Quantum noise

This article includes a list of general references, but it remains largely unverified because it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (November 2009) (Learn how and when to remove this template message)

In general, noise is uncontrolled random variation from an expected value and is typically unwanted. General causes are thermal fluctuations, mechanical vibrations, industrial noise, fluctuations of voltage from a power supply, thermal noise due to Brownian motion, instrumentation noise, a laser’s output mode deviating from the desired mode of operation, etc. Quantum noise is observed in a system where conventional sources of noise are suppressed. The dominant noise are due to the discrete nature of the very small (electrons, photocurrent, etc.), arises from the uncertainty principle, and Zero-point energy fluctuations. Quantified noise is similar to classical noise theory and will not always return an asymmetric spectral density. ^[1]

Quantum noise has been called shot noise by J. Verdeyen ^[2] which is related to the statistics of photon counting, the discrete nature of electrons, and intrinsic noise generation in electronics. In contrast to shot noise, the quantum mechanical uncertainty principle sets a lower limit to a measurement. The uncertainty principle requires any amplifier or detector to have noise. ^[1]

A Heisenberg Microscope[]

We can illustrate quantum noise by considering a simple Heisenberg Microscope where an atom's position is measured from the scattering of photons. The uncertainty principle is given as,

${\displaystyle \Delta x_{imp}\Delta p_{BA}\gtrsim \hbar }$.

Where the ${\displaystyle \Delta x_{imp}}$ is the uncertainty in an atom's position, and the ${\displaystyle \Delta p_{BA}}$ is the uncertainty of the momentum or sometimes called the (momentum transferred to the atom) when near the quantum limit. We can increase the precision of the position measurement at the expense of knowing the atom’s momentum. When the position is precisely known enough backaction begins to affect our measurement in two ways. First, yt will impart mometum back onto our measuring devices in extreme cases. Secondly, we have decreasing future knowledge of the atom’s future position. Precise and sensitive instrumentation will approach the uncertainty principle at sufficiently control environments.

Basics of Noise Theory[]

Noise is of practical concern for precision engineering and engineered systems approaching the standard quantum limit. Typical engineered consideration of quantum noise is for quantum nondemolition measurement and quantum point contact. So quantifying noise is useful. ^{[2] [3] [4]} A signal's noise is quantified as the fourier transform of its autocorrelation. The autocorrelation of a signal is given as,

${\displaystyle G_{vv}(t-t')=\langle V(t)V(t')\rangle }$

which measures when our signal is positively, negatively or not correlated at different times ${\displaystyle t}$ and ${\displaystyle t'}$. The time average, ${\displaystyle \langle V(t)\rangle }$, is zero and our ${\displaystyle V(t)}$ is a voltage signal. Its fourier transform is,

${\displaystyle V(\omega )={\frac {1}{\sqrt {T}}}\int _{0}^{T}V(t)e^{i\omega t}dt}$

because we measure a voltage over a finite time window. The Wiener–Khinchin theorem generally states that a noise's power spectrum is given as the autocorrelation of a signal, i.e.,

${\displaystyle S_{vv}(\omega )=\int _{-\infty }^{+\infty }e^{i\omega t}G_{vv}dt=\int _{-\infty }^{+\infty }e^{i\omega t}\langle |V(\omega )|^{2}\rangle dt}$

The above relation is sometimes called the power spectrum or spectral density. In the above outline, we assumed that

• Our noise is stationary or the probability does not change over time. Only the time difference matters.
• Noise is due to a very large number of fluctuating charge so that the central limit theorem applie, i.e., the noise is Gaussian or normally distributed.
• ${\displaystyle G_{vv}}$ decays to zero rapidly over some time ${\displaystyle \tau _{c}}$.
• We sample over a sufficiently large time, ${\displaystyle T}$, that our integral scales as a random walk ${\displaystyle {\sqrt {T}}}$. So our ${\displaystyle V(\omega )}$ is independent of measured time for ${\displaystyle T>>\tau _{c}}$.
  • Said in another way, ${\displaystyle G_{vv}(t-t')\to 0}$ as ${\displaystyle |t-t'|>>\tau _{c}}$.

One can show that an ideal “top-hat” signal, which may correspond to a finite measurement of a voltage over some time, will produce noise across its entire spectrum as a sinc function. Even in the classical case, noise is produced.

Classical to Quantum Noise

To study quantum noise, one replaces the corresponding classical measurements with quantum operators, e.g.,

${\displaystyle S_{xx}(\omega )=\int _{-\infty }^{+\infty }e^{i\omega t}\langle {\hat {x}}(t){\hat {x}}(0)\rangle dt}$

where ${\displaystyle \langle \rangle }$ are the quantum statistical average using the density matrix in the Heisenberg picture.

Quantum noise and the uncertainty principle[]

The Heisenberg uncertainty implies noise.^[5] An operator with a hermitian conjugate follows the relationship, ${\displaystyle AA^{\dagger }\geq 0}$. Define ${\displaystyle A}$ as ${\displaystyle A=\delta x+\lambda e^{i\theta }\delta y}$ where ${\displaystyle \lambda }$ is real. The ${\displaystyle x}$ and ${\displaystyle y}$ are the quantum operators. We can show the following,

${\displaystyle \langle \delta x^{2}\rangle \langle \delta y^{2}\rangle \geq {\frac {1}{4}}|\langle [\delta x,\delta y]\rangle |^{2}+|\langle [\delta x,\delta y]_{+}\rangle |^{2}}$

Where the ${\displaystyle \langle \rangle }$ are the averages over the wavefunction and other statistical properties. The left terms are the uncertainty in ${\displaystyle x}$ and ${\displaystyle y}$, the second term on the right is to covariance or ${\displaystyle \langle \delta x\delta y+\delta y\delta x\rangle }$ which arises from coupling to an external source or quantum effects. The first term on the right corresponds to the Commutator relation and would cancel out if the x and y commuted. That is the origin of our quantum noise.

It is demonstrative to let ${\displaystyle x}$ and ${\displaystyle y}$ correspond to position and momentum that meets the well known commutator relation, ${\displaystyle [x,p]=i\hbar }$. Then our new expression is,

${\displaystyle \Delta x\Delta y\geq {\sqrt {{\frac {1}{4}}\hbar ^{2}+\sigma _{xy}^{2}}}}$

Where the ${\displaystyle \sigma _{xy}}$ is the correlation. If the second term on the right vanishes, then we recover the Heisenberg uncertainty principle.

Quantum Noise: harmonic motion and weakly coupled heat bath[]

Consider the motion of a simple harmonic oscillator with mass, ${\displaystyle M}$, and frequency, ${\displaystyle \Omega }$, coupled to some heat bath which keeps the system in equilibrium. The equations of motion are given as,

${\displaystyle x(t)=x(0)\cos(\Omega t)+p(0){\frac {1}{M\Omega }}\sin(\Omega t)}$

The quantum autocorrelation is then,

${\displaystyle G_{xx}=\langle {\hat {x}}(t){\hat {x}}(0)\rangle }$ ${\displaystyle =\langle {\hat {x}}(0){\hat {x}}(0)\rangle \cos(\Omega t)+\langle {\hat {p}}(0){\hat {x}}(0)\rangle \sin(\Omega t)}$

Classically, there is no correlation between position and momentum. The uncertainty principle requires the second term to be nonzero. It goes to ${\displaystyle i\hbar /2}$. We can take the equipartition theorem or the fact that in equilibrium the energy is equally shared among a molecule/atoms degrees of freedom in thermal equilibrium , i.e.,

${\displaystyle {\frac {1}{2}}M\Omega ^{2}\langle x^{2}\rangle ={\frac {1}{2}}k_{B}T}$

In the classical autocorrelation, we have

${\displaystyle G_{xx}={\frac {k_{B}T}{M\Omega ^{2}}}\cos(\Omega t)\to S_{xx}(\omega )=\pi {\frac {k_{B}T}{M\Omega ^{2}}}[\delta (\omega -\Omega )+\delta (\omega +\Omega )]}$

while in the quantum autocorrelation we have

${\displaystyle G_{xx}=\left({\frac {\hbar }{2M\Omega }}\right)\{n_{BE}(\hbar \Omega )e^{i\Omega t}+[n_{BE}(\hbar \Omega )+1]e^{-i\Omega t}\}\to S_{xx}(\omega )=2\pi \left({\frac {\hbar }{2M\Omega }}\right)[n_{BE}(\hbar \Omega )\delta (\omega -\Omega )+[n_{BE}(\hbar \Omega )+1]\delta (\omega +\Omega )]}$

Where the fraction terms in ${\displaystyle ()}$ is the zero-point energy uncertainty. The ${\displaystyle n_{BE}}$ is the Bose-Einstien population distribution. Notice that the quantum ${\displaystyle S_{xx}}$ is asymmetric in the due to the imaginary autocorrelation. As we increase to higher temperature that corresponds to taking the limit of ${\displaystyle k_{B}T>>\hbar \Omega }$. One can show that the quantum approaches the classical ${\displaystyle S_{xx}}$. This allows ${\displaystyle n_{BE}\approx n_{BE}+1\approx {\frac {k_{B}T}{\hbar \Omega }}}$

Physical interpretation of spectral density

Typically, the positive frequency of the spectral density corresponds to the flow of energy into the oscillator (for example, the photons' quantized field), while the negative frequency corresponds to the emitted of energy from the oscillator. Physically, an asymmetric spectral density would correspond to either the net flow of energy from or to our oscillator model.

Linear Gain and Quantum uncertainty[]

Most optical communications use amplitude modulation where the quantum noise is predominantly the shot noise. A laser's quantum noise, when not considering shot noise, is the uncertainty of its electric field's amplitude and phase. That uncertainty becomes observable when a quantum amplifier preserves phase. The phase noise becomes important when the energy of the frequency modulation or phase modulation is comparable to the energy of the signal (frequency modulation is more robust than amplitude modulation due to the additive noise intrinsic to amplitude modulation).

Quantum Noise and Linear Amplification[]

An ideal noiseless gain cannot exit. ^[6] Consider the amplification of stream of photons, an ideal linear noiseless gain, and the Energy-Time uncertainty relation.

${\displaystyle \Delta E\Delta t\gtrsim \hbar /2}$

The photons, ignoring the uncertainty in frequency, will have an uncertainty in its overall phase and number, and assume a known frequency, i.e., ${\displaystyle \Delta \phi =2\pi \nu \Delta t}$ and ${\displaystyle \Delta E=h\nu \Delta n}$. We can substitute these relations into our energy-time uncertainty equation to find the number-phase uncertainty relation or the uncertainty in the phase and photon numbers. ${\displaystyle \Delta n\Delta \phi >1/2}$

Let an ideal linear noiseless gain, ${\displaystyle G}$, act on the photon stream. We also assume a unity quantum efficiency, or every photon is converted to a photocurrent. The output will be following with no noise added.

${\displaystyle n_{0}\pm \Delta n_{0}\to Gn_{0}\pm G\Delta n_{0}}$

The phase will be modified too,

${\displaystyle \phi _{0}\pm \Delta \phi _{0}\to \phi _{0}+\theta +\Delta \phi _{0}}$,

Where the ${\displaystyle \theta }$ is the overall accumulated phase as the photons traveled through the gain medium. Substituting our output gain and phase uncertainties, gives us

${\displaystyle \Delta n_{0}\Delta \phi _{0}>1/2G}$.

Our gain is ${\displaystyle G>1}$, which is a contradiction to our uncertainty principles. So a linear noiseless amplifier cannot increase its signal without noise. A deeper analysis done by H. Heffner ^[7] showed the minimum noise power output required to meet the Heisenberg uncertainty principle is given as

${\displaystyle P_{n}=h\nu B(G-1)}$

Where ${\displaystyle B}$ is half of the full width at half max, the ${\displaystyle \nu }$ frequency of the photons, and ${\displaystyle h}$ is plank's constant. The term ${\displaystyle h\nu B_{0}/2}$ with ${\displaystyle B_{0}=2B}$ is sometimes called quantum noise ^[6]

Shot Noise & Instrumentation[]

In precision optics with highly stabilzed lasers and efficient detectors, quantum noise refers to the fluctuations of signal.

The random error of interferometric measurements of position, due to the discrete character of photons measurement, is another quantum noise. The uncertainty of position of a probe in probe microscopy may also attributable to quantum noise; but not the dominant mechanism governing resolution.

In an electric circuit, the random fluctuations of a signal due to the discrete character of electrons can be called quantum noise. ^[8] An experiment by S. Saraf, et .al. ^[9] demonstrated shot noise limited measurements as a demonstration of quantum noise measurements. Generally speaking, they amplified a Nd:YAG free space laser with minimal noise addition as it transitioned from linear to nonlinear amplification. The experiment required Fabry-Perot for filtering laser mode noises and selecting frequencies, two separate but identical probe and saturating beams to ensure uncorrelated beams, a zigzag slab gain medium, and a balanced detector for measuring quantum noise or shot-noise limited noise.

Shot Noise Power

The theory behind noise analysis of photon statistics (sometimes called the forward Kolmogorov equation) starts from the Masters equation from Shimoda et al. ^[10]

${\displaystyle {\frac {dP_{n}}{dx}}=a[nP_{n-1}-(n+1)P_{n}]+b[(n+1)P_{n+1}-nP_{n}]}$

where ${\displaystyle a}$ corresponds to the emission cross section and upper population number product ${\displaystyle \sigma _{e}N_{2}}$, and the ${\displaystyle b}$ is the absorption cross section ${\displaystyle \sigma _{a}N_{1}}$. The above relation is describing the probability of finding ${\displaystyle n}$ photons in radiation mode ${\displaystyle |n\rangle }$. The dynamic only considers neighboring modes ${\displaystyle |n+1\rangle }$ and ${\displaystyle |n-1\rangle }$ as the photons travel through a medium of excited and ground state atoms from position ${\displaystyle x}$ to ${\displaystyle x+dx}$. This gives us a total of 4 photon transitions associated to one photon energy level. Two photon number adding to the field and leaving an atom, ${\displaystyle |n-1\rangle \to |n\rangle }$ and ${\displaystyle |n\rangle \to |n+1\rangle }$ and two photons leaving a field to the atom ${\displaystyle |n+1\rangle \to |n\rangle }$ and ${\displaystyle |n\rangle \to |n-1\rangle }$. Its noise power is given as,

${\displaystyle P_{d}^{2}=P_{shot}^{2}[1+2f_{sp}\eta (G-1)]}$

Where,

• ${\displaystyle P_{d}}$ is the power at the detector,
• ${\displaystyle P_{shot}}$ is the power limited shot noise,
• ${\displaystyle G}$ the unsaturated gain and is also true for saturated gain,
• ${\displaystyle \eta }$ is the efficiency factor. That is the product of transmission window efficiency to our photodetector, and quantum efficiency.
• ${\displaystyle f_{sp}}$ is the spontaneous emission factor that typically corresponds relative strength of spontaneous emission to stimulated emission. A value of unity would mean all doped ions are in the excited state. ^[11]

Sarif, et al demonstrated quantum noise or shot noise limited measurements over a wide range of power gain that agreeded with theory.

Zero Point Fluctuations[]

Zero-Point energy fluctuations is a well know results from undergraduate textbook. ^[12] Generally speaking, at the lowest energy excitation of a quantized field that permeates all space, we will have some energy variance over some time. This accounts for vacuum fluctuations that permeates all space.

This vacuum fluctuation or quantum noise will effect classical systems. This manifest as quantum decoherence in an entangled system, normally attributed to thermal differences in the conditions surrounding each entangled particle.^{[clarification needed]} Because entanglement is studied intensely in simple pairs of entangled photons, for example, decoherence observed in experiments could well be synonymous with "quantum noise" as to the source of the decoherence. Vacuum fluctuation is a possible causes for a quanta of energy to spontaneously appear in a given field or spacetime, then thermal differences must be associated with this event. Hence, it would cause decoherence in an entangled system in proximity of the event.^{[dubious – discuss]}

Coherent states and noise of a quantum amplifier[]

A laser is described by the coherent state of light, or the superposition of harmonic oscillators eigenstates. Erwin Schrodinger first derived the coherent state for the Schrodinger equation to meet the correspondence principle in 1926. ^[12]

The laser is a quantum mechanical phenomena (see Maxwell–Bloch equations, Rotating wave approximation, and semi-classical model of a two level atom). The Einstein coefficients and the laser rate equations are adequate if one is interested in the population levels and one does not need to account for population quantum coherences (the off diagonal terms in a density matrix). Photons of the order of 10⁸ corresponds to a moderate energy. The relative error of measurement of the intensity due to the quantum noise is on the order of 10⁻⁵. This is considered to be of good precision for most of applications.

Quantum amplifier

A quantum amplifier is an amplifier which operates close to the quantum limit. Quantum noise becomes important when a small signal is amplified. A small signal's quantum uncertainties in its quadrature are also amplified; this sets a lower limit to the amplifier. A quantum amplifier's noise is its output amplitude and phase. Generally, a laser is amplified across a spread of wavelengths around a central wavelength, some mode distribution, and polarization spread. But one can consider a single mode amplification and generalize to many different modes. A phase-invariant amplifier preserves the phase of the input gain without drastic changes to the output phase mode. ^[13]

Quantum amplification can be represented with a unitary operator, ${\displaystyle A_{out}=U^{\dagger }A_{in}U}$ , as stated in D. Kouznetsov 1995 paper.

See also[]

• Quantum error correction
• Quantum optics
• Quantum limit
• Shot noise
• Quantum harmonic oscillator

References[]

Further reading[]

• Clerk, Aashish A. Quantum Noise and quantum measurement. Oxford University Press.
• Clerk, Aashish A., et al. Introduction to Quantum Noise, measurement, and amplification,Reviews of Modern Physics 82, 1155-1208.
• Gardiner, C. W. and Zoller, P. Quantum Noise: A Handbook of Markovian and Non-Markovian Quantum Stochastic Methods with Applications to Quantum Optics, Springer, 2004, 978-3540223016

Sources[]

• C. W. Gardiner and Peter Zoller, Quantum Noise: A Handbook of Markovian and Non-Markovian Quantum Stochastic Methods with Applications to Quantum Optics, Springer-Verlag (1991, 2000, 2004).