Steering linkage
This article does not cite any sources. (July 2012) |
This article needs attention from an expert in Automobiles. The specific problem is: A LOT of blank space here.(July 2012) |
A steering linkage is the part of an automotive steering system that connects to the front wheels.
The steering linkage which connects the steering gearbox to the front wheels consists of a number of rods. These rods are connected with a socket arrangement similar to a ball joint, called a tie rod end, allowing the linkage to move back and forth freely so that the steering effort will not interfere with the vehicles up-and-down motion as the wheel moves over roads . The steering gears are attached to a rear rod which moves when the steering wheel is turned. The rear rod is supported at one end.
Technology[]
Most modern cars have a full mechanical steering linkage system, but a recent innovation is the steer by wire system.
Example Simulations[]
Ackermann steering
Bell-crank steering
Rack-and-pinion steering
Short rack-and-pinion steering
See also[]
References[]
External links[]
Video clips[]
- Automotive steering technologies
- Linkages (mechanical)