This article has multiple issues. Please help or discuss these issues on the talk page. (Learn how and when to remove these template messages)
This article needs additional citations for verification. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: – ···scholar·JSTOR(January 2021) (Learn how and when to remove this template message)
This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations.(January 2021) (Learn how and when to remove this template message)
(Learn how and when to remove this template message)
Westinghouse air brake (installed later), block brake (acting on the friction gears), band brake (acting on the crank disks of the transmission gears), spindle brake and steam brake with lateral blocks (acting on the rear ring gear), drum for Heberlein brake.
Performance figures
Maximum speed
50 or 20 km/h (31 or 12 mph)
Career
Numbers
K.W.St.E. 691–694
later 591–599
DR: 97 301 – 97 307
Retired
1930
The Württenberg Fz was a class of nine 2-6-0Track locomotives of the Royal Württemberg State Railways (Königlich Württembergischen Staats-Eisenbahnen, K.W.St.E.). Seven of the Riggenbach rack system locomotives (Nos. 591 to 596 and 599) were taken over by the Deutschen Reichsbahn and were placed in class (Baureihe) 97.3 in their 1925 renumbering plan.
The first four locomotives were named ACHALM, GRAFENECK,LICHTENSTEIN and MÜNSINGEN and were used on the Honau–Lichtenstein rack railway line. The five later locomotives were used between Freudenstadt and Klosterreichenbach [de]. In contrast to the first four, these vehicles had a connecting pipe between the two steam domes.
General arrangement drawing of the Württemberg Fz
The boiler and running gear were derived from the .
The locomotives had rack gears on the first and second axles, which were driven by a small gear in between. The small gear itself was driven by the inner two cylinders of the four-cylinder steam engine. The locomotives could be operated either as a compound, or as a four-cylinder simple. The valve gear and rack system drive were so complex and prone to failure that the locomotives were withdrawn and scrapped by the Deutsche Reichsbahn by 1930. The boiler also did not meet the requirements. The rack drive had to be kept engaged almost continuously when driving up the mountain, since the steam was used up too quickly, and stop had to be made for a 'breather' or 'blow up'.