Electronic Music Studios

Electronic Music Studios (EMS) is a synthesizer company formed in London in 1969 by Peter Zinovieff, Tristram Cary and David Cockerell. It is now based in Ladock, Cornwall.

Founders[]

The founding partners had wide experience in both electronics and music. Cockerell, who was EMS' main equipment designer in its early years, was an electronics engineer and computer programmer. In the mid-1960s Zinovieff had formed the electronic music group Unit Delta Plus with Delia Derbyshire and Brian Hodgson of the BBC Radiophonic Workshop. Cary was a noted composer and a pioneer in electronic music—he was one of the first people in the UK to work in the musique concrete field and built one of the country's first electronic music studios; he also worked widely in film and TV, composing scores for numerous Ealing Studios and Hammer Films productions, and he is well known for his work on the BBC's Doctor Who, notably on the classic serial The Daleks.

VCS 3[]

Front view of the Synthi (VCS 3) II

• [top left] three main oscillators, noise generator and inputs
• [top right] filter/oscillator, envelope, riverb., ring mod., etc.
• [bottom left] matrix plugboard
• [bottom right] joystick

 (DK1 keyboard not shown)

The company's first commercial synthesiser, the VCS 3, designed by David Cockerell, was introduced in 1969.^[1] It was developed in the basement of Zinovieff's house and was nicknamed "The Putney" after the London suburb where he was living at the time.^[2]

EMS' original aim was to create a versatile monophonic synthesiser that would retail for just £100. While this proved unattainable in practice, the company nevertheless succeeded in manufacturing and selling the VCS3 for just £330, less than its nearest American competitor the Minimoog (which originally retailed for US$1495 when released in 1970) and far cheaper than Moog's modular systems, which cost thousands of dollars. EMS also released the DK1, a velocity sensitive dynamic monophonic keyboard controller for use with VCS3; this included an extra VCO and VCA and retailed for £145. ^[3][4][5] The DK1 was nicknamed "The Cricklewood" after the London suburb where Cockerell lived. EMS used to have a R&D department based over a DIY shop in Cricklewood Lane, Cricklewood, London, so that could have influenced the name of the mechanical keyboard. It is not widely known that EMS electronic equipment was mostly made by another company "Hilton Electronics" based in Wareham, Dorset.^{[citation needed]}

The VCS3 consisted of 3 voltage-controlled oscillators (VCOs), a noise generator, two input amplifiers, ring modulator, voltage-controlled low-pass filter, trapezoid envelope generator, voltage-controlled reverberation, level meter, two output amplifiers thus providing a stereo output, and a joystick providing 'X' and 'Y' modulation control.

Matrix plugboard on Synthi VCS 3 II

A distinctive design feature of the VCS3 (and later EMS systems) was that, rather than using patch cords to route audio and control signals between modules, Cockerell employed a small matrix plugboard (patchboard) into which the user stuck special conductive pins that connected an input (listed on the X-axis of the matrix) to an output (on the Y-axis). This matrix plugboard gave the VCS3 a high degree of inter-connectivity, comparable to that of much larger modular systems, and far greater than similar small synthesisers like the Minimoog. It was also much easier to examine than the tangle of patch cords used to interconnect other modular systems of the day, such as the Moog modular synthesizer and was many times smaller than the cumbersome Moog patch bays, which used patch cord leads capped with 1/4-inch 'phone' jacks.

A live performance version, the , was built later the same year but was never put into production. It comprised two VCS3s side-by-side with a keyboard, mixer and signal processing in front, all in a single wooden cabinet. Although EMS lost track of the instrument in 1983, it survived and in the United States,^[6] until 2019 when musician sold it to the Goldsmiths College, University of London Electronic Music Studios.^[7]

The company's next project, the Synthi KB1 (1970), designed by Cockerell, also never went into production. It featured the same synthesis modules as the VCS3, but housed in a horizontal box casing, with a 29-note mini-keyboard controller and two small built in speakers. Only one prototype unit was built and this was subsequently sold to the progressive rock group Yes. ^[8]

Synthi 100[]

EMS Synthi 100

EMS moved into direct competition with Moog in 1971 with the development of its first large-scale modular synthesiser, the "Synthi 100", which originally retailed for £6,500. This unit was first known as the "Digitana" another was later dubbed "The Delaware", after Delaware Rd, Maida Vale, the location of the BBC Radiophonic Workshop. Mounted in a free-standing console cabinet, the Synthi 100 was the third development level of the original VCS3, being in essence 28 VCS3 units by circuit board count. It was driven by twelve VCOs and eight VCF oscillators. Featured a built-in oscilloscope, two 60 x 60 patchbays, two joystick controllers, dual five-octave velocity-sensitive keyboard controllers and a 10,000 clock event with 6x6bit D/A outputs. e.g. 256 duophonic events (512 CV events) digital sequencer. About 30 units were built by EMS, and these enjoyed wide use in the 1970s and beyond; one model was sold to the BBC Radiophonic Workshop and was used extensively on BBC productions including Doctor Who, Blake's 7 and the original radio version of The Hitchhikers' Guide to the Galaxy. The sequencer module of the Synthi 100 was also made available as a separate unit, the , which originally sold for £1,100.^[9]

Synthi A / Synthi AK / Synthi AKS[]

A later-model, Synthi AKS equips built-in KS Sequencer with capacitive keyboard

The prototype "Portabella" Synthi A with built-in speakers

Synthi A with DK series keyboard ^[4][5]

In 1971 EMS released a portable version of the VCS3, the EMS Synthi A, originally called the "Portabella", a pun on London's Portobello Road. Built into a compact attaché case, this unit was even cheaper than the original VCS3 and retailed for just £198. The following year EMS released an expanded version, the Synthi AKS, which retailed for £420 and featured a sequencer and a small keyboard built into the lid. The first 30 AK units featured a black and silver touch pad, a Spin-and-touch random note selector and a resistive touch-sensitive keyboard; these original keyboards proved difficult to use, so they were subsequently replaced with blue capacitive touch-sensitive keyboard with integrated sequencer, and became known as the KS version.^[10]

The Synthi AKS proved very popular and AKS units owned by Eno, Pink Floyd and Jean-Michel Jarre featured prominently in music by these artists in the early 1970s; one of the best-known appearances of an AKS on record is the track "On the Run" from Pink Floyd's The Dark Side of the Moon (1973), and it can be seen being used by Roger Waters and David Gilmour during the recording of the album in footage included in the 1st Director's Cut of Live at Pompeii and in the DSOTM episode of the BBC documentary series Classic Albums, respectively (Gilmour used his to demonstrate the sequence used in the song).

EMS synthesisers in music and the media[]

Dick Mills, BBC Radiophonic Workshop at the Roundhouse

EMS synthesisers and their London studios were used by many prominent rock and electronic artists including Pink Floyd (Meddle, Obscured by Clouds, Dark Side of the Moon, Wish You Were Here, Animals, The Wall), The Who (Won't Get Fooled Again), BBC Radiophonic Workshop, Brian Eno and Roxy Music, Tangerine Dream (all early albums), Hawkwind, Tim Blake, Jean Michel Jarre and Kraftwerk and David Vorhaus (White Noise 2). As noted above, the Synthi 100 "Delaware" owned by the Radiophonic Workshop was used extensively for BBC radio and television productions in the 1970s.

EMS Synthi Hi-Fli (1973), one of the earliest analog multi effect processors

The Groundhogs' Tony McPhee using the Synthi Hi-Fli live in 1974

David Gilmour's 'EMS Synthi Hi-Fli' (aka 'The Sound Freak'), purchased 1972, used on The Dark Side of the Moon

The analog multi effect processor was used extensively by Tony TS Mcphee of The Groundhogs and was used on the album SOLID in 1974. Footage exists of them live at the Marquee Club in London and it is clearly visible on its stand on stage. This footage was broadcast on The Old Grey Whistle Test in 1974.^[11]

In late 2010 Zinovieff put his original Synthi A synthesiser (serial number 4016) up for sale. This instrument, which he believes was the one featured in the "Every Picnic Needs a Synthi" press advertisement,^[12] was fully restored by Robin Wood at EMS.^[13]

EMS equipment can be seen in the 1978 British horror film The Shout starring Alan Bates, John Hurt and Susannah York, the equipment featured includes a , a and a VCS3, the film is available on DVD (Network 79527630), the equipment was loaned to "The Rank Organisation" by Dartington College in Devon, and the featured Synthi Sequencer 256 was recently sold on the "Vintage Electronic Musical Instrument Auction" VEMIA ^[14] website in April 2011.

Timeline of major products[]

EMS Synthi Sequencer 256 (1971) closed view of panel

EMS Synthi-E synthesizer (1975)

• 1969 - EMS VCS 3
• 1971 - EMS Synthi A
• 1971 -
• 1971 - EMS Synthi 100
• 1971 - (digital sequencer) ^[15]
• 1972 - EMS Synthi AKS
• 1973 - (multi-effect) ^[16]
• 1974 - EMS Spectron (video synthesizer, formerly Spectre) ^[17][18]
• 1975 - EMS Synthi E ^[19]
• 1976 - ^[20]
• 1977 - ^[21]
• 1978 - (polyphonic synthesizer) ^[22]

References[]

Bibliography[]

• Hinton, Graham (2002-12-27). "EMS: The Inside Story". Cornwall: Electronic Music Studios. Archived from the original on 2013-05-21.
  Inside story about the beginnings of EMS, studios, non-commercial equipment, people and users.
• Hinton, Graham (2001-06-17). "A Guide to the EMS Product Range - 1969 to 1979". Cornwall: Electronic Music Studios. Archived from the original on 2013-10-31.
• "MUSYS". musicainformatica.org / musicainformatica.it. 2014-05-16. [figure 2] A summary that shows the position of the two PDP computers within the MUSYS system, and all the devices connected to them.
• Cockerell, David (2013-10-01). "Interview - David Cockerell". on "These Hopeful Machines". as a corner of radio program "Sound Lounge". Radio New Zealand. Missing or empty |url= (help)
  "[Q] ...Chronometer [3], as I understand it, the sounds of the clock mechanisms and all the rest of it were effectively sampled by an ADC, stored and manipulated by the computer and then spat out again. What was the breakthrough ... [A] Peter kept buying the latest computers that came out and of course the memory increased. Then I built him a hard disc recorder so that one could store some of the sounds on this hard disc. ..."

Footnotes[]

Further reading[]

• Trevor Pinch; Frank Trocco (2004). Analog Days. Harvard University Press, 2004, 368pp. ISBN 0-674-01617-3. (Chapter 14 details EMS.)
• "All About EMS: Part 1". Sound on Sound (November 2000).
• "All About EMS: Part 2". Sound on Sound (December 2000). Archived from the original on 2011-09-08.
• Mark Vail (2000). Vintage Synthesizers (2nd ed.). Backbeat Books, 2000, 339pp. ISBN 978-0-87930-603-8. (Pages 110-114 British Modular Systems).
• Peter Forrest (1998). The A-Z of Analogue Synthesisers. Part One A-M (revised 2nd ed.). Susurreal, Oct 1998, 320pp. ISBN 0-9524377-2-4. (Pages 111-126 EMS).

External links[]

Wikimedia Commons has media related to Electronic Music Studios (London) Ltd..

• "Electronic Music Studios (London) Ltd".
• "EMS Rehberg".
• "info on EMS VCS3/AKS etc". Archived from the original on 2014-04-19.
• Dr. Peter Zinovieff. "7 Deadly Synths". Lecture for the Red Bull Music Academy, London 2010.
• David Cockerell Interview NAMM Oral History Library (2008)