Minié ball

From Wikipedia, the free encyclopedia
Various types of Minié balls. The four on the right are provided with Tamisier ball grooves for aerodynamic stability.
James H. Burton's 1855 Minié ball design (.58 caliber, 500 grains) from the Harpers Ferry Armory

The Minié ball or Minie ball, is a type of hollow-based bullet designed by Claude-Étienne Minié, inventor of the French Minié rifle, for muzzleloaded rifled muskets. It came to prominence in the Crimean War[1] and the American Civil War, where it was found to inflict significantly more serious wounds than earlier round musket balls. Both the American Springfield Model 1861 and the British Pattern 1853 Enfield rifled muskets, the most common weapons used during the American Civil War, used the Minié ball.[2]

Rifling, the addition of spiral groovings inside a gun barrel, imparts a stabilizing spin to a projectile for better external ballistics, greatly increasing the effective range and accuracy of the gun. Prior to the Minié ball, balls had to be rammed down the barrel, sometimes with a mallet, because gunpowder residue would foul a rifled bore after a relatively small number of shots, requiring frequent cleaning of the gun.[3] The development of the Minié ball was significant because it was the first projectile type that could be made small enough to easily slide down the barrel of a rifled long gun, yet still maintain good accuracy during firing due to obturation.

Designs[]

The Minié ball is a cylindro-conoidal bullet with grease-filled cannelures on its exterior and a conical concavity in its base. Minié designed the bullet with a small iron plug and lead skirting, with the intent that the skirt of the bullet would expand under the pressure of gunpowder deflagration, causing the bullet to obturate and grip the rifling of the bore. This also maximized muzzle velocity by creating a good bullet to bore seal with minimal pressure loss.[citation needed]

The precursor to the Minié ball was created in the 1830s by the French Army captains Montgomery and Henri-Gustave Delvigne. Their design was made to allow rapid muzzle loading of rifles, an innovation that brought about the widespread use of the rifle rather than the smoothbore musket as a mass battlefield weapon. Delvigne had invented a ball that could expand upon ramming to fit the grooves of a rifle in 1826.[4] The cylindro-conoidal ball design had been proposed in 1832 by Captain John Norton,[5] but had not been adopted.[citation needed]

Captain James H. Burton, an armorer at the Harpers Ferry Armory, developed an improvement on Minié's design when he added a deep cavity at the base of the ball, which filled up with gas and expanded the bullet's skirt upon firing. The result was not only better range, but also a cheaper bullet, which was used in the Crimean War[citation needed] and then the American Civil War.[3] Burton's version of the ball weighed 1.14 ounces.[6]

Use[]

The Minié ball could be quickly removed from the paper cartridge, with the gunpowder poured down the barrel and the bullet pressed past the muzzle rifling and any detritus from prior shots. It was then rammed down the barrel with the ramrod, which ensured that the charge was packed and the hollow base was filled with powder. When the rifle was fired, the expanding gas pushed forcibly on the base of the bullet, deforming the skirt to engage the rifling. This provided spin for accuracy, a better seal for consistent velocity and longer range, and easier cleaning of barrel detritus.[citation needed]

Effects[]

Gunshot Fracture of the Left Femur by Minié ball, 1863

Wounds inflicted by the conical Minié ball were different from those caused by the round balls from smoothbore muskets, since the conical ball had a higher muzzle velocity and greater mass, and easily penetrated the human body.[6] Round balls tended to remain lodged in the flesh, and they were often observed to take a winding path through the body. Flexed muscles and tendons, as well as bone, could cause the round ball to deviate from a straight path. The Minié ball tended to cut a straight path and usually went all the way through the injured part; the ball seldom remained lodged in the body. If a Minié ball struck a bone, it usually caused the bone to shatter.[7] The damage to bones and resulting compound fractures were usually severe enough to necessitate amputation.[7][8] A hit on a major blood vessel could also have serious and often lethal consequences.[6]

Private Milton E. Wallen of Company C, 1st Kentucky Cavalry, wounded by a Minié ball while in prison at Richmond, July 4, 1863 being treated for gangrene

One of the more infamous documented cases involving Minié ball injuries concerned a Confederate soldier wounded during Jubal Early's raid on Washington, D.C. on July 12, 1864. The soldier, a private in the , was hit in the side of the head by a .58 caliber Minié ball, which shattered his skull and lodged in the right hemisphere of the brain. He went into convulsions and became paralyzed on one side of his body, but started recovering within eight days of being hospitalized. However, within three more days, his condition deteriorated and he eventually lost consciousness and died, having survived with his wound for 16 days. An autopsy of the soldier found that the right hemisphere of the brain was extensively damaged and large areas of it had necrosed. The brain was removed, preserved in formaldehyde and donated to the Army Museum in Washington. The primary cause of death had been infection caused by both the initial injury and subsequent necrosis of brain tissue.[9]

See also[]

References[]

Notes[]

  1. ^ Institute, Author Civil War (2019-04-30). "Small but Deadly: The Minié Ball". The Gettysburg Compiler. Retrieved 2019-12-10.
  2. ^ Keegan, John (2009) The American Civil War: A Military History New York; Knopf. p.55 ISBN 978-0-307-26343-8
  3. ^ Jump up to: a b McPherson, James M. (1988) Battle Cry of Freedon: The Civil War Era Oxford University Press. p.474 ISBN 0-19-503863-0
  4. ^ Fadala, Sam (2006). The Complete Black Powder Handbook: The Latest Guns and Gear (5th ed.). Gun Digest Books. p. 144. ISBN 9780896893900. Retrieved 2010-05-14.
  5. ^ O'Connelll, Robert L. (1990). Of Arms and Men: A History of War, Weapons, and Aggression. Oxford University Press US. p. 191. ISBN 9780198022046. Retrieved 2010-05-14.
  6. ^ Jump up to: a b c Keegan, John (2009) The American Civil War: A Military History New York; Knopf. pp.314-15 ISBN 978-0-307-26343-8
  7. ^ Jump up to: a b Manring, M. M.; Hawk, Alan; Calhoun, Jason H.; Andersen, Romney C. (14 February 2009). "Treatment of War Wounds: A Historical Review". Clinical Orthopaedics and Related Research. 467 (8): 2168–2191. doi:10.1007/s11999-009-0738-5. PMC 2706344. PMID 19219516.
  8. ^ Chisolm, Julian (1864). A manual of military surgery, for the use of surgeons in the Confederate States army; with explanatory plates of all useful operations. Columbia: Evans and Cogswell. p. 119.
  9. ^ "Medical and Surgical Reporter", 1865 Vol XIII

Bibliography[]

  • Brent Nosworthy (2003). The Bloody Crucible of Courage, Fighting Methods and Combat Experience of the Civil War. Carroll and Graf Publishers. ISBN 0-7867-1147-7.
  • "The lead minie ball". CivilWar@Smithsonian.

External links[]

Retrieved from ""