List of EDA companies

From Wikipedia, the free encyclopedia

A list of notable electronic design automation (EDA) companies.

Existing companies[]

Software companies[]

Company EDA products
Aldec
  • Active-HDL
  • HES-DVM
  • HES
  • Riviera-PRO
  • ALINT-PRO
  • Spec-TRACER
  • TySOM
Altair Engineering

Through Polliwog Acquisition

  • PollEx
Altium
  • Altium Designer
    • PCB Design
    • Circuit Simulation
    • Altium Designer - PCB Design software, Schematic Capture and Circuit Simulation
    • Altium Vault - Design Data Management Solution
    • PDN Analyzer - Power Distribution and Network Analysis (A/C)
    • CircuitStudio - easy-to-use PCB design tool
    • CircuitMaker - free community-driven PCB design tool for makers
    • SOLIDWORKS PCB Connector - OEM Product provides link from AD to you MCAD environment in SOLIDWORKS
    • EDA Connect - Direct Link Between Altium Environment & Enterprise PLM
  • Protel PCB (discontinued)
  • P-CAD (discontinued - former EDA from Accel Technologies)
  • Autotrax (discontinued)
  • EasyTrax (discontinued)

Through Upverter Acquisition

  • Upverter - online EDA
    • Schematic Capture
    • PCB Layout
    • System Design Tool

Through Perception Software Acquisition

  • EDAConnect
Ansys
  • Ansoft HFSS - High-Frequency Structure Simulation
  • Apache Design, Inc. products:
    • PowerArtist: RTL Design for Power Platform
    • RedHawk: Full-chip Dynamic SoC Power Integrity Solution
    • Totem: Analog and Mixed-Signal Power & Noise Platform
    • Sentinel: Chip-Package-System Co-design/Co-analysis Solution
    • PathFinder: Layout-based ESD Integrity Solution

Through Helic Acquisition

  • Pharos
  • VeloceRF
  • RaptorX
  • Exalto

Through DfR Solutions Acquisition

  • Sherlock Automated Design Analysis
Arteris

Through Magillem Design Services Acquisition

  • Packaging: MRE, MIP
  • Connectivity: MPA, MVP
  • Registers: MRV
  • Embedded software: MSE, MSX
  • CAD Flows: MDL, MCS, MGS
Autodesk
  • EAGLE
  • Fusion 360 (Electronics Design feature)
  • 123D Circuits (formerly Circuits.io; discontinued) - online EDA
    • Electronics Lab
    • PCB Design
    • Circuit Scribe
    • MESH
  • Autodesk Library.io - parts library management tool
  • Tinkercad Circuits (formerly Electronics Lab[1])
Cadence Design Systems
  • System Development Suite with Verification Computing Platform, Virtual System Platform, Incisive Verification Platform, and Rapid Prototyping Platform
  • C-to-Silicon
  • Verification IP Catalog
  • Design IP
  • Chip Planning Solution
  • Virtuoso - IC Artist
  • Virtuoso - IC Layout
  • Virtuoso - Layout Migrate
  • Innovus - Digital IC design
  • Encounter - Digital IC design
  • Encounter - Conformal-LEC
  • Encounter - Conformal Low Power
  • Encounter - Conformal ECO Designer
  • Encounter - Conformal Constraint Designer
  • Encounter - RTL Compiler
  • Encounter - RTL Compiler Physical
  • Encounter - Test ATPG
  • Encounter - Test Diagnostics
  • Encounter - Design Implementation
  • Encounter - QRC (Extraction & Checking)
  • Encounter - Nanoroute
  • Allegro - PC/MCM design
  • Incisive - functional verification
  • Design for Manufacturing
  • Specctra autorouter
  • OrCAD
    • PSpice
  • Denali Software products
    • Specctra
    • PureSpec
    • MMAV
    • Databahn
    • Blueprint
  • Sigrity products
    • OptimizePI
    • PowerDC
    • XtractIM
    • PowerSI
    • Broadband SPICE
    • SPEED2000
    • Channel Designer
    • XcitePI
    • OrbitIO Planner
    • Unified Package Designer (UPD) acquired from Synopsys
  • Forte Design Systems products
    • Cynthesizer

Through AWR Corporation Acquisition

  • Platform:
    • AWR Design Environment – high frequency (RF/microwave) design
  • Simulators:
    • Microwave Office - RF/microwave circuit simulation, APLAC - Harmonic balance solver for nonlinear, frequency domain circuit simulation
    • Analog Office - analog/RFIC simulation
    • Visual System Simulator (VSS) - system level communication/radar simulator
  • EM solvers:
    • AXIEM (3D planar electromagnetic simulator) – 3D planar, Method of Moments
    • Analyst (Arbitrary 3D FEM simulator) – full 3D, finite element method with adaptive meshing
    • AntSyn – Antenna Synthesis

Through Integrand Software Acquisition

  • EMX
  • Continuum
  • PCELLS
COSEDA Technologies
  • COSIDE
Dassault Systemes

Through CST acquisition

  • CST Studio Suite
    • CST MICROWAVE STUDIO (CST MWS)
    • CST EM STUDIO (CST EMS)
    • CST PARTICLE STUDIO (CST PS)
    • CST CABLE STUDIO (CST CS)
    • CST PCB STUDIO (CST PCBS)
    • CST BOARDCHECK
    • CST MPHYSICS STUDIO (CST MPS) - electronics cooling
    • CST DESIGN STUDIO (CST DS)
  • IdEM
    • generation of macromodels
Dolphin Design
  • SLED - Schematic entry and netlisting
  • SMASH - Mixed-signal, mixed-language modeling and simulation
  • SCROOGE TLA - Mixed-signal power consumption estimation
  • SoC GDS - Layout viewer and processor
  • GDS Reticle - Test pattern frame generator
  • SmartVision - application software debug capabilities thanks to the modeling and simulation of the complete sub-system including processors, memories and peripherals
EasyEDA
  • EasyEDA - online EDA
    • Schematic capture
    • SPICE simulation
    • PCB layout
EasyLogix - Schindler & Schill GmbH
  • PCB-Investigator - Professional ECAD Workstation for PCB development
  • GerberLogix - Free Gerber Viewer
  • Online-Gerber-Viewer - Free Gerber Viewer (no installation required)
Eremex
  • TopoR - topological router for printed circuit boards laid out in any compatible systems that use the PCAD ASCII PCB, PADS ASCII PCB or DSN format
  • SimOne - circuit simulation (the basic circuit analyses common to SPICE modeling systems + stability analysis)
  • Delta Design - software tool for electronic design automation (EDA)
IC Manage
  • GDP Design & IP Management, Envision Design Progress Analytics, Envision Verification Analytics, High Performance Computing
Ing.-Büro FRIEDRICH

TARGET 3001! PCB Layout CAD Software

  • Schematic editor
  • Simulation PSpice compliant
  • PCB design
  • Front panel design
  • SQL component database
  • 3D model design, STEP Import, STEP Export
  • PCB assembly price calculator
  • Electra: High speed auto router
  • COMPONIVERSE: A component exchange
  • MID Design
JEDA Technologies
  • C/C++/SystemC Model Validation Tool Suite
  • OCP Validation Suite
  • TLM2.0 Validation Suite
Keysight Technologies EDA division (formerly EEsof)
  • Platforms:
    • PathWave Advanced Design System[2] – high frequency and high speed design
    • PathWave EM Design (formerly EMPro and Antenna Modeling Design System) - 3D EM platform
    • PathWave RFIC Design (formerly GoldenGate which supersedes RF Design Environment) - RFIC/RF mixed signal simulator (Xpedion acquisition)
    • PathWave Device Modeling (formerly IC-CAP), PathWave Model Builder (formerly MBP), PathWave Model QA (formerly MQA) - Device modeling and validation (all but IC-CAP from Accelicon acquisition)
    • PathWave RF Synthesis (formerly Genesys) - RF and microwave design (Eagleware-Elanix acquisition)
    • PathWave System Design (formerly SystemVue) - Electronic system-level design (Eagleware-Elanix acquisition)
  • EM solvers:
    • Momentum – 3D planar, frequency domain, available with the ADS, Genesys, and GoldenGate platforms
    • FEM Element – full 3D, frequency domain, available with the ADS and EMPro platforms
    • FDTD – full 3D, time domain, available with the EMPro platform
Lauterbach
  • in-circuit debuggers (JTAG and non-JTAG) with optional trace functionality
  • in-circuit emulators
  • front-ends to debug virtual platforms for embedded software development (ESL)
Siemens EDA
(formerly Mentor Graphics)
acquired by Siemens in 2017.
  • ADiT - Nanometer IC Design: fast SPICE
  • Questa ADMS - Nanometer IC Design: mixed-signal simulator
  • Board Station - PCB design software
  • Calibre - physical verification
  • Catapult Synthesis - ESL Design: high-level synthesis
  • Catapult Library Builder - ESL Design: high-level synthesis
  • Design Architect-IC - Nanometer IC Design
  • Eldo - Nanometer IC Design: SPICE simulator
  • Eldo RF - Nanometer IC Design: SPICE simulator
  • Expedition - PCB design software
  • IP - intellectual property (now part of embedded systems division)
  • ModelSim LE - Nanometer IC Design: digital design and simulation; Linux-based simulator with Dataflow Window and Waveform Compare
  • ModelSim PE - Nanometer IC Design: digital design and simulation; Windows-based simulator for VHDL, Verilog, or mixed-language simulation environments
  • ModelSim SE - Nanometer IC Design: digital design and simulation; tri-lingual simulator with VHDL, Verilog, and SystemC
  • Nimbic products[3]
  • Nucleus EDGE - embedded systems development tools
  • Inflexion - embedded systems application platform tools
  • Nucleus OS - embedded systems OS
  • Olympus-SoC - place and route
  • PADS - PCB design software (Innoveda acquisition)
  • Platform Express Professional - ESL Design: platform-based design
  • Platform Express Integrator's Kit - ESL Design: platform-based design
  • Platform Express Client - ESL Design: platform-based design
  • Questa - digital and mixed-signal simulation
  • System Architect - ESL Design: system analysis
  • SystemVision - Mechatronic Design: system analysis
  • Tessent suite for test
    • Tessent TestKompress
    • Tessent BoundaryScan
    • Tessent FastScan
    • Tessent IJTAG
    • Tessent LogicBIST
    • Tessent Scan/ScanPro
  • Vista - ESL Design: system debug
  • Visual Elite - ESL Design: system integration
  • Veloce/Veloce2 - high speed, high capacity SoC emulation

Through LogicVision Acquisition

  • Dragonfly - Embedded test IP insertion tool for logic, memory and mixed-signal testing
  • Silicon Insight - Interactive program that works with 3rd party testers for controlling and logging of data on the device for at-speed testing
  • Yield Insight - Yield analysis program which looks at foundry and performance data to diagnose possible problems
  • HDL Designer Series

Through Solido Design Automation Acquisition

  • Solido Variation Designer - variation-aware design of custom integrated circuits
    • Fast PVT—verify against process, voltage, and temperature corners
    • Fast Monte Carlo—verification against 3-sigma process (statistical) variation
    • High-Sigma Monte Carlo—verification against high-sigma process (statistical) variation
    • Cell Optimizer—automated sizing of custom ICs

Through Austemper Design Systems Acquisition

  • SafetyScope: Computes the FIT rates and diagnostic coverage metrics for permanent and transient faults
  • Annealer: Safety synthesis tools for adding error correcting codes (ECC), error detection codes (EDC), block level duplication or triple instances or design.
  • RadioScope: Safety synthesis tools for adding ECC or EDC to banks of flops, duplication of critical sections of the design, addition of illegal condition checks.
  • KaleidoScope: Fault campaign tool capable of fault propagation and disposition of injected faults into detected, safe and undetected faults.

Through UltraSoC Acquisition

  • Tessent Embedded Analytics

Through Avatar Integrated Systems Acquisition

  • Aprisa
  • Apogee

Through OneSpin Solutions Acquisition

  • 360 DV-Inspect
  • 360 DV-Verify
  • 360 DV-Certify
  • 360 EC-FPGA
  • 360 EC-ASIC
  • 360 EC-RTL
  • FMEDA

Through Fractal Technologies Acquisition

  • Solido Crosscheck (formerly Crossfire)
VisualSim Architect (Mirabilis Design Inc)
  • Systems Specification and Design
  • Hardware Design
  • Software Validation
  • Power Exploration
National Instruments
  • National Instruments Electronics Workbench Group
Novarm
Silvaco

SPICE modeling and analog & mixed-signal simulation

  • Utmost IV - Device characterization and SPICE modeling
  • SmartSpice - Analog circuit simulator
  • SmartSpice RF - Frequency and time domain RF circuit simulator
  • Harmony - Analog/mixed-signal circuit simulator
  • SmartView - Simulation waveform viewer

Custom IC CAD

  • Gateway - Schematic editor
  • Expert - Layout editor
  • Guardian - DRC/LVS/NET physical verification
  • Hipex - Full-chip parasitic extraction
  • Jivaro - Parasitic reduction and analysis
  • VarMan - High-sigma variability analysis

Interconnect modeling

  • Quest - 3D RF passive device modeling
  • Clever - Parasitic extractor for realistic 3D structures
  • Stellar - 3D physics-based parasitic extractor for carge cells
  • Exact - Full-chip LPE rule file generator

Library Platform

  • Cello - Standard cell library creation, migration and optimization
  • Viola - Standard cell library and I/O cell characterization
  • Liberty Analyzer - Analysis and validation of timing, power, noise and area data from characterization

TCAD

  • Victory Process - 2D/3D semiconductor process simulator
  • Victory Device - 2D/3D semiconductor device simulator
  • Virtual Wafer Fab - Emulation of wafer manufacturing to perform design-of-experiments and optimization.

Through Coupling Wave Solutions assets' Acquisition

  • WaveIntegrity
  • SiPEX

Through Polyteda Cloud Acquisition

  • PowerDRC/LVS - DRC/LVS physical verification
  • Nefelus CMS
Synopsys
  • Astro - place and route
  • Cosmos Scope
  • Custom Designer
  • Design Compiler
  • DFT Compiler
  • DFTMAX compression
  • Formality
  • Hercules - physical verification
  • HSIM
  • HSPICE
  • IC Compiler - place and route
  • IC Validator
  • NANOSIM
  • OptoCompiler
  • Physical Compiler
  • Proteus OPC
  • Protocol Analyzer (debugging tool)
  • PrimeTime - static timing analysis
  • Saber
  • Sentaurus TCAD
  • Spice explorer
  • Star-RCXT
  • Synphony C Compiler - high-level synthesis
  • TetraMAX ATPG
  • VCS
  • VIP
  • XA
  • Yield Explorer - yield management
  • Viewlogic products
    • Powerview (discontinued)

Through Magma Design Automation Acquisition

  • FineSim
  • SiliconSmart

Through Synplicity Acquisition[4]

  • Synplify Pro

Through Terrain EDA Acquisition[5]

  • (formerly )

Through Dorado Design Automation (Dorado DA) Acquisition

  • ECO System
    • Tweaker-T1 Timing ECO
    • Tweaker-P1 Leakage Power ECO
    • Tweaker-P2 Dynamic Power ECO
    • Tweaker-C1 Clock ECO
    • Tweaker-M1 Metal ECO
    • Tweaker-F1 Functional ECO
  • Recovery System
    • Tweaker-A1 Area Recovery
    • Tweaker-P1 Dynamic Power Recovery
    • Tweaker-R1 Reliability Recovery
WestDev
  • Pulsonix
    • Pulsonix Schematic Capture
    • Pulsonix Advanced PCB Layout
    • Embedded Component Technology
    • Flexi-rigid Circuit Design
    • Chip-on-board Design
    • Spice Mixed Mode A/D Simulation
    • Constraints Driven Interactive High Speed Design
    • Shape Based Autorouter
    • Product Life Management(PLM) Interface
    • Corporate Database Connection Interface
    • 3D View
Zuken

FPGA companies[]

Company EDA products
Intel Intel acquired Altera in 2015.
Lattice Semiconductor
  • Lattice Diamond
  • iCEcube2
Microsemi
(Subsidiary of Microchip Technology)
Microsemi acquired Actel in 2010.
  • Libero
Xilinx

Electronics distribution companies[]

Company EDA products
Digi-Key
RS Components

Development communities[]

Community EDA products
gEDA
  • gschem: schematics editor
  • pcb: PCB layout editor
  • gerbv: Gerber file viewer
KiCad (GPL)
  • eeschema - schematic capture
  • PCBnew - PCB layout
  • gerbview - Gerber viewer

Defunct companies[]

EDA companies that no longer exist
Analog Design Automation acquired by Synopsys[6] in 2004
  • Creative Genius - Automated sizing of analog integrated circuits
  • IP Explorer - High-dimensional visualization of analog performance tradeoffs
Ansoft Corporation acquired by Ansys
Applied Wave Research acquired by Cadence Design Systems
  • Microwave Office
  • Analog Office
  • Visual System Simulator
  • APLAC
  • AXIEM
ARC International acquired by Synopsys
  • ARC VTOC
Automated Systems, Inc. acquired by Cadence Design Systems[7] in 1990
  • PRANCE GT - Placement, Routing and Numerical Control Editing for PCB design and layout
Avant! Corporation acquired by Synopsys[8] in 2002. Avant! itself resulted from the merger of ArcSys and Integrated Silicon Systems on November 27, 1995. It acquired Anagram on September 27, 1996, Meta-Software on October 29, 1996, FrontLine Design Automation on November 27, 1996, and Nexsyn Design Technology on December 31, 1996.[9]
Azuro acquired by Cadence[10] in 2011
  • PowerCentric - Clock tree synthesis and automatic clock gating
  • Rubix - Physical optimization and automatic useful skew
CadSoft Computer acquired by Autodesk in 2016
Calma merged into Valid, then Cadence Design Systems[11]
Ciranova Acquired by Synopsys[12] in 2012
CoFluent Design acquired by Intel[13] in 2011
  • CoFluent Studio
  • CoFluent Reader
Coware acquired by Synopsys in 2010
CST - Computer Simulation Technology acquired by Dassault Systemes in 2016
Daisy Systems merged with in 1988
Denali Software acquired by Cadence Design Systems in Q2 of 2010
ECAD, Inc. merged with in 1987 to create Cadence
Forte Design Systems acquired by Cadence Design Systems[14] in 2014
  • Cynthesizer
Gateway Design Automation acquired by Cadence Design Systems in 1989
  • Verilog HDL
  • Verilog-XL
Ikos Systems acquired by Mentor Graphics in 2002
  • NSIM - gate-level simulation accelerator HW
  • Gemini - Verilog simulation accelerator product
  • Voyager - VHDL simulation accelerator product
Interactive Image Technologies or Electronics Workbench acquired by National Instruments in 2005
LogicVision acquired by Mentor Graphics in 2009
Magma Design Automation acquired by Synopsys in 2012
NanGate acquired by Silvaco in 2018
Nimbic (formerly Physware) acquired by Mentor in 2014[3]
OrCAD acquired by Cadence in 1999
Protel renamed as Altium
Solido Design Automation acquired by Siemens in 2017
SpringSoft, Inc. acquired by Synopsys[15]
  • Verdi - automated debug system
  • Debussy - debug modules
  • Siloti - visibility enhancement solutions
  • Certitude - Functional Qualification System
  • Laker - Custom Layout System
Valid Logic Systems merged into Cadence[16]
Upverter acquired by Altium in 2017
DAFCA
  • ClearBlue
Spectrum Software closed in 2019

See also[]

  • List of items in the category Electronic Design Automation companies
  • Comparison of EDA software
  • Cadence Design Systems: Acquisitions and mergers
  • Synopsys: Acquisitions, mergers, spinoffs

References[]

  1. ^ Autodesk 123D apps, Autodesk
  2. ^ "PathWave Advanced Design System". Keysight Technologies.{{cite web}}: CS1 maint: url-status (link)
  3. ^ a b "Mentor Graphics Acquires Nimbic, Inc". mentor.com (Press release). May 20, 2014. Retrieved 2015-02-07.
  4. ^ "Synopsys acquires Synplicity-What does it mean?". Eetimes.com. Archived from the original on 2011-06-15. Retrieved 2010-05-07.
  5. ^ Terrain EDA CB Insights
  6. ^ "COMPANY NEWS; Cadence Acquires Software Company". EE Times. 2004-01-28. Retrieved 2014-09-25.
  7. ^ "COMPANY NEWS; Cadence Acquires Software Company". The New York Times. 1990-04-11. Retrieved 2013-07-01.
  8. ^ "Synopsys to acquire Avanti for $830 million". EETimes.com. Retrieved 2010-05-07.
  9. ^ AVANT CORP IPO filing at EDGAR
  10. ^ "Cadence acquires power specialist Azuro". EETimes. July 12, 2011. Retrieved 2013-05-20.
  11. ^ Carl Machover (1998). "About This Issue". IEEE Annals of the History of Computing. 20 (2): 3–6.
  12. ^ "Vision fulfilled: SNPS acquires Ciranova". EDACafe.com. 2012-08-01. Retrieved 2013-09-19.
  13. ^ "Updated: Intel acquires ESL firm CoFluent". EETimes.com. 2011-09-13. Retrieved 2013-05-20.
  14. ^ Cadence press release: Cadence to Enhance High-Level Synthesis Offering with Acquisition of Forte Design Systems
  15. ^ "Synopsys to buy SpringSoft for $406 million". Eetimes.com. Retrieved 2013-05-20.
  16. ^ "EDA Innovation through Merger and Acquisitions". 0.edacafe.com. 2006-05-22. Retrieved 2010-05-07.
Retrieved from ""