Energy Multiplier Module
![]() | This article contains content that is written like an advertisement. (April 2012) |
The Energy Multiplier Module (EM² or EM squared) is a nuclear fission power reactor under development by General Atomics.[1] It is a fast-neutron version of the Gas Turbine Modular Helium Reactor (GT-MHR) and is capable of converting spent nuclear fuel into electricity and industrial process heat.[2]
Design specifications[]
EM2 is an advanced modular reactor expected to produce 265 MWe (500 MWth) of power with evaporative cooling (240 MWe with dry cooling) at a core outlet temperature of 850 °C (1,600 °F). The reactor will be fully enclosed in an underground containment structure for 30 years without requiring refueling.[3] EM2 differs from current reactors in that it does not use water coolant but is instead a gas-cooled fast reactor, which uses helium as a coolant for an additional level of safety. The reactor uses a composite of silicon carbide as a fuel cladding material, and zirconium silicide as neutron reflector material. The reactor unit is coupled to a direct-drive helium gas turbine which in turn drives a generator for the production of electricity.
The nuclear core design is based upon a new conversion technique in which an initial "starter" section of the core provides the neutrons to convert fertile material (used nuclear fuel, thorium or depleted uranium) into burnable fissile fuel.[4] First generation EM2 units use enriched uranium starters (approximately 15 percent U235) to initiate the conversion process.[5] The starter U235 is consumed as the fertile material is converted to fissile fuel. The core life expectancy is approximately 30 years without refueling or reshuffling the fuel.
Substantial amounts of usable fissile material remain in the EM2 core at the end of life. This material can be reused as the starter for a second generation of EM2s, without conventional reprocessing.[6] There is no separation of individual heavy metals required and no additional enriched uranium needed. Only fission products would be removed, which would decay to near-background radiation levels in about 500 years compared to conventional spent fuel, which requires about 10,000 years.[7]
All EM2 heavy metal discharges could be recycled into new EM2 units, effectively closing the nuclear fuel cycle, which minimizes nuclear proliferation risks and the need for long-term repositories to secure nuclear materials.
Economics and workforce capacity[]
EM2 power costs are expected to be lower due to high power conversion efficiency, a reduced number of components, and long core life. EM2 is expected to achieve a conversion efficiency of above 50% due to its high core outlet temperature and closed Brayton power cycle. The Brayton cycle eliminates many expensive components, including steam generators, pressurizers, condensers, and feedwater pumps. The design would utilize only 1/6th of the nuclear concrete of a conventional light water reactor.[8]
Each module can be manufactured in either U.S. domestic or foreign facilities using replacement parts manufacturing and supply chain management with large components shipped by commercial truck or rail to a site for final assembly, where it will be fully enclosed in an underground containment structure. Dry cooling capability allows siting in locations without a source of cooling water.
Nuclear waste[]
EM2 can burn used nuclear fuel, also referred to as "spent fuel" from current light water reactors. It can utilize an estimated 97% of unused fuel that current reactors leave behind as waste.
Spent fuel rods from conventional nuclear reactors are put into storage and considered to be nuclear waste, by the nuclear industry and the general public.[9] Nuclear waste from light water reactors retains more than 95% of its original energy because such reactors cannot burn fertile U238, while fast reactors can. The current U.S. inventory of spent fuel is equivalent to nine trillion barrels of oil - four times more than the known reserves.
Non-proliferation[]
By using spent nuclear waste and depleted uranium stockpiles as its fuel source, a large-scale deployment of the EM2 could reduce the long-term need for uranium enrichment and eliminate conventional nuclear reprocessing, which requires plutonium separation.[10]
Conventional light water reactors require refueling every 18 months. EM2's 30-year fuel cycle minimizes the need for fuel handling and reduces access to fuel material, thus reducing proliferation concerns.
Nuclear safety and security[]
EM2 utilizes passive safety systems designed to safely shutdown the reactor in emergency conditions using only gravity and natural convection.[11] Control rods are automatically inserted during a loss-of-power incident via gravity. Natural convection flow is used to cool the core during whole site loss of power incidents. No external water supply is necessary for emergency cooling. The use of silicon carbide as fuel cladding in the core ensures no hydrogen production during accident scenarios and allows an extended period of response when compared to Zircaloy metal cladding used in current reactors.
Underground siting improves safety and security of the plant against terrorism and other threats.
EM2's high operating temperature can provide process heat for petrochemical fuel products and alternative fuels, such as biofuels and hydrogen.[12]
See also[]
- American Association for the Advancement of Science
- Nuclear Energy Institute
- Nuclear power
- Nuclear safety in the United States
- Economics of new nuclear power plants
- United States Department of Energy
References[]
- ^ Logan Jenkins (10 January 2013). "JENKINS: Hot young prospect to replace old San Onofre reactors". San Diego Union Tribune. Retrieved 19 January 2013.
- ^ Freeman, Mike (Feb 24, 2010). "Company has plan for small reactors". San Diego Union Tribune.
- ^ "Advanced Reactors". General Atomics. Retrieved Feb 19, 2018.
- ^ "With Disposal Uncertain, Waste Burning Reactors Gain Traction – EM2 to Burn LWR Fuel," Nuclear New Build Monitor, March 15, 2010
- ^ Choi, H. (2013). "A Compact Gas-Cooled Fast Reactor with an Ultra-Long Fuel Cycle". Science and Technology of Nuclear Installations. 2013: 1–10. doi:10.1155/2013/618707.
- ^ "Advanced Reactors". General Atomics. Retrieved Feb 19, 2018.
- ^ Choi, H. (2013). "A Compact Gas-Cooled Fast Reactor with an Ultra-Long Fuel Cycle". Science and Technology of Nuclear Installations. 2013: 1–10. doi:10.1155/2013/618707.
- ^ Smith, Rebecca (Feb 22, 2010). "General Atomics Proposes a Plant That Runs on Nuclear Waste". The Wall Street Journal.
- ^ Parmentola, John (March 11, 2010). "Letter to the Editor in Response to "Nuclear power – not a green option – it generates radioactive waste; it requires uranium that's dangerous to mine; it's hugely expensive,"". Los Angeles Times.
- ^ Fairley, Peter (May 11, 2010). "7. "Downsizing Nuclear Power Plants – Modular designs rely on 'economies of multiples' to make small reactors pay off big,"". IEEE Spectrum.
- ^ "Advanced Reactors". General Atomics. Retrieved Feb 19, 2018.
- ^ "Small Nuclear Power Reactors". World Nuclear Association. August 2010.
External links[]
- Official website
- 2011-11-28: Presentation about the EM2 reactor at the Department of Nuclear Engineering, University of California-Berkeley, ustream video Previous presentation
- 2015-05: Testimony of the Sr. Vice President of General Atomics before the Committee on Science, Space and Technology: [1]
- Nuclear power reactor types