Static load testing

From Wikipedia, the free encyclopedia
Kentledge load testing in Haikou, Hainan, China

Static load testing is an in situ type of load testing used in geotechnical investigation to determine the bearing capacity of deep foundations prior to the construction of a building. It differs from the statnamic load test and dynamic load testing in that the pressure applied to the pile is slower.[1][2] Static load testings are performed in order to measure a design’s axial tension or axial compression. It can also be used to measure its deflected shape under lateral load[3]

Kentledge load testing method[]

Kentledge refers to iron weights used as permanent ship ballast, or iron or concrete weights used in load testing. This method involves the construction of a platform upon which massive weights are placed. These weights bear down on the pile putting it under load. Gauges measure resistance, movement of the pile, and other readings to determine the properties of the ground.

References[]

  1. ^ Handbook on Pile Load Testing, Federation of Piling Specialists, February 2006
  2. ^ Static Pile Load Testing Manual, GCP-18, State of New York: Department of Transportation: Geotechnical Engineering Bureau, August 2015
  3. ^ "Pile Movement Analysis with Static Load Testing". GRL. Retrieved 2020-04-10.

External links[]

Retrieved from ""