Acrylonitrile

Names
Preferred IUPAC name Prop-2-enenitrile
Other names Acrylonitrile 2-Propenenitrile Cyanoethene Vinyl cyanide (VCN) Cyanoethylene[1] Propenenitrile[1]
Identifiers
CAS Number	107-13-1 Y
3D model (JSmol)	Interactive image
ChEBI	CHEBI:28217 Y
ChEMBL	ChEMBL445612 Y
ChemSpider	7567 Y
ECHA InfoCard	100.003.152
EC Number	608-003-00-4
KEGG	C01998 Y
PubChem CID	7855
RTECS number	AT5250000
UNII	MP1U0D42PE Y
UN number	1093
CompTox Dashboard (EPA)	DTXSID5020029
show InChI InChI=1S/C3H3N/c1-2-3-4/h2H,1H2 Y Key: NLHHRLWOUZZQLW-UHFFFAOYSA-N Y InChI=1/C3H3N/c1-2-3-4/h2H,1H2 Key: NLHHRLWOUZZQLW-UHFFFAOYAG
show SMILES N#CC=C
Properties
Chemical formula	C3H3N
Molar mass	53.064 g·mol−1
Appearance	Colourless liquid
Density	0.81 g/cm3
Melting point	−84 °C (−119 °F; 189 K)
Boiling point	77 °C (171 °F; 350 K)
Solubility in water	70 g/L
log P	0.19[2]
Vapor pressure	83 mmHg[1]
Hazards
Main hazards	flammable reactive toxic potential occupational carcinogen[1]
Safety data sheet	ICSC 0092
NFPA 704 (fire diamond)	4 3 2
Flash point	−1 °C; 30 °F; 272 K
Autoignition temperature	471 °C (880 °F; 744 K)
Explosive limits	3–17%
Lethal dose or concentration (LD, LC):
LC50 (median concentration)	500 ppm (rat, 4 h) 313 ppm (mouse, 4 h) 425 ppm (rat, 4 h)[3]
LCLo (lowest published)	260 ppm (rabbit, 4 h) 575 ppm (guinea pig, 4 h) 636 ppm (rat, 4 h) 452 ppm (human, 1 h)[3]
NIOSH (US health exposure limits):
PEL (Permissible)	TWA 2 ppm C 10 ppm [15-minute] [skin][1]
REL (Recommended)	Ca TWA 1 ppm C 10 ppm [15-minute] [skin][1]
IDLH (Immediate danger)	85 ppm[1]
Related compounds
Related nitriles	acetonitrile propionitrile
Related compounds	acrylic acid acrolein
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y  (what is YN ?)
Infobox references

Acrylonitrile is an organic compound with the formula CH₂CHCN. It is a colorless volatile liquid although commercial samples can be yellow due to impurities. It has a pungent odor of garlic or onions.^[4] In terms of its molecular structure, it consists of a vinyl group linked to a nitrile. It is an important monomer for the manufacture of useful plastics such as polyacrylonitrile. It is reactive and toxic at low doses.^[5] Acrylonitrile was first synthesized by the French chemist Charles Moureu (1863–1929) in 1893.^[6]

Occurrence[]

Acrylonitrile is not naturally formed in the atmosphere of Earth. However it can occur at levels up to 0.11 ppm at industrial sites. It persists in the air for up to a week. It decomposes by reacting with oxygen and hydroxyl radical to form formyl cyanide and formaldehyde.^[7] Acrylonitrile is harmful to aquatic life.^[8]

Acrylonitrile has been detected in the atmosphere of Titan, a moon of Saturn.^[9][10][11] Computer simulations suggest that on Titan conditions exist such that the compound could form structures similar to cell membranes and vesicles on Earth, called azotosomes.^[9][10]

Production[]

Acrylonitrile is produced by catalytic ammoxidation of propylene, also known as the SOHIO process. In 2002, world production capacity was estimated at 5 million tonnes per year.^[5][12] Acetonitrile and hydrogen cyanide are significant byproducts that are recovered for sale.^[5] In fact, the 2008–2009 acetonitrile shortage was caused by a decrease in demand for acrylonitrile.^[13]

2 CH₃−CH=CH₂ + 2 NH₃ + 3 O₂ → 2 CH₂=CH–C≡N + 6 H₂O

In the SOHIO process, propylene, ammonia, and air (oxidizer) are passed through a fluidized bed reactor containing the catalyst at 400–510 °C and 50–200 kPa_g. The reactants pass through the reactor only once, before being quenched in aqueous sulfuric acid. Excess propylene, carbon monoxide, carbon dioxide, and dinitrogen that do not dissolve are vented directly to the atmosphere, or are incinerated. The aqueous solution consists of acrylonitrile, acetonitrile, hydrocyanic acid, and ammonium sulfate (from excess ammonia). A recovery column removes bulk water, and acrylonitrile and acetonitrile are separated by distillation. Historically, one of the first successful catalysts was phosphomolybdate (Bi₉PMo₁₂O₅₂) supported on silica as a heterogeneous catalyst.^[14] Further improvements have since been made.^[5]

Emerging industrial routes[]

Various green chemistry routes are being developed for the synthesis of acrylonitrile from renewable feedstocks, such as lignocellulosic biomass, glycerol (from biodiesel production), or glutamic acid (which can itself be produced from renewable feedstocks). The lignocellulosic route involves fermentation of the biomass to propionic acid and 3-hydroxypropionic acid which are then converted to acrylonitrile by dehydration and ammoxidation.^[15] The glycerol route begins with pyrolysis to acrolein, which undergoes ammoxidation to give acrylonitrile.^[16] The glutamic acid route employs oxidative decarboxylation to 3-cyanopropanoic acid, followed by a decarbonylation-elimination to acrylonitrile.^[17] Of these, the glycerol route is broadly considered to be the most viable, although current methods are still unable to compete with the SOHIO process in terms of cost.^[15][16]

Uses[]

Acrylonitrile is used principally as a monomer to prepare polyacrylonitrile, a homopolymer, or several important copolymers, such as styrene-acrylonitrile (SAN), acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA), and other synthetic rubbers such as acrylonitrile butadiene (NBR). Hydrodimerization of acrylonitrile affords adiponitrile, used in the synthesis of certain nylons:

2 CH₂=CHCN + 2 e⁻ + 2 H⁺ → NCCH₂CH₂CH₂CH₂CN

Small amounts are also used as a fumigant. Acrylonitrile and derivatives, such as 2-chloroacrylonitrile, are dienophiles in Diels–Alder reactions. Acrylonitrile is also a precursor in the industrial manufacture of acrylamide and acrylic acid.^[5]

Health effects[]

Acrylonitrile is highly flammable and toxic at low doses. It undergoes explosive polymerization. The burning material releases fumes of hydrogen cyanide and oxides of nitrogen. It is classified as a Class 2B carcinogen (possibly carcinogenic) by the International Agency for Research on Cancer (IARC),^[18] and workers exposed to high levels of airborne acrylonitrile are diagnosed more frequently with lung cancer than the rest of the population.^[19] Acrylonitrile increases cancer in high dose tests in male and female rats and mice^[20] and induces apoptosis in human umbilical cord mesenchymal stem cells.^[21]

It evaporates quickly at room temperature (20 °C) to reach dangerous concentrations; skin irritation, respiratory irritation, and eye irritation are the immediate effects of this exposure.^[8] Pathways of exposure for humans include emissions, auto exhaust, and cigarette smoke that can expose the human subject directly if they inhale or smoke. Routes of exposure include inhalation, oral, and to a certain extent dermal uptake (tested with volunteer humans and in rat studies).^[22] Repeated exposure causes skin sensitization and may cause central nervous system and liver damage.^[8]

There are two main excretion processes of acrylonitrile. The primary method is excretion in urine when acrylonitrile is metabolized by being directly conjugated to glutathione. The other method is when acrylonitrile is enzymatically converted into 2-cyanoethylene oxide which will produce cyanide end products that ultimately form thiocyanate, which is excreted via urine.^[22] Exposure can thus be detected via blood draws and urine sampling.^[18]

References[]

External links[]

• National Pollutant Inventory – Acrylonitrile
• Comparing Possible Cancer Hazards from Human Exposures to Rodent Carcinogens
• Acrylonitrile – Integrated Risk Information System, U.S. Environmental Protection Agency
• CDC – NIOSH Pocket Guide to Chemical Hazards – Acrylonitrile
• OSHA Table Z-1 for Air Contaminants