S-mount (CCTV lens)

This article needs additional citations for verification. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (February 2017) (Learn how and when to remove this template message)

S-mount camera PCB. The right one with lens detached shows a 1/3" CCD sensor. Spring is used to push and secure the lens when mounted.

The S-mount is a standard lens mount used in various surveillance CCTV cameras and webcams. It uses a male metric M12 thread with 0.5 mm pitch on the lens and a corresponding female thread on the lens mount; thus an S-mount lens is sometimes called an "M12 lens". Because the lens mounts are usually attached directly to the PCB of the sensor, the standard is often called "board lens". The supported sensor formats range from smaller than 1/6-inch type up to 1-inch having an 16mm diagonal sensor. The lenses lack an iris control. S-mount lenses do not have a flange and therefore there is no fixed lens to sensor distance and they must be adjusted to focus.^[1]

See also[]

• ISO metric screw thread
• Lens board

References[]