Iron pentacarbonyl

From Wikipedia, the free encyclopedia
Iron pentacarbonyl
Iron carbonyl
Iron carbonyl
Iron carbonyl sample
Names
IUPAC name
Pentacarbonyliron(0)
Other names
Pentacarbonyl iron
Iron carbonyl
Identifiers
3D model (JSmol)
ChEBI
ChemSpider
ECHA InfoCard 100.033.323 Edit this at Wikidata
RTECS number
  • NO4900000
UNII
UN number 1994
Properties
Fe(CO)5
Molar mass 195.90 g/mol
Appearance straw-yellow to brilliant orange liquid
Odor musty
Density 1.453 g/cm3
Melting point −21.0 °C (−5.8 °F; 252.2 K)
Boiling point 103 °C (217 °F; 376 K)
Insoluble
Solubility Soluble in organic solvents
slightly soluble in alcohol
insoluble in ammonia
Vapor pressure 40 mmHg (30.6 °C)[1]
1.5196 (20 °C)
Structure
D3h
trigonal bipyramidal
trigonal bipyramidal
Dipole moment
0 D
Hazards
Main hazards Very toxic, highly flammable
Safety data sheet ICSC 0168
GHS pictograms GHS02: FlammableGHS06: ToxicGHS08: Health hazard
NFPA 704 (fire diamond)
4
3
1
Flash point −15 °C (5 °F; 258 K)
49 °C (120 °F; 322 K)
Explosive limits 3.7–12.5%
Lethal dose or concentration (LD, LC):
LD50 (median dose)
25 mg/kg (rat, oral)
NIOSH (US health exposure limits):
PEL (Permissible)
none[1]
REL (Recommended)
TWA 0.1 ppm (0.23 mg/m3) ST 0.2 ppm (0.45 mg/m3)[1]
IDLH (Immediate danger)
0.4 ppm[1]
Related compounds
Other cations
Triruthenium dodecacarbonyl
Triosmium dodecacarbonyl
Related iron carbonyls
Diiron nonacarbonyl
Triiron dodecacarbonyl
Related compounds
Dimanganese decacarbonyl
Dicobalt octacarbonyl
Nickel tetracarbonyl
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY  (what is checkY☒N ?)
Infobox references

Iron pentacarbonyl, also known as iron carbonyl, is the compound with formula Fe(CO)5. Under standard conditions Fe(CO)5 is a free-flowing, straw-colored liquid with a pungent odour. Older samples appear darker. This compound is a common precursor to diverse iron compounds, including many that are useful in small scale organic synthesis.[2]

Properties[]

Iron pentacarbonyl is a homoleptic metal carbonyl, where carbon monoxide is the only ligand complexed with a metal. Other examples include octahedral Cr(CO)6 and tetrahedral Ni(CO)4. Most metal carbonyls have 18 valence electrons, and Fe(CO)5 fits this pattern with 8 valence electrons on Fe and five pairs of electrons provided by the CO ligands. Reflecting its symmetrical structure and charge neutrality, Fe(CO)5 is volatile; it is one of the most frequently encountered liquid metal complexes. Fe(CO)5 adopts a trigonal bipyramidal structure with the Fe atom surrounded by five CO ligands: three in equatorial positions and two axially bound. The Fe–C–O linkages are each linear. Iron is dsp3 hybridized in this complex.

Fe(CO)5 exhibits a relatively low rate of interchange between the axial and equatorial CO groups via the Berry mechanism.[3] It is characterized by two intense νCO bands in the IR spectrum at 2034 and 2014 cm−1 (gas phase).[4]

Synthesis and other iron carbonyls[]

Fe(CO)5 is produced by the reaction of fine iron particles with carbon monoxide. The compound was described in a journal by Mond and Langer in 1891 as "a somewhat viscous liquid of a pale-yellow colour."[5] Samples were prepared by treatment of finely divided, oxide-free iron powder with carbon monoxide at room temperature.

Industrial synthesis of the compound requires relatively high temperatures and pressures (e.g. 175 atm at 150 °C)[6] as well as special, chemically resistant equipment (e.g. composed of copper-silver alloys). Preparation of the compound at the laboratory scale avoids these complications by using an iodide intermediate:[6]

  1. FeI2 + 4 CO → Fe(CO)4I2
  2. 5 Fe(CO)4I2 + 10 Cu → 10 CuI + 4 Fe(CO)5 + Fe

Industrial production and use[]

The industrial production of this compound is somewhat similar to the Mond process in that the metal is treated with carbon monoxide to give a volatile gas. In the case of iron pentacarbonyl, the reaction is more sluggish. It is necessary to use iron sponge as the starting material, and harsher reaction conditions of 5–30 MPa of carbon monoxide and 150–200 °C. Similar to the Mond process, sulfur acts as a catalyst. The crude iron pentacarbonyl is purified by distillation. Ullmann's Encyclopedia of Industrial Chemistry reports that there are only three plants manufacturing pentacarbonyliron; BASF in Germany and in Alabama have capacities of 9000 and 1500–2000 tonnes/year respectively.[7]

Most iron pentacarbonyl produced is decomposed on site to give pure carbonyl iron in analogy to carbonyl nickel. Some iron pentacarbonyl is burned to give pure iron oxide. Other uses of pentacarbonyliron are small in comparison.[7]

Reactions[]

Decarbonylation and related CO substitution reactions[]

Irradiation of Fe(CO)5 with UV produces Fe2(CO)9.

Many compounds are derived from Fe(CO)5 by substitution of CO by Lewis bases, L, to give derivatives Fe(CO)5−xLx. Common Lewis bases include isocyanides, tertiary phosphines and arsines, and alkenes. Usually these ligands displace only one or two CO ligands, but certain acceptor ligands such as PF3 and isocyanides can proceed to tetra- and pentasubstitution. These reactions are often induced with a catalyst or light.[8] Illustrative is the synthesis of the bis(triphenylphosphine)iron tricarbonyl complex (Fe(CO)3(P(C6H5)3)2).[9] In addition to the photochemical route, substitution can also induced by NaOH or NaBH4. The catalyst attacks a CO ligand, which labilizes another CO ligand toward substitution. The electrophilicity of Fe(CO)4L is less than that of Fe(CO)5, so the nucleophilic catalyst, disengages and attacks another molecule of Fe(CO)5.

Oxidation and reduction[]

Most metal carbonyls can be halogenated. Thus, treatment of Fe(CO)5 with halogens gives the ferrous halides Fe(CO)4X2 for X = I, Br, Cl. These species, upon heating lose CO to give the ferrous halides, such as iron(II) chloride.

Reduction of Fe(CO)5 with Na gives Na2Fe(CO)4, "tetracarbonylferrate" also called Collman's reagent. The dianion is isoelectronic with Ni(CO)4 but highly nucleophilic.[10]

Acid-base reactions[]

Fe(CO)5 is not readily protonated, but it is attacked by hydroxide. Treatment of Fe(CO)5 with aqueous base produces [HFe(CO)4], via the Metallacarboxylate intermediate. The oxidation of this monoanion gives triiron dodecarbonyl, Fe3(CO)12. Acidification of solutions of [HFe(CO)4] gives iron tetracarbonyl hydride, H2Fe(CO)4, the first metal hydride ever reported.

Diene adducts[]

Dienes react with Fe(CO)5 to give (diene)Fe(CO)3, wherein two CO ligands have been replaced by two olefins. Many dienes undergo this reaction, notably norbornadiene and 1,3-butadiene. One of the more historically significant derivatives is cyclobutadieneiron tricarbonyl (C4H4)Fe(CO)3, where C4H4 is the otherwise unstable cyclobutadiene.[11] Receiving the greatest attention are complexes of the cyclohexadienes, the parent organic 1,4-dienes being available through the Birch reductions. 1,4-Dienes isomerize to the 1,3-dienes upon complexation.[12]

Fe(CO)5 reacts in dicyclopentadiene to form [Fe(C5H5)(CO)2]2, cyclopentadienyliron dicarbonyl dimer. This compound, called "Fp dimer" can be considered a hybrid of ferrocene and Fe(CO)5, although in terms of its reactivity, it resembles neither.

CO substitution reactions[]

Upon UV irradiation Fe(CO)5 absorbs light population and metal-to-CO charge transfer band inducing CO photolysis and generating singlet and triplet coordinatively unsaturated intermediate Fe(CO)4 with high quantum yield. Prolonged irradiation in gas phase may proceed to further CO detach until atomic Fe formation.

Other uses[]

In Europe, iron pentacarbonyl was once used as an anti-knock agent in petrol in place of tetraethyllead. Two more modern alternative fuel additives are ferrocene and methylcyclopentadienyl manganese tricarbonyl. Fe(CO)5 is used in the production of "carbonyl iron", a finely divided form of Fe, a material used in magnetic cores of high-frequency coils for radios and televisions and for manufacture of the active ingredients of some radar absorbent materials (e.g. iron ball paint). It is famous as a chemical precursor for the synthesis of various iron-based nanoparticles.

Iron pentacarbonyl has been found to be a strong flame speed inhibitor in oxygen based flames.[13] A few hundred ppm of iron pentacarbonyl are known to reduce the flame speed of stoichiometric methane–air flame by almost 50%. However due to its toxic nature it has not been used widely as a flame retardant.

Toxicity and hazards[]

Fe(CO)5 is toxic, which is of concern because of its volatility (vapour pressure: 21 millimetres of mercury (2.8 kPa) at 20 °C). If inhaled, iron pentacarbonyl may cause lung irritation, toxic pneumonitis, or pulmonary edema. Like other metal carbonyls, Fe(CO)5 is flammable. It is, however, considerably less toxic than nickel tetracarbonyl.

The National Institute for Occupational Safety and Health has set a recommended exposure limit for iron pentacarbonyl at 0.1 ppm (0.23 mg/m3) over an eight-hour time-weighted average, and a short-term exposure limit at 0.2 ppm (0.45 mg/m3).[14]

References[]

  1. ^ Jump up to: a b c d NIOSH Pocket Guide to Chemical Hazards. "#0345". National Institute for Occupational Safety and Health (NIOSH).
  2. ^ Samson, S.; Stephenson, G. R. (2004). "Pentacarbonyliron". In Paquette, L. (ed.). Encyclopedia of Reagents for Organic Synthesis. New York, NY: J. Wiley & Sons. doi:10.1002/047084289X. hdl:10261/236866.
  3. ^ Brian E. Hanson; Kenton H. Whitmire (1990). "Exchange of axial and equatorial carbonyl groups in pentacoordinate metal carbonyls in the solid state. The variable temperature magic angle spinning carbon-13 NMR spectroscopy of iron pentacarbonyl, [Ph3PNPPh3][HFe(CO)4], and [NEt4][HFe(CO)4]". Journal of the American Chemical Society. 112 (3): 974–977. doi:10.1021/ja00159a011.
  4. ^ Adams, R. D.; Barnard, T. S.; Cortopassi, J. E.; Wu, W.; Li, Z. "Platinum-ruthenium carbonyl cluster complexes" Inorganic Syntheses 1998, volume 32, pp. 280-284. doi:10.1002/9780470132630.ch44
  5. ^ Mond, L.; Langer, C. (1891). "On iron carbonyls". J. Chem. Soc. Trans. 59: 1090–1093. doi:10.1039/CT8915901090.
  6. ^ Jump up to: a b Brauer, Georg (1963). Handbook of Preparative Inorganic Chemistry. 2 (2nd ed.). New York: Academic Press. pp. 1743, 1751. ISBN 9780323161299.
  7. ^ Jump up to: a b Wildermuth, Egon; Stark, Hans; Friedrich, Gabriele; Ebenhöch, Franz Ludwig; Kühborth, Brigitte; Silver, Jack; Rituper, Rafael (2000). "Iron Compounds". Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a14_591.
  8. ^ Therien, M. J.; Trogler, W. C. (1990). "Bis(phosphine) derivatives of Iron Pentacarbonyl and Tetracarbonyl(tri-tert-butylphosphine)iron(0)". Inorg. Synth. 28: 173–9. doi:10.1002/9780470132593.ch45.
  9. ^ Keiter, R. L.; Keiter, E. A.; Boecker, C. A.; Miller, D. R.; Hecker, K. H. (1997). Tricarbonylbis(phosphine)iron(0) Complexes. Inorg. Synth. 31. pp. 210–214. doi:10.1002/9780470132623.ch31.
  10. ^ Finke, R. G.; Sorrell, T. N. "Nucleophilic Acylation with Disodium Tetracarbonylferrate: Methyl 7-Oxoheptanoate and Methyl 7-oxooctonoate". Organic Syntheses.; Collective Volume, 6, p. 807
  11. ^ Pettit, R.; Henery, J. "Cyclobutadieneiron Tricarbonyl". Organic Syntheses.; Collective Volume, 6, p. 310
  12. ^ Birch, A. J.; Chamberlain, K. B. "Tricarbonyl[(2,3,4,5-η)-2,4-Cyclohexadien-1-one]iron and Tricarbonyl[(1,2,3,4,5-η)-2-Methoxy-2,4-Cyclohexadien-1-yl]Iron(1+) Hexafluorophosphate(1−) from Anisole". Organic Syntheses.; Collective Volume, 6, p. 996
  13. ^ Lask, G.; Wagner, H. Gg. (1962). "Influence of additives on the velocity of laminar flames". Eighth International Symposium on Combustion: 432–438.
  14. ^ "Iron pentacarbonyl (as Fe)". NIOSH Pocket Guide to Chemical Hazards. Centers for Disease Control and Prevention. April 4, 2011. Retrieved November 19, 2013.
Retrieved from ""