British Rail Class 415

This article needs additional citations for verification. Please help by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources:  –  ·  ·  · scholar · JSTOR (September 2014) (Learn how and when to remove this template message)

British Rail Class 415
5001 at Wimbledon
In service	1951–1995
Manufacturer	BR Eastleigh
Number built	283
Formation	power car + 2 trailer cars + power car
Operator(s)	British Rail
Specifications
Maximum speed	75 mph (121 km/h)
Traction motors	Four EE507
Power output	4 x 250 hp (190 kW) total 1,000 hp (750 kW)
Electric system(s)	750 V DC third rail
Braking system(s)	Electro Pneumatic Brake (EPB)

British Rail Class 415 (or 4EPB) was a suburban 750 V DC third rail electric multiple unit commissioned by the Southern Region of British Railways. Built between 1951 and 1957, it became the most numerous class on the region after the withdrawal of the 4SUBs. The final trains were withdrawn in the 1990s, replaced by Class 455, 456, 465 and 466.

The British Rail designation Class 415 was applied to a group of four coach, 3rd rail electric multiple units constructed between 1951 and 1961 and in service from 1951 to 1995.

Construction[]

4EPBs in Blackfriars in Network SouthEast livery, with St. Paul's Cathedral on the skyline.

The 4EPB units (4-car Electro-Pneumatic Brake) were a development of the Southern Railway (SR) 4Sub design, but incorporating electro-pneumatic brakes, unit-to-unit buckeye couplings, roller blind headcode displays in place of the stencil holders used previously, and without external doors to the driver's cab. There were motor-generators for the lighting and current control whereas previous practice had been to use series lighting and a voltage divider for the control circuits.

The first units built were based on Southern Railway designs and utilised standard Southern railway jigs, being constructed using standard Southern Railway components such as doors and underframes and being built to a standard Southern body profile. The doyen of the class, unit 5001, was completed at Eastleigh in 1951. Further examples were built at Eastleigh up until 1957.

In 1960, the first British Railways design units appeared. Intended to replace the 1925 design Southern Railway suburban electric stock, these units were based on British Railways Mark 1 coaching stock with a different body profile and underframe length from the earlier Class 415 units. The first two units (5301/02), however, were composed of Mark One profile Driving Motor Brake Seconds and Southern Railway profile intermediate vehicles. Unit 5303 was the first to sport intermediate trailers of Mark 1 profile. Two units differed from the rest of the batch in featuring B5 (S) bogies to enable use on peak hour commuter trains to Eastbourne. Reformations over the years, following accidents and incidents, led to a few units becoming composed of a mixture of original design stock of Southern Railway outline and the later, Mark 1 based, British Railways stock.

In the earlier, Southern-style 5001-5053, 5101-5260 series, most units (all of which were one class only) comprised a driving motor open saloon including brake at each end of the set, sandwiching a trailer open and a high-density (6 per side) trailer ten-compartment vehicle with access from the passenger doors; there was no gangway down the coach. A very small number of these 4-EPBs comprised either two open-trailers or two compartment-trailers. A small number of the trailers had been built as 'composites' – a mixture of First and Third Class – and were later fitted out as 9-compartment one-class vehicles but with the former 1st accommodation still identifiable with extra-wide compartments. In the mid-1960s, a number of compartments were marked as women-only, because of the density of cigarette smoke at rush-hour in the general compartments, but as these were not well-regarded they were withdrawn in the late 1960s in favour of non-smoking cars, marked by inverted red triangles on the windows. At first one car per set was allocated to non-smoking, but soon one driving unit and one trailer in each set were the norm.

The production vehicles in the BR series 5301-5370 had slightly higher capacity motor coaches, identical vehicles at each end of the set, with an internal partition splitting the saloon into two smaller ones, and a pair of identical trailers each comprising 5 compartments and a 5-bay open saloon, with the compartment end of each coach always back-to-back with its neighbour.

However, on 23 March 1988, a woman was found murdered in a compartment EPB car on an Orpington/London Victoria working which led to Network SouthEast reconfiguring the then-remaining unrefurbished SR-design 4-EPBs; as a result all compartment stock ran limited workings in busy periods and had a red stripe at the cantrail (the place where the bodysides meet the roof). This stock did not work in service after 8pm and was known as 4COM. These units, being heavier than the EPBs were retained for the winter of 1988/1989 to run overnight keeping the tracks clear of snow.

Most British Rail Class 415 units were withdrawn in the mid-1980s, owing to their partial replacement by newer stock such as the British Rail Class 455 units and the fact that many units contained asbestos. However, a significant number of the units were "facelifted". The asbestos was removed and the units' interiors were improved. This resulted in some re-numbering of stock, so that the earlier units built in the style of the Southern Railway became the 54xx series whilst the British Railways style units became the 56xx series. Some of the 56xx series units received express gear ratios to allow them to work services between London and Kent Coast destinations. Although all the non-refurbished BR Class 415/2s were withdrawn, three Class 415/1s of Southern Railway outline survived until the final withdrawal of Class 415 stock in 1995. These units included 5001, the first unit constructed, and 5176. Both of these units were repainted into liveries previously carried by the class, 5001 receiving British Railways green livery with yellow warning panels and 5176 receiving British Rail blue livery with full yellow ends.

Interior fittings[]

A refurbishment in the late 1970s/early 1980s started converting the six-seat compartment stock to 3+2-seat open saloons. At the same time, the red-brown horsehair seating and metal-framed cord overhead luggage racks were replaced with standard Mark 2 seats and metal racks. 2 x 25w. ceiling bulbs lit each compartment, and the partitions were initially painted in light cream: three publicity panels about 15 cm x 40 cm (6" x 16") filled the space on the compartment walls between the top of the seats and the luggage racks – the central panel was originally a mirror, but as these proved dangerous in service they were soon replaced with normal advertising. The other fittings were a chain alarm-cord in a recess above and to one side of the door, and the door-lock itself, a simple spring-loaded slide: the slam-doors could be opened at speed, albeit at considerable risk to the passenger doing so. The door window could also be opened full-length into a recess in the door panel beneath, initially supported at the bottom by a leather strop, which was soon replaced by a metal friction-bar at the top, bearing on the side-rails – in general they were either closed or with a one- or two-inch opening. The flooring was a strong linoleum on wooded baulks: the linoleum was not present in the guards compartments, which together with the cabs were painted in a dark green. A mirror to a roof periscope facing along the length of the unit was fitted centrally to the guard's side of the rear compartment partition, together with a handle for the sweep-arm cleaner of the roof glasa. Underneath was a small worksurface about 2'x1', a swivel-chair screwed to the floor, and variously a short ladder for evacuating coaches, sometimes a medical cabinet, and a rail-shorting bar would be fixed to the side of the compartment. The driver's cab was fitted with one flap-down seat on each side: the driver occupied the left-hand position.

Summary of sub-classes[]

• 415/1 – unrefurbished 4EPB stock of Southern Design.
• 415/2 – unrefurbished 4EPB stock of BR Design.
• 415/4 – refurbished 4EPB stock of Southern Design (from 1980), numbered in the 54xx series.
• 415/5 – Consolidated compartment 4EPB stock of both designs, numbered in the 55xx series.
• 415/6 – refurbished 4EPB stock of BR Design, numbered in the 56xx series.
• 415/7 – refurbished 4EPB stock of BR Design, with express gearing to 90 mph. These units retained *56xx series numbers.

Accidents and incidents[]

• On 9 August 1957 car 14450 of unit 5225 was destroyed in a collision at Staines Central.^[1] In 1958 it was replaced by 14407 from 5204.
• On 4 December 1957 car 14408 of unit 5204 was destroyed in the Lewisham collision.^[2] The unit was disbanded and the remaining cars later used in other units.
• On 4 July 1958, 5023 was in a head-on collision with an empty stock train at Maze Hill, London after it overran signals. Forty-five people were injured and leading car 14045 written off. The unit was disbanded and the other cars later used in other units.^[3] One of its cars, 14046, was transferred into unit 5031, which was later renumbered 5484 and was involved in the Cannon Street accident in 1991.^[4]
• On 12 October 1972, 5220 was standing at Wimbledon station when a freight train ran into it. Twelve people were injured. Car 14440 was written off and replaced by 14260 The accident was caused by inattentiveness on the part of the driver of the freight which was hauled by E6001^[5]
• On 23 March 1988, a woman was murdered in the compartment of a class 415 operating a service to London Victoria. Her body was discovered at the train's final stop.
• On 22 January 1990, unit 5408 collided with the buffers at Beckenham Junction on arrival from London Bridge and was derailed.^[6]
• On 8 January 1991, 5618 and 5484, along with 2EPB 6227 formed the train involved in the Cannon Street station rail crash, in which a train from Sevenoaks collided heavily with the buffers at London Cannon Street station. Although the speed was low, telescoping of two carriages occurred. Two passengers were killed and 542 injured. The accident was caused by a misjudgement on the part of the driver, possibly owing to the effects of cannabis use.^[7]

Preservation[]

One unit, Class 415/1 unit 5176, survives. One of the two "heritage" units (along with 5001), it was repainted in British Rail blue in the early 1990s and survived until the end of EPB workings in 1995. After spending several years in storage, in 1999 the unit was split, with three vehicles going to the Northamptonshire Ironstone Railway Trust and one intermediate trailer vehicle to the Electric Railway Museum, Warwickshire near Coventry. Class pioneer 5001 was also stored at Kineton Ministry of Defence base following withdrawal in 1995 but no buyer could be found and the unit was stripped and sold for scrap in 2004. Only three vehicles remain at the Northamptonshire Ironstone Railway, with Trailer 15354 having been moved from now-closed Electric Railway Museum to the 1:1 Collection Building at Margate, as a donor/spares vehicle for the 4SUB unit 4732.

References[]

Further reading[]

Wikimedia Commons has media related to British Rail Class 415.

• Marsden, Colin J. (1982). EMUs. Motive Power Recognition. 2. Ian Allan. pp. 78–83. ISBN 9780711011656. OCLC 16537600.