Pint

Pint
A full pint glass. The fill line indicates a half pint.
General information
Unit of	volume
Symbol	pt or p
Conversions (imperial)
1 imp pt in ...	... is equal to ...
SI derived unit	568.26125 ml
Conversions (US)
1 US pt in ...	... is equal to ...
SI derived unit	473.176473 ml (liquid)
SI derived unit	550.610471 ml (dry)

The pint (/ˈpaɪnt/, listen (help·info); symbol pt,^[1][2] sometimes abbreviated as p^[3]) is a unit of volume or capacity in both the imperial and United States customary measurement systems. In both of those systems it is traditionally one eighth of a gallon. The British imperial pint is about 20% larger than the American pint because the two systems are defined differently. Almost all other countries have standardized on the metric system, so the size of what may be called a pint varies depending on local custom.

Pints are commonly used for the sale of milk in the United Kingdom. The label gives both the metric and the imperial volume.

The imperial pint (≈ 568 ml) is used in the United Kingdom and Ireland and to a limited extent in Commonwealth nations. In the United States, two kinds of pint are used: a liquid pint (≈ 473 ml) and a less-common dry pint (≈ 551 ml). Each of these pints is one eighth of its respective gallon, but the gallons differ. This difference dates back to 1824, when the British Weights and Measures Act standardized various liquid measures throughout the British Empire, while the United States continued to use the earlier English measure. The imperial pint consists of 20 imperial fluid ounces and the US liquid pint is 16 US fluid ounces. The imperial fluid ounce is about 4% smaller than the US fluid ounce. All of the other former British colonies, such as Canada, Australia, South Africa and New Zealand, converted to the metric system in the 1960s and 1970s; so, while the term pint may still be in common use in these countries, it may no longer refer to the British imperial pint once used throughout the British Empire.

In the United Kingdom, the imperial pint is the mandatory base unit for draught beer and cider.^[4] Milk sold in returnable containers (such as glass bottles) may be sold by the pint alone and other goods may be sold by the pint if the equivalent metric measure is also given.

Since the majority of countries in the world no longer use American or British imperial units, and most are non-English speaking, a "pint of beer" served in a tavern outside the United Kingdom and the United States may be measured by other standards. In Commonwealth countries it may be a British imperial pint of 568 ml, in countries serving large numbers of American tourists it might be a US liquid pint of 473 ml, in many metric countries it is a half-litre of 500 ml, or in some places it is another measure reflecting national and local laws and customs.^[5]

Historically, units called a pint (or the equivalent in the local language) were used across much of Europe, with values varying between countries from less than half a litre to over one litre. Within continental Europe, these pints were replaced with liquid measures based on the metric system during the 19th century. The term is still in limited use in parts of France, where "une pinte" means an imperial quart, which is 2 imperial pints, whereas a pint is "une chopine"—and Central Europe, notably some areas of Germany^[6] and Switzerland, where "ein Schoppen" is colloquially used for roughly half a litre. In Spanish holiday resorts frequented by British tourists, 'pint' is often taken to mean a beer glass (especially a dimple mug). Half-pint and pint mugs may therefore be referred to as pinta pequeña ('small pint') and pinta grande ('large pint').

Name[]

Pint comes from the Old French word pinte and perhaps ultimately from Vulgar Latin pincta meaning "painted", for marks painted on the side of a container to show capacity.^[7] It is linguistically related, though greatly diverging in meaning, to Pinto – an Italian, Spanish, and Portuguese name for a person with a speckled or dark complexion, often used as a surname in these languages.

Definitions[]

Imperial pint[]

The imperial pint is equal to one eighth of an imperial gallon.

Imperial pint cans (568 ml) commonly found in British supermarkets

1 imperial pint	=	1⁄8	imperial gallon
	=	1⁄2	imperial quart
	=	4	imperial gills
	=	20	imperial fluid ounces
	=	568.26125	millilitres (exactly)[a][8]
	≈	34.677429099	cubic inches[b]
	≈	1.2009499255	US liquid pints
	≈	1.0320567435	US dry pints
	≈	19.21519881	US fluid ounces
	≈	the volume of 20 oz (567 g) of water at 62 °F (16.7 °C)

US liquid pint[]

In the United States, the liquid pint is legally defined as one eighth of a liquid gallon of precisely 231 cubic inches.

1 US liquid pint	=	1⁄8	US liquid gallon
	=	1⁄2	US liquid quart
	=	2	US cups
	=	4	US fluid gills
	=	16	US fluid ounces
	=	128	US fluid drams
	=	28.875	cubic inches (exactly)[b]
	=	473.176473	millilitres (exactly)[c]
	≈	0.83267418463	imperial pints
	≈	0.85936700738	US dry pints
	≈	16.65348369	imperial fluid ounces
	≈	the volume of 1.041 lb (472 g) of water at 62 °F (16.7 °C)

US dry pint[]

In the United States, the dry pint is one sixty-fourth of a bushel.

1 US dry pint	=	0.015625 US bushels
	=	0.0625 US pecks
	=	0.125 US dry gallons
	=	0.5 US dry quarts
	=	33.6003125 cubic inches
	=	550.6104713575 millilitres[c]
	≈	0.96893897192092 imperial pints
	≈	1.1636471861472 US pints

Other pints[]

Blueberries labelled in English (1 US DRY PINT) and French (1 CHOPINE SÈCHE US 551 ml) for sale in the US and Canada

The United States dry pint is equal to one eighth of a United States dry gallon. It is used in the United States, but is not as common as the liquid pint.

A now-obsolete unit of measurement in Scotland, known as the Scottish pint, or joug, is equal to 1696 ml (2 pints 19.69 imp fl oz). It remained in use until the 19th century, surviving significantly longer than most of the old Scottish measurements.

The word pint is one of numerous false friends which exist between English and French. They are not the same unit although they have the same linguistic origin. The French word pinte is etymologically related, but historically described a larger unit. The Royal pint (pinte du roi) was 48 French cubic inches (952.1 ml),^[9] but regional pints varied in size depending on locality and on commodity (usually wine or olive oil) varying from 0.95 l to over 2 l.^[9]

In Canada, the Weights and Measures Act (R.S. 1985), which has the laws in English and French printed side-by-side, defines a pint in English as 1/8 of a gallon, but defines a pinte in French as 1/4 of a gallon.^[10] Thus, if you speak English and order "a pint of beer", servers are legally required to serve you 568 ml of beer,^[11] but if you speak French and order "une pinte de bière", they are legally required to serve an imperial quart (une pinte), which is 1136 ml, or twice as much.^[12] To order an imperial pint when speaking French in Canada, one must instead order une chopine de bière.^[13]

In Flanders, the word pintje, meaning 'little pint', refers only to a 250 ml glass of lager. Some West- and East-Flemish dialects use it as a word for beaker. The equivalent word in German, Pintchen, refers to a glass of a third of a litre in Cologne and the Rhineland.

In South Australia, ordering "a pint of beer" results in 425 ml (15 fl oz) being served. Customers must specifically request "an Imperial pint of beer" to get 570 ml (20 fl oz). Australians from other states often contest the size of their beers in Adelaide.^[14]

Equivalence[]

One US fluid pint of water weighs 1.04318 pounds (16.69081 ounces), which gives rise to a popular saying: "A pint's a pound, the world around".^[15] However, the statement does not hold around the world because the British imperial pint, which was also the standard measure in Australia, India, Malaya, New Zealand, South Africa, and other former British colonies, weighs 1.2528 pounds, which is where another popular saying used in Commonwealth countries came from: "a pint of pure water weighs a pound and a quarter".^[16]

History[]

The pint is traditionally one eighth of a gallon. In the Latin of the apothecaries' system, the symbol O (octavius or octarius; plural octavii or octarii – reflecting the "eighth" concept in its octa- syllable) was used for the pint.^[17] Because of the variety of definitions of a gallon, there have been equally many versions of the pint.

America adopted the British wine gallon, defined in 1707 as 231 cubic inches exactly (3 in × 7 in × 11 in) as its basic liquid measure, from which the US wet pint is derived; and the British corn gallon (1⁄8 of a standard "Winchester" bushel of corn, or 268.8 cubic inches) as its dry measure, from which the US dry pint is derived.

In 1824, the British parliament replaced all the various gallons with a new imperial gallon based on ten pounds of distilled water at 62 °F (16.667 °C) (277.42 cubic inches), from which the current UK pint is derived.

The various Canadian provinces continued to use the Queen Anne Winchester wine gallon as a basis for their pint until 1873, well after Britain adopted the imperial system in 1824. This made the Canadian pint compatible with the American pint, but after 1824 it was incompatible with the British pint. The traditional French "pinte" used in Lower Canada (Quebec) was twice the size of the traditional English "pint" used in Upper Canada (Ontario), about 1 litre versus 0.5 litres. After four of the British provinces united in the Canadian Confederation in 1867, Canada legally adopted the British imperial system of measure in 1873, making Canadian liquid units incompatible with American ones from that year forward.^[18] In 1873, the French Canadian "pinte" was defined as being one imperial quart or two imperial pints, while the imperial pint was legally called a "chopine" in French Canada. Canadian imperial units of liquid measure remain incompatible with American traditional units to this day, and although the Canadian pint, quart, and gallon are still legal units of measure in Canada, they are still 20% larger than the American ones.

Effects of metrication[]

In the British and Irish metrication processes, the pint was replaced by metric units as the legally defined primary unit of measure for trading by volume or capacity, except for the sale of draught beer and cider, and milk in returnable containers.^[19] The pint can still be used in those countries as a supplementary unit in all circumstances. UK legislation mandates that draught beer and cider must be sold in a third of a pint, two thirds of a pint or multiples of half a pint, which must be served in stamped, measured glasses or from government-stamped meters. For milk, if returnable containers are used, the pint can still be the principal unit used, however all other goods sold by volume must be sold by metric. Milk in returnable containers is considered a loose good instead of a packaged good, as it is sold by volume. Milk in plastic containers come in 1 pint sizes, but are required to display the metric equivalent on packaging.^[20] Many recipes published in the UK and Ireland give ingredient quantities in imperial, where the pint is often used as a unit for larger liquid quantities. The British Virgin Islands, which still uses the imperial system for most purposes, also requires^{[citation needed]} that beer and cider be sold in pints.

In Australia and New Zealand, a subtle change was made to 1-pint milk bottles during the conversion from imperial to metric in the 1970s. The height and diameter of the milk bottle remained unchanged, so that existing equipment for handling and storing the bottles was unaffected, but the shape was adjusted to increase the capacity from 568 ml to 600 ml—a conveniently rounded metric measure. Such milk bottles are no longer officially referred to as pints. However, the "pint glass" in pubs in Australia remains closer to the standard imperial pint, at 570 ml. It holds about 500 ml of beer and about 70 ml of froth, except in South Australia, where a pint is served in a 425 ml glass and a 570 ml glass is called an "imperial pint". In New Zealand, there is no longer any legal requirement for beer to be served in standard measures: in pubs, the largest size of glass, which is referred to as a pint, varies, but usually contains 425 ml.^[21]

In Canada, the "pint of beer" served in pubs and bars has long been considered a colloquial term for "a large glass of beer". Legally speaking, after 1873, it was defined as one British imperial pint of 20 imperial ounces. On the other hand, the United States continued to use the smaller Winchester standard pint while in French Canada after 1873 a "pinte de bière" was defined as a much larger 40-ounce quart of beer, so confusion arose to which was being used. Prior to 1961, bottled beer in Canada was served in two sizes, colloquially known as "quarts" and "pints". They were 22 and 12 imperial ounces (625 and 341 ml), respectively, which were much smaller than the British units.^{[citation needed]} Some provinces banned the sale of beer in the larger bottle. For example, in Ontario in the 1950s only the smaller size could be sold, but in Quebec both sizes were about equally common. The numerous incompatibilities between traditional Canadian, British, French, and American unit systems was one of the driving forces behind metrication in Canada.

Draft beer in Canada, when advertised as a "pint", is legally required to be 568 ml (20 fluid ounces).^[22] With the allowed margin of error of 0.5 fluid ounces, a "pint" that is less than 554 ml of beer is an offence, though—to the detriment of consumers—this regulation is often violated and rarely enforced.^[23]

After metrication in Canada, companies sold milk and other liquids in metric units so conversion issues could no longer arise. Legally speaking, although some British imperial units are still legally usable in Canada, as a result of Canada's colonial history, the "pint" served in drinking establishments in Canada should be the larger 20-ounce British imperial pint, rather than the smaller American pint. Under the Canada Weights and Measures Act, if asked for a "pint of beer", businesses should serve customers 0.568 litres of beer with an accuracy of 0.5%, and if asked for a "pinte de bière" they should serve them 1.136 litres.^[24] To avoid legal issues, many drinking establishments are moving away from using the term "pint" and are selling "glasses" or "sleeves" of beer, neither of which have a legal definition.^[25] In Canada, water amounts in air purifiers are advertised in pints as well as BTUs (British thermal units).

A 375 ml bottle of liquor in the US and the Canadian maritime provinces is sometimes referred to as a "pint" and a 200 ml bottle is called a "half-pint", harking back to the days when liquor came in US pints, fifths, quarts, and half-gallons.^[26] Liquor in the US has been sold in metric-sized bottles since 1980 although beer is still sold in US traditional units.^[27]

In France, a standard 250 ml measure of beer is known as un demi ("a half"), originally meaning a half-pint.

Notes[]

References[]

External links[]

Look up pint in Wiktionary, the free dictionary.

Wikimedia Commons has media related to Pint.

• European Commission press release (IP/07/1297, 11 September 2007): Pints and miles will not disappear due to European Commission proposal