Sentetsu Purena-class locomotives

Chosen Government Railway Purena class (プレナ) Gyeongchun Railway Purena class (プレナ) Korean National Railroad Pureo7 class (푸러7) Korean State Railway Purŏch'i class (부러치) South Manchuria Railway Puresa class (プレサ) China Railways PL3
China Railways PL3-51 at Beijing Railway Museum. This was originally a Mantetsu Puresa-class locomotive.
Type and origin Power type Steam Builder Original: Hitachi Kasato, Kawasaki Bureau: , Kawasaki, Hitachi Kasato, Nippon Sharyō Build date 1930–1941 Total produced 112
Specifications Configuration: ​  • Whyte 2-6-2T Gauge 1,435 mm (4 ft 8+1⁄2 in) Driver dia. 1,370 mm (54 in) Length Original: 10,480 mm (34 ft 5 in) Bureau: 10,773 mm (35 ft 4.1 in) Width Original: 3,250 mm (10 ft 8 in) Bureau: 3,200 mm (10 ft 6 in) Height Original: 4,268 mm (14 ft 0 in) Bureau: 4,230 mm (13 ft 11 in) Adhesive weight Original: 42.00 t (41.34 long tons) Bureau: 44.90 t (44.19 long tons) Loco weight Original: 65.50 t (64.47 long tons) Bureau: 67.70 t (66.63 long tons) Fuel capacity Original: 2.50 t (2.46 long tons) Bureau: 3.00 t (2.95 long tons) Water cap Both: 7,000 L (1,800 US gal) Firebox:  • Firegrate area Both: 2.60 m2 (28.0 sq ft) Boiler: ​  • Small tubes Original: 106 x 45 mm (1.8 in) Bureau: 104 x 51 mm (2.0 in)  • Large tubes Original: 26 x 137 mm (5.4 in) Bureau: 21 x 137 mm (5.4 in) Boiler pressure Both: 13.0 kgf/cm2 (185 psi) Heating surface Original: 116.90 m2 (1,258.3 sq ft) Bureau: 118.30 m2 (1,273.4 sq ft)  • Tubes Original: 73.10 m2 (786.8 sq ft) Bureau: 82.80 m2 (891.3 sq ft)  • Firebox Original: 11.60 m2 (124.9 sq ft) Bureau: 9.50 m2 (102.3 sq ft) Superheater: ​  • Heating area Original: None Bureau: 26.00 m2 (279.9 sq ft) Cylinders 1 Cylinder size Both: 430 mm × 610 mm (17 in × 24 in) Valve gear Walschaerts
Performance figures Maximum speed 75 km/h (47 mph) Tractive effort Original: 85.0 kN (19,100 lbf) Bureau: 89.0 kN (20,000 lbf)
Career Operators Chosen Government Railway Gyeongchun Railway Korean National Railroad Korean State Railway South Manchuria Railway Chinese Changchun Railway China Railway Class Sentetsu: プレナ KNR: 푸러7 KSR: 부러치 Mantetsu: プレサ CR: PL3 Number in class Sentetsu: 93 Gyeongchun: 9 Mantetsu: 18 CR: 10 Numbers Sentetsu: プレナ1 – プレナ93 Mantetsu: プレサ1 – プレサ18 CR: PL3-51 – PL3-60 Delivered 1930–1941

The Purena-class (プレナ) locomotives were a group of steam tank locomotives with 2-6-2 wheel arrangement of used by the Chosen Government Railway (Sentetsu) in Korea. The "Pure" name came from the American naming system for steam locomotives, under which locomotives with 2-6-2 wheel arrangement were called "Prairie".^[1]

In all, Sentetsu owned 227 locomotives of all Pure classes, whilst privately owned railways owned another 52; of these 279 locomotives, 169 went to the Korean National Railroad in South Korea and 110 to the Korean State Railway in North Korea.^[2]

Description[]

Locomotives of this design were built for one unidentified private railway company in Korea, the Chosen Government Railway, and the privately owned Gyeongchun Railway in Korea, as well as for the South Manchuria Railway.

Chosen Government Railway プレナ (Purena) class[]

The プレナ (Purena) class locomotive was designed by the Railway Bureau based on the experiences gained through the design of modifications leading to the Pureshi-class rebuilds, and differed considerably from the imported Pure classes.^[3] The first eight were built for a private railway, with Hitachi's Kasato factory^[3] and Kawasaki^[4] each building four units; these were bought by Sentetsu in 1936 and numbered 341-348.^[5]

The design was then modified to include a superheater, but the resulting design retained the "Purena" classification; the two subclasses were thenceforward referred to as the "Original Purena" and "Bureau Purena" (局プリナ) classes. The first six Bureau Purena locomotives were built for Sentetsu in 1931 by the Gyeongseong Works;^[3] these were numbered 321 through 326.^[5] The 14 locomotives of both Purena subtypes were lumped together in Sentetsu's general renumbering of 1938, with 341–348 becoming プレナ1 through プレナ8, and 321–326 becoming プレナ9 through プレナ14.^[5] In 1938 four more were built by Nippon Sharyō and fourteen more were built at Gyeongseong. In 1939 and 1941,^[4] a total of nine were built by Kawasaki and Hitachi Kasato for the Gyeongchun Railway;^[3] these were assembled in Korea at Sentetsu's Busan shops and numbered プレナ85 through プレナ93.

South Manchuria Railway プレサ (Puresa) class[]

Nineteen locomotives of the Sentetsu Purena design were built for the South Manchuria Railway (Mantetsu) in Japan in 1935.^[6] Although under the Mantetsu classification system tank locomotives were generally given the "Dabu" (ダブ, from "double-ender") classification,^[7] Mantetsu instead designated these as プレサ (Puresa) class; eight were assigned to Mantetsu's Rajin depot for use on the North Chosen Line, whilst the other ten were assigned to depots in Manchukuo.

Postwar[]

After the end of the Pacific War, the locomotives owned by Sentetsu and the Gyeongchun Railway were divided between North and South Korea, whilst those belonging to Mantetsu were divided between North Korea and China.

Korean National Railroad 푸러7 (Pureo7) class[]

Many Purena class locomotives ended up with the Korean National Railroad after Liberation, which designated them 푸러7 (Pureo7) class;^[3] at least 15 are known to have been operated by the KNR.^[5]

Korean State Railway 부러치 (Purŏch'i) class/1700 series[]

The Sentetsu Purena class locomotives that remained in the North after the partition of Korea were operated by the Korean State Railway, designating them 부러치 (Purŏch'i) class, and later renumbering them into the 1700 series around the early 1970s. One, number 1718, was noted dumped near the steelworks in Ch'ŏngjin in 2015.^[8]

Korean State Railway 부러서 (Purŏsŏ) class/1300 series[]

The nine Puresa-class locomotives that Mantetsu had assigned to its Rajin depot were taken over by the Korean State Railway after the war. They were initially designated 부러서 (Purŏsŏ) class - together with the Puresa-class engines inherited from Sentetsu - and were retained in use mostly around Rajin; around the early 1970s, they were renumbered into the 1300 series, though at least one's number omitted the initial '1'.^[9] At least two have been seen operational in the 21st century; one, 1304, was seen in 2001 doing shunting work at Ch'ŏngjin,^[9] while the other, 1319, is still operational as of October 2015, kept in pristine condition for use with tourist and railfan trains.^[10]

The one unit known to have omitted the initial '1', number 307, was inspected by Kim Jong-il as a child at Rajin Station on 6 September 1954.^[11] This locomotive has also been depicted on a commemorative stamp issued by the DPRK postal service.^[9]

China Railways PL3 class[]

The ten Puresa-class engines that were used by Mantetsu in Manchukuo were taken over first by the joint Chinese-Soviet "Chinese Changchun Railway" (Chinese: 中國長春鐵路, Zhōngguó Chǎngchūn Tiělù; Russian: Кита́йская Чанчу́ньская желе́зная доро́га, Kitayskaya Chanchun'skaya Zheleznaya doroga), which took over Mantetsu operations within China in 1945. In 1952, the Chinese Changchun Railway was returned to China,^[12] and they were taken over by the China Railway as class ㄆㄌ3. In 1959, they were designated class PL3, numbered 51–60.^[13]

Construction[]

References[]