Prismatic joint
Prismatic joint seen in 2-dimensional form. Only linear motion is possible. In contrast to a revolute joint the axis is prevented from rotating (this can be accomplished by giving the axis a prismatic shape which is not visible here).
A prismatic joint provides a linear sliding movement between two bodies, and is often called a slider, as in the slider-crank linkage. A prismatic pair is also called a sliding pair. A prismatic joint can be formed with a polygonal cross-section to resist rotation. See for example the dovetail joint and linear bearings.
The relative position of two bodies connected by a prismatic joint is defined by the amount of linear slide of one relative to the other one. This one parameter movement identifies this joint as a one degree of freedom kinematic pair.[1]
Prismatic joints provide single-axis sliding often found in hydraulic and pneumatic cylinders.[2]
See also[]
References[]
- ^ Norton, Robert L. (2008). "2". Design of Machinery (4th ed.). Boston, MA: McGraw Hill Higher Education. p. 33. ISBN 978-0-07-312158-1.
- ^ Robotics Research Group. "Joint Types". University of Texas at Austin. Archived from the original on 2009-03-11. Retrieved 2009-02-04.
 | This classical mechanics–related article is a stub. You can help Wikipedia by . |
Categories:
- Kinematics
- Rigid bodies
- Classical mechanics stubs