Taff Vale Railway O1 class

This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (December 2014) (Learn how and when to remove this template message)

Taff Vale Railway O1 class
No 28 when first restored to working order in 1983 by the Caerphilly Railway Society
hideType and origin Power type Steam Designer Tom Hurry Riches Builder Kitson & Co. (8), TVR Cardiff West (6) Serial number Kitson 3572–3579 Build date 1894 (8), 1897 (6) Total produced 14
hideSpecifications Configuration: ​  • Whyte 0-6-2T  • UIC C1 n2t Gauge 4 ft 8+1⁄2 in (1,435 mm) standard gauge Driver dia. 4 ft 6+1⁄2 in (1.384 m) Loco weight 56 long tons 8 cwt (126,300 lb or 57.3 t) (63.2 short tons) Fuel type Coal Boiler pressure 150 psi (1.03 MPa) Cylinders Two Cylinder size 17.5 in × 26 in (444 mm × 660 mm) Valve gear Stephenson
hidePerformance figures Tractive effort 18,620 lbf (82.83 kN)
hideCareer Operators TVR » GWR Withdrawn 1925–1931 Preserved One: No.28 Disposition One preserved, remainder scrapped

The Taff Vale Railway O1 class was a class of 0-6-2T steam tank locomotives designed by Tom Hurry Riches and introduced to the Taff Vale Railway in 1894.

Numbering[]

Withdrawal and disposal[]

All were withdrawn from traffic between 1925 and 1931.^[1]

Locomotive 28[]

Locomotive No. 28 is the last surviving Welsh-built standard gauge locomotive. It began its TVR career working the mineral and coal trains from collieries to port. By 1922 when the Great Western Railway had taken control, it had run 483,189 miles, and by 1923 was given a major overhaul, receiving a new boiler from the West Yard Works.^[2]

Absorbed into the GWR fleet, No. 28 was renumbered No. 450, and given a GWR-style cover over its safety valve, its external design was unchanged. It was withdrawn from service on 30 October 1926, but was found to be in good mechanical condition and sold to the Government in 1927, for use on the Woolmer Military Instructional Railway, later called the Longmoor Military Railway. The engine was named "Gordon", after the General of Khartoum, and was kept in immaculate condition in Hampshire, performing relatively light duties compared to its TVR working days.^[3]

The Second World War broke out and No. 28 was renumbered W.D. 205, then W.D. 70205, before becoming surplus again and put into storage. It was then sold in 1947 to the National Coal Board and used at their Hetton colliery railway. It was renumbered No. 67, though still retaining the "Gordon" nameplates as it engaged in heavy work on the coalfields again. It received a major overhaul in 1955, with minor alterations to its external design, but by 1959 it needed boiler repairs and was withdrawn from service in 1960.^[4]

Preservation[]

No. 28 photographed at the Gwili Railway in September 2018, where it is a static exhibit.

Following requests to NCB that it should be saved, locomotive 28 was successfully presented to British Railways for preservation in 1962. It is now part of the National Collection. It was originally intended that the last Welsh-built standard gauge locomotive be restored to original TVR condition at the Caerphilly Locomotive Works, however the site was given notice of closure and No. 28 was the last to leave for storage in Swindon and London.^[5][6]

In 1966, it was returned to Caerphilly as the National Museum of Wales had been given custodianship of the locomotive. During the late 1960s and early 1970s the engine was restored to working order by the Caerphilly Railway Society and ran for about 7 years from 1983, until taken out of service to await routine boiler examination. Caerphilly Railway Society subsequently closed.^[7] The locomotive then spent over a decade on loan to the Dean Forest Railway who dismantled it for a more thorough restoration, but this was unsuccessful due to the discovery of cracked springs.^[8]

The NRM later in 2013 moved the locomotive to the Llangollen Railway where it was to be reassembled.^[9] In 2013 the cosmetic restoration of No. 28 was set to go ahead thanks to a three-way partnership between the National Railway Museum, the Llangollen Railway, and the Gwili Railway, with the aim of returning the locomotive to original condition.^[10][11] In 2014 it moved to the Gwili Railway on static loan under the care of the Gwili Vintage Carriages Group, with the current agreement due to expire in February 2020.^{[citation needed]}

On 1 October 2019 the National Railway Museum and Welsh Railways Trust (Formerly Gwili Vintage Carriages Group) announced a three-year overhaul agreement to return it to steam in a £160,000 project, part-funded by a £18,000 grant from the Association for Industrial Archaeology. This grant will be used to restore the rolling chassis of the locomotive, which includes original Taff Vale Railway components. The overhaul will be carried out at the Gwili Railway, where it will then work.^{[citation needed]}

References[]

• Casserley, H. C. & Johnston, Stuart W. (1966). Locomotives at the Grouping 4: Great Western Railway. Shepperton, Middlesex: Ian Allan Limited. p. 79.
• Jones, Dr Stuart Owen (1990). The Last Survivor, Locomotive No. 28 of the Taff Vale Railway. Cardiff: National Museum of Wales. ISBN 0-7200-0341-5.
• The Locomotives of the Great Western Railway, Part Ten, Absorbed Engines 1922-1947. Railway Correspondence and Travel Society. 1966.

Wikimedia Commons has media related to Taff Vale Railway O1 class.