 4858:1982 Wood — Determination of volumetric shrinkage [Withdrawn: replaced with ISO 13061-14]
• ISO 4859:1982 Wood — Determination of radial and tangential swelling [Withdrawn: replaced with ISO 13061-15]
• ISO 4860:1982 Wood — Determination of volumetric swelling [Withdrawn: replaced with ISO 13061-16]
• ISO 4866:2010 Mechanical vibration and shock – Vibration of fixed structures – Guidelines for the measurement of vibrations and evaluation of their effects on structures
• ISO 4871:1996 Acoustics – Declaration and verification of noise emission values of machinery and equipment
• ISO/IEC 4873:1991 Information technology – ISO 8-bit code for information interchange – Structure and rules for implementation
• ISO 4875 Metal-cutting band saw blades
  • ISO 4875-1:2006 Part 1: Vocabulary
• ISO 4880:1997 Burning behaviour of textiles and textile products – Vocabulary
• ISO 4882:1979 Office machines and data processing equipment – Line spacings and character spacings
• ISO 4885:2017 Ferrous materials – Heat treatments – Vocabulary
• ISO 4892 Plastics – Methods of exposure to laboratory light sources
• ISO 4902:1989 Information technology – Data communication – 37-pole DTE/DCE interface connector and contact number assignments
• ISO 4903:1989 Information technology – Data communication – 15-pole DTE/DCE interface connector and contact number assignments
• ISO/IEC 4909:2006 Identification cards – Financial transaction cards – Magnetic stripe data content for track 3
• ISO 4921:2000 Knitting – Basic concepts – Vocabulary
• ISO 4977 Double cold-reduced electrolytic tinplate
  • ISO 4977-1:1984 Part 1: Sheet [Withdrawn: replaced with ISO 11949]
  • ISO 4977-2:1984 Part 2: Coil for subsequent cutting into sheets [Withdrawn: replaced with ISO 11949]

Notes[]

References[]

External links[]

• International Organization for Standardization
• ISO Certification Provider
• ISO Consultant