Tungsten disilicide

Tungsten disilicide^[1]
Names
	IUPAC name Tungsten disilicide
Identifiers
CAS Number	12039-88-2 ;
3D model (JSmol)	Interactive image;
ECHA InfoCard	100.031.723
PubChem CID	16212546;
CompTox Dashboard (EPA)	DTXSID6093960 ;
	InChI InChI=1S/2Si.W;
	SMILES [Si]#[W]#[Si];
Properties
Chemical formula	WSi2
Molar mass	240.011 g/mol
Appearance	blue-gray tetragonal crystals
Density	9.3 g/cm3
Melting point	2,160 °C (3,920 °F; 2,430 K)
Solubility in water	insoluble
Hazards
NFPA 704 (fire diamond)	1 0 0
Flash point	Non-flammable
Related compounds
Other anions	Tungsten carbide; Tungsten nitride
Other cations	Molybdenum disilicide
	Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
	(what is ?)
	Infobox references

Tungsten silicide (WSi₂) is an inorganic compound, a silicide of tungsten. It is an electrically conductive ceramic material.

Chemistry[]

Tungsten silicide can react violently with substances such as strong acids, fluorine, oxidizers, and interhalogens.

Applications[]

It is used in microelectronics as a contact material, with resistivity 60–80 μΩ cm; it forms at 1000 °C. It is often used as a shunt over polysilicon lines to increase their conductivity and increase signal speed. Tungsten silicide layers can be prepared by chemical vapor deposition, e.g. using monosilane or dichlorosilane with tungsten hexafluoride as source gases. The deposited film is non-stoichiometric, and requires annealing to convert to more conductive stoichiometric form. Tungsten silicide is a replacement for earlier tungsten films.^[2] Tungsten silicide is also used as a barrier layer between silicon and other metals, e.g. tungsten.

Tungsten silicide is also of value towards use in microelectromechanical systems, where it is mostly applied as thin films for fabrication of microscale circuits. For such purposes, films of tungsten silicide can be plasma-etched using e.g. nitrogen trifluoride gas.

WSi₂ performs well in applications as oxidation-resistant coatings. In particular, in similarity to Molybdenum disilicide, MoSi₂, the high emissivity of tungsten disilicide makes this material attractive for high temperature radiative cooling, with implications in heat shields.^[3]

References[]

^ Lide, David R. (1998), Handbook of Chemistry and Physics (87 ed.), Boca Raton, FL: CRC Press, pp. 4–91, ISBN 0-8493-0594-2
^ "Archived copy". Archived from the original on 2001-09-07. Retrieved 2007-08-19.CS1 maint: archived copy as title (link)
^ High emissivity coatings on fibrous ceramics for reusable space systems Corrosion Science 2019

[hand-1] Lide, David R. (1998), Handbook of Chemistry and Physics (87 ed.), Boca Raton, FL: CRC Press, pp. 4–91, ISBN 0-8493-0594-2

[2] "Archived copy". Archived from the original on 2001-09-07. Retrieved 2007-08-19.CS1 maint: archived copy as title (link)

[3] High emissivity coatings on fibrous ceramics for reusable space systems Corrosion Science 2019

[1]

[2]

[3]