M20 recoilless rifle

M20 recoilless rifle
M20 recoilless rifle
	An M20 recoilless rifle in action during the Korean War
Type	Recoilless anti-tank weapon
Place of origin	United States
Service history
Used by	United States
Wars	World War II; Korean War; First Indochina War; Algerian War; Lebanese Civil War; Vietnam War; Salvadoran Civil War; Western Sahara War;
Production history
Designed	1944
Produced	1945
Variants	Type 56
Specifications
Mass	103 lb (47 kg)
Length	82 in (2.1 m)
Barrel length	65 in (1.7 m)
Crew	1 or 2
Shell	75 x 408 mm R HE, HEAT, Smoke
Shell weight	20.5–22.6 lb (9.3–10.3 kg)
Caliber	75 mm (3.0 in)
Recoil	Recoilless
Carriage	M1917A1 tripod
Elevation	−27° to +65°
Traverse	360°
Muzzle velocity	1,000 ft/s (300 m/s)
Maximum firing range	3.9 mi (6.3 km)

An M20 recoilless rifle on display in the Royal Armouries at Fort Nelson.

Sergeant Reckless, a decorated war horse serving with a US Marine Corps recoilless rifle platoon in the Korean War, stands beside a 75mm recoilless rifle

The M20 recoilless rifle is a U.S. 75 mm caliber recoilless rifle T21E12 that was used during the last months of the Second World War and extensively during the Korean War. It could be fired from an M1917A1 .30 caliber machine gun tripod, or from a vehicle mount, typically a Jeep. Its shaped charge warhead, also known as HEAT, was capable of penetrating 100 mm of armor. Although the weapon proved ineffective against the T-34 tank during the Korean War and most other tanks, it was used primarily as a close infantry support weapon to engage all types of targets including infantry and lightly armored vehicles. The M20 proved useful against pillboxes and other types of field fortifications. Its poor armor penetration by the HEAT round was because of it being a spin-stabilized projectile rather than the later fin-stabilized rounds used in the 106mm M40 recoilless rifle.^{[citation needed]}

History[]

During World War II, the U.S. military recognized that, due to advancements in armor technology by enemy forces, a powerful lightweight weapon was needed to defend infantry and light armor units. The Ordnance Department Small Arms Division commenced development of a recoilless rifle and, by 1944, models of a 75 mm recoilless rifle were being tested. Production of the M20 was underway by March 1945; only limited numbers were used by Allied troops in the European and Pacific theaters.

The M20 relied on a perforated artillery shell casing, combined with a rear vented breech using propellant gases from the firing of a shell, to greatly reduce the recoil of the weapon. It is this use of vented propellant gases that eliminated the need for a recoil system, thereby reducing the weight of the launcher and enhancing its use as a light infantry weapon.

Recoilless rifles, such as the M20, were used successfully in large numbers by US forces during the Korean War; and by both sides in the First Indochina War (1946–54). They were phased out after being replaced by wire guided missiles, which were introduced during the Vietnam War in the 1960s and 1970s. Until stockpiles of ammunition were exhausted in the 1990s, M20 recoilless rifles were used to start controlled avalanches by the U.S. National Forest Service and National Park Service.^[4]

The Royal Moroccan Army used M20s during the Western Sahara War against the Polisario Front.^[5]

China also produced unlicensed copies, known as the Type 52 and Type 56 (an upgraded version that could fire fin-stabilized HEAT shells). These versions were widely used by the North Vietnamese Army (NVA) and Vietcong guerrillas in the Vietnam War^[6] and there are also pictures suggesting its use by guerrillas and militias in the Lebanese Civil War (1975–1990), such as the Amal Movement militia.^[7]