Bolte Bridge

From Wikipedia, the free encyclopedia

Bolte Bridge
Bolte Bridge, Melbourne 2017-10-28.jpg
The Bolte Bridge from the Melbourne Docklands.
Coordinates37°49′10.12″S 144°55′55.65″E / 37.8194778°S 144.9321250°E / -37.8194778; 144.9321250
Carries8 lanes (4 inbound, 4 outbound)
CrossesYarra River
LocaleMelbourne, Australia
Maintained byTransurban
Characteristics
DesignCantilever
Total length5000 metres
Width15.35 metres
Longest span173 metres
Clearance belowApprox 25 metres
History
Opened16 August 1999
Statistics
Daily trafficApprox 50,000
TollA$3.42 (one way)
Location

The Bolte Bridge is a large twin cantilever road bridge in Melbourne, Victoria, Australia. The Bolte Bridge carries a total of eight lanes of traffic – four lanes northbound and four lanes southbound. While officially only 490 metres in length, the actual structure appears much longer as it forms part of a 5 kilometre elevated roadway between Flemington Road and the West Gate Freeway. It spans the Yarra River and Victoria Harbour in the Docklands precinct to the west of the Melbourne CBD. It forms part of the CityLink system of toll roads that connects the Tullamarine Freeway from the northern suburbs with the West Gate Freeway and the Domain and Burnley tunnels to the Monash Freeway and the south eastern suburbs.[1] It is named after Victoria’s 38th and longest-serving Premier, Sir Henry Bolte.

Construction[]

The bridge was designed by architects Denton Corker Marshall and was built for head contractor Transurban by Baulderstone Hornibrook, construction taking three years from 1996 to 1999 and costing $75 million. It was named by Jeff Kennett, for former Premier of Victoria, Sir Henry Bolte because of its linking the West Gate, Monash and Tullamarine Freeways—projects commissioned or completed by the Bolte Government.

It is the largest balanced cantilever cast in situ box girder bridge in Australia. The superstructure is built as two independent bridges of variable depth, prestressed concrete box girders, separated by a 1.15 m clear gap between the structures.

The bridge features two 140 metre [2] high silver (grey concrete) towers, situated on either side of the roadway at the midpoint of the bridge's span. These two towers are an aesthetic addition by the architects, and are not joined to the main body of the bridge.[2] These towers are hollow, and feature access ladders to a small roof top hatch. Until locked and surrounded by water, these towers were a popular target for urban explorers. It has two main spans of 173 metres, two side spans of 72 metres with approach viaducts 430m to the south 4080 metres to the north. The bridge supports eight lanes of automobile traffic. Access is prohibited to cyclists and pedestrians.

Other bridges in Australia of similar construction are the Gateway Bridge, Brisbane and Mooney Mooney Bridge near Gosford, north of Sydney.

Gallery[]

References[]

  1. ^ "Bolte Bridge - History, Named After, Towers & Map, Melbourne". Melbourne Point (Holiday Point). 12 May 2015. Retrieved 22 September 2016.
  2. ^ a b "Denton Corker Marshall: Bolte Bridge". Archived from the original on 4 March 2017. Retrieved 21 May 2016.

External links[]

Retrieved from ""