Titanium tetrachloride

From Wikipedia, the free encyclopedia
Titanium tetrachloride
Spacefill model of titanium tetrachloride
Sample of Titanium tetrachloride 01.jpg
Names
IUPAC name
Titanium(IV) chloride
Other names
Titanium tetrachloride
Tetrachlorotitanium
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.028.584 Edit this at Wikidata
EC Number
  • 231-441-9
MeSH Titanium+tetrachloride
RTECS number
  • XR1925000
UNII
UN number 1838
  • InChI=1S/4ClH.Ti/h4*1H;/q;;;;+4/p-4 checkY
    Key: XJDNKRIXUMDJCW-UHFFFAOYSA-J checkY
  • InChI=1/4ClH.Ti/h4*1H;/q;;;;+4/p-4/rCl4Ti/c1-5(2,3)4
    Key: XJDNKRIXUMDJCW-FOGBWSKZAG
  • Cl[Ti](Cl)(Cl)Cl
Properties
Chemical formula
 TiCl
4
Molar mass 189.679 g/mol
Appearance Colourless liquid
Odor penetrating acid odor
Density 1.726 g/cm3
Melting point −24.1 °C (−11.4 °F; 249.1 K)
Boiling point 136.4 °C (277.5 °F; 409.5 K)
reacts (exothermic hydrolysis)[1]
Solubility soluble in dichloromethane,[2] toluene,[3] pentane[4]
Vapor pressure 1.3 kPa (20 °C)
Magnetic susceptibility (χ)
 −54.0·10−6 cm3/mol
Refractive index (nD)
 1.61 (10.5 °C)
Viscosity 827 μPa s
Structure
Tetragonal
Molecular shape
 Tetrahedral
Dipole moment
 0 D
Thermochemistry
355 J·mol−1·K−1[5]
Std enthalpy of
formation (ΔfH⦵298)
 −763 kJ·mol−1[5]
Hazards[6]
Safety data sheet MSDS
GHS labelling:
GHS05: CorrosiveGHS06: ToxicGHS07: Exclamation mark
Signal word
 Danger
H314, H317, H330, H335, H370, H372
P280, P301+P330+P331, P304+P340, P305+P351+P338, P308+P310
NFPA 704 (fire diamond)
3
0
2
W
Related compounds
Other anions
 Titanium(IV) bromide
Titanium(IV) fluoride
Titanium(IV) iodide
Other cations
 Hafnium(IV) chloride
Zirconium(IV) chloride
Related compounds
 Titanium(II) chloride
Titanium(III) chloride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY  (what is checkY☒N ?)
Infobox references
clear crystals under a clear liquid at the bottom of a glass flask
Crystals of frozen titanium tetrachloride melting into the liquid

Titanium tetrachloride is the inorganic compound with the formula TiCl4. It is an important intermediate in the production of titanium metal and the pigment titanium dioxide. TiCl4 is a volatile liquid. Upon contact with humid air, it forms spectacular opaque clouds of titanium dioxide (TiO2) and hydrated hydrogen chloride. It is sometimes referred to as "tickle" or "tickle 4" due to the phonetic resemblance of its molecular formula (TiCl4) to the word.[7][8]

Properties and structure[]

TiCl4 is a dense, colourless distillable liquid, although crude samples may be yellow or even red-brown. It is one of the rare transition metal halides that is a liquid at room temperature, VCl4 being another example. This property reflects the fact that molecules of TiCl4 weakly self-associate. Most metal chlorides are polymers, wherein the chloride atoms bridge between the metals. Its melting and boiling points are similar to those of CCl4.

Ti4+ has a "closed" electronic shell, with the same number of electrons as the inert gas argon. The tetrahedral structure for TiCl4 is consistent with its description as a d0 metal center (Ti4+) surrounded by four identical ligands. This configuration leads to highly symmetrical structures, hence the tetrahedral shape of the molecule. TiCl4 adopts similar structures to TiBr4 and TiI4; the three compounds share many similarities. TiCl4 and TiBr4 react to give mixed halides TiCl4−xBrx, where x = 0, 1, 2, 3, 4. Magnetic resonance measurements also indicate that halide exchange is also rapid between TiCl4 and VCl4.[9]

TiCl4 is soluble in toluene and chlorocarbons. Certain arenes form complexes of the type [(C6R6)TiCl3]+.[citation needed] TiCl4 reacts exothermically with donor solvents such as THF to give hexacoordinated adducts.[10] Bulkier ligands (L) give pentacoordinated adducts TiCl4L.

Production[]

TiCl4 is produced by the chloride process, which involves the reduction of titanium oxide ores, typically ilmenite (FeTiO3), with carbon under flowing chlorine at 900 °C. Impurities are removed by distillation.

2 FeTiO3 + 7 Cl2 + 6 C → 2 TiCl4 + 2 FeCl3 + 6 CO

The coproduction of FeCl3 is undesirable, which has motivated the development of alternative technologies. Instead of directly using ilmenite, "rutile slag" is used. This material, an impure form of TiO2, is derived from ilmenite by removal of iron, either using carbon reduction or extraction with sulfuric acid. Crude TiCl4 contains a variety of other volatile halides, including vanadyl chloride (VOCl3), silicon tetrachloride (SiCl4), and tin tetrachloride (SnCl4), which must be separated.

Applications[]

Production of titanium metal[]

The world's supply of titanium metal, about 250,000 tons per year, is made from TiCl4. The conversion involves the reduction of the tetrachloride with magnesium metal. This procedure is known as the Kroll process:[11]

2  Mg + TiCl4 → 2 MgCl2 + Ti

In the Hunter process, liquid sodium is the reducing agent instead of magnesium.

Production of titanium dioxide[]

Around 90% of the TiCl4 production is used to make the pigment titanium dioxide (TiO2). The conversion involves hydrolysis of TiCl4, a process that forms hydrogen chloride:[11]

TiCl4 + 2 H2O → TiO2 + 4 HCl

In some cases, TiCl4 is oxidised directly with oxygen:

TiCl4 + O2 → TiO2 + 2 Cl2

Smoke screens[]

It has been used to produce smoke screens since it produces a heavy, white smoke that has little tendency to rise.[12]

Chemical reactions[]

Titanium tetrachloride is a versatile reagent that forms diverse derivatives including those illustrated below.

TiCl4cmpds.png

Hydrolysis and related reactions[]

The most noteworthy reaction of TiCl4 is its easy hydrolysis, signaled by the release of hydrogen chloride and the formation of titanium oxides and oxychlorides, as described above for the production of TiO2. Titanium tetrachloride has been used to create naval smokescreens. The hydrogen chloride immediately absorbs water to form an aerosol of hydrochloric acid that efficiently scatter light. In addition, the highly refractive titanium dioxide is also an efficient light scatterer. This smoke is however corrosive.

Alcohols react with TiCl4 to give the corresponding alkoxides with the formula [Ti(OR)4]n (R = alkyl, n = 1, 2, 4). As indicated by their formula, these alkoxides can adopt complex structures ranging from monomers to tetramers. Such compounds are useful in materials science as well as organic synthesis. A well known derivative is titanium isopropoxide, which is a monomer.

Organic amines react with TiCl4 to give complexes containing amido (R2N−-containing) and imido (RN2−-containing) complexes. With ammonia, titanium nitride is formed. An illustrative reaction is the synthesis of tetrakis(dimethylamido)titanium Ti(NMe2)4, a yellow, benzene-soluble liquid:[13] This molecule is tetrahedral, with planar nitrogen centers.[14]

4 LiNMe2 + TiCl4 → 4 LiCl + Ti(NMe2)4

Complexes with simple ligands[]

TiCl4 is a Lewis acid as implicated by its tendency to hydrolyze. With the ether THF, TiCl4 reacts to give yellow crystals of TiCl4(THF)2. With chloride salts, TiCl4 reacts to form sequentially [Ti2Cl9]−, [Ti2Cl10]2− (see figure above), and [TiCl6]2−.[15] The reaction of chloride ions with TiCl4 depends on the counterion. NBu4Cl and TiCl4 gives the pentacoordinate complex NBu4TiCl5, whereas smaller NEt+
4 gives (NEt4)2Ti2Cl10. These reactions highlight the influence of electrostatics on the structures of compounds with highly ionic bonding.

Redox[]

Reduction of TiCl4 with aluminium results in one-electron reduction. The trichloride (TiCl3) and tetrachloride have contrasting properties: the trichloride is a solid, being a coordination polymer, and is paramagnetic. When the reduction is conducted in THF solution, the Ti(III) product converts to the light-blue adduct TiCl3(THF)3.

Organometallic chemistry[]

Main article: Organotitanium compound

The organometallic chemistry of titanium typically starts from TiCl4. An important reaction involves sodium cyclopentadienyl to give titanocene dichloride, TiCl2(C5H5)2. This compound and many of its derivatives are precursors to Ziegler–Natta catalysts. Tebbe's reagent, useful in organic chemistry, is an aluminium-containing derivative of titanocene that arises from the reaction of titanocene dichloride with trimethylaluminium. It is used for the "olefination" reactions.

Arenes, such as C6(CH3)6 react to give the piano-stool complexes [Ti(C6R6)Cl3]+ (R = H, CH3; see figure above).[16] This reaction illustrates the high Lewis acidity of the TiCl+
3 entity, which is generated by abstraction of chloride from TiCl4 by AlCl3.

Reagent in organic synthesis[]

TiCl4 finds occasional use in organic synthesis, capitalizing on its Lewis acidity, its oxophilicity, and the electron-transfer properties of its reduced titanium halides[17] It is used in the Lewis acid catalysed aldol addition[18] Key to this application is the tendency of TiCl4 to activate aldehydes (RCHO) by formation of adducts such as (RCHO)TiCl4OC(H)R.

Toxicity and safety considerations[]

Hazards posed by titanium tetrachloride generally arise from the release of highly irritating hydrogen chloride vapor. TiCl4 is a strong Lewis acid, exothermically forming adducts with even weak bases such as THF and explosively with water, releasing HCl.

References[]

  1. ^ Eremenko, B. V.; Bezuglaya, T. N.; Savitskaya, A. N.; Malysheva, M. L.; Kozlov, I. S.; Bogodist, L. G. (2001). "Stability of Aqueous Dispersions of the Hydrated Titanium Dioxide Prepared by Titanium Tetrachloride Hydrolysis". Colloid Journal. 63 (2): 173–178. doi:10.1023/A:1016673605744. S2CID 93971747.
  2. ^ "titanium(IV) chloride, 1M soln. in dichloromethane". Alfa Aesar. Alfa Aesar. Retrieved 7 March 2018.
  3. ^ "Titanium(IV) chloride solution 1.0 M in toluene". Sigma-Aldrich. Retrieved 7 March 2018.
  4. ^ Butts, Edward H De. "patent US3021349A".
  5. ^ a b Zumdahl, Steven S. (2009). Chemical Principles (6th ed.). Houghton-Mifflin. p. A23. ISBN 978-0-618-94690-7.
  6. ^ "Classifications - CL Inventory". echa.europa.eu.
  7. ^ [1] American Chemistry Council – "Titanium Tetrachloride: Stepping Stone to Amazing Technology"
  8. ^ "Archived copy". Archived from the original on 2014-03-19. Retrieved 2013-04-10.CS1 maint: archived copy as title (link) Iowa State University – "Chemistry Material Safety Data Sheets"
  9. ^ Webb, S. P.; Gordon, M. S. (1999). "Intermolecular Self-Interactions of the Titanium Tetrahalides TiX4 (X = F, Cl, Br)". J. Am. Chem. Soc. 121 (11): 2552–2560. doi:10.1021/ja983339i.
  10. ^ Manzer, L. E. (1982). Tetrahydrofuran Complexes of Selected Early Transition Metals. Inorganic Syntheses. 21. pp. 135–40. doi:10.1002/9780470132524.ch31. ISBN 978-0-470-13252-4.
  11. ^ a b Völz, Hans G.; et al. (2006). "Pigments, Inorganic". Inorganic Pigments. Ullmann's Encyclopedia of Industrial Chemistry. Weinheim: Wiley-VCH. doi:10.1002/14356007.a20_243.pub2. ISBN 978-3527306732.
  12. ^ The Royal Navy at War (DVD). London: Imperial War Museum. 2005.
  13. ^ Bradey, D. C.; Thomas, M. (1960). "Some Dialkylamino-derivatives of Titanium and Zirconium". J. Chem. Soc.: 3857–3861. doi:10.1039/JR9600003857.
  14. ^ M. E. Davie; T. Foerster; S. Parsons; C. Pulham; D. W. H. Rankin; B. A. Smart (2006). "The Crystal Structure of Tetrakis(dimethylamino)titanium(IV)". Polyhedron. 25 (4): 923–929. doi:10.1016/j.poly.2005.10.019.
  15. ^ Creaser, C. S.; Creighton, J. A. (1975). "Pentachloro- and Pentabromotitanate(IV) ions". Dalton Trans. (14): 1402–1405. doi:10.1039/DT9750001402.
  16. ^ Calderazzo, F.; Ferri, I.; Pampaloni, G.; Troyanov, S. (1996). "η6-Arene Derivatives of Titanium(IV), Zirconium(IV) and Hafnium(IV)". J. Organomet. Chem. 518 (1–2): 189–196. doi:10.1016/0022-328X(96)06194-3.
  17. ^ Gundersen, L.-L.; Rise, F.; Undheim, K. (2004). "Titanium(IV) chloride". In Paquette, L. (ed.). Encyclopedia of Reagents for Organic Synthesis. New York, NY: J. Wiley & Sons.
  18. ^ Mariappan Periasamy (2002): "New synthetic methods using the TiCl4-NR3 reagent system", ARKIVOC, p. 151-166.

General reading[]

  • Holleman, A. F.; Wiberg, E. (2001). Inorganic Chemistry. San Diego, CA: Academic Press. ISBN 978-0-12-352651-9.
  • Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. ISBN 978-0-08-037941-8.

External links[]

Retrieved from ""