Stokes' theorem
![](http://upload.wikimedia.org/wikipedia/commons/thumb/4/4c/Stokes%27_Theorem.svg/220px-Stokes%27_Theorem.svg.png)
Part of a series of articles about |
Calculus |
---|
Stokes' theorem,[1] also known as Kelvin–Stokes theorem[2][3] after Lord Kelvin and George Stokes, the fundamental theorem for curls or simply the curl theorem,[4] is a theorem in vector calculus on . Given a vector field, the theorem relates the integral of the curl of the vector field over some surface, to the line integral of the vector field around the boundary of the surface. The classical Stokes' theorem can be stated in one sentence: The line integral of a vector field over a loop is equal to the flux of its curl through the enclosed surface.
Stokes' theorem is a special case of the generalized Stokes' theorem.[5][6] In particular, a vector field on can be considered as a 1-form in which case its curl is its exterior derivative, a 2-form.
Theorem[]
Let be a smooth oriented surface in R3 with boundary . If a vector field is defined and has continuous first order partial derivatives in a region containing , then
The main challenge in a precise statement of Stokes' theorem is in defining the notion of a boundary. Surfaces such as the Koch snowflake, for example, are well-known not to exhibit a Riemann-integrable boundary, and the notion of surface measure in Lebesgue theory cannot be defined for a non-Lipschitz surface. One (advanced) technique is to pass to a weak formulation and then apply the machinery of geometric measure theory; for that approach see the coarea formula. In this article, we instead use a more elementary definition, based on the fact that a boundary can be discerned for full-dimensional subsets of R2.
Let γ: [a, b] → R2 be a piecewise smooth Jordan plane curve. The Jordan curve theorem implies that γ divides R2 into two components, a compact one and another that is non-compact. Let D denote the compact part; then D is bounded by γ. It now suffices to transfer this notion of boundary along a continuous map to our surface in R3. But we already have such a map: the parametrization of Σ.
Suppose ψ: D → R3 is smooth, with Σ = ψ(D). If Γ is the space curve defined by Γ(t) = ψ(γ(t)),[note 1] then we call Γ the boundary of Σ, written ∂Σ.
With the above notation, if F is any smooth vector field on R3, then[7][8]
Proof[]
The proof of the theorem consists of 4 steps. We assume Green's theorem, so what is of concern is how to boil down the three-dimensional complicated problem (Stokes' theorem) to a two-dimensional rudimentary problem (Green's theorem).[9] When proving this theorem, mathematicians normally deduce it as a special case of a more general result, which is stated in terms of differential forms, and proved using more sophisticated machinery. While powerful, these techniques require substantial background, so the proof below avoids them, and does not presuppose any knowledge beyond a familiarity with basic vector calculus and linear algebra.[8] At the end of this section, a short alternate proof of Stokes' theorem is given, as a corollary of the generalized Stokes' Theorem.
Elementary proof[]
First step of the proof (parametrization of integral)[]
As in § Theorem, we reduce the dimension by using the natural parametrization of the surface. Let ψ and γ be as in that section, and note that by change of variables
where Jψ stands for the Jacobian matrix of ψ.
Now let {eu, ev} be an orthonormal basis in the coordinate directions of R2. Recognizing that the columns of Jyψ are precisely the partial derivatives of ψ at y, we can expand the previous equation in coordinates as
Second step in the proof (defining the pullback)[]
The previous step suggests we define the function
This is the pullback of F along ψ, and, by the above, it satisfies
We have successfully reduced one side of Stokes' theorem to a 2-dimensional formula; we now turn to the other side.
Third step of the proof (second equation)[]
First, calculate the partial derivatives appearing in Green's theorem, via the product rule:
Conveniently, the second term vanishes in the difference, by equality of mixed partials. So,
But now consider the matrix in that quadratic form—that is, . We claim this matrix in fact describes a cross product.
To be precise, let be an arbitrary 3 × 3 matrix and let
Note that x ↦ a × x is linear, so it is determined by its action on basis elements. But by direct calculation
Thus (A − AT)x = a × x for any x. Substituting J F for A, we obtain
We can now recognize the difference of partials as a (scalar) triple product:
On the other hand, the definition of a surface integral also includes a triple product—the very same one!
So, we obtain
Fourth step of the proof (reduction to Green's theorem)[]
Combining the second and third steps, and then applying Green's theorem completes the proof.
Proof via differential forms[]
The functions R → R3 can be identified with the differential 1-forms on R3 via the map
Write the differential 1-form associated to a function F as ωF. Then one can calculate that
where ★ is the Hodge star and is the exterior derivative. Thus, by generalized Stokes' theorem,[10]
Applications[]
In fluid dynamics[]
In this section, we will discuss the lamellar vector field based on Stokes' theorem.
Irrotational fields[]
Definition 2-1 (irrotational field). A smooth vector field F on an open U ⊆ R3 is irrotational if ∇ × F = 0.
If the domain of F is simply connected, then F is a conservative vector field.
Helmholtz's theorems[]
In this section, we will introduce a theorem that is derived from Stokes' theorem and characterizes vortex-free vector fields. In fluid dynamics it is called Helmholtz's theorems.
Theorem 2-1 (Helmholtz's theorem in fluid dynamics).[5][3]: 142 Let U ⊆ R3 be an open subset with a lamellar vector field F and let c0, c1: [0, 1] → U be piecewise smooth loops. If there is a function H: [0, 1] × [0, 1] → U such that
- [TLH0] H is piecewise smooth,
- [TLH1] H(t, 0) = c0(t) for all t ∈ [0, 1],
- [TLH2] H(t, 1) = c1(t) for all t ∈ [0, 1],
- [TLH3] H(0, s) = H(1, s) for all s ∈ [0, 1].
Then,
Some textbooks such as Lawrence[5] call the relationship between c0 and c1 stated in theorem 2-1 as "homotopic" and the function H: [0, 1] × [0, 1] → U as "homotopy between c0 and c1". However, "homotopic" or "homotopy" in above-mentioned sense are different (stronger than) typical definitions of "homotopic" or "homotopy"; the latter omit condition [TLH3]. So from now on we refer to homotopy (homotope) in the sense of theorem 2-1 as a tubular homotopy (resp. tubular-homotopic).[note 2]
Proof of the theorem[]
![](http://upload.wikimedia.org/wikipedia/commons/thumb/8/8f/Domain_of_singular_2_cube.jpg/220px-Domain_of_singular_2_cube.jpg)
In what follows, we abuse notation and use "+" for concatenation of paths in the fundamental groupoid and "−" for reversing the orientation of a path.
Let D = [0, 1] × [0, 1], and split ∂D into four line segments γj.
By our assumption that c1 and c2 are piecewise smooth homotopic, there is a piecewise smooth homotopy H: D → M
Let S be the image of D under H. That
follows immediately from Stokes' theorem. F is lamellar, so the left side vanishes, i.e.
As H is tubular, Γ2 = −Γ4. Thus the line integrals along Γ2(s) and Γ4(s) cancel, leaving
On the other hand, c1 = Γ1 and c3 = −Γ3, so that the desired equality follows almost immediately.
Conservative forces[]
Helmholtz's theorem gives an explanation as to why the work done by a conservative force in changing an object's position is path independent. First, we introduce the Lemma 2-2, which is a corollary of and a special case of Helmholtz's theorem.
Lemma 2-2.[5][6] Let U ⊆ R3 be an open subset, with a Lamellar vector field F and a piecewise smooth loop c0: [0, 1] → U. Fix a point p ∈ U, if there is a homotopy (tube-like-homotopy) H: [0, 1] × [0, 1] → U such that
- [SC0] H is piecewise smooth,
- [SC1] H(t, 0) = c0(t) for all t ∈ [0, 1],
- [SC2] H(t, 1) = p for all t ∈ [0, 1],
- [SC3] H(0, s) = H(1, s) = p for all s ∈ [0, 1].
Then,
Lemma 2-2 follows from theorem 2–1. In Lemma 2-2, the existence of H satisfying [SC0] to [SC3] is crucial. If U is simply connected, such H exists. The definition of simply connected space follows:
Definition 2-2 (simply connected space).[5][6] Let M ⊆ Rn be non-empty and path-connected. M is called simply connected if and only if for any continuous loop, c: [0, 1] → M there exists a continuous tubular homotopy H: [0, 1] × [0, 1] → M from c to a fixed point p ∈ c; that is,
- [SC0'] H is continuous,
- [SC1] H(t, 0) = c(t) for all t ∈ [0, 1],
- [SC2] H(t, 1) = p for all t ∈ [0, 1],
- [SC3] H(0, s) = H(1, s) = p for all s ∈ [0, 1].
The claim that "for a conservative force, the work done in changing an object's position is path independent" might seem to follow immediately. But recall that simple-connection only guarantees the existence of a continuous homotopy satisfying [SC1-3]; we seek a piecewise smooth homotopy satisfying those conditions instead.
However, the gap in regularity is resolved by the .[6]: 136, 421 [11] We thus obtain the following theorem.
Theorem 2-2.[5][6] Let U ⊆ R3 be open and simply connected with an irrotational vector field F. For all piecewise smooth loops c: [0, 1] → U
Maxwell's equations[]
In the physics of electromagnetism, Stokes' theorem provides the justification for the equivalence of the differential form of the Maxwell–Faraday equation and the Maxwell–Ampère equation and the integral form of these equations. For Faraday's law, Stokes' theorem is applied to the electric field, :
For Ampère's law, Stokes' theorem is applied to the magnetic field, :
Notes[]
- ^ Γ may not be a Jordan curve, if the loop γ interacts poorly with ψ. Nonetheless, Γ is always a loop, and topologically a connected sum of countably-many Jordan curves, so that the integrals are well-defined.
- ^ There do exist textbooks that use the terms "homotopy" and "homotopic" in the sense of Theorem 2-1.[5] Indeed, this is very convenient for the specific problem of conservative forces. However, both uses of homotopy appear sufficiently frequently that some sort of terminology is necessary to disambiguate, and the term "tubular homotopy" adopted here serves well enough for that end.
References[]
- ^ Stewart, James (2012). Calculus - Early Transcendentals (7th ed.). Brooks/Cole Cengage Learning. p. 1122. ISBN 978-0-538-49790-9.
- ^ Nagayoshi Iwahori, et al.:"Bi-Bun-Seki-Bun-Gaku" Sho-Ka-Bou(jp) 1983/12 ISBN 978-4-7853-1039-4 [1](Written in Japanese)
- ^ a b Atsuo Fujimoto;"Vector-Kai-Seki Gendai su-gaku rekucha zu. C(1)" Bai-Fu-Kan(jp)(1979/01) ISBN 978-4563004415 [2] (Written in Japanese)
- ^ Griffiths, David (2013). Introduction to Electrodynamics. Pearson. p. 34. ISBN 978-0-321-85656-2.
- ^ a b c d e f g Conlon, Lawrence (2008). Differentiable Manifolds. Modern Birkhauser Classics. Boston: Birkhaeuser.
- ^ a b c d e Lee, John M. (2002). Introduction to Smooth Manifolds. Graduate Texts in Mathematics. Vol. 218. Springer.
- ^ Stewart, James (2010). Essential Calculus: Early Transcendentals. Cole.
- ^ a b Robert Scheichl, lecture notes for University of Bath mathematics course [3]
- ^ Colley, Susan Jane (2002). Vector Calculus (4th ed.). Boston: Pearson. pp. 500–3.
- ^ Edwards, Harold M. (1994). Advanced Calculus: A Differential Forms Approach. Birkhäuser. ISBN 0-8176-3707-9.
- ^ L. S. Pontryagin, Smooth manifolds and their applications in homotopy theory, American Mathematical Society Translations, Ser. 2, Vol. 11, American Mathematical Society, Providence, R.I., 1959, pp. 1–114. MR0115178 (22 #5980 [4]). See theorems 7 & 8.
- Electromagnetism
- Mechanics
- Vectors (mathematics and physics)
- Vector calculus