Yoram Koren

From Wikipedia, the free encyclopedia
Yoram Koren
Yoram Koren.png
Known forReconfigurable Manufacturing System
CNC and Adaptive Control
Mobile Robot
Scientific career
FieldsManufacturing
Robotics
InstitutionsUniversity of Michigan
Technion – Israel Institute of Technology

Yoram Koren is an Israeli-American academic. He is the James J. Duderstadt Distinguished University Professor Emeritus of Manufacturing and the Paul G. Goebel Professor Emeritus of Engineering at the University of Michigan, Ann Arbor.[1] Since 2014 he is a Distinguished Visiting Professor at the Technion – Israel Institute of Technology.[2]

Koren has been made a member of the National Academy of Engineering (NAE),[3] and an Honorary Member of the Society of Manufacturing Engineers (SME).[4] He is a Fellow of the International Academy for Production Engineering (CIRP),[5] the Society of Manufacturing Engineers (SME), the American Society of Mechanical Engineers (ASME),[6] and of the Institute of Electrical and Electronics Engineers (IEEE) “for contributions to flexible automation and manufacturing systems”.[7]

Early life and education[]

Yoram Koren was born in Tel-Aviv, Mandatory Palestine. He studied at Ironi Alef High School in Tel-Aviv and served at the Israeli Air Force as an electronics technician.[citation needed]

He received B.Sc. in Electrical Engineering from the Technion - Israel Institute of Technology, in 1965. His M.Sc. was received from the same department in 1968. He continued his Ph.D. studies in Mechanical Engineering at the Technion and graduated in January 1971.[8] His thesis on "Model and Optimization of a Machining Process and its Control", was supervised by Prof. Ehud Lenz.[9]

Career[]

Koren started his career at the Technion–Israel Institute of Technology, where he was a Lecturer from 1971 to 1973, and a professor from 1975 to 1985. Koren was the Head of the Technion Robotics Laboratory from 1982 to 1985. From 1980 to 1982, Koren was on sabbatical and leave of absence at the University of Michigan, where he was the Paul G. Goebel Visiting Professor of Engineering. In 1986 he joined U-M as a tenured professor, and in 1993 he was approved as the Paul G. Goebel Professor of Engineering by the Board of Regents.[10] In 2010 Koren was named the James J. Duderstadt Distinguished University Professor of Manufacturing.[1]

Koren retired in 2014, becoming a professor emeritus. Since 2015 Koren has been a Distinguished Visiting Professor at Technion, where he was also the Edmond J. Safra Distinguished Visiting Professor Chair in 2007.[2]

Koren is the founding director (in 1996) of the NSF-sponsored Engineering Research Center (ERC) for Reconfigurable Manufacturing Systems (RMS),[11] an ERC that was financially sponsored (at $47 million) by the National Science Foundation and 25 industrial companies until 2012. Under Koren's leadership, 70 Ph.D. students and 270 M.S. graduated from the RMS center.[11]

Research[]

Koren is a member of the U.S. National Academy of Engineering (NAE) “For contributions to the science, education, and practice of manufacturing through innovations in reconfigurable manufacturing systems, robotics, and manufacturing system control”.[12]

Koren holds at least 14 U.S. patents in these fields.[13] He has published 4 books and more than 300 scholarly papers that have over 31,000 citations, with an h-index of 77 (according to Google Scholar).[14]

Flexible Automation and CNC[]

Koren's research in the 1970s was focused on developing methods for the precise control of CNC (computer numerically controlled) machines aimed at enhancing their precision and increasing their productivity.[15] In 1973 Koren invented the first computerized real-time adaptive controller for a milling machine.[16][17] In 1976 Koren published the first scientific paper on interpolators for CNC machines.[18] In 1980 he published the Cross-Coupled Controller[disambiguation needed] technique for enhancing CNC precision by software.[19]

Robotics[]

Koren started his robotics research (and mobile robot research in particular) in 1980. Koren and Johann Borenstein developed the autonomous mobile robot CARMEL (Computer-Aided Robotics for Maintenance, Emergency, and Life-support), featured on a CNN national program in 1988.[20] CARMEL's motion algorithms are described in [Papers 9, 10]. In 1992, CARMEL won the first Autonomous Mobile Robot Competition sponsored by the Association for the Advancement of Artificial Intelligence.[21][22]

Shan and Koren were the first to develop a model of how external objects could affect kinematic constraints on the movement of a snake robot in 1993.[23][24] Their robot involved flat surface locomotion with sideslip constraints, but did not involve position or heading control.[25]

Reconfigurable Manufacturing Systems (RMS)[]

Koren is the inventor of the Reconfigurable Machine Tool,[26] the Reconfigurable Manufacturing Systems,[27][28] and the Reconfigurable Apparatus for Inspection.[29] Koren introduced the RMS structural architecture and its benefits to the international manufacturing research community in 1999.[30] Koren presented at the CIRP Annual Meeting in France the keynote paper “Reconfigurable Manufacturing Systems”, defining RMS as: “A manufacturing system that has an adjustable structure that enable rapid system scalability in response to market demands, and system adaptability to new products”.[31] He is credited with identifying the basic principles of such systems.[30][32][33]

Mass-Individualization[]

Koren proposed a new manufacturing system architecture that enables producing Market-of-One products at affordable cost. [Papers 14, 15].[34] To achieve buyer's satisfaction, proximity between the mass-individualization factory and the customer is required.[35]

Books[]

  • Koren, Y.; Ben-Uri, J. (1978). Numerical Control of Machine Tools. Khanna Publishers.
  • Koren, Yoram (1983). Computer control of manufacturing systems. New York: McGraw-Hill. ISBN 978-0070353411.
  • Koren, Yoram (1985). Robotics for engineers. New York: McGraw-Hill. ISBN 978-0070353992. (This book was also translated by the publisher to Japanese and French)
  • Koren, Yoram (2010). The Global Manufacturing Revolution: Product-Process-Business Integration and Reconfigurable Systems (1st ed.). New York, NY: Wiley. ISBN 978-0-470-92080-0. (This book was also translated to Chinese).

Selected articles[]

RMS[]

  1. Koren, Y.; Heisel, U.; Jovane, F.; Moriwaki, T.; Pritschow, G.; Ulsoy, G.; Van Brussel, H. (1 January 1999). "Reconfigurable Manufacturing Systems". CIRP Annals. 48 (2): 527–540. doi:10.1016/S0007-8506(07)63232-6. ISSN 0007-8506.
  2. Mehrabi, M. G.; Ulsoy, A. G.; Koren, Y. (1 August 2000). "Reconfigurable manufacturing systems: Key to future manufacturing". Journal of Intelligent Manufacturing. 11 (4): 403–419. doi:10.1023/A:1008930403506. ISSN 1572-8145.
  3. Koren, Yoram; Shpitalni, Moshe (October 2010). "Design of reconfigurable manufacturing systems" (PDF). Journal of Manufacturing Systems. 29 (4): 130–141. doi:10.1016/J.JMSY.2011.01.001.
  4. Koren, Yoram; Gu, Xi; Guo, Weihong (16 March 2018). "Reconfigurable manufacturing systems: Principles, design, and future trends". Frontiers of Mechanical Engineering. 13 (2): 121–136. doi:10.1007/s11465-018-0483-0. ISSN 2095-0233.

CNC[]

  1. Koren, Yoram (January 1976). "Interpolator for a Computer Numerical Control System" (PDF). IEEE Transactions on Computers. C-25 (1): 32–37. doi:10.1109/TC.1976.5009202.
  2. Koren, Yoram (1 December 1980). "Cross-Coupled Biaxial Computer Control for Manufacturing Systems". Journal of Dynamic Systems, Measurement, and Control. 102 (4): 265–272. doi:10.1115/1.3149612. ISSN 0022-0434.
  3. Lin, Rong-Shine; Koren, Y. (1 February 1996). "Efficient Tool-Path Planning for Machining Free-Form Surfaces". Journal of Engineering for Industry. 118 (1): 20–28. doi:10.1115/1.2803642. ISSN 0022-0817.
  4. Koren, Yoram (1 November 1997). "Control of Machine Tools" (PDF). Journal of Manufacturing Science and Engineering. 119 (4B): 749–755. doi:10.1115/1.2836820.

Robotics[]

  1. Borenstein, J.; Koren, Y. (1991). "The vector field histogram-fast obstacle avoidance for mobile robots" (PDF). IEEE Transactions on Robotics and Automation. 7 (3): 278–288. doi:10.1109/70.88137.
  2. Koren, Y.; Borenstein, J. (1991). "Potential field methods and their inherent limitations for mobile robot navigation" (PDF). Proceedings. 1991 IEEE International Conference on Robotics and Automation: 1398–1404. doi:10.1109/ROBOT.1991.131810.
  3. Shan, Y.; Koren, Y. (1993). "Design and motion planning of a mechanical snake". IEEE Transactions on Systems, Man, and Cybernetics. 23 (4): 1091–1100. doi:10.1109/21.247890.
  4. Shoval, S.; Borenstein, J.; Koren, Y. (1998). "The NavBelt-a computerized travel aid for the blind based on mobile robotics technology" (PDF). IEEE Transactions on Biomedical Engineering. 45 (11): 1376–1386. doi:10.1109/10.725334.

Mass-Individualization[]

  1. Koren, Y.; Hu, S.J.; Gu, Peihua; Shpitalni, M. (2013). "Open-architecture products". CIRP Annals. 62 (2): 719–729. doi:10.1016/j.cirp.2013.06.001.
  2. Koren, Y.; Shpitalni, M.; Gu, P.; Hu, S.J. (2015). "Product design for mass-individualization". Procedia CIRP. 36: 64–71. doi:10.1016/j.procir.2015.03.050.
  3. Koren, Yoram (2021). "The Local Factory of the Future for Producing Individualized Products". The Bridge. 51 (1): 20–26.

Honors and Awards[]

  • CIRP Fellow (1985)[5]
  • SME Fellow (1987)[4]
  • ASME Fellow (1990)[6]
  • Member of National Academy of Engineering (2004)[3]
  • Hideo Hanasufa Outstanding Investigator Award (2004)[36]
  • M. Eugene Merchant Manufacturing Medal of ASME/SME (2006)[37]
  • Yoram and Alina Koren Conference Room at the University of Michigan (2012)[38]
  • IEEE Life Fellow (2013)[7]
  • SME Honorary Member (2015)[39]

Personal life[]

Yoram is married to Alina (MA in literature) who was a lecturer at the University of Michigan, and they have two children: Shlomy and Esther (who died in October 2020).[40]

References[]

  1. ^ a b "Koren Appointed to a Distinguished University Professorship". Mechanical Engineering, University of Michigan. Retrieved 7 December 2021.
  2. ^ a b "Yoram Koren". Technion.
  3. ^ a b "Dr. Yoram Koren". NAE Website.
  4. ^ a b "SME Fellows" (PDF). SME Website.
  5. ^ a b "CIRP Member List". CIRP Website.
  6. ^ a b "ASME Fellows" (PDF). ASME Website.
  7. ^ a b "Yoram Koren - Life Fellow". IEEE.
  8. ^ "Bio - Professor Yoram Koren". University of Michigan.
  9. ^ Lenz, Ehud. "Curriculum Vitae" (PDF). Technion. Retrieved 7 December 2021.
  10. ^ University of Michigan Board of Regents (1993). Proceedings of the Board of Regents. Ann Arbor, Michigan: University of Michigan. p. 278. Retrieved 7 December 2021.
  11. ^ a b "Engineering Research Center (ERC) for Reconfigurable Manufacturing Systems (RMS)".
  12. ^ "Dr. Yoram Koren". NAE.
  13. ^ "Yoram Koren inventor". Google Patents.
  14. ^ "Dr. Yoram Koren's Google Scholar". Google Scholar.
  15. ^ Kumar, R. Suresh; Thangarasu, V. S.; Alexis, S. John (15 May 2016). "Adaptive control systems in CNC machining processes--a review". Advances in Natural and Applied Sciences. 10 (6 SE): 120–130. Retrieved 7 December 2021.
  16. ^ "Mass customization: The factory of the future". Siemens. Retrieved 7 December 2021.
  17. ^ "Research Milestones - 1973 NUMERICAL CONTROL". University of Michigan.
  18. ^ Suryawanshi, Aniket T; Sudhakar, D S S; Patil, Bhushan T (1 June 2020). "Low cost and open source software-based CNC router for machining contours". IOP Conference Series: Materials Science and Engineering. 872 (1): 012084. doi:10.1088/1757-899X/872/1/012084. Retrieved 7 December 2021.
  19. ^ Hecker, R. L.; Flores, G. M.; Xie, Q.; Haran, R. (January 2008). "Servocontrol of machine-tools: a review". Latin American applied research. 38 (1): 85–94. ISSN 0327-0793. Retrieved 7 December 2021.
  20. ^ "CARMEL Robot Featured on CNN". CNN.
  21. ^ Congdon, Clare; Huber, Marcus; Kortenkamp, David; Konolige, Kurt; Myers, Karen; Saffiotti, Alexandro; Ruspini, Enrique (15 March 1993). "Carmel Versus Flakey: A Comparison of Two Winners". AI Magazine. 14 (1): 49–49. doi:10.1609/aimag.v14i1.1031. Retrieved 7 December 2021.
  22. ^ Kortencamp, David (1994). "Perception for Mobile Robot Navigation: A survey of the state of the art". Dual-use Space Technology Transfer Conference and Exhibition: Proceedings of a Conference and Exhibition Held at Lyndon B. Johnson Space Center, Houston, Texas, February 1-3, 1994. Vol. 2. National Aeronautics and Space Administration. pp. 446–453. Retrieved 7 December 2021.
  23. ^ Kyriakopoulos, K.J.; Sarrigeorgides, K.; Migadis, G. (6 December 2012). "18 A Novel Robotic Snake". In Tzafestas, S. G. (ed.). Advances in Intelligent Autonomous Systems. Dordrecht: Springer Science & Business Media. pp. 407–424. ISBN 978-94-011-4790-3. Retrieved 7 December 2021.
  24. ^ Transeth, Aksel Andreas; Pettersen, Kristin Ytterstad; Liljebäck, Pål (December 2009). "A survey on snake robot modeling and locomotion". Robotica. 27 (7): 999–1015. doi:10.1017/S0263574709005414. ISSN 1469-8668. Retrieved 7 December 2021.
  25. ^ Liljebäck, Pål; Pettersen, Kristin Ytterstad; Stavdahl, Øyvind; Gravdahl, Jan Tommy (13 June 2012). Snake Robots: Modelling, Mechatronics, and Control. Springer Science & Business Media. pp. 15, 22–23. ISBN 978-1-4471-2996-7. Retrieved 7 December 2021.
  26. ^ "Reconfigurable machine tool". Google Patents.
  27. ^ Benyoucef, Lyes (2020). Reconfigurable Manufacturing Systems: From Design to Implementation. Switzerland: Springer Nature. pp. 181–183. ISBN 978-3-030-28782-5. Retrieved 7 December 2021.
  28. ^ "Reconfigurable manufacturing system having a production capacity method for designing same and method for changing its production capacity". Google Patents.
  29. ^ "Reconfigurable apparatus and method for inspection during a manufacturing process". Google Patents.
  30. ^ a b Nokucinga Majija; Khumbulani Mpofu; Dithoto Modungwa (2013). "Conceptual Development of Modular Machine Tools for Reconfigurable Manufacturing Systems". In Azevedo, Américo (ed.). Advances in sustainable and competitive manufacturing systems : 23rd International Conference on Flexible Automation and Intelligent Manufacturing. Cham: Springer. pp. 470–471. ISBN 9783319005577. Retrieved 7 December 2021.
  31. ^ Koren, Y.; Heisel, U.; Jovane, F.; Moriwaki, T.; Pritschow, G.; Ulsoy, G.; Van Brussel, H. (1999). "Reconfigurable Manufacturing Systems". CIRP Annals. 48 (2): 527–540. doi:10.1016/S0007-8506(07)63232-6. Retrieved 7 December 2021.
  32. ^ Zhang, Yingfeng; Tao, Fei (2016-10-21). Optimization of Manufacturing Systems Using the Internet of Things. Academic Press. ISBN 978-0-12-809911-7.
  33. ^ Dashchenko, Anatoli I. (Jun 8, 2007). Reconfigurable manufacturing systems and transformable factories. Berlin: Springer. pp. 80–82. ISBN 9783540293972. Retrieved 7 December 2021.
  34. ^ Sikhwal, Ravi K; Childs, Peter R N (2021). "Towards Mass Individualisation: setting the scope and industrial implication". Design Science. 7: e16. doi:10.1017/dsj.2021.18. Retrieved 7 December 2021.
  35. ^ Daronkola, Hassan K.; Tavrou, Soullis (2014). "Design and Manufacture of Personalized Products". Managing Co-Creation and Personalization in Central Europe (PDF). Managing Co-Creation and Personalization in Central Europe. pp. 93–99. Retrieved 7 December 2021.
  36. ^ "Koren to receive Outstanding Investigator Award". UM ME News.
  37. ^ "M. Eugene Merchant Manufacturing Medal of ASME/SME". ASME Website.
  38. ^ "Yoram and Alina Koren Conference Room Dedicated" (PDF). Mechanical Engineering - University of Michigan Annual Report 2012-2013.
  39. ^ "SME Honorary Members". SME Website.
  40. ^ "Elder guardianship: A well-oiled machine". HeraldTribune.com.
Retrieved from ""