Copper(I) sulfate

From Wikipedia, the free encyclopedia
Copper(I) sulfate
Names
Other names
Copper(I) sulphate; Cuprous sulfate; Dicopper sulfate
Identifiers
  • 17599-81-4
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.159.746 Edit this at Wikidata
  • InChI=1S/2Cu.H2O4S/c;;1-5(2,3)4/h;;(H2,1,2,3,4)/q2*+1;/p-2
    Key: WIVXEZIMDUGYRW-UHFFFAOYSA-L
  • InChI=1/2Cu.H2O4S/c;;1-5(2,3)4/h;;(H2,1,2,3,4)/q2*+1;/p-2
    Key: WIVXEZIMDUGYRW-NUQVWONBAI
  • [O-]S(=O)(=O)[O-].[Cu+].[Cu+]
Properties
Cu2SO4
Molar mass 223.15 g mol−1
Appearance White
Density 4.12 g cm−3[1]
Melting point 110 °C
decomposes
Hazards
NIOSH (US health exposure limits):
PEL (Permissible)
TWA 1 mg/m3 (as Cu)[2]
REL (Recommended)
TWA 1 mg/m3 (as Cu)[2]
IDLH (Immediate danger)
TWA 100 mg/m3 (as Cu)[2]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Infobox references

Copper(I) sulfate, also known as cuprous sulfate, is the inorganic compound with the chemical formula Cu2SO4. It is a white solid that has attracted little attention, in contrast to copper(II) sulfate. It is an unusual example of a copper(I) compound derived from an oxyanion, illustrated also by the non- or fleeting existence of cuprous nitrate and cuprous perchlorate.[1]

Synthesis[]

Cuprous sulfate is produced by the reaction of copper metal with sulfuric acid at 200 °C:[3]

The small amount of water produced in this reaction is absorbed by the sulfuric acid.

Cu2SO4 can also be synthesized by the action of dimethyl sulfate on cuprous oxide:[4]

The material is stable in dry air at room temperature but decomposes rapidly in presence of moisture or on heating. It disproportionates upon contact with water:[4]

It can also be produced by the reaction of copper(II) sulfate and a reducing agent such as sodium thiosulfate.

Structure[]

Cu2SO4 crystallizes in the orthorhombic space group. The Cu-O distances are 196 pm.[1]

References[]

  1. ^ a b c Berthold, H. J.; Born, J.; Wartchow, R. (1988). "The crystal structure of copper(I)sulfate Cu2SO4 – The first structure of a simple cuprous oxo-salt". Z. Kristallogr. Cryst. Mater. 183: 309–318. doi:10.1524/zkri.1988.183.14.309. S2CID 101673081.
  2. ^ a b c NIOSH Pocket Guide to Chemical Hazards. "#0150". National Institute for Occupational Safety and Health (NIOSH).
  3. ^ O. Glemser; R. Sauer (1963). "Copper (I) Sulfate". In G. Brauer (ed.). Handbook of Preparative Inorganic Chemistry, 2nd Ed. 2pages=1020. NY,NY: Academic Press.
  4. ^ a b Vo Van, Kim; Habashi, Faith (1972). "Identification and Thermal Stability of Copper(I) Sulfate". Can. J. Chem. 50 (23): 3872–3875. doi:10.1139/v72-610.
Retrieved from ""