Matthew E. Welsh Bridge

This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help by introducing citations to additional sources. Find sources:  –  ·  ·  · scholar · JSTOR (March 2015)

Matthew E. Welsh Bridge
Coordinates	38°01′01.52″N 86°11′49.69″W / 38.0170889°N 86.1971361°W / 38.0170889; -86.1971361Coordinates: 38°01′01.52″N 86°11′49.69″W / 38.0170889°N 86.1971361°W / 38.0170889; -86.1971361
Carries	2 lanes of KY 313 and SR 135
Crosses	Ohio River
Locale	Brandenburg, Kentucky and Mauckport, Indiana
Maintained by	INDOT
Characteristics
Design	Cantilever bridge
Total length	3,098 ft (944 m)
Longest span	221 m
History
Construction start	August 1964
Opened	November 19, 1966
Location

Matthew E. Welsh Bridge is a two-lane, single-pier cantilever bridge^[1] on the Ohio River. The bridge connects Kentucky Route 313 and Indiana State Road 135, as well as the communities of Brandenburg, Kentucky and Mauckport, Indiana.

It is 3,098 ft (944 m) long and was built at a cost of 5.5 million dollars, financed mainly by the State of Indiana. The truss portion of the bridge is continuous across two 725 ft (221 m) spans. Construction of the bridge began in August 1964 and the bridge was opened to traffic on November 19, 1966.

The bridge was named after Matthew E. Welsh, the 41st governor of Indiana.

Although 90% of the bridge is within the Commonwealth of Kentucky, it is owned and maintained by the State of Indiana.

• 

  The Matthew E. Welsh Bridge, as seen from the landing in Brandenburg, Kentucky

• 

  Distance view of bridge from Indiana side

• 

  Different view of underside of bridge

• 

  View of the bridge from Brandenburg on a clear day

Footnotes[]

Wikimedia Commons has media related to Matthew E. Welsh Bridge.

See also[]

• List of crossings of the Ohio River

Further reading[]

• Matthew E. Walsh Bridge at Bridges & Tunnels