Vampire tap

This article does not cite any sources. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (July 2011) (Learn how and when to remove this template message)

10BASE5 vampire tap Medium Attachment Unit (Transceiver)

Dismantled vampire tap. Central metal-tipped insulated spike contacted cable core; smaller spikes contacted cable shield. Note black mark on cable sheath indicating suitable location for transceiver.

A vampire tap (also called a piercing tap) was a device for physically connecting a station, typically a computer, to a network that used 10BASE5 cabling. This device clamped onto and "bit" into the cable (hence the name "vampire"), inserting a probe through a hole drilled using a special tool through the outer shielding to contact the inner conductor, while other spikes bit into the outer conductor. The vampire tap usually had an integrated AUI (Attachment Unit Interface), from which a short multicore cable connected to the network card in the station.

Vampire taps allowed new connections to be made on a given physical cable while the cable was in use. This allowed administrators to expand bus-topology network sections without interrupting communications. Without a vampire tap, the cable had to be cut and connectors had to be attached to both ends.

See also[]

• Network tap
• Insulation-displacement connector, another insulation-piercing system

External links[]

• Image of a Vampire Tap

This computer networking article is a stub. You can help Wikipedia by .

• v
• t

This computer hardware article is a stub. You can help Wikipedia by .

• v
• t