Norton Mercury

From Wikipedia, the free encyclopedia

Norton Mercury
Mike Crick, Best Norton. 1969 Norton Mercury (cropped).jpg
1969 Norton Mercury
ManufacturerNorton-Villiers
Production1968-1970
AssemblyPlumstead, London
PredecessorNorton 650SS
Engine646 cc (39.4 cu in) air-cooled OHV vertical twin
Bore / stroke68 mm × 89 mm (2.7 in × 3.5 in)
Compression ratio9:1
Top speed110 mph (180 km/h) (est)
Power47 bhp (35 kW) @ 6,800 rpm
TransmissionWet clutch, 4-speed, chain drive
Frame typeFeatherbed duplex cradle
SuspensionFront: telescopic forks
Rear: swinging arm
BrakesFront: 8 in (200 mm) drum, Rear: 7 in (180 mm) drum
Tyres3.00x19 front, 3.25x19 rear (UK)
3.50x19 front, 4.00x18 rear (US)
Wheelbase55.5 in (1,410 mm)
Seat height31 in (790 mm)
Weight408 lb (185 kg) (dry)
Fuel capacity3.5 US gal (13 l; 2.9 imp gal)
Footnotes / references
[1][2][3]

The Norton Manxman was a 646 cc (39.4 cu in) air-cooled OHV parallel twin motorcycle made by Norton-Villiers from 1968 to 1970.[2] It was the last Norton model to use the featherbed frame. Following the collapse of AMC and the subsequent formation of Norton Villiers, the company's focus had been on the new Norton Commando. There was a large inventory of parts from previous models that would not be used on the Commando, and to use up this stock the Mercury was conceived. The Mercury was introduced in October 1968 and around 750 machines were produced,[4] most of the production going to the US.[5] The model was also used by the Nigerian Police.[6]

Technical details[]

Engine and transmission[]

The engine in the Mercury was based on that of the 650SS,[2][7] which itself was a development of Bert Hopwood's 1948 500 cc twin first used on the Model 7 Dominator. The pre-unit air-cooled OHV vertical twin engine used an alloy head that was fed by a single Amal Concentric carburettor. A number of internal improvements introduced for the Commando engine were used in the Mercury's engine.[3]

Primary drive was by chain to a multiplate wet clutch and was enclosed in a pressed steel chaincase. The gearbox had 4 speeds.[1]

The machine used 12 volt electrics and was charged by a crankshaft mounted alternator. Ignition was by coil and points.[2]

Cycle parts[]

The cycle parts of the Mercury were based on the slimline featherbed frame and Roadholder forks.[3] Unique for this model was a humped dualseat.[7] Brakes were 8 in (200 mm) drum front and 7 in (180 mm) rear.[3]

Most of the production was finished with Atlantic blue oil tank, mudguards and chaincases with a silver petrol tank. It was also available in black with a silver or red tank.[3]

References[]

  1. ^ a b Reynolds 1990, p. 99.
  2. ^ a b c d "1970 Norton Mercury". Classic-British-Motorcycles.com. Retrieved 4 July 2021.
  3. ^ a b c d e "Mercury Rising: Norton's Forgotten Featherbed". Motorcycle Classics. Retrieved 4 July 2021.
  4. ^ "1 of 750 – 1970 Norton Mercury". Bike-urious. 28 October 2015. Retrieved 4 July 2021.
  5. ^ "Norton Mercury". Real Classic. 4 April 2020. Retrieved 4 July 2021 – via PressReader.com.
  6. ^ "Mercury". andover-norton.co.uk. Retrieved 4 July 2021.
  7. ^ a b "1970 Norton 650cc Mercury Frame no. 129398 Engine no. 129398". Bonhams. Retrieved 4 July 2021.

Bibliography[]

External links[]

Retrieved from ""