List of International Organization for Standardization standards, 9000-9999

From Wikipedia, the free encyclopedia

This is a list of published[Note 1] International Organization for Standardization (ISO) standards and other deliverables.[Note 2] For a complete and up-to-date list of all the ISO standards, see the ISO catalogue.[1]

The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC1) have been made freely and publicly available.[2]

ISO 9000 – ISO 9999[]

  • ISO 9000:2015 Quality management systems – Fundamentals and vocabulary
  • ISO 9001:2015 Quality management systems – Requirements
  • ISO/TS 9002:2016 Quality management systems – Guidelines for the application of ISO 9001:2015
  • ISO 9004:2018 Managing for the sustained success of an organization – A quality management approach
  • ISO/TR 9007:1987 Information processing systems - Concepts and terminology for the conceptual schema and the information base
  • ISO 9019:1995 Securities – Numbering of certificates
  • ISO 9022 Optics and optical instruments - Environmental test methods
    • ISO 9022-1:2016 Definitions, extent of testing
    • ISO 9022-2:2015 Cold, heat and humidity
    • ISO 9022-3:2015 Mechanical stress
    • ISO 9022-4:2014 Salt mist
    • ISO 9022-5:1994 Combined cold, low air pressure [Withdrawn: replaced by ISO 9022-23:2016]
    • ISO 9022-6:2015 Dust
    • ISO 9022-23:2016 Low pressure combined with cold, ambient temperature and dry or damp heat
  • ISO 9031:1987 Air cargo equipment - Handling systems for unit load devices (ULDs) - Symbols for pictorial representation
  • ISO 9036:1987 Information processing - Arabic 7-bit coded character set for information interchange
  • ISO/IEC 9040:1997 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Service
  • ISO/IEC 9041 Information technology – Open Systems Interconnection – Virtual Terminal Basic Class Protocol
    • ISO/IEC 9041-1:1997 Part 1: Specification
    • ISO/IEC 9041-2:1997 Part 2: Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9045:1990 Industrial screens and screening – Vocabulary
  • ISO 9050 Glass in building – Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet transmittance and related glazing factors
  • ISO 9060: Solar energy -- Specification and classification of instruments for measuring hemispherical solar and direct solar radiation
  • ISO/IEC 9066 Information technology – Open Systems Interconnection – Reliable Transfer[Note 3]
    • ISO/IEC 9066-1:1989 Part 1: Model and service definition
    • ISO/IEC 9066-2:1989 Part 2: Protocol specification
    • ISO/IEC 9066-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • :1988 Information processing – SGML support facilities – SGML Document Interchange Format (SDIF)
  • ISO/IEC 9070:1991 Information technology - SGML support facilities - Registration procedures for public text owner identifiers
  • ISO/IEC 9072 Information technology – Open Systems Interconnection – Remote Operations[Note 3]
    • ISO/IEC 9072-1:1989 Part 1: Model, notation and service definition
    • ISO/IEC 9072-2:1989 Part 2: Protocol specification
    • ISO/IEC 9072-3:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 9075 Information technology – Database languages – SQL
  • ISO 9086 Wood – Methods of physical and mechanical testing – Vocabulary
    • ISO 9086-1:1987 Part 1: General concepts and macrostructure
  • ISO 9092:2011 Textiles – Nonwovens – Definition
  • ISO 9095:1990 Steel tubes – Continuous character marking and colour coding for material identification
  • ISO 9123:2001 Measurement of liquid flow in open channels – Stage-fall-discharge relationships
  • ISO/IEC 9126 Software engineering – Product quality
  • ISO 9128:2006 Road vehicles - Graphical symbols to designate brake fluid types
  • ISO 9141 Road vehicles – Diagnostic systems[Note 3]
    • ISO 9141-2 CARB requirements for interchange of digital information
    • ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool
  • ISO 9144:1991 Securities – Optical character recognition line – Position and structure
  • ISO 9160:1988 Information processing - Data encipherment - Physical layer interoperability requirements
  • ISO 9170 Terminal units for medical gas pipeline systems
    • ISO 9170-1:2017 Part 1: Terminal units for use with compressed medical gases and vacuum
    • ISO 9170-2:2008 Part 2: Terminal units for anaesthetic gas scavenging systems
  • ISO/IEC 9171 Information technology - 130 mm optical disk cartridge, write once, for information interchange
    • ISO/IEC 9171-1:1990 Part 1: Unrecorded optical disk cartridge
    • ISO/IEC 9171-2:1990 Part 2: Recording format
  • ISO 9175 Tubular tips for hand-held technical pens using India ink on tracing paper
    • ISO 9175-1:1988 Part 1: Definitions, dimensions, designation and marking
  • ISO 9177 Mechanical pencils for technical drawings[Note 3]
    • ISO 9177-1:2016 Part 1: Classification, dimensions, performance requirements and testing
    • ISO 9177-2:1989 Part 2: Black leads – Classification and dimensions
    • ISO 9177-3:1994 Part 3: Black leads – Bending strengths of HB leads
  • ISO 9180:1988 Black leads for wood-cased pencils – Classification and diameters
  • ISO 9186 Graphical symbols - Test methods
    • ISO 9186-1:2014 Part 1: Method for testing comprehensibility
    • ISO 9186-2:2008 Part 2: Method for testing perceptual quality
    • ISO 9186-3:2014 Part 3: Method for testing symbol referent association
  • ISO 9187 Injection equipment for medical use
    • ISO 9187-1:2010 Part 1: Ampoules for injectables
    • ISO 9187-2:2010 Part 2: One-point-cut (OPC) ampoules
  • ISO 9195:1992 Liquid flow measurement in open channels – Sampling and analysis of gravel-bed material
  • ISO 9196:1992 Liquid flow measurement in open channels – Flow measurements under ice conditions
  • ISO 9211 Optics and photonics - Optical coatings
    • ISO 9211-1:2010 Part 1: Definitions
  • ISO/TR 9212:2015 Hydrometry – Methods of measurement of bedload discharge
  • ISO 9222 Technical drawings – Seals for dynamic application
    • ISO 9222-1:1989 Part 1: General simplified representation
    • ISO 9222-2:1989 Part 2: Detailed simplified representation
  • ISO 9223 Corrosion of metals and alloys - Corrosivity of atmospheres - Classification, determination and estimation
  • ISO 9224 Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories
  • ISO 9225 Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres
  • ISO 9226 Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity
  • ISO 9227:2017 Corrosion tests in artificial atmospheres – Salt spray tests
  • ISO 9229:2007 Thermal insulation - Vocabulary
  • ISO 9230:2007 Information and documentation - Determination of price indexes for print and electronic media purchased by libraries
  • ISO 9232:2003 Yogurt – Identification of characteristic microorganisms (Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus)
  • ISO 9235:2013 Aromatic natural raw materials – Vocabulary
  • ISO 9241 Ergonomics of human-system interaction
  • ISO 9244:2008 Earth-moving machinery - Machine safety labels - General principles
  • ISO 9245:1991 Earth-moving machinery – Machine productivity – Vocabulary, symbols and units
  • ISO 9247:1990 Earth-moving machinery – Electrical wires and cables – Principles of identification and marking
  • ISO/TS 9250 Earth-moving machinery – Multilingual listing of equivalent terms
    • ISO/TS 9250-1:2012 Part 1: General
    • ISO/TS 9250-2:2012 Part 2: Performance and dimensions
  • ISO 9251:1987 Thermal insulation - Heat transfer conditions and properties of materials - Vocabulary
  • ISO 9264:1988 Woodworking machines – Narrow belt sanding machines with sliding table or frame – Nomenclature
  • ISO 9265:1988 Woodworking machines – Multi-spindle boring machines – Nomenclature
  • ISO 9266:1988 Woodworking machines – Universal tool and cutter sharpeners – Nomenclature
  • ISO 9267:1988 Woodworking machines – Bandsaw blade sharpening machines – Nomenclature
  • ISO 9268:1988 Implants for surgery – Metal bone screws with conical under-surface of head – Dimensions
  • ISO 9269:1988 Implants for surgery – Metal bone plates – Holes and slots corresponding to screws with conical under-surface
  • ISO/IEC 9281 Information technology - Picture coding methods
    • ISO/IEC 9281-1:1990 Part 1: Identification
    • ISO/IEC 9281-2:1990 Part 2: Procedure for registration
  • ISO/IEC 9282 Information processing - Coded representation of pictures
    • ISO/IEC 9282-1:1988 Part 1: Encoding principles for picture representation in a 7-bit or 8-bit environment
  • ISO 9288:1989 Thermal insulation – Heat transfer by radiation – Physical quantities and definitions
  • ISO/IEC 9293:1994 Information technology – Volume and file structure of disk cartridges for information interchange
  • ISO 9295:2015 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment
  • ISO 9296:2017 Acoustics - Declared noise emission values of information technology and telecommunications equipment
  • ISO 9300:2005 Measurement of gas flow by means of critical flow Venturi nozzles
  • ISO 9308 Water quality – Enumeration of Escherichia coli and coliform bacteria[Note 3]
    • ISO 9308-1:2014 Part 1: Membrane filtration method for waters with low bacterial background flora
    • ISO 9308-2:2012 Part 2: Most probable number method
    • ISO 9308-3:1998 Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water
  • ISO 9314 Information processing systems Fibre Distributed Data Interface (FDDI)
    • ISO 9314-1:1989 Part 1: Token Ring Physical Layer Protocol (PHY)
    • ISO 9314-2:1989 Part 2: Token Ring Media Access Control (MAC)
    • ISO/IEC 9314-3:1990 Part 3: Physical Layer Medium Dependent (PMD)
    • ISO/IEC 9314-4:1999 Part 4: Single Mode Fibre Physical Layer Medium Dependent (SMF-PMD)
    • ISO/IEC 9314-5:1995 Part 5: Hybrid Ring Control (HRC)
    • ISO/IEC 9314-6:1998 Part 6: Station Management (SMT)
    • ISO/IEC 9314-7:1998 Part 7: Physical layer Protocol (PHY-2)
    • ISO/IEC 9314-8:1998 Part 8: Media Access Control-2 (MAC-2)
    • ISO/IEC 9314-9:2000 Part 9: Low-cost fibre physical layer medium dependent (LCF-PMD)
    • ISO/IEC 9314-13:1998 Part 13: Conformance Test Protocol Implementation Conformance Statement (CT-PICS) Proforma
    • ISO/IEC 9314-20:2001 Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (FDDI PMD ATS)
    • ISO/IEC 9314-21:2000 Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (FDDI PHY ATS)
    • ISO/IEC 9314-25:1998 Part 25: Abstract test suite for FDDI - Station Management Conformance Testing (SMT-ATS)
    • ISO/IEC 9314-26:2001 Part 26: Media Access Control Conformance Testing (MAC-ATS)
  • ISO 9315:1989 Information processing systems - Interface between flexible disk cartridge drives and their host controllers
  • ISO/IEC 9316:1995 Information technology - Small Computer System Interface-2
    • ISO/IEC 9316-2:2000 Information technology - Small computer system interface-2 (SCSI-2) - Part 2: Common Access Method (CAM) Transport and SCSI interface module
  • ISO/IEC 9318 Information technology - Intelligent Peripheral Interface
    • ISO/IEC 9318-2:1990 Part 2: Device specific command set for magnetic disk drives
    • ISO/IEC 9318-3:1990 Part 3: Device generic command set for magnetic and optical disk drives
    • ISO/IEC 9318-4:2002 Part 4: Device generic command set for magnetic tape drives (IPI-3 tape)
  • ISO 9334:2012 Optics and photonics - Optical transfer function - Definitions and mathematical relationships
  • ISO 9335:2012 Optics and photonics - Optical transfer function - Principles and procedures of measurement
  • ISO 9342 Optics and optical instruments – Test lenses for calibration of focimeters
    • ISO 9342-1:2005 Part 1: Test lenses for focimeters used for measuring spectacle lenses
    • ISO 9342-2:2005 Part 2: Test lenses for focimeters used for measuring contact lenses
  • ISO 9346:2007 Hygrothermal performance of buildings and building materials – Physical quantities for mass transfer – Vocabulary
  • ISO 9360 Anaesthetic and respiratory equipment – Heat and moisture exchangers (HMEs) for humidifying respired gases in humans
    • ISO 9360-1:2000 Part 1: HMEs for use with minimum tidal volumes of 250 ml
    • ISO 9360-2:2001 Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
  • ISO 9362:2014 Banking – Banking telecommunication messages – Business identifier code (BIC)
  • ISO 9368 Measurement of liquid flow in closed conduits by the weighing method – Procedures for checking installations
    • ISO 9368-1:1990 Part 1: Static weighing systems
  • ISO 9394:2012 Ophthalmic optics – Contact lenses and contact lens care products – Determination of biocompatibility by ocular study with rabbit eyes
  • ISO 9407 Shoe sizes – Mondopoint system of sizing and marking
  • ISO 9431:1990 Construction drawings – Spaces for drawing and for text, and title blocks on drawing sheets
  • ISO/TR 9464:2008 Guidelines for the use of ISO 5167:2003
  • ISO 9488:1999 Solar energy - Vocabulary
  • ISO 9493:2010 Geometrical product specifications (GPS) – Dimensional measuring equipment: Dial test indicators (lever type) – Design and metrological characteristics
  • ISO/IEC 9496:2003 CHILL - The ITU-T programming language
  • ISO 9506 Industrial automation systems - Manufacturing Message Specification
  • ISO/IEC 9529 Information processing systems - Data interchange on 90 mm (3,5 in) flexible disk cartridges using modified frequency modulation recording at 15 916 ftprad, on 80 tracks on each side
  • Information technology – Font information interchange
    • ISO/IEC 9541-1:2012 Part 1: Architecture
    • ISO/IEC 9541-2:2012 Part 2: Interchange Format
    • ISO/IEC 9541-3:2012 Part 3: Glyph shape representation
    • ISO/IEC 9541-4:2009 Part 4: Harmonization to Open Font Format
  • ISO 9542:1988 Information processing systems – Telecommunications and information exchange between systems – End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473)
  • ISO 9543:1989 Information processing systems – Information exchange between systems – Synchronous transmission signal quality at DTE/DCE interfaces
  • ISO/IEC 9545:1994 Information technology – Open Systems Interconnection – Application Layer structure
  • ISO/TR 9547:1988 Programming language processors - Test methods - Guidelines for their development and acceptability
  • ISO/IEC 9548 Information technology – Open Systems Interconnection – Connectionless Session protocol
    • ISO/IEC 9548-1:1996 Protocol specification
    • ISO/IEC 9548-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC 9549:1990 Information technology – Galvanic isolation of balanced interchange circuit
  • ISO 9555 Measurement of liquid flow in open channels – Tracer dilution methods for the measurement of steady flow
    • ISO 9555-1:1994 Part 1: General
    • ISO 9555-3:1992 Part 3: Chemical tracers
    • ISO 9555-4:1992 Part 4: Fluorescent tracers
  • ISO 9564 Financial services – Personal Identification Number (PIN) management and security
  • ISO 9568:1993 Cinematography – Background acoustic noise levels in theatres, review rooms and dubbing rooms
  • ISO/IEC TR 9573:1988 Information processing - SGML support facilities - Techniques for using SGML
    • ISO/IEC TR 9573-11:2004 Part 11: Structure descriptions and style specifications for standards document interchange
    • ISO/IEC TR 9573-13:1991 Part 13: Public entity sets for mathematics and science
  • ISO/IEC 9574:1992 Information technology – Provision of the OSI connection-mode network service by packet mode terminal equipment to an integrated services digital network (ISDN)
  • ISO/IEC TR 9575:1995 Information technology – Telecommunications and information exchange between systems – OSI Routeing Framework
  • ISO/IEC 9576 Information technology – Open Systems Interconnection – Connectionless Presentation protocol
    • ISO/IEC 9576-1:1995 Protocol specification
    • ISO/IEC 9576-2:1995 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/IEC TR 9577:1999 Information technology – Protocol identification in the network layer
  • ISO/IEC TR 9578:1990 Information technology – Communication interface connectors used in local area networks
  • :2000 Information technology – Remote database access for SQL with security enhancement
  • ISO 9583:1993 Implants for surgery – Non-destructive testing – Liquid penetrant inspection of metallic surgical implants
  • ISO 9584:1993 Implants for surgery – Non-destructive testing – Radiographic examination of cast metallic surgical implants
  • ISO 9585:1990 Implants for surgery – Determination of bending strength and stiffness of bone plates
  • ISO/IEC 9592 Information technology – Computer graphics and image processing – Programmer's Hierarchical Interactive Graphics System (PHIGS)
  • ISO/IEC 9593 Information technology – Computer graphics – Programmer's Hierarchical Interactive Graphics System (PHIGS) language bindings[Note 3]
  • ISO/IEC 9594 Information technology – Open Systems Interconnection – The Directory
    • ISO/IEC 9594-1:2017 Part 1: Overview of concepts, models and services
    • ISO/IEC 9594-2:2017 Part 2: Models
    • ISO/IEC 9594-3:2017 Part 3: Abstract service definition
    • ISO/IEC 9594-4:2017 Part 4: Procedures for distributed operation
    • ISO/IEC 9594-5:2017 Part 5: Protocol specifications
    • ISO/IEC 9594-6:2017 Part 6: Selected attribute types
    • ISO/IEC 9594-7:2017 Part 7: Selected object classes
    • ISO/IEC 9594-8:2017 Part 8: Public-key and attribute certificate frameworks
    • ISO/IEC 9594-9:2017 Part 9: Replication
  • ISO/IEC 9595:1998 Information technology – Open Systems Interconnection – Common management information service
  • ISO/IEC 9596 Information technology – Open Systems Interconnection – Common management information protocol
    • ISO/IEC 9596-1:1998 Part 1: Specification
    • ISO/IEC 9596-2:1993 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO 9611:1996 Acoustics – Characterization of sources of structure-borne sound with respect to sound radiation from connected structures – Measurement of velocity at the contact points of machinery when resiliently mounted
  • ISO 9613 Acoustics – Attenuation of sound during propagation outdoors
    • ISO 9613-1:1993 Part 1: Calculation of the absorption of sound by the atmosphere
    • ISO 9613-2:1996 Part 2: General method of calculation
  • ISO 9614 Acoustics – Determination of sound power levels of noise sources using sound intensity
    • ISO 9614-1:1993 Part 1: Measurement at discrete points
    • ISO 9614-2:1996 Part 2: Measurement by scanning
    • ISO 9614-3:2002 Part 3: Precision method for measurement by scanning
  • ISO 9626:2016 Stainless steel needle tubing for the manufacture of medical devices – Requirements and test methods
  • Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Functional specification
    • ISO/IEC 9636-1:1991 Part 1: Overview, profiles, and conformance
    • ISO/IEC 9636-2:1991 Part 2: Control
    • ISO/IEC 9636-3:1991 Part 3: Output
    • ISO/IEC 9636-4:1991 Part 4: Segments
    • ISO/IEC 9636-5:1991 Part 5: Input and echoing
    • ISO/IEC 9636-6:1991 Part 6: Raster
  • ISO/IEC 9637 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) – Data stream binding
    • ISO/IEC 9637-1:1994 Part 1: Character encoding
    • ISO/IEC 9637-2:1992 Part 2: Binary encoding
  • ISO/IEC 9638 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) - Language bindings
    • ISO/IEC 9638-3:1994 Part 3: Ada
  • ISO 9645:1990 Acoustics – Measurement of noise emitted by two-wheeled mopeds in motion – Engineering method
  • ISO/IEC 9646 Information technology—Open Systems Interconnection—Conformance testing methodology and framework
    • ISO/IEC 9646-1:1994 Part 1: General concepts
    • ISO/IEC 9646-2:1994 Part 2: Abstract Test Suite specification
    • ISO/IEC 9646-3:1998 Part 3: The Tree and Tabular Combined Notation (TTCN)
    • ISO/IEC 9646-4:1994 Part 4: Test realization
    • ISO/IEC 9646-5:1994 Part 5: Requirements on test laboratories and clients for the conformance assessment process
    • ISO/IEC 9646-6:1994 Part 6: Protocol profile test specification
    • ISO/IEC 9646-7:1995 Part 7: Implementation Conformance Statements
  • ISO 9660:1988 Information processing – Volume and file structure of CD-ROM for information interchange
  • ISO/IEC 9661:1994 Information technology – Data interchange on 12,7 mm wide magnetic tape cartridges – 18 tracks, 1 491 data bytes per millimetre
  • ISO 9662:1994 Aircraft equipment - Environmental and operating conditions for airborne equipment - Humidity, temperature and pressure tests
  • ISO 9668:1990 Pulps — Determination of magnesium content — Flame atomic absorption spectrometric method [Withdrawn: replaced with ISO 12830]
  • ISO 9687:2015 Dentistry - Graphical symbols for dental equipment
  • ISO 9688:1990 Mechanical vibration and shock – Analytical methods of assessing shock resistance of mechanical systems – Information exchange between suppliers and users of analyses
  • ISO 9696:2007 Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
  • ISO 9706:1994 Information and documentation – Paper for documents – Requirements for permanence
  • ISO 9707:2008 Information and documentation - Statistics on the production and distribution of books, newspapers, periodicals and electronic publications
  • ISO 9712:2012 Non-destructive testing - Qualification and certification of NDT personnel
  • ISO 9713:2002 Neurosurgical implants – Self-closing intracranial aneurysm clips
  • ISO 9714 Orthopaedic drilling instruments
    • ISO 9714-1:2012 Part 1: Drill bits, taps and countersink cutters
  • ISO 9735:1988 Electronic data interchange for administration, commerce and transport (EDIFACT) – Application level syntax rules (Syntax version number: 4, Syntax release number: 2)[Note 3]
    • ISO 9735-1:2002 Part 1: Syntax rules common to all parts
    • ISO 9735-2:2002 Part 2: Syntax rules specific to batch EDI
    • ISO 9735-3:2002 Part 3: Syntax rules specific to interactive EDI
    • ISO 9735-4:2002 Part 4: Syntax and service report message for batch EDI (message type – CONTRL)
    • ISO 9735-5:2002 Part 5: Security rules for batch EDI (authenticity, integrity and non-repudiation of origin)
    • ISO 9735-6:2002 Part 6: Secure authentication and acknowledgement message (message type – AUTACK)
    • ISO 9735-7:2002 Part 7: Security rules for batch EDI (confidentiality)
    • ISO 9735-8:2002 Part 8: Associated data in EDI
    • ISO 9735-9:2002 Part 9: Security key and certificate management message (message type – KEYMAN)
    • ISO 9735-10:2014 Part 10: Syntax service directories
  • Information technology – Security techniques – Digital signature schemes giving message recovery
    • ISO/IEC 9796-2:2010 Part 2: Integer factorization based mechanisms
    • ISO/IEC 9796-3:2006 Part 3: Discrete logarithm based mechanisms
  • ISO/IEC 9797 Information technology – Security techniques – Message Authentication Codes (MACs)
    • ISO/IEC 9797-1:2011 Part 1: Mechanisms using a block cipher
    • :2011 Part 2: Mechanisms using a dedicated hash-function
    • ISO/IEC 9797-3:2011 Part 3: Mechanisms using a universal hash-function
  • Information technology – Security techniques – Entity authentication
    • ISO/IEC 9798-1:2010 Part 1: General
    • ISO/IEC 9798-2:2008 Part 2: Mechanisms using symmetric encipherment algorithms
    • ISO/IEC 9798-3:1998 Part 3: Mechanisms using digital signature
    • ISO/IEC 9798-4:1999 Part 4: Mechanisms using a cryptographic check function
    • ISO/IEC 9798-5:2009 Part 5: Mechanisms using zero-knowledge techniques
    • ISO/IEC 9798-6:2010 Part 6: Mechanisms using manual data transfer
  • ISO 9801:2009 Ophthalmic instruments – Trial case lenses
  • ISO 9802:1996 Raw optical glass – Vocabulary
  • ISO/IEC 9804:1998 Information technology – Open Systems Interconnection – Service definition for the Commitment, Concurrency and Recovery service element
  • ISO/IEC 9805 Information technology – Open Systems Interconnection – Protocol for the Commitment, Concurrency and Recovery service element
    • ISO/IEC 9805-1:1998 Protocol specification
    • ISO/IEC 9805-2:1996 Protocol Implementation Conformance Statement (PICS) proforma
  • ISO/TR 9824:2007 Hydrometry – Measurement of free surface flow in closed conduits
  • ISO 9825:2005 Hydrometry – Field measurement of discharge in large rivers and rivers in flood
  • ISO 9826:1992 Measurement of liquid flow in open channels – Parshall and SANIIRI flumes
  • ISO 9827:1994 Measurement of liquid flow in open channels by weirs and flumes – Streamlined triangular profile weirs
  • Information technology – Open Systems Interconnection – Procedures for the operation of OSI Registration Authorities
    • ISO/IEC 9834-1:2012 General procedures and top arcs of the international object identifier tree
    • ISO/IEC 9834-2:1993 Part 2: Registration procedures for OSI document types
    • ISO/IEC 9834-3:2008 Registration of Object Identifier arcs beneath the top-level arc jointly administered by ISO and ITU-T
    • ISO/IEC 9834-4:1991 Part 4: Register of VTE Profiles
    • ISO/IEC 9834-5:1991 Part 5: Register of VT Control Object Definitions
    • ISO/IEC 9834-6:2005 Registration of application processes and application entities
    • ISO/IEC 9834-7:2008 Joint ISO and ITU-T Registration of International Organizations
    • ISO/IEC 9834-8:2014 Part 8: Generation of universally unique identifiers (UUIDs) and their use in object identifiers
    • ISO/IEC 9834-9:2008 Registration of object identifier arcs for applications and services using tag-based identification
  • ISO 9846 Solar energy -- Calibration of a pyranometer using a pyrheliometer
  • ISO 9847 Solar energy -- Calibration of field pyranometers by comparison to a reference pyranometer
  • ISO 9849:2017 Optics and optical instruments - Geodetic and surveying instruments - Vocabulary
  • ISO 9851:1990 Continuous mechanical handling equipment – Overhead electrical monorail conveyors – Definitions and safety rules
  • ISO 9869 Thermal insulation – Building elements – In-situ measurements of thermal resistance and thermal transmittance
  • ISO 9873:2017 Dentistry - Intra-oral mirrors
  • ISO 9878:1990 Micrographics - Graphical symbols for use in microfilming
  • ISO 9897:1997 Freight containers - Container equipment data exchange (CEDEX) - General communication codes
  • ISO/IEC 9899:2018 Programming languages – C
  • ISO 9902 Textile machinery – Noise test code
    • ISO 9902-1:2001 Part 1: Common requirements
    • ISO 9902-2:2001 Part 2: Spinning preparatory and spinning machinery
    • ISO 9902-3:2001 Part 3: Nonwoven machinery
    • ISO 9902-4:2001 Part 4: Yarn processing, cordage and rope manufacturing machinery
    • ISO 9902-5:2001 Part 5: Weaving and knitting preparatory machinery
    • ISO 9902-6:2001 Part 6: Fabric manufacturing machinery
    • ISO 9902-7:2001 Part 7: Dyeing and finishing machinery
  • ISO 9926 Cranes – Training of operators[Note 3]
    • ISO 9926-1:1990 Part 1: General
    • ISO 9926-3:2016 Part 3: Tower cranes
  • ISO/IEC/IEEE 9945:2009 Information technology – Portable Operating System Interface (POSIX®) Base Specifications, Issue 7
  • ISO 9947:2005 Textile machinery and accessories – Two-for-one twisters – Vocabulary
  • ISO 9949 Urine absorbing aids - Vocabulary
    • ISO 9949-1:1993 Part 1: Conditions of urinary incontinence
    • ISO 9949-2:1993 Part 2: Products
    • ISO 9949-3:1993 Part 3: Identification of product types
  • ISO 9951:1993 Measurement of gas flow in closed conduits – Turbine meters
  • ISO 9957 Fluid draughting media
    • ISO 9957-1:1992 Part 1: Water-based India ink – Requirements and test conditions
    • ISO 9957-2:1995 Part 2: Water-based non-India ink – Requirements and test conditions
    • ISO 9957-3:1997 Part 3: Water-based coloured draughting inks – Requirements and test conditions
  • ISO 9958 Draughting media for technical drawings – Draughting film with polyester base
    • ISO 9958-1:1992 Part 1: Requirements and marking
    • ISO 9958-2:1992 Part 2: Determination of properties
  • ISO 9959 Numerically controlled draughting machines – Drawing test for the evaluation of performance
    • ISO 9959-1:1992 Part 1: Vector plotters
  • ISO 9960 Draughting instruments with or without graduation
    • ISO 9960-1:1992 Part 1: Draughting scale rules
  • ISO 9961:1992 Draughting media for technical drawings – Natural tracing paper
  • ISO 9962 Manually operated draughting machines
    • ISO 9962-1:1992 Part 1: Definitions, classification and designation
    • ISO 9962-2:1992 Part 2: Characteristics, performance, inspection and marking
  • ISO/IEC 9973:2013 Information technology - Computer graphics, image processing and environmental data representation - Procedures for registration of items
  • ISO 9984:1996 Information and documentation – Transliteration of Georgian characters into Latin characters
  • ISO 9985:1996 Information and documentation – Transliteration of Armenian characters into Latin characters
  • Financial transaction cards – Messages between the integrated circuit card and the card accepting device
  • ISO/IEC 9995 Information technology – Keyboard layouts for text and office systems
  • ISO 9997:1999 Dental cartridge syringes
  • Assistive products for persons with disability – Classification and terminology


Notes[]

  1. ^ This list generally excludes draft versions.
  2. ^ ISO deliverables include "specifications" (ISO/PAS, ISO/TS), "reports" (ISO/TR), etc, which are not referred to by ISO as "standards".
  3. ^ a b c d e f g h The exact wording of this title varies between parts. This is the wording of the most recently published part.

References[]

  1. ^ "Standards catalogue". ISO.
  2. ^ "Freely Available Standards". ISO.

External links[]

Retrieved from ""