Booster separation motor
![]() | This article needs additional citations for verification. (May 2019) |
The booster separation motors or BSMs on the Space Shuttle were relatively small rocket motors that separated the reusable solid rocket boosters (SRB) from the orbiter after SRB burnout. Eight booster separation motors were attached to each of the shuttle's two reusable solid rocket boosters, four on the forward skirt and four on the aft skirt.[1][2] About two minutes into a Space Shuttle flight, all 16 of these motors were fired simultaneously for 1.2 seconds, providing the precise thrust required to safely separate the spent boosters from the Space Shuttle's external tank and orbiter, while traveling more than 1,300 metres per second (2,900 mph) and an altitude of approximately 44 kilometres (27 mi).
The booster separation motors were produced by ATK Launch Systems Group, part of Alliant Techsystems (ATK) Inc., at their facility in Brigham City, Utah. Booster separation motors weighed 177 pounds (80 kg) when loaded with propellant. Each was approximately 31 inches (79 cm) long and 13 inches (33 cm) in diameter.
Northrop Grumman is now manufacturing the booster separation motors for the Space Launch System Boosters, part of the NASA Space Launch System (SLS) for the Artemis program.[3]
References[]
- ^ Dumoulin, Jim (2000) [1988]. "SOLID ROCKET BOOSTERS". NSTS 1988 News Reference Manual. NASA. SRB SEPARATION. Retrieved February 24, 2021.
- ^ Dismukes, Kim, ed. (1988). "SRB Separation". Shuttle Reference. NASA. Archived from the original on February 10, 2001. Retrieved February 24, 2021.
- ^ "Artemis". Northrop Grumman. 2021. Booster Separation Motor. Retrieved February 24, 2021.
- Space Shuttle program