Iron group
In chemistry and physics, the iron group refers to elements that are in some way related to iron; mostly in period (row) 4 of the periodic table. The term has different meanings in different contexts.
In chemistry, the term is largely obsolete, but it often means iron, cobalt, and nickel, also called the iron triad;[1] or, sometimes, other elements that resemble iron in some chemical aspects.
In astrophysics and nuclear physics, the term is still quite common, and it typically means those three plus chromium and manganese—five elements that are exceptionally abundant, both on Earth and elsewhere in the universe, compared to their neighbors in the periodic table. Titanium and vanadium are also produced in Type 1a supernovae.[2]
General chemistry[]
In chemistry, "iron group" used to refer to iron and the next two elements in the periodic table, namely cobalt and nickel. These three comprised the "iron triad".[1] They are the top elements of groups 8, 9, and 10 of the periodic table; or the top row of "group VIII" in the old (pre-1990) IUPAC system, or of "group VIIIB" in the CAS system.[3] These three metals (and the three of the platinum group, immediately below them) were set aside from the other elements because they have obvious similarities in their chemistry, but are not obviously related to any of the other groups.
The similarities in chemistry were noted as one of Döbereiner's triads and by Adolph Strecker in 1859.[4] Indeed, Newlands' "octaves" (1865) were harshly criticized for separating iron from cobalt and nickel.[5] Mendeleev stressed that groups of "chemically analogous elements" could have similar atomic weights as well as atomic weights which increase by equal increments, both in his original 1869 paper[6] and his 1889 Faraday Lecture.[7]
Analytical chemistry[]
In the traditional methods of qualitative inorganic analysis, the iron group consists of those cations which
- have soluble chlorides; and
- are not precipitated as sulfides by hydrogen sulfide in acidic conditions;
- are precipitated as hydroxides at around pH 10 (or less) in the presence of ammonia.
The main cations in the iron group are iron itself (Fe2+ and Fe3+), aluminium (Al3+) and chromium (Cr3+).[8] If manganese is present in the sample, a small amount of hydrated manganese dioxide is often precipitated with the iron group hydroxides.[8] Less common cations which are precipitated with the iron group include beryllium, titanium, zirconium, vanadium, uranium, thorium and cerium.[9]
Astrophysics[]
The iron group in astrophysics is the group of elements from chromium to nickel, which are substantially more abundant in the universe than those that come after them – or immediately before them – in order of atomic number.[10] The study of the abundances of iron group elements relative to other elements in stars and supernovae allows the refinement of models of stellar evolution.
The explanation for this relative abundance can be found in the process of nucleosynthesis in certain stars, specifically those of about 8–11 Solar masses. At the end of their lives, once other fuels have been exhausted, such stars can enter a brief phase of "silicon burning".[11] This involves the sequential addition of helium nuclei 4
2He
(an "alpha process") to the heavier elements present in the star, starting from 28
14Si
:
28
14Si
+ 4
2He
→ 32
16S
32
16S
+ 4
2He
→ 36
18Ar
36
18Ar
+ 4
2He
→ 40
20Ca
40
20Ca
+ 4
2He
→ 44
22Ti
[note 1]44
22Ti
+ 4
2He
→ 48
24Cr
48
24Cr
+ 4
2He
→ 52
26Fe
52
26Fe
+ 4
2He
→ 56
28Ni
All of these nuclear reactions are exothermic: the energy that is released partially offsets the gravitational contraction of the star. However, the series ends at 56
28Ni
, as the next reaction in the series
56
28Ni
+ 4
2He
→ 60
30Zn
is endothermic. With no further source of energy to support itself, the core of the star collapses on itself while the outer regions are blown off in a Type II supernova.[11]
Nickel-56 is unstable with respect to beta decay, and the final stable product of silicon burning is 56
26Fe
.
Nuclide mass[12] | Mass defect[13] | Binding energy per nucleon[14] | |
---|---|---|---|
62 28Ni |
61.9283451(6) u | 0.5700031(6) u | 8.563872(10) MeV |
58 26Fe |
57.9332756(8) u | 0.5331899(8) u | 8.563158(12) MeV |
56 26Fe |
55.9349375(7) u | 0.5141981(7) u | 8.553080(12) MeV |
It is often incorrectly stated that iron-56 is exceptionally common because it is the most stable of all the nuclides.[10] This is not quite true: 62
28Ni
and 58
26Fe
have slightly higher binding energies per nucleon – that is, they are slightly more stable as nuclides – as can be seen from the table on the right.[15] However, there are no rapid nucleosynthetic routes to these nuclides.
In fact, there are several stable nuclides of elements from chromium to nickel around the top of the stability curve, accounting for their relative abundance in the universe. The nuclides which are not on the direct alpha-process pathway are formed by the s-process, the capture of slow neutrons within the star.
See also[]
- Singly ionized iron-group elements
- S-process
- Silicon burning process
- Abundance of the chemical elements
Notes and references[]
Notes[]
- ^ In lighter stars, with less gravitational pressure, the alpha process is much slower and effectively stops at this stage as titanium-44 is unstable with respect to beta decay (t1/2 = 60.0(11) years).
References[]
- ^ a b M. Green, ed. (2002): Organometallic Chemistry, volume 10, page 283. Royal Society of Chemistry; 430 pages, ISBN 9780854043330
- ^ Bravo, E. (2013). "Insights into thermonuclear supernovae from the incomplete Si-burning process". Astronomy & Astrophysics. 550: A24. arXiv:1212.2410. Bibcode:2013A&A...550A..24B. doi:10.1051/0004-6361/201220309.
- ^ Sherwood Taylor, F. (1942), Inorganic and Theoretical Chemistry (6th ed.), London: Heinemann, pp. 151–54, 727–28.
- ^ Strecker, A. (1859), Theorien und Experimente zur Bestimmung der Atomgewichte der Elemente, Braunschweig: Friedrich Vieweg.
- ^ "Proceedings of Societies [Report on the Law of Octaves]", Chemical News, 13: 113, 1866.
- ^ Mendelejeff, D. (1869), "On the Relationship of the Properties of the Elements to their Atomic Weights", Z. Chem., 12: 405–6.
- ^ Mendeléeff, D. (1889), "The Periodic Law of the Chemical Elements", J. Chem. Soc., 55: 634–56, doi:10.1039/ct8895500634.
- ^ a b Vogel, Arthur I. (1954), A Textbook of Macro and Semimicro Qualitative Inorganic Analysis (4th ed.), London: Longman, pp. 260–78, ISBN 0-582-44367-9.
- ^ Vogel, Arthur I. (1954), A Textbook of Macro and Semimicro Qualitative Inorganic Analysis (4th ed.), London: Longman, pp. 592–611, ISBN 0-582-44367-9.
- ^ a b Greenwood, Norman N.; Earnshaw, Alan (1984). Chemistry of the Elements. Oxford: Pergamon Press. pp. 13–16. ISBN 978-0-08-022057-4..
- ^ a b Woosley, Stan; Janka, Thomas (2005), "The Physics of Core-Collapse Supernovae", Nature Physics, 1 (3): 147–54, arXiv:astro-ph/0601261, Bibcode:2005NatPh...1..147W, CiteSeerX 10.1.1.336.2176, doi:10.1038/nphys172, S2CID 118974639.
- ^ Wapstra, A.H.; Audi, G.; Thibault, C. (2003), The AME2003 Atomic Mass Evaluation (Online ed.), National Nuclear Data Center. Based on:
- Wapstra, A.H.; Audi, G.; Thibault, C. (2003), "The AME2003 atomic mass evaluation (I)", Nuclear Physics A, 729: 129–336, Bibcode:2003NuPhA.729..129W, doi:10.1016/j.nuclphysa.2003.11.002
- Audi, G.; Wapstra, A.H.; Thibault, C. (2003), "The AME2003 atomic mass evaluation (II)", Nuclear Physics A, 729: 337–676, Bibcode:2003NuPhA.729..337A, doi:10.1016/j.nuclphysa.2003.11.003
- ^ Particle Data Group (2008), "Review of Particle Physics" (PDF), Phys. Lett. B, 667 (1–5): 1–6, Bibcode:2008PhLB..667....1A, doi:10.1016/j.physletb.2008.07.018, hdl:1854/LU-685594. Data tables.
- ^ Mohr, Peter J.; Taylor, Barry N.; Newell, David B. (2008). "CODATA Recommended Values of the Fundamental Physical Constants: 2006" (PDF). Reviews of Modern Physics. 80 (2): 633–730. arXiv:0801.0028. Bibcode:2008RvMP...80..633M. doi:10.1103/RevModPhys.80.633. Archived from the original (PDF) on 2017-10-01. Direct link to value.
- ^ Fewell, M. P. (1995), "The atomic nuclide with the highest mean binding energy", Am. J. Phys., 63 (7): 653–58, Bibcode:1995AmJPh..63..653F, doi:10.1119/1.17828.
- Sets of chemical elements
- Nucleosynthesis