Check Point VPN-1

This article has multiple issues. Please help or discuss these issues on the talk page. (Learn how and when to remove these template messages) A major contributor to this article appears to have a close connection with its subject. It may require cleanup to comply with Wikipedia's content policies, particularly neutral point of view. Please discuss further on the talk page. (October 2016) (Learn how and when to remove this template message) This article may rely excessively on sources too closely associated with the subject, potentially preventing the article from being verifiable and neutral. Please help by replacing them with more appropriate citations to reliable, independent, third-party sources. (October 2016) (Learn how and when to remove this template message) This article relies too much on references to primary sources. Please improve this by adding secondary or tertiary sources. (October 2016) (Learn how and when to remove this template message) The topic of this article may not meet Wikipedia's general notability guideline. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources:  –  ·  ·  · scholar · JSTOR (January 2018) (Learn how and when to remove this template message) (Learn how and when to remove this template message)

VPN-1 is a firewall and VPN product developed by Check Point Software Technologies Ltd.

VPN-1 is a stateful firewall which also filters traffic by inspecting the application layer. It was the first commercially available software firewall to use stateful inspection. Later (1997), Check Point registered U.S. Patent # 5,606,668 on their security technology that, among other features, included stateful inspection.^[1] VPN-1 functionality is currently bundled within all the Check Point's perimeter security products. The product, previously known as FireWall-1, is now sold as an integrated firewall and VPN solution.

Platforms[]

The VPN-1 software is installed on a separate operating system, which provides the protocol stack, file system, process scheduling and other features needed by the product. This is different from most other commercial firewall products like Cisco PIX and Juniper firewalls where the firewall software is part of a proprietary operating system.

Although traditionally sold as software only, VPN-1 is also sold in appliance form as Check Point's UTM-1 (starting 2006) and Power-1 appliances. These appliances run the operating system.

As of version R70, VPN-1 supports the following operating systems:

• Windows Server 2003 and 2008;
• Red Hat Enterprise Linux (RHEL);
• Check Point (a Check Point Linux distribution based on Red Hat Enterprise Linux, often called SPLAT);
• Nokia IPSO;
• Check Point (a Check Point Linux distribution, unifying IPSO and SecurePlatform into a single operating system);
• Crossbeam XOS and COS

Previous versions of Check Point firewall supported other operating systems including Solaris, HP-UX and AIX. See the table in the Version History section below for details.

VPN-1 running on the Nokia platform on IPSO is often called a Nokia Firewall as if it were a different product, but in fact it runs the same VPN-1 software as other platforms.

Upon completing the acquisition of Nokia Security Appliance Business in 2009, Checkpoint started the project named Gaia aimed at merging two different operating systems—SecurePlatform and IPSO—into one. This new OS is positioned to finally replace both existing operating systems at some point in the future.^[2] On April 17, 2012 Check Point announced the general availability of the Gaia operating system as part of the R75.40 release.

Features[]

While started as pure firewall and vpn only product, later more features were added. And while they are licensed separately, they have since began to be bundled in default installations of the VPN-1 as well.

SmartDefense (IPS) This feature adds to the built-in stateful inspection and inherent TCP/IP protocols checks and normalization inspection of most common application protocols. Starting NGX R70 this feature has been rebranded as IPS.
Quality of service (Floodgate-1) Checkpoint implementation of the Quality of service (QOS). It supports bandwidth guaranteeing or limiting per QOS rule or per connection. Also the priority queuing can be done (LLQ). Nevertheless, RFC based QOS implementation, be it Differentiated services or Ip precedence, are not supported
Content Inspection Starting with NGX R65 this new feature has been introduced providing 2 services:

• Antivirus scanning - scanning of the passing traffic for viruses
• Web filtering - limiting access of internal to the firewall hosts to the Web resources using explicit URL specification or category rating.

See also[]

• Check Point
• Check Point Abra

References[]

External links[]

• www.checkpoint.com — Check Point Software Technologies web site
• www.fw-1.de — information about VPN-1
• Check Point Official Forums
• CPUG: The Check Point User Group
• Check Point IPsec IKE Implementation details