LNER Class Y3

This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help by introducing citations to additional sources. Find sources:  –  ·  ·  · scholar · JSTOR (December 2014)

The LNER Class Y3 was a class of 0-4-0 geared steam locomotives built by Sentinel Waggon Works for the London and North Eastern Railway and introduced in 1927. They passed into British Railways ownership in 1948 and were numbered 68154-68185.^[1] At least one was based at Immingham in 1950.^[2]

Power unit[]

The superheated vertical water-tube boiler and the engine were similar to those used in Sentinel steam wagons. The engines had poppet valves and reversing was by sliding camshaft. The advantage of the water-tube boiler was that steam could be raised much more quickly than with a conventional fire-tube boiler.

Transmission[]

Final drive to the wheels was by sprocket chain. Some locomotives had a sprocket gear ratio of 19:19 and others 15:19. In addition, there was a two-speed gearbox but gears could only be changed while the locomotive was stationary. Tractive effort was:

• Ratio 19:19, Low gear 12,600 lbf (56 kN), High gear 4,705 lbf (20.93 kN) (68154-68179 and 68184-68185)
• Ratio 15:19, Low gear 15,960 lbf (71.0 kN), High gear 5,960 lbf (26.5 kN)(68180-68183)

References[]

Sources[]

• Ludlam, A.J. (2016). Immingham - A Lincolnshire Railway Centre (Lincolnshire Railway Centres). Ludborough, Lincolnshire: Lincolnshire Wolds Railway Society. ISBN 0995461007.

External links[]

• LNER encyclopedia